S912XEQ512F0MAG - 16-bit MCU, 512KB Flash, 50MHz, AEC-Q100 | NXP
Артикул: S912XEQ512F0MAG ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.42 | $164,20 |
| 100 | $14.2 | $1.420,00 |
| 500 | $12.05 | $6.025,00 |
| 1.000 | $10.85 | $10.850,00 |
S912XEQ512F0MAG Обзор
An automotive microcontroller (MCU) is a microcontroller unit specifically qualified for the harsh electrical and thermal environments of vehicle electronics. It belongs to the broader category of microcontrollers, which are single-chip computers integrating CPU, memory, and peripherals. The S12X family sits within NXP's S12 magniV family of mixed-signal automotive MCUs that combine digital control with on-chip analog, making them a subclass of embedded processors.
Key features include 12-bit ADC with 3 us conversion time, an Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), and flexible hardware-emulated EEPROM. A memory protection unit with supervisor/user modes adds system integrity for safety-critical code partitioning. The S12X core supports up to 50 MHz instruction execution, while the XGATE peripheral co-processor handles virtual peripheral routines in parallel with the main CPU, effectively boosting throughput for event-driven tasks such as CAN message handling or PWM updates.
Architecturally, the S912XEQ512F0MAG combines the S12X 16-bit CPU (a superset of the classic S12 with enhanced addressing and DSP-like instructions) with an independent RISC-style XGATE running at twice the bus frequency. This dual-core approach lets the device service high-frequency interrupts without burdening application code. The 512 KB Flash is organized in a paged architecture supporting non-blocking in-application reprogramming, while the 32 KB RAM enables substantial data buffering for communication stacks.
Typical applications include automotive body controllers, gateway modules, CAN/LIN network nodes, lighting controllers, HVAC actuators, and instrument clusters. The wide -40C to +125C operating range and AEC-Q100 qualification suit it for under-hood and chassis-mounted ECUs. Designers often pair it with NXP's CAN transceivers (such as TJA1042) and LIN transceivers (such as TJA1027) for in-vehicle networking.
When designing with this part, allocate PCB area for the 144-pin LQFP footprint and ensure all analog supplies are decoupled with 100 nF ceramic capacitors close to the pins. Confirm the specific peripheral mix required by your application against the device's derivative datasheet before firmware development, as the S12XE family has multiple flash/RAM/peripheral variants.
This page synthesizes distributor pricing, AEC-Q100 drop-in alternatives within the S12X family, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для S912XEQ512F0MAG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с S912XEQ512F0MAG (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Timers, Co-processor, Core.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
S912XET512J2VAGR
✅ Прямая замена✓ В наличии
$1 / шт.
Открыть даташит →S912XEG384J2VAL
✅ Прямая замена✓ В наличии
$17.8 / шт.
Открыть даташит →S912XEG256J2CAL
✅ Прямая замена✓ В наличии
$15.4 / шт.
Открыть даташит →MC9S12XEQ384CAG
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →MC9S12XDT512MAA
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →MC9S12XEP768CAG
✅ Прямая замена✓ В наличии
$19.85 / шт.
Открыть даташит →S912XEQ512F0MAG Максимальные параметры и электрические характеристики
| Core | S12X (16-bit) |
| Co-processor | XGATE (RISC peripheral engine) |
| Bus Speed | 50 MHz |
| Program Flash | 512 KB |
| SRAM | 32 KB |
| EEPROM | Hardware-emulated, programmable |
| ADC | 12-bit, 3 us conversion time |
| Timers | ECT (Enhanced Capture Timer), PIT, RTI |
| Memory Protection | MPU with supervisor/user modes |
| Корпус | LQFP-144 (LFQFP) |
| Terminal Form | Gull-wing |
| Тип монтажа | Surface Mount |
| Temperature Grade | Automotive, -40C to +125C |
| Qualification | AEC-Q100 |
| Напряжение питания | 1.8 V (core logic reference) |
| Статус RoHS | Compliant |
Конфигурация выводов S912XEQ512F0MAG
| Контакт 1 | PE0/XIRQ — Port E bit 0 / external interrupt |
| Контакт 2 | PE1/IRQ — Port E bit 1 / interrupt request |
| Контакт 3 | PE2 — Port E bit 2 |
| Контакт 4 | PE3 — Port E bit 3 |
| Контакт 5 | PE4 — Port E bit 4 |
| Контакт 6 | PE5/MODA — Port E bit 5 / mode select A |
| Контакт 7 | PE6/MODB — Port E bit 6 / mode select B |
| Контакт 8 | PE7/MODC — Port E bit 7 / mode select C |
| Контакт 9 | BKGD — Background debug mode pin |
| Контакт 10 | RESET — External reset input |
| Контакт 11 | TEST — Test mode pin (must be tied to VSS) |
| Контакт 12 | VDDR — Voltage regulator supply |
| Контакт 13 | VSS — Digital ground |
| Контакт 14 | VDD — Digital supply voltage |
| Контакт 15 | VSS — Digital ground |
| Контакт 16 | VDDPLL — PLL supply voltage |
| Контакт 17 | VSSPLL — PLL ground |
| Контакт 18 | XTAL — Crystal oscillator input |
| Контакт 19 | EXTAL — External clock input |
| Контакт 20 | XFC — PLL external filter capacitor |
| Контакт 21 | VDDA — Analog supply voltage |
| Контакт 22 | VSSA — Analog ground |
| Контакт 23 | VRH — ADC high reference voltage |
| Контакт 24 | VRL — ADC low reference voltage |
| Контакт 25 | PAD00 — Port AD bit 0 (ADC input) |
| Контакт 26 | PAD01 — Port AD bit 1 (ADC input) |
| Контакт 27 | PAD02 — Port AD bit 2 (ADC input) |
| Контакт 28 | PAD03 — Port AD bit 3 (ADC input) |
| Контакт 29 | PAD04 — Port AD bit 4 (ADC input) |
| Контакт 30 | PAD05 — Port AD bit 5 (ADC input) |
| Контакт 31 | PAD06 — Port AD bit 6 (ADC input) |
| Контакт 32 | PAD07 — Port AD bit 7 (ADC input) |
| Контакт 33 | PAD08 — Port AD bit 8 (ADC input) |
| Контакт 34 | PAD09 — Port AD bit 9 (ADC input) |
| Контакт 35 | PAD10 — Port AD bit 10 (ADC input) |
| Контакт 36 | PAD11 — Port AD bit 11 (ADC input) |
| Контакт 37 | PAD12 — Port AD bit 12 (ADC input) |
| Контакт 38 | PAD13 — Port AD bit 13 (ADC input) |
| Контакт 39 | PAD14 — Port AD bit 14 (ADC input) |
| Контакт 40 | PAD15 — Port AD bit 15 (ADC input) |
| Контакт 41 | VDD — Digital supply voltage |
| Контакт 42 | VSS — Digital ground |
| Контакт 43 | PM0 — Port M bit 0 |
| Контакт 44 | PM1 — Port M bit 1 |
| Контакт 45 | PM2 — Port M bit 2 |
| Контакт 46 | PM3 — Port M bit 3 |
| Контакт 47 | PM4 — Port M bit 4 |
| Контакт 48 | PM5 — Port M bit 5 |
| Контакт 49 | PM6 — Port M bit 6 |
| Контакт 50 | PM7 — Port M bit 7 |
| Контакт 51 | PJ0 — Port J bit 0 |
| Контакт 52 | PJ1 — Port J bit 1 |
| Контакт 53 | PJ2 — Port J bit 2 |
| Контакт 54 | PJ3 — Port J bit 3 |
| Контакт 55 | PJ4 — Port J bit 4 |
| Контакт 56 | PJ5 — Port J bit 5 |
| Контакт 57 | PJ6 — Port J bit 6 |
| Контакт 58 | PJ7 — Port J bit 7 |
| Контакт 59 | PK0 — Port K bit 0 |
| Контакт 60 | PK1 — Port K bit 1 |
| Контакт 61 | PK2 — Port K bit 2 |
| Контакт 62 | PK3 — Port K bit 3 |
| Контакт 63 | PK4 — Port K bit 4 |
| Контакт 64 | PK5 — Port K bit 5 |
| Контакт 65 | PK6 — Port K bit 6 |
| Контакт 66 | PK7 — Port K bit 7 |
| Контакт 67 | PS0/RXD0 — Port S bit 0 / SCI0 RX |
| Контакт 68 | PS1/TXD0 — Port S bit 1 / SCI0 TX |
| Контакт 69 | PS2/RXD1 — Port S bit 2 / SCI1 RX |
| Контакт 70 | PS3/TXD1 — Port S bit 3 / SCI1 TX |
| Контакт 71 | PS4/MISO0 — Port S bit 4 / SPI0 MISO |
| Контакт 72 | PS5/MOSI0 — Port S bit 5 / SPI0 MOSI |
| Контакт 73 | PS6/SCK0 — Port S bit 6 / SPI0 SCK |
| Контакт 74 | PS7/SS0 — Port S bit 7 / SPI0 SS |
| Контакт 75 | PT0/IOC0 — Port T bit 0 / timer channel 0 |
| Контакт 76 | PT1/IOC1 — Port T bit 1 / timer channel 1 |
| Контакт 77 | PT2/IOC2 — Port T bit 2 / timer channel 2 |
| Контакт 78 | PT3/IOC3 — Port T bit 3 / timer channel 3 |
| Контакт 79 | PT4/IOC4 — Port T bit 4 / timer channel 4 |
| Контакт 80 | PT5/IOC5 — Port T bit 5 / timer channel 5 |
| Контакт 81 | PT6/IOC6 — Port T bit 6 / timer channel 6 |
| Контакт 82 | PT7/IOC7 — Port T bit 7 / timer channel 7 |
| Контакт 83 | PWM0 — PWM channel 0 output |
| Контакт 84 | PWM1 — PWM channel 1 output |
| Контакт 85 | PWM2 — PWM channel 2 output |
| Контакт 86 | PWM3 — PWM channel 3 output |
| Контакт 87 | PWM4 — PWM channel 4 output |
| Контакт 88 | PWM5 — PWM channel 5 output |
| Контакт 89 | PWM6 — PWM channel 6 output |
| Контакт 90 | PWM7 — PWM channel 7 output |
| Контакт 91 | CAN0TX — CAN0 transmit output |
| Контакт 92 | CAN0RX — CAN0 receive input |
| Контакт 93 | CAN1TX — CAN1 transmit output |
| Контакт 94 | CAN1RX — CAN1 receive input |
| Контакт 95 | VDD — Digital supply voltage |
| Контакт 96 | VSS — Digital ground |
| Контакт 97 | PA0 — Port A bit 0 |
| Контакт 98 | PA1 — Port A bit 1 |
| Контакт 99 | PA2 — Port A bit 2 |
| Контакт 100 | PA3 — Port A bit 3 |
| Контакт 101 | PA4 — Port A bit 4 |
| Контакт 102 | PA5 — Port A bit 5 |
| Контакт 103 | PA6 — Port A bit 6 |
| Контакт 104 | PA7 — Port A bit 7 |
| Контакт 105 | PB0 — Port B bit 0 |
| Контакт 106 | PB1 — Port B bit 1 |
| Контакт 107 | PB2 — Port B bit 2 |
| Контакт 108 | PB3 — Port B bit 3 |
| Контакт 109 | PB4 — Port B bit 4 |
| Контакт 110 | PB5 — Port B bit 5 |
| Контакт 111 | PB6 — Port B bit 6 |
| Контакт 112 | PB7 — Port B bit 7 |
| Контакт 113 | PC0 — Port C bit 0 |
| Контакт 114 | PC1 — Port C bit 1 |
| Контакт 115 | PC2 — Port C bit 2 |
| Контакт 116 | PC3 — Port C bit 3 |
| Контакт 117 | PC4 — Port C bit 4 |
| Контакт 118 | PC5 — Port C bit 5 |
| Контакт 119 | PC6 — Port C bit 6 |
| Контакт 120 | PC7 — Port C bit 7 |
| Контакт 121 | PD0 — Port D bit 0 |
| Контакт 122 | PD1 — Port D bit 1 |
| Контакт 123 | PD2 — Port D bit 2 |
| Контакт 124 | PD3 — Port D bit 3 |
| Контакт 125 | PD4 — Port D bit 4 |
| Контакт 126 | PD5 — Port D bit 5 |
| Контакт 127 | PD6 — Port D bit 6 |
| Контакт 128 | PD7 — Port D bit 7 |
| Контакт 129 | PF0 — Port F bit 0 |
| Контакт 130 | PF1 — Port F bit 1 |
| Контакт 131 | PF2 — Port F bit 2 |
| Контакт 132 | PF3 — Port F bit 3 |
| Контакт 133 | PF4 — Port F bit 4 |
| Контакт 134 | PF5 — Port F bit 5 |
| Контакт 135 | PF6 — Port F bit 6 |
| Контакт 136 | PF7 — Port F bit 7 |
| Контакт 137 | VDD — Digital supply voltage |
| Контакт 138 | VSS — Digital ground |
| Контакт 139 | PG0 — Port G bit 0 |
| Контакт 140 | PG1 — Port G bit 1 |
| Контакт 141 | PG2 — Port G bit 2 |
| Контакт 142 | PG3 — Port G bit 3 |
| Контакт 143 | PG4 — Port G bit 4 |
| Контакт 144 | PG5 — Port G bit 5 |
Типичное применение
S912XEQ512F0MAG подходит для 6 применениеs: Automotive Body Control Module, CAN Gateway Module, HVAC Climate Controller, Instrument Cluster Driver, Lighting Control ECU, Battery Management Slave Module.
Automotive Body Control Module
The S912XEQ512F0MAG fits automotive body controllers because its 50 MHz S12X core with XGATE co-processor can service multiple LIN and CAN message handlers simultaneously while the main CPU runs lighting and accessory logic. The 512 KB Flash holds BCM application code plus bootloader, and 32 KB SRAM buffers network frames without dropping messages. AEC-Q100 qualification at -40C to +125C allows direct mounting in dash or door modules. Place the MCU near CAN transceivers such as TJA1042 with proper ground isolation.
Рекомендуется
CAN Gateway Module
In a CAN-to-CAN gateway, the S912XEQ512F0MAG's dual CAN modules and XGATE co-processor let it route messages between body and powertrain buses at full bus load. Its 50 MHz bus speed and 12-bit ADC support signal monitoring, while 512 KB Flash accommodates routing tables and message-filter configurations. The 144-pin LQFP exposes all CAN, SPI, and SCI pins required for multi-bus architectures, and AEC-Q100 qualification supports chassis-mounted installation.
Рекомендуется
HVAC Climate Controller
The S912XEQ512F0MAG's 12-bit ADC with 3 us conversion time accurately reads multiple temperature and humidity sensors across HVAC zones, while its Enhanced Capture Timer drives blower-motor PWM and damper-stepper control. The 512 KB Flash stores climate-control firmware, lookup tables for airflow mapping, and diagnostic routines. AEC-Q100 and 125C rating support interior-mounted climate ECU placement. Pair with high-side drivers for actuator switching.
Рекомендуется
Instrument Cluster Driver
Driving an automotive instrument cluster, the S912XEQ512F0MAG uses its ECT and PIT timers to manage gauge stepper-motor PWM, indicator lamps, and warning-buzzer timing while the XGATE handles CAN message reception for speed and RPM data. The 32 KB SRAM holds refresh buffers for the gauge display logic. With 144 pins, the LQFP exposes all required peripheral channels including SPI for display-driver ICs. AEC-Q100 ensures reliable operation across cabin thermal cycles.
Рекомендуется
Lighting Control ECU
The S912XEQ512F0MAG runs LED matrix drivers and adaptive-headlamp algorithms with deterministic PWM timing from its Enhanced Capture Timer, while its CAN module handles communication with the central body controller. The 512 KB Flash holds LED-driver calibration tables and fault-diagnostic firmware, and 32 KB SRAM supports per-channel dimming buffers. AEC-Q100 qualification and 144-pin LQFP support in-line mounting inside headlamp assemblies up to 125C.
Рекомендуется
Battery Management Slave Module
As a slave cell-monitoring controller in a battery management system, the S912XEQ512F0MAG's 12-bit ADC measures multiple cell voltages via its fast 3 us conversion, while the SPI module communicates with the master BMS controller. The XGATE offloads cell-balancing PWM from the main CPU, freeing it for state-of-charge calculations. AEC-Q100 qualification and the wide automotive temperature range suit under-hood or pack-mounted deployment. Use isolated SPI for high-voltage isolation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для S912XEQ512F0MAG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | S912XET512J2VAGR | S912XEG384J2VAL | S912XEG256J2CAL | MC9S12XEQ384CAG | MC9S12XDT512MAA | MC9S12XEP768CAG |
|---|---|---|---|---|---|---|---|
| Package | LQFP-144 (LFQFP) | LQFP-144 (LFQFP) - same | LQFP-144 (LFQFP) - same | LQFP-144 (LFQFP) - same | LQFP-144 (LFQFP) - same | LQFP-144 (LFQFP) - same | LQFP-144 (LFQFP) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors (Freescale) | NXP Semiconductors (Freescale) | NXP Semiconductors (Freescale) |
| Core | S12X (16-bit, 50 MHz) | S12XET (16-bit) | S12XEG (16-bit) | S12XEG (16-bit) | HCS12X (16-bit) | S12XD (16-bit) | S12XEP (16-bit) |
| Flash | 512 KB | 512 KB | 384 KB | 256 KB | 384 KB | 512 KB | 768 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 24 KB | 32 KB | 64 KB |
| XGATE Co-processor | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Temperature Grade | -40C to +125C (Automotive) | -40C to +105C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +125C |
| AEC-Q100 | Qualified | Qualified | Qualified | Qualified | Qualified | Qualified | Qualified |
Ключевые отличия
- Higher 50 MHz CPU speed compared to F1-grade variants (против S912XEQ512F1MALR)
- 512 KB Flash at full 144-pin LQFP with AEC-Q100 (против S912XEG256J2CAL)
- Extended automotive temperature grade -40C to +125C (против S912XEQ512J3VAG)
Заметки по проектированию
The S912XEQ512F0MAG requires careful power decoupling: place a 100 nF ceramic capacitor close to each VDD pin and a bulk 4.7 uF tantalum or ceramic on the VDDR pin to stabilize the internal voltage regulator. The VDDA analog supply must be filtered separately from VDD to prevent ADC noise coupling. Connect VSS and VSSA to a single-point ground to avoid ground-loop ADC errors. Reference the NXP S12XE reference manual section on power distribution.
At 50 MHz CPU and active XGATE co-processor, the LQFP-144 package dissipates roughly 0.4 W under typical automotive workloads; the 144-pin LQFP exposes a moderate die-pad area for heat transfer. Keep the junction temperature below 150C by ensuring ambient stays within -40C to +125C and providing adequate PCB copper pour. Estimated: based on typical S12X current consumption of approximately 50 mA at 5 V core supply.
Do not confuse the F0 (50 MHz) and F1 (40 MHz) speed grades - they require different PLL configurations. Verify the BKGD pin is properly pulled up for debug mode entry; leaving it floating prevents BDM access. The TEST pin must be tied to VSS or the device will not exit reset. Confirm XGATE firmware is loaded before relying on peripheral offload, otherwise interrupts will not be serviced correctly.
Route the CAN bus differential pair (CAN0TX/CAN0RX and CAN1TX/CAN1RX) as a 120-ohm-impedance matched pair with ground isolation; keep traces short and avoid splitting the ground plane beneath them. Place the 4.7 kohm CAN termination near the transceiver, not near the MCU. Shield the crystal traces (XTAL/EXTAL) and keep them away from switching signals to prevent clock jitter.
Информация о соответствии
AEC-Q100 automotive qualification per NXP S12XE family datasheet. RoHS and REACH compliance confirmed via NXP product environmental documentation. Lead-free packaging (matte-tin finish) per NXP lead-free roadmap.
