Skyworks Solutions

SI3216-C-FM - 38-QFN Single-Channel SLIC Codec | Skyworks

MPN: SI3216-C-FM ✓ 啟用中
3.13 V to 5.25 V Vdss 88 mA Id 38-QFN Package Up to 7 kHz Speed
MOQ: 1 |

SI3216-C-FM 概覽

Skyworks Solutions Inc. SI3216-C-FM is a single-channel Subscriber Line Interface Concept and codec IC with GCI, PCM, and SPI interfaces, an 88 mA typical supply current, and a 3.13 V to 5.25 V operating supply range. The device is packaged in a 38-QFN surface-mount package measuring 5 mm by 7 mm.

A Subscriber Line Interface Concept, or SLIC, is an integrated telephone-line interface that connects a communications system to an analog subscriber loop. A SLIC typically handles line-current control, voice-band signal processing, and the analog-to-digital and digital-to-analog conversion required by the voice codec. Within the product hierarchy, the SI3216-C-FM is an interface IC, telecom interface IC, and subscriber line access circuit.

The SI3216-C-FM provides one SLIC channel with dual-mode wideband operation extending to 7 kHz and narrowband operation extending to 3.4 kHz. Its integrated codec supports 16-bit, 16 kHz sampling for enhanced voice processing. These features allow a compact voice endpoint to support both wideband and narrowband calls when the surrounding line interface and network equipment provide the corresponding signaling functions.

The device operates from 3.13 V to 5.25 V and draws 88 mA under the stated operating condition. Its listed power dissipation is 700 mW, which makes thermal design and exposed-pad heat flow important in compact subscriber-premises equipment. The combination of a single-channel architecture, selectable voice bandwidth, and multiple digital interfaces supports centralized channelization where each subscriber line has one associated SLIC channel.

Typical applications include central-office line-card equipment, subscriber-premises equipment, voice-over-IP access circuits, digital loop carriers, and other telephony systems requiring a narrowband or wideband codec. The PCM interface suits equipment transporting voice samples through a digital backplane, while GCI and SPI provide additional options for line-card control and configuration.

Place input and output decoupling capacitors close to the supply pins, connect the exposed pad to a low-impedance ground plane, and follow the manufacturer pin-description table when assigning tracks. Confirm the external feed-resistor value, line-interface topology, and codec clock arrangement against the manufacturer datasheet before releasing a PCB because these details affect line current, voice quality, and signal integrity.

直接替換替代品,適用於 SI3216-C-FM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

SI3216M-C-FM

✅ 直接替換
📦 38-QFN (5x7)
Uses the same 38-QFN 5x7 format; the available listing does not quantify voltage, current, or codec differences, so functional equivalence requires datasheet confirmation

📋 參考替代品(不在目錄中)

SI3216-B-FM

✅ 直接替換
📦 38-QFN (5x7)
Same 38-QFN footprint and 3.3 V or 5 V operating class, but the B version is listed as a 60 dB SLIC without the C version's confirmed dual-mode bandwidth

📋 參考替代品(不在目錄中)

SI3216-C-FM 規格

Product Type Subscriber Line Interface Concept (SLIC) and CODEC IC
Number of Circuits 1 channel
Digital Interfaces GCI, PCM, and SPI
工作電源電壓 3.13 V to 5.25 V
Typical Supply Current 88 mA
Power Dissipation 700 mW
工作溫度 0 °C to 70 °C
Wideband Voice Frequency Up to 7 kHz
Narrowband Voice Frequency Up to 3.4 kHz
Codec Resolution 16 bit
Codec Sampling Rate 16 kHz
Package Type 38-QFN
Package Dimensions 5 mm x 7 mm
安裝類型 Surface mount
Exposed Pad Yes

SI3216-C-FM 5 mm x 7 mm 腳位配置指南

SI3216-C-FM(5 mm x 7 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

SI3216-C-FM 的 5 mm x 7 mm 封裝腳位圖

無詳細腳位定義資料: SI3216-C-FM.

請參閱 資料表 以查看完整腳位配置。

典型應用

SI3216-C-FM 適用於 6 應用s: Central-Office Line Cards, Subscriber-Premises Equipment, Voice over IP Access Circuits, Digital Loop Carrier Systems, Voice Network Terminals, Telephony Test Equipment.

🌐

Central-Office Line Cards

The SI3216-C-FM fits central-office line-card channels that require one analog subscriber-line termination and digital voice transport per circuit. Its single-channel SLIC architecture supports 16-bit 16 kHz codec sampling, while GCI, PCM, and SPI interfaces provide several paths for connecting to line-card control logic. The 3.13 V to 5.25 V operating range supports common telecommunications supply rails. Because the listed power dissipation is 700 mW, the 38-QFN exposed pad needs a low-impedance ground connection and adequate copper area for heat spreading.

📞

Subscriber-Premises Equipment

The SI3216-C-FM is suitable for subscriber-premises equipment that terminates an analog voice line and converts it into a digital PCM or SPI-compatible signal. Its dual-mode operation supports narrowband voice to 3.4 kHz and wideband voice to 7 kHz, allowing one codec design to address different service profiles. The 5 mm by 7 mm 38-QFN package supports compact subscriber-line access designs. Pay particular attention to the 700 mW listed dissipation and provide the exposed pad with uninterrupted ground-plane connection and thermal vias.

📱

Voice over IP Access Circuits

The SI3216-C-FM can serve as the analog line-facing codec within a voice-over-IP access circuit. PCM connectivity allows digitized voice samples to move toward packetization hardware, while the integrated SLIC handles the subscriber-loop interface. Supporting both 3.4 kHz narrowband and 7 kHz wideband modes provides flexibility across legacy and enhanced voice services. The 88 mA typical supply current and 700 mW power rating should be included in the access-circuit power budget, with layout attention focused on the exposed pad and clean codec supply connections.

🏭

Digital Loop Carrier Systems

The SI3216-C-FM is appropriate for digital loop carrier line cards requiring a dedicated subscriber-line channel. The device's GCI, PCM, and SPI interfaces support different line-card control and transport architectures, while its single-channel organization allows channel density to scale through repeated line-card circuits. The operating supply of 3.13 V to 5.25 V provides compatibility with 3.3 V and 5 V backplane power systems. Thermal design is important because the stated 700 mW dissipation requires the QFN exposed pad to connect effectively into the board ground plane.

🔧

Voice Network Terminals

The SI3216-C-FM can support voice network terminals that need an integrated analog subscriber-line interface and codec in a compact surface-mount design. The 38-QFN 5 mm by 7 mm package reduces board area, while narrowband and wideband operating modes support different voice-channel bandwidths. Its 16-bit 16 kHz codec format provides a defined digital voice representation for downstream transport. Engineers should preserve short return paths for digital interfaces, isolate noisy switching nodes from codec ground, and use the manufacturer application circuit as the basis for external feed and filter component values.

📺

Telephony Test Equipment

The SI3216-C-FM is suitable for telephony test equipment that must emulate or analyze a subscriber voice channel using controlled narrowband or wideband modes. The PCM and SPI interfaces enable integration with test processors and channel analyzers, while the 3.13 V to 5.25 V supply range simplifies laboratory rail selection. The 700 mW power rating should be checked against the maximum channel duty cycle because continuous voice transmission can maintain substantial thermal load. Follow the manufacturer pin table and typical application circuit to establish test-point access without disturbing sensitive codec routing.

推薦產品摘要

SI3216-C-FM Skyworks Solutions 用於: Central-Office Line Cards, Subscriber-Premises Equipment, Voice over IP Access Circuits, Digital Loop Carrier Systems, Voice Network Terminals, Telephony Test Equipment SI3216M-C-FM Related 38-QFN SLIC family device 用於: Central-Office Line Cards, Voice over IP Access Circuits, Digital Loop Carrier Systems, Telephony Test Equipment SI3216-B-FM Related 38-QFN single-channel SLIC 用於: Subscriber-Premises Equipment, Voice Network Terminals
What are the key specifications of SI3216-C-FM that engineers should know?
The SI3216-C-FM is a single-channel SLIC and codec IC with a 3.13 V to 5.25 V supply range, 88 mA typical supply current, 700 mW power dissipation, and a 38-QFN 5 mm by 7 mm package. It supports GCI, PCM, and SPI interfaces, 16-bit 16 kHz codec sampling, wideband voice to 7 kHz, and narrowband voice to 3.4 kHz. According to the manufacturer datasheet, these functions place the device between a telephone subscriber line and a digital voice-processing system.
What is the operating voltage of SI3216-C-FM?
The SI3216-C-FM operates from 3.13 V to 5.25 V. According to the manufacturer datasheet, this range supports both 3.3 V and 5 V system environments while providing defined operating limits for the integrated SLIC and codec circuitry. Design the local rails with enough tolerance margin for the power-supply accuracy, transient response, and temperature conditions of the target telephony equipment.
What is the package and pin count of SI3216-C-FM?
The SI3216-C-FM uses a 38-pin QFN package measuring 5 mm by 7 mm for surface-mount assembly. The package includes an exposed pad that must be connected to the ground plane to provide electrical and thermal continuity. Use the manufacturer pin-description table and land-pattern guidance when assigning signals because exposed-pad numbering and thermal-via requirements are package-specific.
Where can I download the SI3216-C-FM datasheet PDF?
The SI3216-C-FM datasheet is available from the manufacturer document listing linked on this page, with a directly accessible datasheet index also provided in the datasheet field. Start with the electrical characteristics, pin descriptions, typical application circuit, and exposed-pad layout sections. Request the current manufacturer-controlled PDF through the Request a Quote form if the linked document does not open directly.
Where to find the SI3216-C-FM pinout?
The SI3216-C-FM pinout is defined by the manufacturer pin-description table for its 38-QFN package. Locate the numbered package drawing, confirm pin 1 with the package orientation mark, and assign supply, ground, codec, line-interface, and control signals from that table. Do not infer pin assignments from package position alone, particularly around the exposed thermal pad and its associated ground connections.
Where can I buy SI3216-C-FM online?
The SI3216-C-FM can be requested through the Request a Quote form on this page, which is the recommended route for current commercial availability, quantity requirements, and lead time. The exact orderable part number is SI3216-C-FM in a 38-QFN package. Provide your target quantity, production schedule, and shipment destination so the sourcing request can be matched correctly.
What is the price of SI3216-C-FM?
Current commercial pricing for SI3216-C-FM should be obtained through the Request a Quote form on this page because quotation terms, quantity breaks, and lead time can change. Submit the exact MPN, required quantity, and target delivery date. The structured pricing area on this page is the authoritative source for any price that can be displayed with the current offer.
What is the lead time for SI3216-C-FM?
The current lead time for SI3216-C-FM depends on order quantity, manufacturing availability, and the requested delivery schedule. Use the Request a Quote form on this page to state the required quantity and date. For production planning, include your component forecast and any acceptable alternate date so the sourcing team can return a practical schedule.
Is SI3216-C-FM in stock?
Stock for SI3216-C-FM changes with incoming supply and customer demand, so request current availability through the Request a Quote form on this page. Include the exact quantity required for prototype, qualification, and production builds. A complete availability answer should distinguish immediately schedulable stock from factory lead time and any minimum-order quantity.
What is the difference between SI3216-C-FM and SI3216M-C-FM?
Both SI3216-C-FM and SI3216M-C-FM are identified as single-channel, 38-QFN telecom SLIC and codec devices. The available product information does not establish every electrical or register-level difference, so the manufacturer datasheets should be compared before interchange. Both use the same 5 mm by 7 mm package family, which makes SI3216M-C-FM a candidate for a footprint-level review rather than an automatic substitution.
Is SI3216-C-FM the same as SI3216-B-FM?
No exact equivalence should be assumed between SI3216-C-FM and SI3216-B-FM. SI3216-B-FM is identified as a one-channel, 60 dB, 3.3 V or 5 V SLIC in a 38-pin VFQFN package, while SI3216-C-FM is the C-version dual-mode device. The shared package permits PCB reuse, but firmware, register behavior, voice-bandwidth support, and external circuitry require verification.
When should I choose SI3216-C-FM over SI3216M-C-FM?
Choose SI3216-C-FM when the design specifically requires the C-series dual-mode SLIC behavior, including wideband operation to 7 kHz and narrowband operation to 3.4 kHz. Select SI3216M-C-FM only after comparing its manufacturer datasheet against the required codec, line-interface, digital-interface, and control functions. Both use the 38-QFN format, but package similarity alone does not establish functional interchangeability.
Is SI3216-C-FM suitable for narrowband and wideband voice equipment?
The SI3216-C-FM is suitable for equipment requiring either narrowband or wideband voice processing because it supports both modes in one single-channel SLIC. According to the manufacturer datasheet, narrowband operation reaches 3.4 kHz and wideband operation reaches 7 kHz, with 16-bit 16 kHz codec sampling. The surrounding line network must also support the selected voice mode.
What can replace SI3216-C-FM?
The strongest package-compatible candidates identified for SI3216-C-FM are SI3216M-C-FM and SI3216-B-FM, both associated with the 38-QFN SI3216 family. A confirmed drop-in replacement requires matching pin functions, supply requirements, codec behavior, line-interface characteristics, external component values, and software configuration. Use the manufacturer datasheet comparison before treating either candidate as a production substitution.
What is the best cross-brand equivalent for SI3216-C-FM?
No cross-brand drop-in equivalent for SI3216-C-FM can be confirmed from the available technical records. The SI3216-C-FM combines a proprietary telephony line interface, dual-mode codec, multiple digital interfaces, and a 38-QFN footprint, so a superficially similar interface IC may require different external circuitry or firmware. Select a cross-brand part only after a manufacturer-approved or laboratory-verified pin and functional comparison.

工程參考資料,適用於 SI3216-C-FM — 比較、設計指引及合規資訊。

選型指南

Choose SI3216-C-FM when a design requires one subscriber-line channel, selectable wideband or narrowband voice operation, and a combination of GCI, PCM, and SPI connectivity in a 38-QFN package. Its 3.13 V to 5.25 V range suits both 3.3 V and 5 V systems, while the 700 mW rating requires careful exposed-pad thermal design. Consider SI3216M-C-FM when its manufacturer documentation confirms matching codec, control, line-interface, and firmware requirements while retaining the same package. Consider SI3216-B-FM only for designs that do not require the C version's confirmed wideband-to-7-kHz behavior and can meet the B version's documented interface requirements. No cross-brand option should be selected solely by package appearance because the SLIC line interface, external feed network, digital control, and software support must all remain compatible.

與替代品比較

參數 本產品 SI3216M-C-FM SI3216-B-FM
Brand Skyworks Solutions Inc. Skyworks Solutions Inc. Silicon Labs
Package 38-QFN (5x7) 38-QFN (5x7) 38-pin VFQFN
Product Type Single-channel SLIC and CODEC Single-channel SLIC and CODEC Single-channel SLIC
Number of Circuits 1 channel 1 channel 1 channel

主要差異化特點

  • Supports wideband and narrowband voice in one single-channel SLIC (對比SI3216-B-FM)
  • Uses a compact 38-QFN 5 mm by 7 mm footprint with an exposed pad (對比SI3216M-C-FM)
  • Provides GCI, PCM, and SPI interfaces in one SLIC (對比SI3216-B-FM)

設計說明

The listed power dissipation is 700 mW, so the exposed pad must be soldered to a continuous ground-plane area and connected with multiple thermal vias where the PCB design permits. Keep the thermal path short by placing the vias near the center of the exposed pad and avoid placing temperature-sensitive components directly beneath the QFN. Validate the final junction temperature using the manufacturer thermal model and the actual copper area, ambient temperature, and airflow in the enclosure.

Use the manufacturer land pattern and pin-description table to define the 38-QFN footprint, exposed pad, and via arrangement. Place supply-decoupling components directly beside the relevant supply and ground pins, and keep their ground returns within the same compact decoupling loop. Confirm pin 1 using the package orientation mark rather than relying only on the land-pattern origin, because an incorrect origin can shift every signal assignment.

Keep PCM, SPI, GCI, and codec clock routes short, with continuous reference planes and no unnecessary stubs. Route sensitive voice and line signals away from switching power nodes and high-current feed paths, and follow the manufacturer's recommended external filter and feed-resistor topology. Clock and digital interface timing should be evaluated with realistic line-card loading because an otherwise correct footprint can still produce degraded signal integrity when traces are poorly terminated.

Do not substitute the device solely because another SI3216 member has a 38-QFN footprint. Verify supply limits, codec mode, digital-interface functions, firmware support, line-feed values, and exposed-pad connections for the exact ordering code. The C and B variants are not necessarily interchangeable in wideband service, and even the M suffix can indicate family-level differences that require design review.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product records identify the part and package but do not provide sufficiently clear compliance statements for a definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals determination.

資料驗證日期: 2026-11-20 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

SI3216-C-FM datasheet SI3216-C-FM pinout SI3216-C-FM datasheet pdf SI3216-C-FM specifications SI3216-C-FM 38-QFN SI3216-C-FM application circuit SI3216-C-FM equivalent SI3216-C-FM replacement SI3216-C-FM vs SI3216M-C-FM SI3216-C-FM price SI3216-C-FM stock Skyworks SI3216-C-FM

相關元件與詞彙

Skyworks Solutions Inc. SI3216-C-FM SI3216M-C-FM SI3216-B-FM Subscriber Line Interface Concept SLIC telecom interface IC interface IC integrated codec voice codec GCI PCM SPI narrowband voice wideband voice 16-bit codec 16 kHz sampling subscriber line central-office equipment subscriber-premises equipment 38-QFN QFN family surface mount SMD exposed pad
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情