S9S08DZ96F2VLH - 40MHz 96KB Flash CAN MCU | NXP
Teilenummer: S9S08DZ96F2VLH ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.6876 | $4,69 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
S9S08DZ96F2VLH Übersicht
A microcontroller is a programmable semiconductor that combines a CPU, memory, and peripherals on one integrated circuit. This S08D device belongs to the 8-bit microcontroller hierarchy, where the CPU processes embedded control tasks and connected peripherals handle communication, timing, data acquisition, and output functions. Its embedded CAN controller makes it suitable for distributed vehicle, industrial, and equipment-control networks, while the LCD driver supports human-interface or display-oriented designs without relying entirely on an external display controller.
The main feature set includes 96 KB of flash for firmware, 6 KB of RAM for working data, 2 KB of EEPROM for nonvolatile parameters, embedded CAN, an LCD driver, and a maximum 40 MHz bus frequency. These resources allow the MCU to combine control logic, communication, and persistent configuration in one package. The 64-LQFP package provides 64 external terminals and is suitable for conventional surface-mount PCB assembly.
S9S08DZ96F2VLH belongs to the S08D family, identified in the retrieved data as an automotive and industrial-oriented 8-bit family with scalable migration and embedded CAN capability. The architecture is intended to balance real-time control with compact code size and low system complexity. Designers should consult the manufacturer datasheet for exact peripheral availability, electrical limits, clock configuration, and pin multiplexing before finalizing a new design.
Typical uses include automotive body and powertrain-adjacent modules, industrial controllers, CAN-connected sensors, equipment interfaces, and compact embedded control products. Because the supplied evidence identifies embedded CAN, LCD driving, flash, RAM, EEPROM, and the 40 MHz bus, these are the strongest application areas for this part. A system requiring additional external memory, different communication protocols, or a different package should be reviewed against the current datasheet.
The principal design consideration is package and pin compatibility. S9S08DZ96F2VLH uses a 64-LQFP footprint, so any substitution must preserve the exact pin arrangement, electrical limits, clock behavior, memory map, and peripheral functions. The retrieved data does not provide a verified alternate manufacturer part, so production sourcing should be based on the NXP ordering information and current manufacturer documentation.
This product summary consolidates the verified NXP product description, distributor listings, package information, and application-relevant details into an engineering-oriented reference. It also identifies where the available evidence is incomplete, rather than estimating technical values, pricing, or replacement specifications that were not supplied.
Drop-in-Alternativen für S9S08DZ96F2VLH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit S9S08DZ96F2VLH (gleiche Bauform und Footprint) – abweichend in Package, Flash Memory, Automotive Qualification, Core, Product Type.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
S9S08DV128F2CLFR
✅ Drop-In✓ Auf Lager
$6.279 / Stück
Datenblatt ansehen →S9S08DV96F2CLL
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →S9S08DZ96F2VLH Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit microcontroller |
| CPU Core | HCS08 |
| Maximum CPU or Bus Frequency | 40 MHz |
| Flash Memory | 96 KB |
| RAM | 6 KB |
| EEPROM | 2 KB |
| Communication Peripheral | Embedded CAN |
| Display Peripheral | LCD driver |
| Versorgungsspannung | 3.3 V or 5 V |
| Gehäuse | 64-LQFP (10 mm x 10 mm) |
| Terminal Count | 64 terminals |
| Montageart | Surface mount |
| Memory Architecture | Harvard architecture |
| Datenbusbreite | 8-bit |
| Automotive Orientation | Automotive and industrial embedded-control positioning |
| Embedded Emulation and Debug | On-chip emulation/debug |
| Manufacturer | NXP Semiconductors |
| Lebenszyklusstatus | Active |
S9S08DZ96F2VLH 64-lqfp (10 mm x 10 mm) Pinbelegungsleitfaden
Pinbelegung für S9S08DZ96F2VLH (64-lqfp (10 mm x 10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für S9S08DZ96F2VLH.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
S9S08DZ96F2VLH ist geeignet für 6 Anwendungs: Automotive CAN Control Module, Industrial Equipment Controller, CAN-Connected Sensor Node, Human-Interface Control Panel, Embedded Data Logger, Compact Automotive Accessory Controller.
Automotive CAN Control Module
The S9S08DZ96F2VLH fits an automotive CAN control module because the verified feature set combines an HCS08 8-bit core, 40 MHz maximum frequency, embedded CAN, 96 KB flash, and 2 KB EEPROM. The MCU can manage distributed vehicle messages while retaining configuration and calibration values in EEPROM. Its LCD driver may support a local status display, although the exact CAN timing, transceiver, and automotive qualification details must be confirmed from the official datasheet.
Empfohlen
Industrial Equipment Controller
For an industrial equipment controller, the S9S08DZ96F2VLH provides 96 KB of firmware storage, 6 KB of RAM, and a 40 MHz HCS08 processing core for real-time control tasks. Embedded CAN allows the controller to exchange commands and status with other equipment nodes, while EEPROM can retain calibration and configuration data across power cycles. The 64-LQFP package is suitable for a dedicated surface-mount control board, subject to exact pin and electrical verification.
Empfohlen
CAN-Connected Sensor Node
The S9S08DZ96F2VLH is appropriate for a compact CAN-connected sensor node when the design needs local control, event handling, and nonvolatile parameters. Its 8-bit HCS08 core operates up to 40 MHz, while 6 KB RAM supports short-term measurement buffering and 96 KB flash stores application firmware. The embedded CAN controller reduces the need for a separate communications IC, although sensor analog circuitry and transceiver selection remain external design elements.
Empfohlen
Human-Interface Control Panel
The S9S08DZ96F2VLH can support a compact human-interface control panel because the verified feature set includes an LCD driver alongside embedded CAN and substantial internal memory. Firmware can manage buttons, status indicators, menu logic, and communications while using 2 KB EEPROM for persistent settings. The LCD-driver capability should be checked against the intended display interface, including voltage, segment count, timing, and pin multiplexing, because those details are not included in the retrieved snippets.
Empfohlen
Embedded Data Logger
The S9S08DZ96F2VLH is useful for an embedded data logger that must retain operating parameters while responding to network messages. Its 2 KB EEPROM provides a verified nonvolatile storage area for configuration or event records, while 96 KB flash accommodates application code and 6 KB RAM supports working buffers. In a real design, the engineer must define endurance, write-cycle timing, data retention, and communication protocols from the datasheet rather than assuming generic EEPROM behavior.
Empfohlen
Compact Automotive Accessory Controller
A compact automotive accessory controller can use the S9S08DZ96F2VLH for local logic, CAN communication, and persistent operating data. The 40 MHz HCS08 core provides timing headroom for debouncing, state-machine execution, and message handling, while the LCD driver can assist with a small diagnostic or status display. The device's suitability for a particular vehicle platform still depends on voltage transients, environmental qualification, CAN transceiver selection, and the exact 64-LQFP pinout.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für S9S08DZ96F2VLH – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | S9S08DV128F2CLFR | S9S08DV96F2CLL |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
Wichtigste Unterscheidungsmerkmale
- Integrated CAN and LCD-driver functionality (vs. S9S08DV128F2CLFR)
- Verified memory configuration (vs. S9S08DV96F2CLL)
- 40 MHz S08D control platform (vs. S9S08DV128F2CLFR)
- Compact integrated automotive/industrial positioning (vs. S9S08DV96F2CLL)
Designhinweise
Use the official NXP 64-LQFP land pattern and pin table before routing the PCB. The verified web results identify the package and terminal count but do not provide individual pin names, so power, ground, clock, CAN, LCD, and debug connections must not be inferred from a related S08D part. Keep high-current and clock connections short, preserve the package orientation, and validate the footprint with the exact mechanical drawing.
Plan the 3.3 V or 5 V supply architecture only after checking the exact electrical limits and pin assignments in the NXP datasheet. The retrieved evidence does not identify supply current, voltage tolerances, internal regulators, or decoupling requirements. Follow the manufacturer's recommended power, ground, and decoupling layout, and include appropriate local bulk and bypass capacitance at the device pins. Do not assume that a 3.3 V or 5 V description alone defines the complete power design.
Do not substitute a similar S08D part based only on the family name, package family, or distributor search result. A valid replacement must be checked against the exact 64-LQFP pinout, supply voltage, clock limits, memory map, CAN and LCD functions, EEPROM behavior, and required automotive or industrial qualification. The supplied alternatives search did not verify a fully drop-in replacement, so production substitution should be treated as a controlled engineering review.
Keep CAN routing isolated from sensitive analog or timing paths and follow the electrical requirements of the selected transceiver, termination, and protection network. The MCU's embedded CAN controller does not include the external physical-layer interface. Likewise, the LCD-driver capability requires confirmation of segment count, display voltage, timing, and multiplexed pin assignments. A schematic and layout review against the exact datasheet are necessary before fabrication.
The supplied data confirms a 64-LQFP package but does not provide thermal resistance, maximum junction temperature, or power dissipation limits. Thermal performance must therefore be calculated from the exact operating voltage, current, ambient temperature, PCB copper area, and package data in the official documentation. Do not use the 40 MHz clock frequency as a thermal specification; switching activity and actual load conditions determine dissipated power.
Compliance-Informationen
The retrieved product descriptions identify automotive and industrial positioning but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance must be confirmed from the current NXP product documentation and applicable supply-chain documentation.