MaxLinear

SP3232EUEA-L/TR - 1 Mbps RS-232 Transceiver | MaxLinear

Артикул: SP3232EUEA-L/TR ✓ Активен
3.3 V Vdss 16-SSOP Package
MOQ: 1 |

SP3232EUEA-L/TR Обзор

The MaxLinear SP3232EUEA-L/TR is a 3.3 V RS-232 transceiver with two drivers and two receivers, a maximum data rate of 1000 kbps, and a 16-SSOP package. Designed for portable and embedded systems, it combines bidirectional RS-232 signal conditioning with an integrated charge-pump supply that supports operation from a single low-voltage source. The SP3232EU family is specifically positioned for notebook, palmtop, industrial, and instrument applications requiring reliable serial communication without a separate external RS-232 supply.

An RS-232 transceiver is an interface IC that converts low-voltage digital logic levels into RS-232-compatible voltage levels and converts incoming RS-232 signals back into logic-compatible levels. Within the interface hierarchy, it is a physical-layer transceiver: logic ICs and microcontrollers generate the data, while the SP3232EUEA-L/TR handles voltage translation, noise margin, and line-driver capability. Two drivers and two receivers support two communication channels or paired full-duplex links.

The SP3232EUEA-L/TR operates at 3.3 V and supports a maximum data transmission rate of 1000 kbps. Its high-efficiency charge-pump supply requires only 0.1 µF capacitors for 3.3 V operation, reducing the external component count compared with conventional RS-232 designs that use larger pump capacitors. The integrated drivers and receivers also reduce board area while preserving separate transmit and receive paths.

The device is packaged in a 16-SSOP and supplied in tape-and-reel packaging for automated assembly. The -L/TR ordering form identifies the leaded 16-pin package and tape-and-reel shipment configuration. Its interface architecture is suitable for compact control panels, portable test equipment, configuration ports, and service interfaces where a legacy RS-232 connector must connect to a modern low-voltage UART.

Typical applications include notebook-style service connections, industrial controller diagnostics, laboratory instrument control, point-of-sale equipment, and embedded debug interfaces. The 1000 kbps capability allows the transceiver to handle substantially faster data than a conventional low-speed RS-232 port, provided that the UART, cable, connector, and system timing are designed for the selected baud rate.

When laying out the circuit, place the charge-pump capacitors and transceiver interface components close to their associated pins. Route the RS-232 driver and receiver traces away from sensitive clock, sensor, and analog inputs. Confirm the logic-side supply level, UART signal polarity, and connector pin assignment before power-up because a wiring error at the RS-232 connector can defeat otherwise correct logic-side communication.

This page organizes the manufacturer specifications, sourcing information, same-package family alternatives, and practical interface-layout guidance into one engineering-focused reference. It also distinguishes verified device facts from parameters that require confirmation against the complete manufacturer datasheet and the specific PCB implementation.

Аналоги без доработки для SP3232EUEA-L/TR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с SP3232EUEA-L/TR (тот же форм-фактор и посадочное место) — отличается по Package, Mounting Type, Charge-Pump Capacitor Requirement, Maximum Data Rate, Transceiver Configuration.

MaxLinear
Package: 16-pin PDIP
Mounting Type: Through-hole
Charge-Pump Capacitor Requirement: 0.1uF in 3.3V operation
MaxLinear
Package: 16-pin SSOP
Mounting Type: SMD
Transceiver Configuration: 2/2 full-duplex
MaxLinear
Package: 16-TSSOP
Mounting Type: SMD
Maximum Data Rate: 120kbps
MaxLinear
Package: 16-pin SSOP
Charge-Pump Capacitor Requirement: 0.1 µF at 3.3 V
Transceiver Configuration: 2 transmitters and 2 receivers

SP3223EUEA-L/TR

✅ Прямая замена
📦 16-SSOP
Same 16-SSOP and 3.3 V 2/2 RS-232 channel arrangement; individual control and electrical differences must be confirmed, with key published operating values differing by 0%

📋 Справочный аналог (нет в каталоге)

SP3232EEA-L

✅ Прямая замена
MaxLinear
📦 16-SSOP
RS-232 transceiver IC · 2 transmitters and 2 receivers · 120 kbps minimum under full load · 3 V to 5.5 V · 1 mA · 1 µA · 0.1 µF at 3.3 V · -40°C to +85°C

Уточнить цену

Открыть даташит →

SP3232ECY-L/TR

✅ Прямая замена
MaxLinear
📦 16-SSOP
RS-232 transceiver · 2 · 2 · Full duplex · 3V to 5.5V · 120kbps · 1mA · 0°C to 70°C

Уточнить цену

Открыть даташит →

SP3232ECA-L/TR

✅ Прямая замена
MaxLinear
📦 16-SSOP
RS-232 transceiver · 2/2 full-duplex · 2 · 2 · 120 kbps · 3.0 V to 5.5 V · 1 mA · 0.1 µF

Уточнить цену

Открыть даташит →

SP3232EUEA-L/TR Характеристики

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Maximum Data Rate 1000 kbps
Nominal Supply Voltage 3.3 V
Supply Voltage Range 3 V to 5.5 V
Charge-Pump Capacitor Requirement 0.1 µF at 3.3 V operation
Корпус 16-SSOP
Число выводов 16 pins
Тип монтажа Surface mount
Packaging Tape & Reel

Руководство по цоколевке SP3232EUEA-L/TR в корпусе 16-ssop

Цоколевка для SP3232EUEA-L/TR (корпус 16-ssop). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16-ssop для SP3232EUEA-L/TR

Нет подробных данных о распиновке для SP3232EUEA-L/TR.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

SP3232EUEA-L/TR подходит для 6 применениеs: Portable Instrument Service Port, Industrial Controller Diagnostics, Laboratory Test Equipment Control, Point-of-Sale Terminal Interface, Embedded Configuration and Debug, Network Equipment Maintenance Console.

📱

Portable Instrument Service Port

The SP3232EUEA-L/TR fits a portable instrument service port that must retain an RS-232 connector while using a modern 3.3 V controller. Its two drivers and two receivers support paired communication paths, while the 1000 kbps maximum data rate supports faster configuration and firmware-transfer procedures. The integrated charge pump needs only 0.1 µF capacitors in 3.3 V operation, reducing board area. Use the logic-side UART connections for firmware updates and the external driver and receiver pins for the DE-9 or equivalent RS-232 connector.

🏭

Industrial Controller Diagnostics

The SP3232EUEA-L/TR is appropriate for an industrial controller diagnostic connector where technicians connect a laptop or service terminal to a legacy RS-232 port. The 3 V to 5.5 V supply range supports compact embedded systems, and the 2/2 transceiver arrangement permits two communication paths. At up to 1000 kbps, it can handle status queries and configuration transfers efficiently, while the 16-SSOP package preserves PCB area. Keep the high-voltage RS-232 traces separated from sensitive analog and process-control signals.

🖥️

Laboratory Test Equipment Control

The SP3232EUEA-L/TR can connect laboratory instruments and automated test systems through an RS-232 control port. Its maximum data rate of 1000 kbps supports command exchange and measurement-result transfers when paired with a suitably configured UART. Two drivers and two receivers provide flexibility for two ports or a full-duplex arrangement, and the small 16-SSOP footprint supports compact instrument electronics. Use shielded cable routing and protected connector placement to reduce noise and ESD exposure at the external interface.

🖥️

Point-of-Sale Terminal Interface

The SP3232EUEA-L/TR supports a point-of-sale terminal or peripheral that exposes an RS-232 service or receipt interface. The 3.3 V operation is suitable for embedded systems with limited supply headroom, and the charge-pump implementation reduces the external capacitor size to 0.1 µF. Two drivers and two receivers allow more than one external channel when needed. Designers should isolate the logic and connector grounds according to the system grounding strategy and route transceiver outputs away from switching power and display signals.

🔧

Embedded Configuration and Debug

The SP3232EUEA-L/TR is useful for an embedded configuration port exposed through a legacy RS-232 connector. It translates between a 3.3 V UART and RS-232 levels while supporting operation at up to 1000 kbps, making it suitable for rapid boot configuration, diagnostics, and field-service access. The 16-SSOP package helps conserve PCB area, and the integrated charge pump simplifies the external power circuit. Add suitable connector-level ESD protection and define unambiguous boot-mode, ground, and signaling conventions.

🌐

Network Equipment Maintenance Console

The SP3232EUEA-L/TR can provide a maintenance-console connection in routers, switches, or other network appliances. Two drivers and two receivers support multiple RS-232 paths, and the 1000 kbps rate provides useful headroom for console output, configuration transfer, and management scripts. The device’s 3.3 V operation and compact 16-SSOP package suit space-constrained electronics. Place the external connector near the board edge, control ESD exposure, and maintain separation between RS-232 traces and high-speed Ethernet or switching-node circuitry.

Сводка рекомендуемых товаров

STM32F103C8T7 STMicroelectronics Используется в: Portable Instrument Service Port STM32F103RGT6 STMicroelectronics Используется в: Portable Instrument Service Port MAX232NSR Texas Instruments Используется в: Portable Instrument Service Port STM32F746VET6TR STMicroelectronics Используется в: Industrial Controller Diagnostics STM32L151G6U3 Low-power controller for diagnostic equipment Используется в: Industrial Controller Diagnostics ADM485JNZ Analog Devices Используется в: Industrial Controller Diagnostics STM32F765ZGT6TR STMicroelectronics Используется в: Laboratory Test Equipment Control STM32F103ZET6TR STMicroelectronics Используется в: Laboratory Test Equipment Control ISO1042BDWR Texas Instruments Используется в: Laboratory Test Equipment Control STM32F103RCT6 STMicroelectronics Используется в: Point-of-Sale Terminal Interface STM32F030R8TR Low-cost controller for simple service interfaces Используется в: Point-of-Sale Terminal Interface SP232EET-L MaxLinear Используется в: Point-of-Sale Terminal Interface STM32F103V8ET6 Microcontroller with UART-based configuration interface Используется в: Embedded Configuration and Debug ATtiny88-AUR Small controller for auxiliary configuration functions Используется в: Embedded Configuration and Debug SP232AET-L MaxLinear Используется в: Embedded Configuration and Debug LAN8742-CZ-TR Microchip Technology Используется в: Network Equipment Maintenance Console DP83867IRRGZR Texas Instruments Используется в: Network Equipment Maintenance Console STM32F746NGH6TR STMicroelectronics Используется в: Network Equipment Maintenance Console
What is the SP3232EUEA-L/TR?
The SP3232EUEA-L/TR is a 3.3 V RS-232 transceiver from MaxLinear with two drivers, two receivers, and a maximum data rate of 1000 kbps. According to the MaxLinear SP3222EU and SP3232EU datasheet, the device is intended for portable and hand-held systems. It uses an integrated charge-pump supply that requires only 0.1 µF capacitors during 3.3 V operation and is packaged in a 16-SSOP.
What is the operating voltage of the SP3232EUEA-L/TR?
The SP3232EUEA-L/TR is a 3.3 V RS-232 transceiver with a documented 3 V to 5.5 V supply range. The MaxLinear SP3222EU and SP3232EU datasheet identifies the integrated charge-pump arrangement as a way to provide RS-232 signal levels from a single supply. Confirm the absolute maximum ratings and operating limits in the complete manufacturer datasheet before applying the device to a new power rail.
How fast is the SP3232EUEA-L/TR RS-232 transceiver?
The SP3232EUEA-L/TR supports data rates up to 1000 kbps. According to the MaxLinear SP3222EU and SP3232EU datasheet, this rate meets the requirements of high-speed RS-232 applications while retaining a simple single-supply charge-pump architecture. Actual command throughput also depends on UART oscillator accuracy, character framing, protocol overhead, cable characteristics, and receiver timing margin.
How many RS-232 channels does the SP3232EUEA-L/TR provide?
The SP3232EUEA-L/TR provides two RS-232 drivers and two RS-232 receivers. This 2/2 arrangement can serve two independent transmit channels, two independent receive channels, or two full-duplex communication ports when the appropriate transmit and receive signals are paired. The MaxLinear product page identifies it as a 2-driver, 2-receiver RS-232 transceiver solution.
Where can I download the SP3232EUEA-L/TR datasheet PDF?
The official manufacturer datasheet is available from MaxLinear at https://www.maxlinear.com/ds/sp3222eu_sp3232eu.pdf. It covers the SP3222EU and SP3232EU families, including electrical characteristics, charge-pump operation, driver and receiver behavior, and application information. Use the pin-description and typical-application sections when assigning the 16-SSOP footprint and wiring the UART interface.
Where can I find the SP3232EUEA-L/TR pinout?
The SP3232EUEA-L/TR pinout is defined in the pin-description section of the MaxLinear SP3222EU and SP3232EU datasheet. The package is a 16-SSOP, and the ordering suffix identifies the leaded package used by this variant. Use the manufacturer pin table when assigning VCC, ground, charge-pump capacitor, driver-output, and receiver-input nets to the PCB.
What capacitors does the SP3232EUEA-L/TR charge pump require?
The SP3232EUEA-L/TR charge-pump supply requires 0.1 µF capacitors when operated at 3.3 V. According to the MaxLinear SP3222EU and SP3232EU datasheet, this high-efficiency pump architecture supports true RS-232 performance from a single low-voltage supply. Place the required pump capacitors close to their designated pins and follow the manufacturer layout and capacitor-tolerance guidance.
Is SP3232EUEA-L/TR suitable for a 3.3 V microcontroller UART?
Yes, the SP3232EUEA-L/TR is suitable for a 3.3 V microcontroller UART because it operates from a 3 V to 5.5 V supply and provides dedicated logic-side driver and receiver paths. Connect the UART transmit and receive signals to the appropriate logic-side pins, while routing the external driver and receiver pins to the RS-232 connector. Confirm logic thresholds and signal polarity against the manufacturer datasheet.
What is the difference between SP3232EUEA-L/TR and SP3223EUEA-L/TR?
Both are MaxLinear 3.3 V, 2/2 RS-232 transceivers in the same 16-SSOP family, but their detailed electrical and feature sets must be checked independently. The SP3232EUEA-L/TR is documented at up to 1000 kbps with an integrated charge-pump supply requiring 0.1 µF capacitors at 3.3 V. Confirm enable, shutdown, or other control-function differences in the datasheet before treating either part as a substitution.
SP3232EUEA-L/TR vs SP3232EEA-L - which is the better replacement choice?
SP3232EEA-L is the closest same-family option to evaluate because it lacks only the -TR order suffix shown for the target tape-and-reel ordering code. The SP3232EUEA-L/TR itself is identified as a 16-SSOP, 3.3 V, 2/2 RS-232 transceiver operating up to 1000 kbps. Verify package drawing, pin mapping, lifecycle status, and orderable packaging before approving the alternative.
When should I choose SP3232EUEA-L/TR over another RS-232 transceiver?
Choose the SP3232EUEA-L/TR when the design needs two drivers, two receivers, a 3.3 V supply, and RS-232 data rates up to 1000 kbps in a 16-SSOP footprint. According to the MaxLinear family datasheet, the charge pump requires only 0.1 µF capacitors at 3.3 V. Alternatives become appropriate when they provide the same pin mapping plus required shutdown, automotive, or extended-temperature features.
What can replace the SP3232EUEA-L/TR?
The closest documented replacement path is another MaxLinear 16-SSOP member with the same 2/2 RS-232 channel count, 3.3 V operation, and 1000 kbps class of performance. SP3223EUEA-L/TR and SP3232EEA-L are candidates for comparison. A replacement should not be approved solely by package appearance; confirm pin-to-pin compatibility, control functions, supply limits, and electrical characteristics in the manufacturer documentation.
Is SP3232EUEA-L/TR the same as a MAX232 RS-232 transceiver?
The SP3232EUEA-L/TR is not automatically interchangeable with a MAX232 solely because both are RS-232 transceivers. The target has two drivers, two receivers, 3.3 V operation, 1000 kbps capability, and a 16-SSOP package, but a MAX232 variant may use a different package, pinout, supply arrangement, or control interface. Use the MAX232 manufacturer datasheet to confirm every connection before substitution.
Where can I buy SP3232EUEA-L/TR and what is the lead time?
The SP3232EUEA-L/TR can be requested through the Request a Quote form on this page, where the current unit availability, order quantity, lead time, and delivery options should be confirmed for the selected tape-and-reel configuration. Current lead-time and stock commitments change with demand and manufacturing schedules, so request a quotation for the exact MPN rather than relying on a historical listing status.
What is the price of SP3232EUEA-L/TR?
The current price for SP3232EUEA-L/TR should be obtained through the Request a Quote form on this page. Quote scope depends on quantity, order breaks, delivery destination, and the required tape-and-reel shipment format. Submit the exact MPN SP3232EUEA-L/TR and your target quantity so the response reflects current commercial terms rather than an obsolete or family-level price.
Is SP3232EUEA-L/TR in stock?
Current stock for SP3232EUEA-L/TR should be confirmed through the Request a Quote form on this page. Use the exact MPN and specify the required quantity, reel format, and delivery location. Because distributor inventory and manufacturer schedules can change quickly, stock confirmation should be obtained for the production quantity rather than inferred from an individual product page.
What are the key specifications of SP3232EUEA-L/TR that engineers should know?
The SP3232EUEA-L/TR combines two drivers, two receivers, a 3.3 V supply, 1000 kbps maximum data rate, and a 16-SSOP package. According to the MaxLinear SP3222EU and SP3232EU datasheet, its charge-pump supply requires only 0.1 µF capacitors in 3.3 V operation. These characteristics make it appropriate for compact embedded systems that need RS-232 level translation from a low-voltage UART.

Справочные инженерные данные для SP3232EUEA-L/TR — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the SP3232EUEA-L/TR for a compact 3.3 V system that needs two RS-232 drivers, two receivers, operation up to 1000 kbps, and a 16-SSOP footprint. Its integrated charge pump simplifies the supply arrangement by using 0.1 µF capacitors in 3.3 V operation. Consider SP3223EUEA-L/TR when reviewing a closely related MaxLinear family option, but verify its individual control and electrical characteristics. SP3232EEA-L is a practical same-family candidate distinguished from the target primarily by the ordering suffix, while SP3232ECY-L/TR and SP3232ECA-L/TR require confirmation of package, temperature, and feature details. Do not select a generic MAX232, SP232, or SP490 solely by function: MAX232 variants may differ in package and pinout, SP232 parts have fewer channels, and SP490 devices target RS-485 or RS-422 rather than RS-232. Confirm the final substitute against the manufacturer pin table, supply limits, timing characteristics, and mechanical drawing.

Сравнение с аналогами

Параметр Этот товар SP3223EUEA-L/TR SP3232EEA-L SP3232ECY-L/TR SP3232ECA-L/TR
Brand MaxLinear MaxLinear MaxLinear MaxLinear MaxLinear
Package 16-SSOP 16-SSOP - same 16-SSOP - same 16-SSOP - same 16-SSOP - same
Transceiver Configuration 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers
Nominal Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Maximum Data Rate 1000 kbps 1000 kbps 1000 kbps 1000 kbps 1000 kbps
Charge-Pump Capacitor at 3.3 V 0.1 µF 0.1 µF 0.1 µF 0.1 µF 0.1 µF
Pin Count 16 pins 16 pins 16 pins 16 pins 16 pins

Ключевые отличия

  • Two-channel RS-232 interface in a compact 16-SSOP (против SP232EET-L)
  • High-speed operation for compact embedded equipment (против SP3223EUEA-L/TR)
  • Single-supply RS-232 operation (против SP490EEN-L/TR)

Заметки по проектированию

Place the 0.1 µF charge-pump capacitors close to the pins designated by the manufacturer pin table, using short traces and an appropriate ground reference. The capacitors convert the single supply into the bipolar voltage required by the RS-232 drivers, so long or high-impedance capacitor connections can degrade charge-pump operation. Follow the datasheet layout pattern for capacitor placement and avoid routing those nodes beneath noisy switching stages.

Keep the external RS-232 driver and receiver traces away from UART clocks, sensor inputs, precision analog signals, and switching-converter loops. The RS-232 interface uses larger voltage swings than the logic side, so unintended capacitive or inductive coupling can create data errors. Route these nets as short as practical, keep the connector near the board edge, and provide a clear chassis or signal-ground return according to the equipment grounding architecture.

Do not assume that any RS-232 transceiver with the same channel count is pin-compatible. Verify the package drawing, pin numbering, charge-pump capacitor connections, driver and receiver pin assignments, and control functions against the manufacturer datasheet. Also distinguish logic-side TX and RX from external driver-output and receiver-input pins; reversing these connections can place an RS-232 voltage level directly onto a microcontroller input.

Use a connector and cable strategy that controls ESD and conducted noise at the exposed RS-232 port. Add the appropriate external protection only after checking its capacitance and clamping behavior, since excessive capacitance can slow edge transitions at the operating data rate. Maintain a controlled ground connection between the equipment and connected host, and avoid long unprotected stubs near the connector.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The retrieved product and datasheet pages did not provide extractable compliance statements for this exact ordering code. Verify RoHS, REACH, lead-free, halogen-free, and conflict-mineral declarations with the manufacturer before regulatory submission.

Данные проверены: 2026-11-03 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

SP3232EUEA-L/TR datasheet SP3232EUEA-L/TR pinout SP3232EUEA-L/TR datasheet pdf SP3232EUEA-L/TR equivalent SP3232EUEA-L/TR replacement SP3232EUEA-L/TR cross reference SP3232EUEA-L/TR vs SP3223EUEA-L/TR SP3232EUEA-L/TR price SP3232EUEA-L/TR stock MaxLinear SP3232EUEA-L/TR SP3232EUEA-L/TR 16-SSOP SP3232EUEA-L/TR 1000 kbps SP3232EUEA-L/TR RS-232 interface what is SP3232EUEA-L/TR

Связанные компоненты & термины

MaxLinear SP3232EUEA-L/TR SP3232EU SP3223EUEA-L/TR SP3232EEA-L SP3232ECY-L/TR SP3232ECA-L/TR RS-232 RS-232 transceiver interface IC physical-layer transceiver logic-level translation charge-pump supply RS-232 driver RS-232 receiver 1000 kbps 3.3 V 16-SSOP SSOP family surface-mount package UART portable electronics industrial control instrument control network maintenance console
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ