Texas Instruments

SN74HC125N - 4-Channel 3-State Buffer | Texas Instruments

Артикул: SN74HC125N ✓ Активен
2 V to 6 V Vdss 14-PDIP, through-hole Package
MOQ: 1 |

SN74HC125N Обзор

The Texas Instruments SN74HC125N is a four-element, non-inverting CMOS buffer with independently controlled three-state outputs, designed for a 2 V to 6 V supply range and supplied in a 14-pin PDIP package. Each buffer provides one active-low output-enable input and one data input, allowing four independent logic signals to be driven or disconnected.

A logic buffer is a digital IC that reproduces a binary input signal at its output while providing electrical isolation and drive strength between connected circuit sections. The SN74HC125 belongs to the 74HC CMOS logic family and operates as a bus buffer or line driver within a broader digital-logic hierarchy. Its three-state outputs can present a low level, a high level, or a high-impedance state, allowing multiple devices to share a bus when only one output is enabled at a time.

The four independent output-enable inputs are useful for bus isolation, bidirectional-style signal multiplexing, and processor or peripheral interface designs. The non-inverting architecture preserves the logical polarity of each data input. Because the outputs can enter a high-impedance state, designers can place several buffered devices on one shared signal path without allowing disabled outputs to fight each other during normal operation.

The SN74HC125N operates from a 2 V to 6 V power supply and uses three-state output behavior. Its 14-pin PDIP package is intended for through-hole assembly and is also practical for prototyping boards, legacy industrial equipment, and repair applications. The manufacturer identifies the device as a quadruple bus buffer with three-state outputs, while the product page describes it as a four-channel, 2 V to 6 V buffer family.

Typical uses include buffering shared data buses, isolating a peripheral from a multi-device bus, driving control signals into sections of a larger logic system, and creating selectable output paths. The individual enable inputs allow each of the four channels to participate in or be removed from a shared bus independently. This flexibility is valuable in systems where several sources must share conductors without continuous drive contention.

For reliable three-state operation, ensure that no more than one enabled output drives a shared node at the same time. Check the manufacturer datasheet for input thresholds, output current limits, load-capacitance limits, propagation delay, and input/output current limits before assigning a specific system operating condition or fanout requirement.

This page combines the Texas Instruments product information, the official SN74HC125 datasheet, verified distributor listings, and cross-reference findings with practical guidance for bus design, replacement assessment, and footprint-aware part selection.

Аналоги без доработки для SN74HC125N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

SN74HC125NE4

✅ Прямая замена
📦 14-PDIP
Same 4-channel, 3-state non-inverting buffer function and 14-pin PDIP footprint; product-ordering and manufacturing attributes may differ by 0% in key logic parameters.

📋 Справочный аналог (нет в каталоге)

CD74HC125E

✅ Прямая замена ⚠️ Характеристики не проверены
📦 14-PDIP
Same 4-channel 74HC125-family function and 14-pin PDIP package; timing and electrical limits require comparison between device revisions and ordering options.

📋 Справочный аналог (нет в каталоге)

M74HC125B1R

✅ Прямая замена
📦 14-PDIP
Same 4-channel, 3-state non-inverting buffer architecture and 14-pin PDIP footprint; manufacturer-specific timing and output-current limits may differ.

📋 Справочный аналог (нет в каталоге)

74AHCT125N

✅ Прямая замена
📦 14-PDIP
Same 4-channel, 3-state buffer and 14-pin PDIP layout, but AHCT input thresholds are TTL-compatible rather than conventional HC CMOS thresholds.

📋 Справочный аналог (нет в каталоге)

74HC125N

✅ Прямая замена
📦 14-PDIP
Same 4-channel, non-inverting, three-state logic function and 14-pin PDIP footprint; manufacturer-specific ratings and timing must be verified.

📋 Справочный аналог (нет в каталоге)

SN74HC125N Максимальные параметры и электрические характеристики

Product Type Quadruple non-inverting bus buffer with three-state outputs
Number of Elements 4 elements
Number of Channels 4 channels
Bits per Element 1 bit per element
Supply Voltage Range 2 V to 6 V
Тип выхода 3-state output
Logic Level CMOS
Input Polarity Non-inverting
Output Enable Control 4 independent active-low output-enable inputs
Корпус 14-PDIP, through-hole
Число выводов 14 pins
Тип монтажа Through-hole

Конфигурация выводов SN74HC125N

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Контакт 1 1OE — Active-low output enable for buffer 1
Контакт 2 1A — Data input for buffer 1
Контакт 3 1Y — Three-state output for buffer 1
Контакт 4 GND — Ground
Контакт 5 2OE — Active-low output enable for buffer 2
Контакт 6 2A — Data input for buffer 2
Контакт 7 2Y — Three-state output for buffer 2
Контакт 8 3Y — Three-state output for buffer 3
Контакт 9 3A — Data input for buffer 3
Контакт 10 3OE — Active-low output enable for buffer 3
Контакт 11 4Y — Three-state output for buffer 4
Контакт 12 4A — Data input for buffer 4
Контакт 13 4OE — Active-low output enable for buffer 4
Контакт 14 VCC — Power supply

Типичное применение

SN74HC125N подходит для 6 применениеs: Shared Data-Bus Isolation, Peripheral Interface Buffering, Selectable Signal Routing, Industrial Control Logic, Test and Measurement Interfacing, Retrofit and Prototype Logic.

🖥️

Shared Data-Bus Isolation

The SN74HC125N is suitable for placing several logic devices on one data conductor while ensuring that only one channel drives the bus at a time. Its four independent active-low output-enable inputs allow each buffer to be disconnected into a high-impedance state, reducing the risk of output contention. The device can therefore isolate processor, memory, and peripheral signals on a shared bus without requiring four separate single-channel buffers. When designing the circuit, assign one enable at a time to any shared node and review the manufacturer limits for output current, load capacitance, and transition behavior.

🔧

Peripheral Interface Buffering

The SN74HC125N provides a controlled interface between a logic bus and a peripheral whose outputs may need to be disconnected. Four non-inverting channels can buffer four related signals, while the individual three-state controls permit only the active peripheral to drive the shared lines. This arrangement can reduce loading on the originating device and make the bus direction unambiguous. The 2 V to 6 V operating range supports standard CMOS logic domains, and the 14-pin PDIP package simplifies through-hole prototyping and repair. Validate timing against the peripheral and the connected bus before finalizing the interface.

🧩

Selectable Signal Routing

The SN74HC125N can create a selectable signal path by driving a common node from one enabled buffer while the other outputs remain high impedance. With four data inputs and four active-low enable controls, the device supports compact multiplexing without requiring a separate general-purpose analog switch. Because the logic is non-inverting, the selected channel preserves the source signal polarity. The implementation is especially useful for routing compatible digital levels among several functional blocks. Confirm that every disabled output is connected only to a node it does not need to hold, and verify the datasheet's output drive and load-capacitance limits.

🏭

Industrial Control Logic

The SN74HC125N can buffer control and status signals within industrial logic assemblies where multiple subsystems connect to common conductors. Its four independent three-state channels support orderly bus participation, while non-inverting operation avoids altering the intended control polarity. The 14-pin PDIP package is useful for repairable, through-hole legacy equipment and for industrial prototypes requiring easy inspection and replacement. At commissioning, verify that firmware or discrete control logic enables only one driver for each shared node. Confirm operating-temperature requirements and electrical margins against the relevant equipment specification before deployment.

📟

Test and Measurement Interfacing

The SN74HC125N can isolate test-bus or fixture signals from the circuit under test by placing its outputs into a high-impedance state when they are not selected. This helps prevent inactive fixture channels from loading sensitive nodes. Four channels allow several related control or measurement-interface lines to be managed by one device, and the non-inverting operation simplifies correspondence with the source signal. The 2 V to 6 V range covers common CMOS test-equipment levels, subject to the actual interface voltage. Verify the input thresholds, timing, and capacitive loading at the connected fixture before using the buffer at higher signaling rates.

🛠️

Retrofit and Prototype Logic

The SN74HC125N is a practical choice for through-hole prototypes, educational assemblies, and repairs of older CMOS logic systems because it combines four buffers in one 14-pin PDIP package. Installers can use the active-low enable inputs to build simple multiplexing or isolation arrangements while retaining recognizable standard logic behavior. The 2 V to 6 V supply range permits operation in established 5 V designs and lower-voltage CMOS systems when the surrounding circuit supports it. For reliable construction, check orientation, supply decoupling, and the enable-state truth table in the official manufacturer datasheet before energizing the board.

Сводка рекомендуемых товаров

M74HC125B1R 74HC125-family bus-isolation alternative Используется в: Shared Data-Bus Isolation, Selectable Signal Routing, Test and Measurement Interfacing 74HC125N Four-channel three-state buffer alternative Используется в: Shared Data-Bus Isolation, Selectable Signal Routing, Test and Measurement Interfacing SN74HC125NE4 Texas Instruments 14-PDIP alternative Используется в: Peripheral Interface Buffering, Industrial Control Logic, Retrofit and Prototype Logic CD74HC125E Texas Instruments 74HC125-family alternative Используется в: Peripheral Interface Buffering, Retrofit and Prototype Logic 74AHCT125N TTL-compatible-input through-hole alternative Используется в: Industrial Control Logic
Where to download the SN74HC125N datasheet PDF?
The official SN74HC125N datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/ds/symlink/sn74hc125.pdf. It covers the SN74HC125 family's four-buffer configuration, three-state outputs, operating characteristics, and pin assignments. Use the manufacturer document for design decisions and the product page for ordering information, quality details, and package options.
What are the key specifications of SN74HC125N that engineers should know?
The SN74HC125N is a four-channel, non-inverting CMOS bus buffer with independently controlled three-state outputs, a 2 V to 6 V supply range, and a 14-pin PDIP package. Texas Instruments describes the SN74HC125 family as a four-channel buffer with three-state outputs, while distributor records identify SN74HC125N as a four-element, one-bit-per-element, non-inverting device.
What is the operating voltage of SN74HC125N?
The SN74HC125N operates from a 2 V to 6 V supply. Texas Instruments lists the SN74HC125 as a four-channel, 2 V to 6 V buffer, allowing operation across standard low-voltage CMOS supply domains. The manufacturer datasheet should be consulted for the exact input and output thresholds at each supported supply voltage.
Where can I find the SN74HC125N pinout?
The SN74HC125N pinout is published in the official Texas Instruments SN74HC125 datasheet. The 14-pin PDIP device uses one data input, one active-low output enable, and one three-state output for each buffer, along with supply and ground pins. Use the pin-description table and package drawing together when creating the PCB footprint.
How many channels does SN74HC125N have?
The SN74HC125N contains four independent non-inverting buffer channels. Each channel has one data input, one active-low output-enable input, and one three-state output. Texas Instruments describes the device family as a four-channel buffer with three-state outputs, and distributor records identify the N suffix as the 14-pin PDIP configuration.
What can replace the SN74HC125N?
A valid SN74HC125N replacement must use the same 14-pin PDIP footprint, provide four non-inverting buffers, and include four independently controlled three-state outputs. SN74HC125NE4, CD74HC125E, M74HC125B1R, 74AHCT125N, and 74HC125N are relevant candidates, but voltage thresholds, input compatibility, output ratings, and exact enable polarity should be compared before production substitution.
Is SN74HC125N the same as M74HC125B1R?
SN74HC125N and M74HC125B1R both appear in the 14-pin PDIP 74HC125 family and provide four non-inverting buffers with three-state outputs. They are therefore strong footprint candidates, but manufacturer-specific input thresholds, output-current limits, propagation timing, and qualification requirements must be checked in the respective datasheets before treating the substitution as production-equivalent.
When should I choose SN74HC125N over 74AHCT125N?
Choose SN74HC125N when the interface uses CMOS-compatible input levels across a 2 V to 6 V CMOS environment. Consider 74AHCT125N when the connected logic specifically benefits from TTL-compatible input thresholds while the buffer still operates from a 2 V to 6 V supply. The choice should be based on the actual input voltage levels and timing requirements of the bus.
SN74HC125N vs CD74HC125E - which is better for a through-hole bus design?
Both SN74HC125N and CD74HC125E are presented as 14-pin PDIP quadruple three-state bus buffers, so both suit a through-hole layout. SN74HC125N has the newer Texas Instruments product-page identity, while CD74HC125E is an older-family candidate. Compare their manufacturer specifications for input thresholds, timing, output current, and operating-temperature limits before choosing.
Is SN74HC125N suitable for a shared data bus?
The SN74HC125N is suitable for a shared data bus because each of its four outputs can be disabled into a high-impedance state. The active-low output-enable inputs let the designer select which channel drives the common node. Ensure that only one enabled output connects to a shared conductor at a time, and observe the datasheet's load-current and capacitance limits.
Where to buy SN74HC125N online?
Use the Request a Quote form on this page to request SN74HC125N pricing, stock confirmation, and current lead time. The form is the appropriate route for an exact MPN and package query, including the 14-pin PDIP configuration, without relying on a static price or an assumed availability status.
What is the lead time for SN74HC125N?
Request the current SN74HC125N lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, manufacturing status, and inventory conditions, so the form should be used to obtain a current commitment for the exact Texas Instruments part number rather than an estimated schedule.
Is SN74HC125N in stock?
Current SN74HC125N inventory should be confirmed through the Request a Quote form on this page. The form accepts the exact MPN and requested quantity, allowing the order team to check the latest supply position instead of publishing a potentially stale stock statement. For prototyping, also account for normal component-handling and assembly lead time.
What is the price of SN74HC125N?
Request a current SN74HC125N quotation through the Request a Quote form on this page. The form can confirm pricing for the exact 14-pin PDIP MPN and the required order quantity. Pricing should be evaluated with current availability and lifecycle considerations rather than copied from a historical listing or an unqualified family-level price.
How do the three-state outputs work in SN74HC125N?
Each SN74HC125N output can be driven high, driven low, or placed in a high-impedance state according to its data input and active-low output-enable input. When the enable input is high, the corresponding output is disabled; when it is low, the output follows the non-inverting data input. This allows multiple channels or devices to share a bus without continuous output contention.
Does SN74HC125N support TTL-compatible inputs?
The SN74HC125N belongs to the 74HC CMOS family, whose input thresholds are not automatically equivalent to those of the 74AHCT family. If the connected source uses TTL levels or unusual voltage thresholds, compare the SN74HC125N input specifications with the AHCT alternative such as 74AHCT125N. The appropriate choice depends on the actual high and low levels presented to the buffer.
What is the best cross-brand equivalent for SN74HC125N?
The M74HC125B1R is a prominent cross-brand candidate because it is identified as a 14-pin PDIP member of the 74HC125 family. A valid replacement must also preserve four non-inverting channels, three-state outputs, individual output-enable control, supply range, and electrical limits. Confirm the complete ordering code and review the manufacturer datasheet before approving it as a drop-in substitute.

Справочные инженерные данные для SN74HC125N — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose SN74HC125N for a through-hole design that requires four non-inverting buffers with independently controlled three-state outputs and conventional 74HC CMOS input behavior. Choose SN74HC125NE4 when you want a closely related Texas Instruments ordering option in the same 14-PDIP footprint, after checking its ordering attributes and electrical specifications. Consider CD74HC125E for legacy 74HC-family procurement or repair, provided its revision-specific timing and ratings are acceptable. M74HC125B1R is a useful cross-brand alternative for a 14-pin DIP design, but its manufacturer-specific limits must be reviewed. Select 74AHCT125N only when TTL-compatible input thresholds are desired rather than standard HC CMOS thresholds. In every case, confirm the pin orientation, enable polarity, supply range, load capacitance, output current, and propagation timing before approving a substitution.

Сравнение с аналогами

Параметр Этот товар SN74HC125NE4 CD74HC125E M74HC125B1R 74AHCT125N 74HC125N
Package 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP
Brand Texas Instruments Texas Instruments Texas Instruments STMicroelectronics Nexperia Nexperia
Number of Channels 4 4 4 4 4 4
Output Type 3-state output 3-state output 3-state output 3-state output 3-state output 3-state output
Logic Polarity Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting
Output Enable 4 independent active-low enables 4 independent active-low enables 4 independent active-low enables 4 independent active-low enables 4 independent active-low enables 4 independent active-low enables
Mounting Style Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole
Input Threshold Family 74HC CMOS 74HC CMOS 74HC CMOS 74HC CMOS 74AHCT TTL-compatible 74HC CMOS

Ключевые отличия

  • Four independently controlled three-state channels in one through-hole package (против 74AHCT125N)
  • Uses standard 74HC CMOS input thresholds for CMOS-system compatibility (против 74AHCT125N)
  • Direct footprint compatibility with established 14-PDIP 74HC125-family devices (против M74HC125B1R)

Заметки по проектированию

Ensure that only one enabled output connects to any shared bus node. The three-state output becomes high impedance when its active-low output-enable input is high, but two simultaneously enabled channels can still create output contention if they drive different levels into the same conductor. Review the complete enable truth table and assign disjoint enable controls before connecting multiple devices to a common bus.

Keep the SN74HC125N close to the logic family that drives or receives its buffered signals, especially when the net has appreciable capacitance. The 14-pin PDIP format makes breadboard and through-hole prototype construction straightforward, but long point-to-point wiring can add propagation delay and susceptibility to noise. Use short, direct traces on assembled boards and maintain a common ground reference between the buffer and connected logic devices.

Apply a stable supply within the documented 2 V to 6 V range and follow the manufacturer recommendations for bypassing and unused inputs. Do not allow a signal to exceed the device's specified input limits, particularly during power-up, power-down, or bus contention. The SN74HC125N has no three-state input; unused data inputs should be tied to a defined valid logic level rather than left floating.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The SN74HC125N is a general-purpose logic IC rather than an automotive-qualified device. Specific environmental and material compliance declarations should be confirmed against the current manufacturer product documentation.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

sn74hc125n datasheet SN74HC125N datasheet pdf SN74HC125N pinout SN74HC125N DIP-14 SN74HC125N three-state buffer SN74HC125N 2V to 6V Texas Instruments SN74HC125N SN74HC125N equivalent SN74HC125N replacement SN74HC125N cross reference SN74HC125N vs M74HC125B1R SN74HC125N vs 74AHCT125N SN74HC125N footprint SN74HC125N price SN74HC125N stock

Связанные компоненты & термины

Texas Instruments SN74HC125N SN74HC125 SN74HC125NE4 CD74HC125E M74HC125B1R 74AHCT125N 74HC125N logic buffer bus buffer line driver tri-state output three-state output high-impedance state non-inverting buffer 74HC CMOS logic 74AHCT TTL-compatible logic 2 V to 6 V supply 14-PDIP package through-hole mounting active-low output enable shared data bus peripheral isolation Texas Instruments SN74HC125 datasheet
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ