SI3216-C-FM - 38-QFN Single-Channel SLIC Codec | Skyworks
Артикул: SI3216-C-FM ✓ АктивенSI3216-C-FM Обзор
A Subscriber Line Interface Concept, or SLIC, is an integrated telephone-line interface that connects a communications system to an analog subscriber loop. A SLIC typically handles line-current control, voice-band signal processing, and the analog-to-digital and digital-to-analog conversion required by the voice codec. Within the product hierarchy, the SI3216-C-FM is an interface IC, telecom interface IC, and subscriber line access circuit.
The SI3216-C-FM provides one SLIC channel with dual-mode wideband operation extending to 7 kHz and narrowband operation extending to 3.4 kHz. Its integrated codec supports 16-bit, 16 kHz sampling for enhanced voice processing. These features allow a compact voice endpoint to support both wideband and narrowband calls when the surrounding line interface and network equipment provide the corresponding signaling functions.
The device operates from 3.13 V to 5.25 V and draws 88 mA under the stated operating condition. Its listed power dissipation is 700 mW, which makes thermal design and exposed-pad heat flow important in compact subscriber-premises equipment. The combination of a single-channel architecture, selectable voice bandwidth, and multiple digital interfaces supports centralized channelization where each subscriber line has one associated SLIC channel.
Typical applications include central-office line-card equipment, subscriber-premises equipment, voice-over-IP access circuits, digital loop carriers, and other telephony systems requiring a narrowband or wideband codec. The PCM interface suits equipment transporting voice samples through a digital backplane, while GCI and SPI provide additional options for line-card control and configuration.
Place input and output decoupling capacitors close to the supply pins, connect the exposed pad to a low-impedance ground plane, and follow the manufacturer pin-description table when assigning tracks. Confirm the external feed-resistor value, line-interface topology, and codec clock arrangement against the manufacturer datasheet before releasing a PCB because these details affect line current, voice quality, and signal integrity.
Аналоги без доработки для SI3216-C-FM — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
SI3216M-C-FM
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SI3216-B-FM
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SI3216-C-FM Характеристики
| Product Type | Subscriber Line Interface Concept (SLIC) and CODEC IC |
| Number of Circuits | 1 channel |
| Digital Interfaces | GCI, PCM, and SPI |
| Рабочее напряжение питания | 3.13 V to 5.25 V |
| Typical Supply Current | 88 mA |
| Power Dissipation | 700 mW |
| Рабочая температура | 0 °C to 70 °C |
| Wideband Voice Frequency | Up to 7 kHz |
| Narrowband Voice Frequency | Up to 3.4 kHz |
| Codec Resolution | 16 bit |
| Codec Sampling Rate | 16 kHz |
| Package Type | 38-QFN |
| Package Dimensions | 5 mm x 7 mm |
| Тип монтажа | Surface mount |
| Exposed Pad | Yes |
Руководство по цоколевке SI3216-C-FM в корпусе 5 mm x 7 mm
Цоколевка для SI3216-C-FM (корпус 5 mm x 7 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для SI3216-C-FM.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
SI3216-C-FM подходит для 6 применениеs: Central-Office Line Cards, Subscriber-Premises Equipment, Voice over IP Access Circuits, Digital Loop Carrier Systems, Voice Network Terminals, Telephony Test Equipment.
Central-Office Line Cards
The SI3216-C-FM fits central-office line-card channels that require one analog subscriber-line termination and digital voice transport per circuit. Its single-channel SLIC architecture supports 16-bit 16 kHz codec sampling, while GCI, PCM, and SPI interfaces provide several paths for connecting to line-card control logic. The 3.13 V to 5.25 V operating range supports common telecommunications supply rails. Because the listed power dissipation is 700 mW, the 38-QFN exposed pad needs a low-impedance ground connection and adequate copper area for heat spreading.
Рекомендуется
Subscriber-Premises Equipment
The SI3216-C-FM is suitable for subscriber-premises equipment that terminates an analog voice line and converts it into a digital PCM or SPI-compatible signal. Its dual-mode operation supports narrowband voice to 3.4 kHz and wideband voice to 7 kHz, allowing one codec design to address different service profiles. The 5 mm by 7 mm 38-QFN package supports compact subscriber-line access designs. Pay particular attention to the 700 mW listed dissipation and provide the exposed pad with uninterrupted ground-plane connection and thermal vias.
Рекомендуется
Voice over IP Access Circuits
The SI3216-C-FM can serve as the analog line-facing codec within a voice-over-IP access circuit. PCM connectivity allows digitized voice samples to move toward packetization hardware, while the integrated SLIC handles the subscriber-loop interface. Supporting both 3.4 kHz narrowband and 7 kHz wideband modes provides flexibility across legacy and enhanced voice services. The 88 mA typical supply current and 700 mW power rating should be included in the access-circuit power budget, with layout attention focused on the exposed pad and clean codec supply connections.
Рекомендуется
Digital Loop Carrier Systems
The SI3216-C-FM is appropriate for digital loop carrier line cards requiring a dedicated subscriber-line channel. The device's GCI, PCM, and SPI interfaces support different line-card control and transport architectures, while its single-channel organization allows channel density to scale through repeated line-card circuits. The operating supply of 3.13 V to 5.25 V provides compatibility with 3.3 V and 5 V backplane power systems. Thermal design is important because the stated 700 mW dissipation requires the QFN exposed pad to connect effectively into the board ground plane.
Рекомендуется
Voice Network Terminals
The SI3216-C-FM can support voice network terminals that need an integrated analog subscriber-line interface and codec in a compact surface-mount design. The 38-QFN 5 mm by 7 mm package reduces board area, while narrowband and wideband operating modes support different voice-channel bandwidths. Its 16-bit 16 kHz codec format provides a defined digital voice representation for downstream transport. Engineers should preserve short return paths for digital interfaces, isolate noisy switching nodes from codec ground, and use the manufacturer application circuit as the basis for external feed and filter component values.
Рекомендуется
Telephony Test Equipment
The SI3216-C-FM is suitable for telephony test equipment that must emulate or analyze a subscriber voice channel using controlled narrowband or wideband modes. The PCM and SPI interfaces enable integration with test processors and channel analyzers, while the 3.13 V to 5.25 V supply range simplifies laboratory rail selection. The 700 mW power rating should be checked against the maximum channel duty cycle because continuous voice transmission can maintain substantial thermal load. Follow the manufacturer pin table and typical application circuit to establish test-point access without disturbing sensitive codec routing.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SI3216-C-FM — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | SI3216M-C-FM | SI3216-B-FM |
|---|---|---|---|
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Silicon Labs |
| Package | 38-QFN (5x7) | 38-QFN (5x7) | 38-pin VFQFN |
| Product Type | Single-channel SLIC and CODEC | Single-channel SLIC and CODEC | Single-channel SLIC |
| Number of Circuits | 1 channel | 1 channel | 1 channel |
Ключевые отличия
- Supports wideband and narrowband voice in one single-channel SLIC (против SI3216-B-FM)
- Uses a compact 38-QFN 5 mm by 7 mm footprint with an exposed pad (против SI3216M-C-FM)
- Provides GCI, PCM, and SPI interfaces in one SLIC (против SI3216-B-FM)
Заметки по проектированию
The listed power dissipation is 700 mW, so the exposed pad must be soldered to a continuous ground-plane area and connected with multiple thermal vias where the PCB design permits. Keep the thermal path short by placing the vias near the center of the exposed pad and avoid placing temperature-sensitive components directly beneath the QFN. Validate the final junction temperature using the manufacturer thermal model and the actual copper area, ambient temperature, and airflow in the enclosure.
Use the manufacturer land pattern and pin-description table to define the 38-QFN footprint, exposed pad, and via arrangement. Place supply-decoupling components directly beside the relevant supply and ground pins, and keep their ground returns within the same compact decoupling loop. Confirm pin 1 using the package orientation mark rather than relying only on the land-pattern origin, because an incorrect origin can shift every signal assignment.
Keep PCM, SPI, GCI, and codec clock routes short, with continuous reference planes and no unnecessary stubs. Route sensitive voice and line signals away from switching power nodes and high-current feed paths, and follow the manufacturer's recommended external filter and feed-resistor topology. Clock and digital interface timing should be evaluated with realistic line-card loading because an otherwise correct footprint can still produce degraded signal integrity when traces are poorly terminated.
Do not substitute the device solely because another SI3216 member has a 38-QFN footprint. Verify supply limits, codec mode, digital-interface functions, firmware support, line-feed values, and exposed-pad connections for the exact ordering code. The C and B variants are not necessarily interchangeable in wideband service, and even the M suffix can indicate family-level differences that require design review.
Информация о соответствии
The available product records identify the part and package but do not provide sufficiently clear compliance statements for a definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals determination.