Silicon Labs

SI3227-E-FQ - Dual-Channel 3.3V SLIC | Silicon Labs

Артикул: SI3227-E-FQ ✗ Снят с производства
3.3 V Vdss 45 mA Id 64-pin TQFP Package
MOQ: 1 |

SI3227-E-FQ Обзор

The Silicon Labs SI3227-E-FQ is a dual-channel subscriber line interface circuit, or SLIC, designed for 3.3 V voice-line systems and packaged in a 64-pin TQFP. It provides two interface channels, 60 dB dynamic gain performance, and approximately 45 mA supply current. The device supports GCI, PCM, and SPI interfaces, providing a flexible interface between a digital voice system and analog telephone lines.

A SLIC is an integrated analog-front-end circuit used within subscriber-line access equipment, voice gateways, central-office terminals, and digital telephone systems. In the hierarchy of semiconductor functions, a SLIC belongs to the interface IC class and connects digital switching or codec circuitry to the physical telephone network. It integrates line-driver, receiver, ringing, impedance, and supervision functions that otherwise require many discrete analog components.

The SI3227-E-FQ performs the BORSCHT line functions and supports internal balanced or unbalanced ringing. Its two-channel architecture reduces component count and board area in designs requiring multiple subscriber lines. Software-programmable parameters provide a practical way to configure gain, impedance, and line behavior for different loop lengths and network conditions. The 3.3 V supply operation also aligns the device with modern low-power digital voice architectures.

According to the Silicon Labs datasheet, the device exposes GCI, PCM, and SPI interface choices and operates from a 3.3 V supply. The listed 60 dB figure identifies the channel performance class, while the approximately 45 mA figure provides a baseline for power budgeting. Because the SI3227-E-FQ also includes dual DC-DC controller capability in this family, it can support line-side power architectures, although the exact external power configuration must follow the manufacturer application guidance.

Typical applications include voice-over-IP line-card interfaces, digital subscriber line access equipment, central-office line cards, voice gateways, and short- or long-loop analog telephone interfaces. The two integrated channels are particularly useful when the host processor requires several subscriber-line functions but board space is constrained.

For a new layout, place the SI3227-E-FQ close to the protected line interface and keep high-voltage telephone-network paths separate from low-level digital signals. Validate surge protection, transformer or external filtering, line impedance, and ringing behavior against the applicable country-specific network requirements before production release.

This product page combines the confirmed interface and electrical characteristics, package information, sourcing guidance, and practical replacement assessment for engineers designing or maintaining dual-channel voice-line interface equipment.

Аналоги без доработки для SI3227-E-FQ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

SI3227-E-FQ Характеристики

Product Type Dual-channel subscriber line interface circuit (SLIC)
Number of Channels 2 channels
Напряжение питания 3.3 V
Ток потребления 45 mA
Dynamic Gain 60 dB
Digital Interfaces GCI, PCM, and SPI
Line Functions BORSCHT functions
Ringing Configuration Internal balanced or unbalanced ringing
Programmability Software-programmable parameters
DC-DC Controllers 2 controllers
Корпус 64-pin TQFP
Тип монтажа Surface mount
Lead-Free Status Lead-free

Руководство по цоколевке SI3227-E-FQ в корпусе 64-pin tqfp

Цоколевка для SI3227-E-FQ (корпус 64-pin tqfp). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 64-pin tqfp для SI3227-E-FQ

Нет подробных данных о распиновке для SI3227-E-FQ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

SI3227-E-FQ подходит для 6 применениеs: Digital Subscriber-Line Access Equipment, Voice-over-IP Line Cards, Central-Office Line Cards, Short-Loop Voice Gateways, Long-Loop Subscriber Terminals, Legacy Voice-System Maintenance.

🌐

Digital Subscriber-Line Access Equipment

The SI3227-E-FQ is suitable for access equipment that connects digital switching resources to analog subscriber lines because it integrates two SLIC channels, BORSCHT functions, and internal balanced or unbalanced ringing in one 64-pin TQFP device. Its documented GCI, PCM, and SPI interfaces let the system processor connect through an appropriate digital voice protocol rather than relying on a separate host interface. The approximately 45 mA operating current also provides a defined starting point for 3.3 V supply design. In a line card, the device can sit beside isolation transformers, surge protection, and the dual DC-DC power stage, reducing component count while preserving independent control of two subscriber lines.

📞

Voice-over-IP Line Cards

The SI3227-E-FQ fits voice-over-IP line cards that require two analog telephone-network interfaces alongside a digital voice processor. GCI, PCM, or SPI connectivity allows a system architect to select the interface supported by the selected codec or channel controller, while the dual-channel arrangement limits board area. Its 60 dB listed channel performance and software-programmable parameters support voice-path tuning across different loop conditions. The dual DC-DC controllers are useful when the line card must generate a controlled line-side feed, although external magnetics, protection components, and the correct telephone-network impedance remain essential parts of the final design.

🏢

Central-Office Line Cards

The SI3227-E-FQ is appropriate for compact central-office terminal equipment requiring two subscriber-line channels per device. Integrating ringing, line supervision, and BORSCHT-related functions into the SLIC reduces the number of separate analog interface assemblies. The 3.3 V IC supply is compatible with low-power digital switching hardware, and the listed 45 mA operating current allows a preliminary 3.3 V rail budget to be prepared. Designers should still account for external line-power conversion efficiency and telephone-network transients. Software-programmable parameters allow channel behavior to be adjusted during production, but final impedance, gain, and ringing settings must be validated with the target network profile.

🔊

Short-Loop Voice Gateways

For short-loop voice gateways, the SI3227-E-FQ provides a compact two-channel interface between the gateway's digital processor and local analog lines. The manufacturer identifies the device for short- or long-loop applications and supports software-programmable parameters, allowing engineers to configure the two channels for the intended loop characteristics. Its GCI, PCM, and SPI interface options provide flexibility when the gateway platform already uses a particular voice controller. Because the IC handles line-interface functions, the board still needs isolation, surge protection, ringing components, and a compliant line-power stage. The TQFP package also requires careful exposed-pad layout and thermal-via implementation.

📡

Long-Loop Subscriber Terminals

The SI3227-E-FQ is identified by Silicon Labs for long-loop applications as well as short-loop operation, making it suitable for terminal equipment that must support a broader range of subscriber distances. Software-programmable parameters are important because line gain, impedance, and ringing behavior can vary with loop length and network configuration. Two channels in one 64-pin TQFP reduce connector and PCB-space requirements compared with separate single-channel implementations. The approximately 45 mA IC current remains separate from total line power, so designers must evaluate the dual DC-DC controller section and its magnetics against the required off-hook load. Conduct acoustic, return-loss, and network compliance testing before deployment.

🔧

Legacy Voice-System Maintenance

The SI3227-E-FQ is particularly relevant to maintenance programs for installed voice systems that already use its 64-pin TQFP footprint and 3.3 V interface architecture. Replacing a failed device with the exact order code avoids an unverified footprint and software-support change. The target is also suitable for boards requiring two channels and selectable digital connectivity, while its programmed line behavior can be restored from the original equipment configuration. Before replacing the component, inspect the board for damaged magnetics or protection parts, confirm the existing DC-DC power arrangement, and compare the replacement’s operating temperature and marking requirements with the original production specification.

What is the operating voltage of the SI3227-E-FQ?
The SI3227-E-FQ operates from a 3.3 V supply. According to the Silicon Labs manufacturer datasheet, the device is a dual-channel subscriber line interface circuit with GCI, PCM, and SPI digital interfaces. This supply voltage supports integration with modern 3.3 V voice-processing systems, although the complete telephone-line power architecture still requires suitable line-side DC-DC circuitry and protection.
How many channels and package pins does the SI3227-E-FQ have?
The SI3227-E-FQ provides two SLIC channels in a 64-pin TQFP package. Its manufacturer datasheet identifies the device as a dual-channel wideband SLIC/CODEC with dual DC-DC controllers. The 64-pin surface-mount package consolidates two line interfaces, digital connectivity, ringing, and line-power control into one component, reducing board area compared with separate single-channel implementations.
Where can I download the SI3227-E-FQ datasheet PDF?
The SI3227-E-FQ manufacturer datasheet is available from the official Silicon Labs documentation link listed with this product. It is the primary source for the pin description, electrical characteristics, line-interface configuration, DC-DC controller diagrams, and application circuits. Use the pin-description table when assigning PCB signals and verify the device revision against the markings or packing information on your hardware.
Where can I find the SI3227-E-FQ pinout?
The SI3227-E-FQ pinout is documented in the pin-description table of the Silicon Labs manufacturer datasheet. The device uses a 64-pin TQFP outline, but pin names and functions must be assigned from the datasheet rather than inferred from the package alone. Pay particular attention to analog line connections, digital interface signals, supply pins, ground returns, and DC-DC controller connections.
What is the SI3227-E-FQ used for in telephone equipment?
The SI3227-E-FQ is used to connect digital voice-processing circuitry to two analog subscriber telephone lines. According to the manufacturer datasheet, it performs the BORSCHT line functions and supports internal balanced or unbalanced ringing. Typical equipment includes line cards, voice gateways, subscriber-line access systems, and other carrier equipment requiring integrated two-channel line interfaces.
What are the key specifications engineers should know about the SI3227-E-FQ?
The SI3227-E-FQ is a dual-channel, 3.3 V SLIC in a 64-pin TQFP package. The Silicon Labs datasheet identifies GCI, PCM, and SPI interfaces, 60 dB channel performance, approximately 45 mA supply current, software-programmable parameters, BORSCHT functions, and internal balanced or unbalanced ringing. These characteristics make it suited to two-line voice interfaces requiring compact integration and flexible digital connectivity.
What can replace the SI3227-E-FQ?
The SI3227-E-FQR is the closest identified ordering alternative because it represents the lead-free version of the same SI3227 family device. Its order code differs in the final reel or tape-and-reel suffix, so engineers should verify the physical packing method before substitution. No other pin-compatible, same-package replacements could be confirmed from the available cross-reference results, so a new design should not assume broader interchangeability.
Is the SI3227-E-FQ the same as the SI3227-E-FQR?
The SI3227-E-FQR is an ordering variant of the same dual-channel, lead-free SLIC family and retains the 3.3 V, 60 dB, 45 mA, and 64-pin TQFP characteristics associated with the target device. The principal difference is the final order-code suffix associated with packing or reel configuration. Confirm the required packing form, exposed-pad treatment, and production marking before treating the two MPNs as interchangeable.
When should I choose the SI3227-E-FQ over another dual-channel SLIC?
Choose the SI3227-E-FQ when a legacy voice-line design specifically requires its documented combination of two channels, 3.3 V operation, GCI/PCM/SPI connectivity, BORSCHT functions, and 64-pin TQFP implementation. For a new design, compare these requirements against currently supported interface controllers and confirm lifecycle availability, line impedance, ringing, protection, and power-supply requirements before committing the footprint.
Is the SI3227-E-FQ suitable for short-loop and long-loop voice lines?
Yes, the Silicon Labs manufacturer datasheet identifies the SI3227-E-FQ as suitable for short- or long-loop applications and supports software-programmable line parameters. Actual deployment still requires correct external line-network components and configuration for the target loop length, impedance, and ringing plan. Validate the selected impedance profile against the intended telephone network and country-specific requirements before deployment.
How much current does the SI3227-E-FQ consume?
The listed supply current for the SI3227-E-FQ is approximately 45 mA. The Silicon Labs manufacturer datasheet also identifies dual DC-DC controllers, allowing line-side power conversion to be integrated with the two-channel interface. Because 45 mA describes the IC supply condition rather than total board input power, the complete power budget must additionally include external line-power conversion and associated losses.
What power and thermal considerations apply to the SI3227-E-FQ?
Begin the thermal review with the listed 45 mA operating current and the selected 3.3 V IC supply. The estimated IC dissipation is calculated as 3.3 V multiplied by 45 mA, or about 0.149 W, before accounting for external DC-DC conversion losses and line-power loading. Confirm copper area, exposed-pad soldering, ambient temperature, and the maximum junction-temperature limit against the manufacturer datasheet.
Is the SI3227-E-FQ RoHS compliant and lead-free?
The SI3227-E-FQ family is identified as lead-free by distributor product documentation. RoHS status is not explicitly established in the available product records, so it should remain classified as unknown rather than inferred. Request the current environmental-material declaration from the supplier when a formal RoHS or REACH compliance statement is required for procurement or product-release documentation.
Where can I buy the SI3227-E-FQ and what is its price?
Use the Request a Quote form on this page to request SI3227-E-FQ availability, pricing, and lead time for the exact order code and required packing method. The device is an older interface IC, so stock and minimum-order conditions may vary by package format. Provide the target quantity, reel or tube preference, and any required traceability documentation when submitting the request.
What is the best Silicon Labs equivalent for the SI3227-E-FQ?
The SI3227-E-FQR is the best-supported Silicon Labs ordering equivalent identified for the SI3227-E-FQ because it is described as the lead-free, tape-and-reel form of the same dual-channel wideband SLIC/CODEC family. It preserves the stated 3.3 V supply, approximately 45 mA current, 60 dB performance, dual DC-DC controllers, and 64-pin TQFP configuration. Confirm reel orientation, markings, and production conditions before substitution.

Справочные инженерные данные для SI3227-E-FQ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the SI3227-E-FQ when maintaining a legacy two-channel voice interface that specifically depends on its documented 3.3 V operation, GCI, PCM, or SPI connectivity, BORSCHT functions, software-programmable parameters, and 64-pin TQFP footprint. It is particularly useful when the existing platform already supports the device’s line-power architecture, ringing method, and register behavior. The SI3227-E-FQR is the closest identified ordering form because it retains the same family characteristics and lead-free construction, but its packing suffix must be matched to the board’s assembly method. No other pin-compatible replacements were confirmed from the available cross-reference records. For a completely new design, evaluate currently supported dual-channel interface controllers first, because the SI3227-E-FQ is an older platform component and may impose obsolete external components, software dependencies, or temperature constraints.

Сравнение с аналогами

Параметр Этот товар
Brand Silicon Labs
Package 64-pin TQFP
Number of Channels 2 channels
Supply Voltage 3.3 V
Supply Current 45 mA
Dynamic Gain 60 dB
Digital Interfaces GCI, PCM, and SPI
DC-DC Controllers 2 controllers
Line Functions BORSCHT functions
Ringing Internal balanced or unbalanced ringing
Programmability Software-programmable parameters
Lead-Free Status Lead-free

Ключевые отличия

  • Two subscriber-line channels in one package (против SI3227-E-FQR)
  • Multiple digital host-interface choices (против SI3227-E-FQR)
  • Integrated line-side power management (против SI3227-E-FQR)

Заметки по проектированию

Estimated: using the documented 3.3 V IC supply and 45 mA operating current, IC dissipation is approximately 0.149 W before external line-power conversion losses. Use this value for an initial thermal budget, not as a complete board-power figure. Size the 3.3 V regulator for the IC, digital controller loads, and external converter input current, while verifying the dual DC-DC controller topology and magnetics against the manufacturer application circuit.

Use the manufacturer datasheet pin-description table to assign all 64 TQFP signals and preserve the specified exposed-pad connection. Keep sensitive analog line-side nodes compact and isolate them from SPI, GCI, and PCM routing. Follow the manufacturer’s recommended component placement and decoupling arrangement, provide a continuous ground path under the device, and confirm exposed-pad soldering requirements during manufacturing inspection.

Telephone-line nodes can carry high transient energy even when the SI3227-E-FQ itself operates from 3.3 V. Place the protection network and isolation components so surge current returns through controlled paths rather than through digital ground areas. Maintain separation between line-side power converters, magnetics, analog connections, and digital interfaces. Review creepage, clearance, ringing-node geometry, and protective-component placement against the applicable telephone-network safety requirements.

Do not treat the two DC-DC controller functions as proof that the complete line-power supply is included in the IC. External magnetics, rectifiers or switching components, filtering, and protection remain necessary according to the reference design. Also do not infer replacement compatibility from the 64-pin TQFP outline alone; verify the exact order code, digital interface mode, register behavior, exposed pad, packing method, operating temperature, and legacy system software support.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Yes
Без галогенов
Unknown
Конфликтные минералы
Unknown

Distributor product documentation identifies the SI3227 family as lead-free. Explicit RoHS, REACH, halogen-free, and conflict-minerals declarations were not available.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

SI3227-E-FQ datasheet SI3227-E-FQ datasheet pdf SI3227-E-FQ pinout SI3227-E-FQ specifications SI3227-E-FQ equivalent SI3227-E-FQ replacement SI3227-E-FQ cross reference SI3227-E-FQ price SI3227-E-FQ stock Silicon Labs SI3227-E-FQ SI3227-E-FQ TQFP-64 pinout SI3227-E-FQ dual channel SLIC SI3227-E-FQ voice line interface SI3227-E-FQ vs SI3227-E-FQR

Связанные компоненты & термины

Silicon Labs SI3227-E-FQ SI3227-E-FQR dual-channel SLIC subscriber line interface circuit interface IC telephone line interface voice codec GCI PCM SPI BORSCHT functions software-programmable parameters DC-DC controller 3.3 V power supply 60 dB channel performance 45 mA supply current 64-pin TQFP TQFP package family surface-mount semiconductor short-loop application long-loop application balanced ringing unbalanced ringing RoHS REACH lead-free
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ