Skyworks Solutions

SI3211-E-GM - 38-QFN ProSLIC Telecom Interface | Skyworks

Артикул: SI3211-E-GM ✗ Снят с производства
3.3 V or 5 V Vdss 88 mA Id 38-QFN with exposed pad Package
MOQ: 1 |

SI3211-E-GM Обзор

The Skyworks Solutions Inc. SI3211-E-GM is a highly integrated ProSLIC subscriber line interface circuit that combines SLIC, codec, and battery-generation functionality in a 38-QFN package measuring 5 x 7 mm. The device supports 3.3 V and 5 V supply rails and is designed for compact analog telephone interface designs.

A subscriber line interface circuit, or SLIC, is the analog front end used to connect a telecommunications line to a digital voice codec. A ProSLIC integrates these traditionally separate functions into one low-voltage CMOS device. Within the semiconductor hierarchy, the SI3211-E-GM belongs to the telephone interface IC family, combining analog line driving, voice conversion, battery generation, and signaling control.

The SI3211-E-GM supports one telephone channel and features software-configurable internal ringing up to 90 VPK. Its telephone signaling capabilities include DTMF generation and decoding and Caller ID generation. These integrated functions reduce the need for separate line-interface circuitry while giving the host processor control over configurable line behavior.

The device operates from either 3.3 V or 5 V and has a typical supply current of 88 mA. A typical power consumption of 700 mW is specified for this operating condition. The exposed-pad QFN construction also provides a direct thermal path from the die to the PCB, allowing thermal performance to be managed through the ground-plane and copper area beneath the package.

Typical uses include analog telephone adapters, voice-over-IP terminal equipment, digital PBX line cards, Caller ID equipment, and other single-line telecom products. Its integration is especially useful when a compact design needs ringing, DTMF, Caller ID, voice conversion, and battery generation in one low-voltage package.

PCB design should follow the manufacturer’s pin and land-pattern instructions, with particular attention to the exposed pad and analog line connections. Decoupling capacitors should be placed close to their supply pins, while high-current and sensitive signal paths should use short, appropriately routed copper. Thermal review is necessary when the device operates near the maximum ambient temperature or inside a sealed terminal enclosure.

This page combines the manufacturer’s device description, package information, electrical characteristics, application guidance, sourcing structure, and verified replacement analysis. It also highlights where package, temperature-range, or regulatory differences can affect a substitution decision and helps engineers distinguish a true drop-in replacement from a merely related member of the Si321x family.

Аналоги без доработки для SI3211-E-GM — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

SI3211-E-GM Характеристики

Device Type ProSLIC Subscriber Line Interface Circuit and CODEC
Number of Channels 1 channel
Supply Voltage Options 3.3 V or 5 V
Typical Supply Current 88 mA
Typical Power Consumption 700 mW
Internal Ringing Voltage Up to 90 VPK
Ringing Configuration Software-configurable internal ringing
DTMF Support Generation and decoding
Caller ID Support Generation
Battery Generation Integrated
Process Technology Low-voltage CMOS
Package Type 38-QFN with exposed pad
Package Dimensions 5 x 7 mm
Число выводов 38 pins
Тип монтажа Surface mount

Руководство по цоколевке SI3211-E-GM в корпусе 5 x 7 mm

Цоколевка для SI3211-E-GM (корпус 5 x 7 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 5 x 7 mm для SI3211-E-GM

Нет подробных данных о распиновке для SI3211-E-GM.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

SI3211-E-GM подходит для 6 применениеs: Voice-over-IP Telephone Adapter, Digital PBX Line Card, Analog Caller ID Terminal, Digital Add-On Telephone, Embedded Voice Messaging Gateway, Industrial Telephone Intercom.

🌐

Voice-over-IP Telephone Adapter

The SI3211-E-GM is suited to a single-line voice-over-IP adapter because it consolidates the analog subscriber line interface, voice codec, and battery-generation functions into one low-voltage CMOS device. Its 3.3 V or 5 V supply support accommodates common embedded telecom platforms, while software-configurable ringing up to 90 VPK reduces the need for a separate ringing circuit. DTMF generation and decoding plus Caller ID generation can be handled locally before voice samples reach the network processor, helping simplify firmware and board partitioning.

📞

Digital PBX Line Card

A digital PBX line card can use the SI3211-E-GM as the per-channel analog termination and signaling device. The integrated codec creates a defined conversion boundary between the telephone line and the card’s digital voice engine, while the battery generator supports line-state control without a discrete battery supply. Operating from 3.3 V or 5 V gives designers flexibility when the line card includes processors with different rail requirements, and the exposed-pad QFN assists heat removal through the PCB.

📱

Analog Caller ID Terminal

The SI3211-E-GM fits an analog Caller ID terminal because Caller ID generation is integrated with the SLIC, codec, and battery-generation circuitry. This consolidated arrangement lowers the number of separate analog interface blocks required for a compact telephone design. Software-configurable internal ringing up to 90 VPK supports programmable ring cadence and voltage behavior, while DTMF generation and decoding provides keypad signaling without a separate tone-processing package.

☎️

Digital Add-On Telephone

A digital add-on telephone can place the SI3211-E-GM at the line-facing end of the product, where the device manages the analog subscriber line, codec, and battery generation. The integrated architecture is valuable in tabletop and wall-mounted products where component count and board area matter. Its 3.3 V or 5 V operation allows alignment with the telephone’s digital and analog subcircuits, and DTMF handling provides a direct path for local keypad signaling.

🎙️

Embedded Voice Messaging Gateway

The SI3211-E-GM can serve as the analog line interface within an embedded voice messaging gateway that connects one PSTN line to embedded voice-processing electronics. Combining the subscriber line interface and codec limits conversion boundaries and reduces external glue logic. The 90 VPK maximum internal ringing capability supports line ringing requirements, while Caller ID and DTMF functions give the gateway access to signaling that can be decoded or generated under host-software control.

🏭

Industrial Telephone Intercom

An industrial telephone intercom can use the SI3211-E-GM when the unit requires one analog line, integrated line power, ringing, and dial-tone signaling. The device’s 88 mA typical supply current and 700 mW typical consumption identify power handling as an important design consideration in compact embedded equipment. The exposed-pad QFN should be connected to the PCB thermal plane as directed by the manufacturer package information, with analog routing kept separate from sensitive processor and clock paths.

What is the SI3211-E-GM?
The SI3211-E-GM is a ProSLIC telecom interface IC that integrates a subscriber line interface circuit, voice codec, and battery-generation circuitry into one low-voltage CMOS device. According to the Si3210/Si3211 manufacturer datasheet, it is intended for single-channel analog telephone interfaces and provides software-configurable ringing, DTMF generation and decoding, and Caller ID generation in a 38-QFN package.
What are the key specifications of SI3211-E-GM?
The SI3211-E-GM supports 3.3 V or 5 V operation and provides one integrated telephone channel in a 38-QFN package measuring 5 x 7 mm. The Si3210/Si3211 manufacturer datasheet also identifies software-configurable internal ringing up to 90 VPK, DTMF generation and decoding, Caller ID generation, 88 mA typical supply current, and 700 mW typical power consumption as principal device characteristics.
Where can I download the SI3211-E-GM datasheet PDF?
The Si3210/Si3211 manufacturer datasheet PDF is available through the document link on this product page. It contains the device description, electrical characteristics, package information, and telephone-signaling functions for SI3211-E-GM. Use the datasheet’s pin-description table and land-pattern guidance when assigning PCB connections and designing the exposed-pad thermal path.
Where can I find the SI3211-E-GM pinout?
The authoritative SI3211-E-GM pin assignment is in the pin-description table and package drawing of the Si3210/Si3211 manufacturer datasheet. The device uses a 38-pin QFN package with an exposed pad, so the exposed thermal pad and its required PCB connection must be identified from that package information. A complete independent pin list is not presented here.
What is the operating voltage of SI3211-E-GM?
The SI3211-E-GM operates from either a 3.3 V or 5 V supply. The Si3210/Si3211 manufacturer datasheet associates this dual-supply capability with a typical supply current of 88 mA and typical power consumption of 700 mW. The correct rail should therefore be selected to match the surrounding low-voltage telecom interface design.
What telephone signaling functions does SI3211-E-GM provide?
The SI3211-E-GM provides DTMF generation and decoding, Caller ID generation, and software-configurable internal ringing up to 90 VPK. According to the Si3210/Si3211 manufacturer datasheet, these functions are integrated into the same ProSLIC device as the subscriber line interface, codec, and battery-generation circuitry, allowing a compact single-line telephone-interface implementation.
What is the difference between SI3211-E-GM and SI3211-E-FTR?
SI3211-E-GM is supplied in a 38-QFN exposed-pad package, while SI3211-E-FTR uses a 38-TSSOP package. Both support 3.3 V or 5 V operation, with a typical current draw of 88 mA and power dissipation of 700 mW. Because their package forms differ, SI3211-E-FTR is not a pin-for-pin drop-in substitute for an existing SI3211-E-GM footprint.
Is SI3211-E-GM suitable for a voice-over-IP adapter?
Yes, the SI3211-E-GM is suitable for a single-line voice-over-IP adapter because it combines the analog subscriber line interface, codec, and battery-generation functions. Its DTMF and Caller ID support, together with configurable ringing up to 90 VPK, can shorten the path from a telephone line to the host digital voice processor while keeping the analog interface in a compact 5 x 7 mm QFN package.
When should I choose SI3211-E-GM for a telecom design?
Choose the SI3211-E-GM when a design requires one integrated analog telephone line with ringing, DTMF, Caller ID, codec, and battery-generation functions in a compact QFN footprint. Its 3.3 V or 5 V supply flexibility suits low-voltage telecom equipment, while the exposed pad provides a practical path for heat transfer into the PCB.
Can SI3211-E-GMR replace SI3211-E-GM?
SI3211-E-GMR is a packaging designation for the SI3211-E-GM device and may provide the same 38-QFN electrical implementation, but the manufacturer suffix must be checked before treating it as a replacement. The cross-reference information identifies no separate confirmed drop-in replacement. Validate the exact suffix, temperature grade, ordering information, pinout, and exposed-pad requirements before approving any substitution.
What is the best drop-in replacement for SI3211-E-GM?
No independently verified cross-brand drop-in replacement for SI3211-E-GM has been established. The available cross-reference results identify the original device and related order variants but do not document another manufacturer’s part as pin-compatible in the same 38-QFN footprint. Use the Request a Quote form on this page to ask about the exact SI3211-E-GM ordering code and any traceable availability options.
What can replace SI3211-E-GM?
The only closely identified replacement is a properly documented ordering variant of the original SI3211-E-GM family after suffix verification. SI3211-E-FTR is electrically similar at a high level but uses a 38-TSSOP package and therefore requires a different PCB footprint. No confirmed cross-brand 38-QFN pin-compatible equivalent is documented, so a board redesign should not be assumed.
Where can I buy SI3211-E-GM online?
Use the Request a Quote form on this page to request current availability, order quantities, and lead time for the exact SI3211-E-GM ordering code. The form is the appropriate channel for quote-based procurement because stock and commercial terms can change independently of the device’s technical characteristics. Include the required package, quantity, and date-code requirements in the request.
How much does SI3211-E-GM cost?
Use the Request a Quote form on this page for the current commercial terms of SI3211-E-GM. Pricing depends on order quantity, production allocation, traceability requirements, and delivery conditions, so a static figure may become stale. The form allows procurement teams to request current quotation terms without relying on an outdated catalog amount.
What is the lead time for SI3211-E-GM?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with the exact ordering suffix, order quantity, packaging requirements, and current manufacturing allocation. For production planning, provide the required quantity, authorized sourcing status, date-code policy, and target delivery date so the commercial response can reflect the actual build schedule.

Справочные инженерные данные для SI3211-E-GM — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the SI3211-E-GM for a compact, single-channel analog telephone design that needs an integrated SLIC, codec, battery generation, DTMF processing, Caller ID generation, and programmable ringing. Its 38-QFN exposed-pad package is particularly appropriate where board area and component count are important and the PCB can provide the specified thermal path. The 3.3 V or 5 V operating options also make it useful across telecom products with different low-voltage system rails. Do not substitute a TSSOP-package variant without redesigning the footprint. No confirmed cross-brand 38-QFN drop-in replacement has been documented, so an existing SI3211-E-GM design should normally retain the original device unless a supplier can provide documented pin compatibility, electrical equivalence, temperature-grade coverage, and lifecycle assurance.

Сравнение с аналогами

Параметр Этот товар
Package 38-QFN with exposed pad, 5 x 7 mm
Brand Skyworks Solutions Inc.
Product Type ProSLIC subscriber line interface circuit and CODEC
Number of Channels 1 channel
Supply Voltage 3.3 V or 5 V
Typical Supply Current 88 mA
Typical Power Consumption 700 mW
Internal Ringing Capability Software-configurable, up to 90 VPK
DTMF Functions Generation and decoding
Caller ID Function Generation

Ключевые отличия

  • Comprehensive single-channel telephone interface integration (против Discrete SLIC and codec implementation)
  • Programmable high-voltage internal ringing (против External ringing-generator architecture)
  • Flexible low-voltage supply support (против Single-rail-only interface design)

Заметки по проектированию

Follow the manufacturer’s 38-QFN land-pattern and exposed-pad instructions exactly. Place input and output decoupling capacitors close to the corresponding device pins, keep the exposed-pad connection continuous with the intended thermal and ground plane, and avoid interrupting the return path beneath the package. These practices reduce supply disturbance and preserve the intended electrical and thermal behavior of the ProSLIC.

Separate the telephone-line and ringing paths from sensitive clock, audio, and digital signal paths where the board geometry allows. Use short return paths and a solid ground reference, and route high-voltage-capable ringing nodes carefully because the internal ringing feature can operate up to 90 VPK. Review isolation distances against the final product’s applicable telephone-interface safety requirements before releasing the layout.

The SI3211-E-GM has a typical power consumption of 700 mW under the stated operating condition. Estimated from that value, the device converts approximately 700 mW into heat at the nominal operating point. Provide copper area beneath the exposed pad and use the package thermal data to determine whether a dedicated heat-spreading pattern is needed, especially at elevated ambient temperature or in a sealed enclosure.

Do not assume that a related Si3211 suffix is automatically interchangeable. SI3211-E-FTR is documented in a 38-TSSOP package, while SI3211-E-GM uses a 38-QFN exposed-pad package. Confirm the ordering suffix, temperature grade, pin assignments, land pattern, and exposed-pad connection before substitution. A functional match does not remove the need for mechanical and pin-level verification.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer datasheet excerpt identifies the device and its integrated telephone-interface functions but does not state the requested compliance classifications. No compliance status has been inferred.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

SI3211-E-GM datasheet SI3211-E-GM pinout SI3211-E-GM datasheet pdf SI3211-E-GM equivalent SI3211-E-GM replacement SI3211-E-GM cross reference SI3211-E-GM footprint SI3211-E-GM price SI3211-E-GM stock Skyworks SI3211-E-GM SI3211-E-GM 38 QFN SI3211-E-GM ProSLIC

Связанные компоненты & термины

Skyworks Solutions Inc. SI3211-E-GM SI3211-E-FTR SI3211-E-GMR ProSLIC subscriber line interface circuit SLIC voice codec telephone interface IC interface IC integrated circuit semiconductor 3.3 V 5 V 88 mA 700 mW 90 VPK DTMF Caller ID battery generation 38-QFN QFN family surface mount voice-over-IP
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ