Silicon Labs

SI3227-E-GQ - Dual-Channel SLIC/CODEC, 3.3V, 64-TQFP

Артикул: SI3227-E-GQ ✓ Активен
3.3 V Vdss 45 mA Id 64-pin TQFP Package
MOQ: 1 |

SI3227-E-GQ Обзор

The Silicon Labs SI3227-E-GQ is a dual-channel wideband SLIC/CODEC for telecom line-interface designs, integrating two line-driver circuits, GCI, PCM, and SPI interfaces, dual DC-DC controllers, and 64 line terminations in a 64-pin TQFP package. It operates from a 3.3 V supply and is specified for 45 mA operation with a 60 dB gain-related parameter, making it suitable for voice-over-IP terminals, embedded gateways, and digital subscriber line equipment.

A SLIC, or Subscriber Line Interface Circuit, is the analog-facing section of a telephone line interface. It converts between a line-referenced analog voice signal and a digital PCM stream, while a companion CODEC handles signal conversion and voice processing. In the broader semiconductor hierarchy, the SI3227-E-GQ belongs to the interface IC family and then to the telecommunications interface category, combining analog line access, digital logic, and power-conversion control in one device.

Key features include two line circuits, 64 terminations, a 3.3 V operating supply, and support for GCI, PCM, and SPI interfaces. The integrated dual DC-DC controllers reduce the number of separate power-management components required in a line-card design. Its 64-pin TQFP package provides enough pin count for two complete channels and their associated control, interface, biasing, and supply connections, while supporting standard surface-mount assembly methods.

The device is intended for telecom access equipment where a compact two-channel solution offers a better channel-density tradeoff than discrete SLIC and codec arrangements. Split supply rails created by the internal DC-DC controllers can help separate sensitive analog and digital functions, although component selection and layout remain the responsibility of the system designer. The SI3227-E-GQ also supports lead-free assembly according to its distributor listing.

Typical uses include Voice-over-IP endpoint hardware, analog terminal adapters, digital line-card equipment, embedded telephony controllers, and industrial voice gateways. Two integrated channels allow one package to serve both sides of a two-line terminal or a single line pair on a multi-port access board, reducing board area when compared with two separate single-channel devices.

The primary design trade-off is channel integration versus flexibility. Combining two SLIC channels, codec functions, digital interfaces, and DC-DC control simplifies the bill of materials, but the layout must carefully separate line-referenced analog routing from high-speed digital signals and sensitive supply nodes. Confirm absolute maximum ratings, line-state impedance requirements, and interface timing against the manufacturer datasheet before releasing a production layout.

This page organizes the device specifications, pin-compatible family options, application guidance, and design considerations into one engineering reference. It also identifies the electrical and mechanical details that should be checked during PCB bring-up and production qualification.

Аналоги без доработки для SI3227-E-GQ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

SI3227-E-FQ

✅ Прямая замена ⚠️ Характеристики не проверены
Silicon Labs
📦 64-pin TQFP
Dual-channel subscriber line interface circuit (SLIC) · 2 channels · 3.3 V · 45 mA · 60 dB · GCI, PCM, and SPI · BORSCHT functions · Internal balanced or unbalanced ringing

Уточнить цену

Открыть даташит →

SI3227-E-FQR

✅ Прямая замена
📦 64-pin TQFP
F revision with reel packaging versus the GQ tray code; same dual-channel architecture, 3.3 V supply, and 64-pin footprint

📋 Справочный аналог (нет в каталоге)

SI3227-GQ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 64-pin TQFP
Earlier family revision with the same 64-pin TQFP format and dual-channel telecom interface role; revision changes must be reviewed

📋 Справочный аналог (нет в каталоге)

SI3227-E-GQR

✅ Прямая замена
📦 64-pin TQFP
Reel-packaged order code of the same E revision; electrical ratings match but reel orientation and handling differ

📋 Справочный аналог (нет в каталоге)

SI3227-GQR

✅ Прямая замена ⚠️ Характеристики не проверены
📦 64-pin TQFP
Reel-packaged earlier revision with the same 64-pin TQFP footprint; revision-specific characteristics require verification

📋 Справочный аналог (нет в каталоге)

SI3227-E-GQ Характеристики

Product Type Dual-channel wideband SLIC/CODEC
Number of Channels 2 circuits
Line Terminations 64 terminations
Напряжение питания 3.3 V
Current 45 mA
Gain 60 dB
Digital Interface GCI, PCM, SPI
Integrated Power Control Dual DC-DC controllers
Корпус 64-pin TQFP
Тип монтажа Surface Mount
Termination Style Lead-free
Line Interface Type Telecom Interface
Codec Functions Dual-channel SLIC/CODEC

Руководство по цоколевке SI3227-E-GQ в корпусе 64-pin tqfp

Цоколевка для SI3227-E-GQ (корпус 64-pin tqfp). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 64-pin tqfp для SI3227-E-GQ

Нет подробных данных о распиновке для SI3227-E-GQ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

SI3227-E-GQ подходит для 6 применениеs: Voice-over-IP Terminal Interface, Analog Terminal Adapter, Multi-Port Voice Gateway, Embedded Telephony Controller, Digital Line Card Equipment, Industrial Voice Communication Terminal.

📱

Voice-over-IP Terminal Interface

The SI3227-E-GQ fits a two-line Voice-over-IP terminal because it combines two SLIC/CODEC channels with GCI, PCM, and SPI connectivity in one 64-pin TQFP device. Its 3.3 V operation aligns with many embedded host platforms, while the dual DC-DC controllers help organize the analog and digital supply domains. The integrated topology can reduce the number of separate interface components compared with a discrete SLIC, codec, and converter arrangement. Designers should still allocate separate board areas for line-referenced analog routing and digital control signals.

☎️

Analog Terminal Adapter

The SI3227-E-GQ is appropriate for an analog terminal adapter that must terminate two telephone lines while connecting to a digital controller. Two integrated circuits reduce the component count and board area needed for dual-channel access, and the 64 terminations support dense line-interface layouts. GCI and PCM provide established data paths for voice transport and control, while SPI can simplify device configuration. The PCB must preserve the separation between external line networks and low-level digital circuitry.

🌐

Multi-Port Voice Gateway

A multi-port voice gateway can use the SI3227-E-GQ when each board must handle two line channels without allocating separate single-channel packages. Its 3.3 V supply, 45 mA listed current, and integrated dual DC-DC controllers support compact channel-dense designs. The 64-pin TQFP package allows several devices to be placed on a line card while leaving controlled routing channels between them. For each channel, the designer must provide suitable external protection, matching, and line-access networks according to the target application.

🔧

Embedded Telephony Controller

The SI3227-E-GQ can serve as the analog line front end of an embedded telephony controller that exchanges PCM voice data with a digital processor. Its dedicated GCI, PCM, and SPI interfaces support both traffic and configuration paths, while the dual-channel architecture reduces the number of line-driver blocks needed on the board. The 3.3 V operating supply simplifies integration with modern embedded logic. Firmware and hardware teams should confirm channel timing, framing, and control signaling against the manufacturer interface documentation.

🖥️

Digital Line Card Equipment

The SI3227-E-GQ is suited to digital line-card equipment requiring two subscriber-line interfaces and a compact mixed-signal package. Its 64 terminations and dual DC-DC controllers are valuable where line density and component count are both important. GCI can support a multichannel interface arrangement while PCM carries individual voice channels to the system controller. Layout quality remains critical because high-speed digital activity and line-referenced analog nodes share the same package and require disciplined return-path planning.

🏭

Industrial Voice Communication Terminal

Industrial voice terminals that connect legacy analog equipment to an Ethernet or embedded control network can use the SI3227-E-GQ for the line-facing section. The dual-channel arrangement supports two analog endpoints in one package, and the 45 mA listed operating current suits compact embedded systems. Its 3.3 V supply and SPI control path simplify connection to a host controller. Use external surge protection and isolation strategies appropriate to the line exposure, and confirm operating-temperature requirements for the deployment environment.

What is the Silicon Labs SI3227-E-GQ?
The SI3227-E-GQ is a dual-channel wideband SLIC/CODEC integrated circuit for telecom line-interface equipment. It combines two line circuits, GCI, PCM, and SPI interfaces, dual DC-DC controllers, and 64 terminations in a 64-pin TQFP package. Its 3.3 V supply operation makes it suitable for voice terminals, Voice-over-IP equipment, and embedded telephony systems.
What are the key specifications of SI3227-E-GQ?
The main SI3227-E-GQ specifications are two integrated line circuits, 64 line terminations, a 3.3 V supply, 45 mA current, 60 dB gain, and GCI, PCM, and SPI interfaces. The device also includes dual DC-DC controllers and is offered in a 64-pin TQFP package. These parameters place it in the dual-channel telecom interface IC category for two-line voice applications.
Where can I download the SI3227-E-GQ datasheet PDF?
The SI3227-E-GQ datasheet PDF is available from the manufacturer-linked document hosted by Ariat-Tech at the datasheet URL on this page. Use the manufacturer datasheet as the controlling document for the complete 64-pin connection list, absolute maximum ratings, DC-DC component recommendations, interface timing, and line-state electrical limits before designing the PCB.
Where is the pinout for the 64-pin SI3227-E-GQ?
The SI3227-E-GQ uses a 64-pin TQFP package, but the complete numbered pin table is not printed on the distributor result pages. Consult the connection diagram and pin-description tables in the manufacturer datasheet before assigning PCB tracks or designing the line interface. The package drawing should be checked against the PCB footprint library for correct lead pitch and exposed-pad requirements.
Can SI3227-E-FQR replace the SI3227-E-GQ?
The SI3227-E-FQR is a closely related member of the SI3227 family with the same dual-channel wideband SLIC/CODEC function, 64-pin TQFP format, 3.3 V operation, GCI, PCM, and SPI interfaces, and dual DC-DC controllers. Its E-to-F revision status and order-code handling must still be confirmed in the manufacturer documentation before treating it as a drop-in production substitute.
What is the difference between SI3227-E-GQ and SI3227-E-GQR?
The SI3227-E-GQ and SI3227-E-GQR share the same SI3227-E family and 64-pin TQFP electrical architecture, with the primary ordering distinction being the reel-packaging code. Their line-circuit count, 3.3 V supply, digital interfaces, and DC-DC controller configuration remain the same. Verify reel orientation, pin-one location, and whether your assembly process requires the tray or reel order code.
What is the best drop-in replacement for SI3227-E-GQ?
The closest documented family alternative is the SI3227-E-FQR, which retains the dual-channel SLIC/CODEC configuration, 3.3 V supply, GCI, PCM, and SPI interfaces, dual DC-DC controllers, and 64-pin TQFP format. Because the F and E order codes represent different family revisions, review device revision notes and timing or electrical-characteristic changes in the manufacturer datasheet before substitution.
When should I choose SI3227-E-GQ over another SLIC/CODEC?
Choose the SI3227-E-GQ when a telecom design needs two integrated line channels, a 3.3 V system rail, GCI, PCM, and SPI connectivity, and local DC-DC control in a single 64-pin TQFP device. A separate codec or additional single-channel SLIC may be preferable when channels must be routed to independent controllers, when regulatory isolation is required, or when the line interface needs a different architecture.
Is SI3227-E-GQ suitable for a Voice-over-IP terminal?
Yes, the SI3227-E-GQ is well suited to Voice-over-IP terminal hardware that requires two analog line channels and a compact digital interface to a host processor. The dual-channel SLIC/CODEC, GCI, PCM, and SPI support, and integrated DC-DC controllers simplify the analog termination section, while the 3.3 V operation aligns with many embedded telephony platforms.
How much current does the SI3227-E-GQ use?
The listed operating current for the SI3227-E-GQ is 45 mA. The distributor specification describes this as the device current rating under the stated operating conditions, but a complete power budget must also include line-driver dissipation, codec activity, external DC-DC converter efficiency, and load-dependent line current. Use the manufacturer datasheet for test conditions and absolute maximum supply limits.
What interfaces does the SI3227-E-GQ support?
The SI3227-E-GQ supports GCI, PCM, and SPI interfaces according to its published specifications. GCI and PCM provide standard paths for exchanging voice and control data with a line-card or terminal controller, while SPI supports configuration access and control. Signal rates, framing formats, and timing margins should be taken from the manufacturer interface specifications.
What can replace the SI3227-E-GQ in a two-line design?
A related SI3227 family device such as the SI3227-E-FQR can be evaluated as a replacement because it preserves the dual-channel SLIC/CODEC function, 64-pin TQFP format, 3.3 V supply, digital interfaces, and dual DC-DC controllers. Treat this as a controlled substitution: verify revision changes, absolute maximum ratings, timing, line-impedance behavior, and package orientation in the manufacturer datasheet.
Is the SI3227-E-GQ the same as a discrete SLIC and codec design?
No. The SI3227-E-GQ integrates functions that a discrete implementation would normally divide among a SLIC, a voice codec, interface logic, and separate power converters. This integration can reduce board area and component count, but it also constrains the design to the internal architecture and performance of the device. External matching networks, protection, and line-access components remain necessary.
Where can I buy the SI3227-E-GQ online?
The SI3227-E-GQ can be requested through the Request a Quote form on this page, where the current availability, lead time, and order quantity can be confirmed for your specific bill of materials. The quote team can also clarify the correct tape-and-reel or tray order code and whether any authorized channel inventory is available at the time of request.
What is the lead time for the SI3227-E-GQ?
The current lead time for the SI3227-E-GQ should be confirmed through the Request a Quote form on this page before it is placed into a production schedule. Lead time can vary with order quantity, packaging choice, and channel inventory. For new designs, request a schedule that covers both the initial prototype build and the planned production ramp.
How should the SI3227-E-GQ PCB layout be designed?
The SI3227-E-GQ layout should keep line-referenced analog routing, digital interface signals, and supply distribution physically separated, while placing external termination and decoupling components close to their associated pins. Route the GCI, PCM, and SPI signals away from sensitive line-node circuitry, and use the manufacturer application guidance for DC-DC magnetics, feedback components, and ground-plane construction.

Справочные инженерные данные для SI3227-E-GQ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the SI3227-E-GQ for a two-line telecom interface requiring a 3.3 V dual-channel SLIC/CODEC with GCI, PCM, SPI, and integrated dual DC-DC controllers in a 64-pin TQFP. It is especially useful when board area and external component count matter more than having independent controllers for each channel. Select the SI3227-E-GQR when the same electrical configuration is required in a reel-packaged production format. Evaluate the SI3227-E-FQ or SI3227-E-FQR only after checking revision-dependent electrical characteristics, timing, and component requirements against the manufacturer documentation. An earlier SI3227-GQ or SI3227-GQR may assist legacy-product maintenance, but it requires careful review of revision differences. For new designs needing more than two channels, isolated interfaces, or a separate codec architecture, consider a different channel-density solution rather than forcing a direct substitution.

Сравнение с аналогами

Параметр Этот товар SI3227-E-FQ SI3227-E-FQR SI3227-GQ SI3227-E-GQR SI3227-GQR
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-pin TQFP 64-pin TQFP 64-pin TQFP 64-pin TQFP 64-pin TQFP 64-pin TQFP

Ключевые отличия

  • Two complete line channels in one package (против SI3227-E-FQR)
  • Single-device integration of line access and digital control (против SI3227-GQ)
  • 3.3 V integration for embedded telecom systems (против SI3227-E-GQR)

Заметки по проектированию

Separate line-referenced analog traces from GCI, PCM, and SPI routing before they approach the device. Keep external termination, protection, and matching components close to their associated pins, and avoid routing digital clock or control signals beneath line-network nodes. Provide continuous return paths and use the manufacturer's recommended ground-plane arrangement to minimize coupling between the two integrated channels.

Estimated: for a 3.3 V rail at the listed 45 mA operating current, the device-side input power is approximately 0.15 W before external converter and line-driver losses are included. Actual dissipated power depends on activity, channel state, and the external DC-DC implementation, so use the manufacturer thermal data and measured channel loading for the final enclosure and copper-area assessment.

Do not treat the GQ, GQR, FQ, and FQR order codes as electrically interchangeable without checking the family revision. The GQ and GQR distinction includes reel handling, while the E and F codes may carry revision-level differences. Confirm interface timing, absolute maximum ratings, line-impedance behavior, package orientation, and component recommendations in the manufacturer datasheet before releasing a substitution.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Yes
Без галогенов
Unknown
Конфликтные минералы
Unknown

The distributor listing identifies SI3227-E-FQR as lead-free. RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation in the manufacturer compliance documentation or current material declaration. AEC-Q100 status is not applicable to a telecom interface IC unless the manufacturer offers an automotive-qualified variant.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

SI3227-E-GQ datasheet SI3227-E-GQ datasheet pdf SI3227-E-GQ pinout Silicon Labs SI3227-E-GQ SI3227-E-GQ 64 pin TQFP SI3227-E-GQ dual channel SLIC SI3227-E-GQ 3.3V SI3227-E-GQ GCI PCM SPI SI3227-E-GQ equivalent SI3227-E-GQ replacement SI3227-E-GQ vs SI3227-E-FQR SI3227-E-GQ price SI3227-E-GQ stock SI3227-E-GQ application circuit SI3227-E-GQ Voice over IP terminal

Связанные компоненты & термины

Silicon Labs SI3227-E-GQ SI3227-E-FQ SI3227-E-FQR SI3227-GQ SI3227-E-GQR SI3227-GQR SLIC subscriber line interface circuit CODEC telecom interface IC dual-channel wideband SLIC/CODEC GCI PCM SPI DC-DC controller line termination 3.3 V power supply 64-pin TQFP TQFP package family surface-mount package Voice-over-IP terminal digital line card embedded telephony Silicon Labs
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ