SI3225-G-FQ - Dual-Channel SLIC/Codec | Silicon Labs
Артикул: SI3225-G-FQ ✓ АктивенSI3225-G-FQ Обзор
A subscriber line interface circuit, or SLIC, is the analog-side portion of a voice-over-packet or legacy telephone system. It converts between the line signals of a copper subscriber connection and digital voice data. In the IC hierarchy, the SI3225-G-FQ belongs to the interface IC class, combines SLIC and codec functions, and supports telecommunications access equipment such as voice gateways, DSLAMs, and other line-card systems.
The device performs all BORSCHT line functions, including battery, overvoltage, ringing, seizure, codec, hook, and tip-and-ring operations. Its dual-channel architecture consolidates two subscriber lines into one integrated interface. Internal balanced and unbalanced ringing is supported, while the SI3225-specific external bulk-ringer support provides flexibility for ringing-generator arrangements.
Through its GCI, PCM, and SPI interfaces, the SI3225-G-FQ connects a line-card controller to two analog subscriber lines. The 65 mA supply-current specification, 3.3 V and 5 V supply options, and stated 941 mW power figure make the interface suitable for conventional telecom line-card voltage rails. The commercial 0°C to 70°C temperature range targets indoor or temperature-controlled network equipment rather than harsh automotive or outdoor environments.
Typical uses include voice gateways, digital subscriber line access multiplexers, integrated access devices, central-office line cards, and other dual-line voice-processing systems. Two channels per package reduce component count when the board architecture requires multiple subscriber terminations, while software-configurable line functions simplify feature implementation across different ringing and supervision requirements.
Layout should keep analog line connections away from high-speed digital signals, while following the manufacturer’s reference layout for bypass capacitors and grounding. Because the device handles high-voltage and high-current line-side conditions, protection, insulation, and creepage requirements must be evaluated at the board and connector level rather than inferred solely from the IC specifications.
This page brings together the device’s core electrical specifications, functional characteristics, application guidance, and technically comparable family members. It also identifies where package, pin-level, and lifecycle details require confirmation with the manufacturer or the component datasheet before schematic release or production qualification.
Аналоги без доработки для SI3225-G-FQ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с SI3225-G-FQ (тот же форм-фактор и посадочное место) — отличается по Number of Channels, Operating Temperature, Package, Product Type, Ringing Support.
SI3225-FQ
✅ Прямая заменаУточнить цену
Открыть даташит →SI3225-GQ
✅ Прямая заменаУточнить цену
Открыть даташит →SI3225-G-GQR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SI3225-G-FQ Характеристики
| Device Type | Dual-channel SLIC/codec with external ringing support and internal diagnostics |
| Number of Circuits | 2 circuits |
| Напряжение питания | 3.3 V or 5 V |
| Ток потребления | 65 mA |
| Power Consumption | 941 mW |
| Рабочая температура | 0°C to 70°C |
| Интерфейс | GCI, PCM, and SPI |
| Line Functions | All BORSCHT functions |
| Ringing Support | Internal balanced and unbalanced ringing with external bulk-ringer support |
| Diagnostics | Internal diagnostics |
| Application Length | Up to 18 kft |
| Termination Count | 64 terminations |
| Lead-Free Status | Lead-free |
Руководство по цоколевке SI3225-G-FQ в корпусе standard
Цоколевка для SI3225-G-FQ (корпус standard). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для SI3225-G-FQ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
SI3225-G-FQ подходит для 6 применениеs: Voice Gateway Line Cards, DSL Access Multiplexer Line Cards, Integrated Access Equipment, Central Office Line Cards, Industrial Voice Terminals, Digital Private Exchange Equipment.
Voice Gateway Line Cards
The SI3225-G-FQ fits voice gateways that terminate two analog subscriber lines while passing voice traffic to a digital controller. Its two integrated SLIC/codec channels reduce the number of line-interface devices on each card, and GCI, PCM, and SPI provide the control and data paths needed for call supervision. The 3.3 V or 5 V supply flexibility supports both legacy and newer line-card architectures. Designers should allocate routing space for external protection because the IC interfaces directly with subscriber lines while the 941 mW device figure applies only to the IC operating power.
Рекомендуется
DSL Access Multiplexer Line Cards
The SI3225-G-FQ is suitable for DSL access equipment requiring two supervised subscriber terminations per device. It performs all BORSCHT line functions and supports internal balanced and unbalanced ringing, reducing the number of separate line-state circuits on a voice-plus-data line card. The 65 mA supply current and choice of 3.3 V or 5 V operation allow alignment with common access-system rails. Engineers should preserve separation between subscriber-line routing and high-speed data paths and follow the manufacturer reference layout for grounding and bypass components.
Рекомендуется
Integrated Access Equipment
The SI3225-G-FQ can provide analog subscriber-line termination in integrated access equipment that combines voice, data, and system-management functions. Two channels per package make it useful where board area is constrained but each access card must serve multiple analog lines. Its GCI and SPI control paths support configuration and diagnostics, while PCM transfers voice samples to the digital processing section. The 0°C to 70°C commercial rating suits controlled indoor deployments, but designers should select an extended-temperature option when cabinet temperatures exceed that range.
Рекомендуется
Central Office Line Cards
The SI3225-G-FQ is appropriate for central-office line cards requiring two channels of full BORSCHT supervision per package. Internal diagnostics assist system troubleshooting, while external bulk-ringer support allows a line card to share or select ringing resources across channels. The operating temperature of 0°C to 70°C supports controlled central-office environments. Because this is a telecom line-side interface, the board design must also satisfy applicable insulation, surge protection, creepage, and safety requirements for the deployed access voltage and network interface.
Рекомендуется
Industrial Voice Terminals
The SI3225-G-FQ can be used in industrial voice terminals that connect equipment to an analog subscriber line, including monitoring stations and remotely supervised communication endpoints. The dual-channel structure permits a terminal to monitor or service two lines, while internal ringing support simplifies hook-state and ring-signal handling. The 3.3 V and 5 V supply options support embedded control platforms. For installations with temperature variation outside 0°C to 70°C, the SI3225-G-GQR provides a wider -40°C to 85°C operating range and should be evaluated as the preferred family member.
Рекомендуется
Digital Private Exchange Equipment
The SI3225-G-FQ supports dual-channel legacy line termination in private-exchange and branch-office equipment. Its SLIC/codec functions implement the required line supervision and speech conversion, while PCM and serial control interfaces connect the channels to the exchange controller. Packaging two lines into one device can simplify repeated subscriber-card design and reduce routing overhead. Designers should confirm line impedance, loop length, ringing configuration, and software support against the application requirements, because the stated suitability for lines up to 18 kft does not remove the need for network-specific validation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SI3225-G-FQ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | SI3225-FQ | SI3225-GQ | SI3225-G-GQR |
|---|---|---|---|---|
| Package | 64-QFN | 64-QFN | 64-QFN | 64-QFN |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Supply Voltage | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V |
| Supply Current | 65 mA | 65 mA | 65 mA | 65 mA |
| Power Consumption | 941 mW | 941 mW | 941 mW | 941 mW |
| Interface | GCI, PCM, and SPI | GCI, PCM, and SPI | GCI, PCM, and SPI | GCI, PCM, and SPI |
| External Ringing Support | Supported | Supported | Supported | Supported |
| Internal Diagnostics | Supported | Supported | Supported | Supported |
Ключевые отличия
- Two subscriber channels integrated in one package (против SI3225-FQ)
- Commercial-temperature ordering code with lead-free construction (против SI3225-G-GQR)
- External bulk-ringer support retained across the compared family (против SI3225-GQ)
Заметки по проектированию
Separate subscriber-line routing from digital voice, control, and clock paths to limit coupled noise and crosstalk. Follow the manufacturer reference layout for bypass placement, grounding, and exposed-pad connection. Keep line-side protection components close to the connector or line-network entry point, and avoid routing sensitive analog or digital nodes beneath subscriber and ringing conductors.
Design the 3.3 V or 5 V supply path for the stated 65 mA supply current and place local high-frequency bypass capacitors at the device supply pins according to the reference circuit. Verify startup sequencing and rail tolerance across every operating mode. The 941 mW power figure should be treated as an IC operating-power specification rather than a substitute for a complete board thermal calculation.
Do not substitute the SI3225 family solely because the functional description matches. Confirm the complete ordering code, package, temperature grade, lead-free construction, exposed-pad requirements, pin assignments, and supported firmware configuration. In particular, SI3225-G-GQR differs from SI3225-G-FQ by its wider -40°C to 85°C operating range, while the F suffix and G suffix must be checked against the manufacturer ordering table.
Validate line length, loop current, ring voltage, impedance, and external ringing arrangements in the final network application. The family is identified as suitable for applications up to 18 kft, but that statement does not remove regional, carrier, or equipment-specific requirements. Confirm transient protection, insulation, creepage, and clearance at the board and connector interface.
Информация о соответствии
The manufacturer datasheet identifies SI3225-G-FQ as lead-free. RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status require confirmation from current manufacturer product documentation.