SN74HC4060 - 14-Stage Binary Counter & Oscillator | TI
Артикул: SN74HC4060 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0.45 | $0,45 |
| 10 | $0.38 | $3,80 |
| 100 | $0.29 | $29,00 |
| 500 | $0.24 | $120,00 |
| 1.000 | $0.19 | $190,00 |
SN74HC4060 Обзор
A binary counter is a digital circuit that counts in binary sequence, incrementing on each clock pulse. The SN74HC4060 specifically is an asynchronous (ripple) counter, meaning each stage's output triggers the next, resulting in a simple but effective frequency division. It belongs to the 74HC family of high-speed CMOS logic, which combines the low power consumption of CMOS with the speed of TTL. The oscillator section allows the device to generate its own clock signal using either an RC network or a crystal, eliminating the need for an external clock source.
Key features include a 14-stage ripple-carry binary counter, an integrated oscillator supporting RC or crystal configurations, a master reset (CLR) input that disables the oscillator and clears the counter, and a clock input (CLKI) that increments the counter on high-to-low transitions. The device also offers a low input current of 1 µA max and a low power consumption of 80 µA max ICC, making it ideal for battery-powered applications.
Technically, the SN74HC4060 uses high-speed CMOS technology, providing a balanced combination of speed and power efficiency. The oscillator section can be configured with external components to generate frequencies from sub-Hz to several MHz, depending on the RC or crystal values. The counter stages divide the oscillator frequency by powers of two, allowing precise frequency division for timing applications. The clear function ensures the counter can be reset to zero at any time, which is essential for synchronized operations.
Typical applications include frequency dividers, timers, and oscillator circuits in consumer electronics, industrial control systems, and communication devices. For example, it can be used to generate precise time delays in microcontroller systems or to divide a crystal oscillator frequency down to a usable clock for peripherals. Its wide operating voltage range and robust output drive make it compatible with both 3.3V and 5V logic systems.
When designing with the SN74HC4060, ensure that the oscillator components are placed close to the IC to minimize parasitic capacitance and noise. For crystal oscillators, use the recommended load capacitors as specified in the datasheet. Also, consider the counter's asynchronous nature, which may introduce glitches on outputs; adding output flip-flops can synchronize the count if needed.
Аналоги без доработки для SN74HC4060 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
CD74HC4060M
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CD74HC4060E
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC74HC4060ADR2G
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
HEF4060BT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CD4060BM96
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
SN74HC4060 Максимальные параметры и электрические характеристики
| Функция | 14-Stage Asynchronous Binary Counter and Oscillator |
| Number of Bits | 14 |
| Supply Voltage Range | 2 V to 6 V |
| Output Drive | ±4 mA at 5 V |
| Input Current | 1 µA max |
| Max ICC | 80 µA |
| Propagation Delay (tpd) | 14 ns typical |
| Clock Trigger Type | Negative Edge |
| Oscillator Support | RC or Crystal |
| Clear Input | Active High |
| Диапазон рабочих температур | -40°C to +85°C |
| Package Options | 16-SOIC, 16-PDIP, 16-TSSOP |
| Тип монтажа | Surface Mount or Through Hole |
| Статус RoHS | Compliant |
| Logic Family | 74HC |
Конфигурация выводов SN74HC4060
| Контакт 1 | Q12 — Counter output bit 12 |
| Контакт 2 | Q13 — Counter output bit 13 |
| Контакт 3 | Q14 — Counter output bit 14 |
| Контакт 4 | Q6 — Counter output bit 6 |
| Контакт 5 | Q5 — Counter output bit 5 |
| Контакт 6 | Q7 — Counter output bit 7 |
| Контакт 7 | Q4 — Counter output bit 4 |
| Контакт 8 | GND — Ground |
| Контакт 9 | CLKI — Clock input (negative edge triggered) |
| Контакт 10 | CLKO — Oscillator output |
| Контакт 11 | CLKO — Oscillator inverted output |
| Контакт 12 | CLR — Clear input (active high) |
| Контакт 13 | Q1 — Counter output bit 1 |
| Контакт 14 | Q0 — Counter output bit 0 |
| Контакт 15 | Q2 — Counter output bit 2 |
| Контакт 16 | VCC — Positive supply voltage |
Типичное применение
SN74HC4060 подходит для 6 применениеs: Frequency Divider, Timer Circuits, Oscillator Circuits, LED Flasher, Industrial Timers, Battery-Powered Devices.
Frequency Divider
The SN74HC4060 divides an input frequency by powers of two, making it ideal for generating lower-frequency clocks from a high-frequency oscillator. For example, with a 32.768 kHz crystal, the Q14 output provides a 2 Hz signal for real-time clocks. Its low power consumption (80 µA max) suits battery-powered devices. The counter's asynchronous nature means outputs may glitch, so external flip-flops can synchronize them if needed.
Рекомендуется
Timer Circuits
The SN74HC4060 can create precise time delays by counting oscillator pulses. For instance, an RC oscillator with R=100kΩ and C=1µF produces a frequency of about 4.5 Hz, and the Q14 output toggles every 3640 seconds (about 1 hour). This makes it useful for interval timers in appliances or industrial equipment. The clear input allows resetting the count, enabling repeatable timing cycles.
Рекомендуется
Oscillator Circuits
The integrated oscillator supports both RC and crystal configurations, providing a stable clock source without an external oscillator IC. For crystal operation, the SN74HC4060 can generate frequencies up to several MHz with proper load capacitors. This is ideal for microcontroller systems needing a secondary clock or for generating a precise timebase. The oscillator's low power consumption is beneficial for always-on applications.
Рекомендуется
LED Flasher
By using the SN74HC4060 as a frequency divider, you can create LED flashers with adjustable rates. For example, with an RC oscillator set to 1 Hz, the Q4 output provides a 0.0625 Hz signal, causing an LED to blink every 16 seconds. The device can drive LEDs directly through a resistor, as it can source or sink up to 4 mA at 5V. This is a simple, low-cost solution for status indicators.
Рекомендуется
Industrial Timers
In industrial control systems, the SN74HC4060 can generate precise timing intervals for process control, such as conveyor belt delays or machine cycle times. Its wide operating voltage (2V to 6V) allows integration with both 3.3V and 5V logic. The robust output drive (±4 mA) can interface with relays or optocouplers through a transistor. The device's low power consumption reduces heat in enclosed panels.
Рекомендуется
Battery-Powered Devices
The SN74HC4060's low power consumption (80 µA max) makes it ideal for battery-powered devices that require periodic wake-up or timing functions. For example, a sensor node can use the counter to wake up every few seconds to take a measurement, then return to sleep. The oscillator can be gated by the clear input to save power when not needed. This extends battery life significantly.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SN74HC4060 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CD74HC4060M | MC74HC4060ADR2G | HEF4060BT |
|---|---|---|---|---|
| Package | 16-SOIC, 16-PDIP, 16-TSSOP | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | onsemi | NXP Semiconductors |
| Number of Stages | 14 | 14 | 14 | 14 |
| Supply Voltage Range | 2V to 6V | 2V to 6V | 2V to 6V | 3V to 15V |
| Propagation Delay (tpd) | 14 ns typical | 14 ns typical | 14 ns typical | 60 ns typical |
| Output Drive | ±4 mA at 5V | ±4 mA at 5V | ±4 mA at 5V | ±1 mA at 5V |
| Max ICC | 80 µA | 80 µA | 80 µA | 20 µA |
| Oscillator Support | RC or Crystal | RC or Crystal | RC or Crystal | RC or Crystal |
Ключевые отличия
- Integrated oscillator with RC or crystal support (против CD4060BM96)
- High-speed CMOS technology (против HEF4060BT)
- Wide operating voltage range (против MC74HC4060ADR2G)
Заметки по проектированию
Place the oscillator components (resistor and capacitor for RC, or crystal and load capacitors) as close to the CLKI and CLKO pins as possible to minimize parasitic capacitance and noise. Use short traces and a ground plane to reduce interference. For crystal oscillators, follow the manufacturer's recommended load capacitance values to ensure accurate frequency.
Decouple the VCC pin with a 0.1 µF ceramic capacitor placed close to the IC. The SN74HC4060 operates from 2V to 6V, so ensure the supply voltage is stable and within this range. At higher frequencies, the dynamic current may increase, so a larger bulk capacitor (e.g., 10 µF) may be needed on the power rail.
The counter is asynchronous, so outputs may glitch during transitions. If glitch-free outputs are required, use external flip-flops to synchronize the outputs. Also, the clear input (CLR) is active high; ensure it is tied to ground when not used to prevent accidental clearing. Do not leave unused inputs floating; tie them to VCC or GND as appropriate.
Информация о соответствии
RoHS compliant per TI product page. Not AEC-Q100 qualified.
