SI3225-G-FQ - Dual-Channel SLIC/Codec | Silicon Labs
MPN: SI3225-G-FQ ✓ Hoạt độngSI3225-G-FQ Tóm tắt
A subscriber line interface circuit, or SLIC, is the analog-side portion of a voice-over-packet or legacy telephone system. It converts between the line signals of a copper subscriber connection and digital voice data. In the IC hierarchy, the SI3225-G-FQ belongs to the interface IC class, combines SLIC and codec functions, and supports telecommunications access equipment such as voice gateways, DSLAMs, and other line-card systems.
The device performs all BORSCHT line functions, including battery, overvoltage, ringing, seizure, codec, hook, and tip-and-ring operations. Its dual-channel architecture consolidates two subscriber lines into one integrated interface. Internal balanced and unbalanced ringing is supported, while the SI3225-specific external bulk-ringer support provides flexibility for ringing-generator arrangements.
Through its GCI, PCM, and SPI interfaces, the SI3225-G-FQ connects a line-card controller to two analog subscriber lines. The 65 mA supply-current specification, 3.3 V and 5 V supply options, and stated 941 mW power figure make the interface suitable for conventional telecom line-card voltage rails. The commercial 0°C to 70°C temperature range targets indoor or temperature-controlled network equipment rather than harsh automotive or outdoor environments.
Typical uses include voice gateways, digital subscriber line access multiplexers, integrated access devices, central-office line cards, and other dual-line voice-processing systems. Two channels per package reduce component count when the board architecture requires multiple subscriber terminations, while software-configurable line functions simplify feature implementation across different ringing and supervision requirements.
Layout should keep analog line connections away from high-speed digital signals, while following the manufacturer’s reference layout for bypass capacitors and grounding. Because the device handles high-voltage and high-current line-side conditions, protection, insulation, and creepage requirements must be evaluated at the board and connector level rather than inferred solely from the IC specifications.
This page brings together the device’s core electrical specifications, functional characteristics, application guidance, and technically comparable family members. It also identifies where package, pin-level, and lifecycle details require confirmation with the manufacturer or the component datasheet before schematic release or production qualification.
Bộ thay thế dễ dàng lắp đặt cho SI3225-G-FQ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SI3225-G-FQ (cùng hình factor và footprint) — khác nhau ở Number of Channels, Operating Temperature, Package, Product Type, Ringing Support.
SI3225-FQ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SI3225-GQ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SI3225-G-GQR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SI3225-G-FQ Thông số kỹ thuật
| Device Type | Dual-channel SLIC/codec with external ringing support and internal diagnostics |
| Number of Circuits | 2 circuits |
| Điện áp cung cấp | 3.3 V or 5 V |
| Điện áp cung cấp | 65 mA |
| Power Consumption | 941 mW |
| Nhiệt độ hoạt động | 0°C to 70°C |
| Giao diện | GCI, PCM, and SPI |
| Line Functions | All BORSCHT functions |
| Ringing Support | Internal balanced and unbalanced ringing with external bulk-ringer support |
| Diagnostics | Internal diagnostics |
| Application Length | Up to 18 kft |
| Termination Count | 64 terminations |
| Lead-Free Status | Lead-free |
Hướng dẫn cấu hình chân SI3225-G-FQ standard
Cấu hình chân cho SI3225-G-FQ (standard gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SI3225-G-FQ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SI3225-G-FQ phù hợp cho 6 Áp dụngs: Voice Gateway Line Cards, DSL Access Multiplexer Line Cards, Integrated Access Equipment, Central Office Line Cards, Industrial Voice Terminals, Digital Private Exchange Equipment.
Voice Gateway Line Cards
The SI3225-G-FQ fits voice gateways that terminate two analog subscriber lines while passing voice traffic to a digital controller. Its two integrated SLIC/codec channels reduce the number of line-interface devices on each card, and GCI, PCM, and SPI provide the control and data paths needed for call supervision. The 3.3 V or 5 V supply flexibility supports both legacy and newer line-card architectures. Designers should allocate routing space for external protection because the IC interfaces directly with subscriber lines while the 941 mW device figure applies only to the IC operating power.
Được đề xuất
DSL Access Multiplexer Line Cards
The SI3225-G-FQ is suitable for DSL access equipment requiring two supervised subscriber terminations per device. It performs all BORSCHT line functions and supports internal balanced and unbalanced ringing, reducing the number of separate line-state circuits on a voice-plus-data line card. The 65 mA supply current and choice of 3.3 V or 5 V operation allow alignment with common access-system rails. Engineers should preserve separation between subscriber-line routing and high-speed data paths and follow the manufacturer reference layout for grounding and bypass components.
Được đề xuất
Integrated Access Equipment
The SI3225-G-FQ can provide analog subscriber-line termination in integrated access equipment that combines voice, data, and system-management functions. Two channels per package make it useful where board area is constrained but each access card must serve multiple analog lines. Its GCI and SPI control paths support configuration and diagnostics, while PCM transfers voice samples to the digital processing section. The 0°C to 70°C commercial rating suits controlled indoor deployments, but designers should select an extended-temperature option when cabinet temperatures exceed that range.
Được đề xuất
Central Office Line Cards
The SI3225-G-FQ is appropriate for central-office line cards requiring two channels of full BORSCHT supervision per package. Internal diagnostics assist system troubleshooting, while external bulk-ringer support allows a line card to share or select ringing resources across channels. The operating temperature of 0°C to 70°C supports controlled central-office environments. Because this is a telecom line-side interface, the board design must also satisfy applicable insulation, surge protection, creepage, and safety requirements for the deployed access voltage and network interface.
Được đề xuất
Industrial Voice Terminals
The SI3225-G-FQ can be used in industrial voice terminals that connect equipment to an analog subscriber line, including monitoring stations and remotely supervised communication endpoints. The dual-channel structure permits a terminal to monitor or service two lines, while internal ringing support simplifies hook-state and ring-signal handling. The 3.3 V and 5 V supply options support embedded control platforms. For installations with temperature variation outside 0°C to 70°C, the SI3225-G-GQR provides a wider -40°C to 85°C operating range and should be evaluated as the preferred family member.
Được đề xuất
Digital Private Exchange Equipment
The SI3225-G-FQ supports dual-channel legacy line termination in private-exchange and branch-office equipment. Its SLIC/codec functions implement the required line supervision and speech conversion, while PCM and serial control interfaces connect the channels to the exchange controller. Packaging two lines into one device can simplify repeated subscriber-card design and reduce routing overhead. Designers should confirm line impedance, loop length, ringing configuration, and software support against the application requirements, because the stated suitability for lines up to 18 kft does not remove the need for network-specific validation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SI3225-G-FQ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SI3225-FQ | SI3225-GQ | SI3225-G-GQR |
|---|---|---|---|---|
| Package | 64-QFN | 64-QFN | 64-QFN | 64-QFN |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Supply Voltage | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V |
| Supply Current | 65 mA | 65 mA | 65 mA | 65 mA |
| Power Consumption | 941 mW | 941 mW | 941 mW | 941 mW |
| Interface | GCI, PCM, and SPI | GCI, PCM, and SPI | GCI, PCM, and SPI | GCI, PCM, and SPI |
| External Ringing Support | Supported | Supported | Supported | Supported |
| Internal Diagnostics | Supported | Supported | Supported | Supported |
Bảo phân biệt quan trọng
- Two subscriber channels integrated in one package (vsSI3225-FQ)
- Commercial-temperature ordering code with lead-free construction (vsSI3225-G-GQR)
- External bulk-ringer support retained across the compared family (vsSI3225-GQ)
Ghi chú thiết kế
Separate subscriber-line routing from digital voice, control, and clock paths to limit coupled noise and crosstalk. Follow the manufacturer reference layout for bypass placement, grounding, and exposed-pad connection. Keep line-side protection components close to the connector or line-network entry point, and avoid routing sensitive analog or digital nodes beneath subscriber and ringing conductors.
Design the 3.3 V or 5 V supply path for the stated 65 mA supply current and place local high-frequency bypass capacitors at the device supply pins according to the reference circuit. Verify startup sequencing and rail tolerance across every operating mode. The 941 mW power figure should be treated as an IC operating-power specification rather than a substitute for a complete board thermal calculation.
Do not substitute the SI3225 family solely because the functional description matches. Confirm the complete ordering code, package, temperature grade, lead-free construction, exposed-pad requirements, pin assignments, and supported firmware configuration. In particular, SI3225-G-GQR differs from SI3225-G-FQ by its wider -40°C to 85°C operating range, while the F suffix and G suffix must be checked against the manufacturer ordering table.
Validate line length, loop current, ring voltage, impedance, and external ringing arrangements in the final network application. The family is identified as suitable for applications up to 18 kft, but that statement does not remove regional, carrier, or equipment-specific requirements. Confirm transient protection, insulation, creepage, and clearance at the board and connector interface.
Thông tin tuân thủ
The manufacturer datasheet identifies SI3225-G-FQ as lead-free. RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status require confirmation from current manufacturer product documentation.