SPC5602BK0CLH4 - 32-bit 48MHz 256KB Flash MCU | NXP
Артикул: SPC5602BK0CLH4 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.95 | $6,95 |
| 10 | $6.35 | $63,50 |
| 100 | $5.6 | $560,00 |
| 500 | $4.9 | $2.450,00 |
| 1.000 | $4.35 | $4.350,00 |
SPC5602BK0CLH4 Обзор
A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters. Within the power management hierarchy of embedded systems, the MCU sits at the top as the system brain, controlling sensors, actuators, and communication buses. The SPC5602BK0CLH4 belongs to NXP's (formerly Freescale) Qorivva MPC56xx / SPC5602B family, which was specifically engineered for automotive body electronics, gateway, and general-purpose control tasks.
Key features include the Power Architecture e200z0h core with fixed-point execution at up to 48 MHz, 256 KB of on-chip flash for code storage, and 24 KB of data RAM. The device integrates a 10-bit ADC for analog sensor acquisition, 45 general-purpose I/O lines, and automotive communication peripherals used in body control modules. Supply voltage operates from 3 V to 5 V, allowing direct connection to automotive 5 V sensor rails or 3.3 V logic domains.
Technically, the e200z0h is a compact, deterministic core derived from the PowerPC Book E architecture, valued in automotive designs for predictable interrupt latency and strong toolchain support through NXP's SPC5 Studio. The on-chip flash controller, clock generation, and low-voltage-detection supervision reduce external component count, supporting cost-sensitive body electronics platforms.
Typical applications include body control modules, door and seat control units, lighting control, HVAC controllers, gateway nodes, and industrial control systems that benefit from automotive-grade robustness and a 48 MHz deterministic core.
When designing with this device, verify that the full operating supply range (3 V to 5 V) and the -40C to +85C ambient range cover your worst-case conditions, and budget the 256 KB flash carefully, as body-control code bases grow quickly; larger variants in the family exist if headroom is needed.
This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and cross-reference the SPC5602BK0CLH4 with confidence.
Аналоги без доработки для SPC5602BK0CLH4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с SPC5602BK0CLH4 (тот же форм-фактор и посадочное место) — отличается по Series, Connectivity, Number of I/O, Operating Temperature, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
SPC5602BK0CLL4
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SPC5602BF2MLL6
✅ Прямая замена✓ В наличии
$5.59 / шт.
Открыть даташит →SPC5602BK0MLH4
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
SPC5553MVR132
✅ Прямая замена✓ В наличии
$61.25 / шт.
Открыть даташит →SPC5602BK0CLH4 Максимальные параметры и электрические характеристики
| Core Processor | e200z0h (Power Architecture) |
| Core Size | 32-bit |
| Максимальная тактовая частота | 48 MHz |
| Program Memory Size | 256 KB (256K x 8) Flash |
| Data RAM Size | 24 KB |
| Разрядность шины данных | 32 bit |
| ADC Resolution | 10 bit |
| Number of I/Os | 45 I/O |
| Рабочее напряжение питания | 3 V to 5 V |
| Minimum Operating Temperature | -40 C |
| Maximum Operating Temperature | +85 C |
| Способ монтажа | SMD/SMT |
| Корпус | 64-LQFP (10x10 mm) |
| Product Category | 32-bit Microcontrollers - MCU |
| Grade | Automotive Grade |
| Series | Qorivva MPC56xx / SPC5602B |
Руководство по цоколевке SPC5602BK0CLH4 в корпусе 64-lqfp (10x10 mm)
Цоколевка для SPC5602BK0CLH4 (корпус 64-lqfp (10x10 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для SPC5602BK0CLH4.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
SPC5602BK0CLH4 подходит для 6 применениеs: Body Control Module (BCM), Door and Seat Control Units, Automotive Gateway Nodes, Lighting Control Units, HVAC Control Modules, Industrial Control and Robotics I/O.
Body Control Module (BCM)
The SPC5602BK0CLH4 fits body control modules because its 48 MHz Power Architecture e200z0h core delivers deterministic real-time response for sequencing relays, lamps, and motors, while its 45 general-purpose I/O lines directly drive the many discrete loads a BCM manages. The 256 KB flash and 24 KB RAM are sufficient for CAN/LIN communication stacks and diagnostic services (UDS), and the 10-bit ADC reads battery sense, switch matrices, and analog load feedback without an external converter. Operating from a 3 V to 5 V supply and rated -40C to +85C, the part meets automotive-grade requirements for cabin-mounted electronics. Used as the central module controller, it typically reduces external component count through integrated supervision and clock generation, at the trade-off of careful flash budgeting as BCM feature sets grow.
Рекомендуется
Door and Seat Control Units
Door modules and seat control units benefit from the SPC5602BK0CLH4's combination of 45 I/O lines and a 10-bit ADC, which handle window lift motor H-bridge control inputs, mirror position potentiometers, and switch inputs on one chip. The 48 MHz e200z0h core executes PID control loops for soft-start and anti-pinch window algorithms with deterministic latency, a hallmark of the Power Architecture core family. Its 256 KB flash accommodates LIN and CAN drivers plus NXP's automotive software frameworks, and the -40C to +85C automotive-grade rating covers the door environment, where thermal cycling is severe even though absolute temperatures stay moderate. The 3 V to 5 V supply range lets the MCU share the vehicle's 5 V sensor rail, simplifying the local power tree compared with parts requiring strict 3.3 V or 5 V rails.
Рекомендуется
Automotive Gateway Nodes
Small gateway and protocol-conversion nodes use the SPC5602BK0CLH4's 48 MHz core to route frames between CAN channels and LIN buses with predictable latency, thanks to the deterministic e200z0h instruction execution. The 256 KB flash and 24 KB RAM provide headroom for two to three communication stacks plus gateway routing tables and diagnostic handlers in a device that remains cost-competitive against larger MPC56xx derivatives. NXP's SPC5 Studio toolchain and the Qorivva MPC56xx heritage give access to validated AUTOSAR-style drivers, shortening integration time. Rated -40C to +85C and powered from a 3 V to 5 V single rail, the MCU suits protected-zone mounting; the main trade-off is that high-throughput gateways aggregating many high-load CAN-FD channels should step up to larger SPC5 family parts with more RAM and dedicated CAN-FD controllers.
Рекомендуется
Lighting Control Units
Interior and exterior lighting controllers leverage the SPC5602BK0CLH4's 10-bit ADC for LED current and thermistor feedback, its PWM-capable timer resources for dimming curves, and its 48 MHz core for running fade and fault-management algorithms in real time. The 45 I/O lines directly interface to high-side driver ICs controlling headlamp, tail-lamp, and ambient lighting channels, while the -40C to +85C automotive grade rating satisfies under-dash and trunk environments. With 256 KB of flash, the device stores LIN-based lighting protocols and diagnostic routines commonly demanded by lighting suppliers. The 3 V to 5 V supply supports direct battery-sensed designs through a local regulator. Designers should allocate flash budget carefully if adaptive lighting features expand, or consider larger SPC560x family variants sharing the same Power Architecture software base.
Рекомендуется
HVAC Control Modules
HVAC controllers use the SPC5602BK0CLH4's 10-bit ADC to read cabin temperature sensors, blend-door position feedback, and pressure transducers, while timer-driven PWM outputs regulate blower motors and actuator positions through the 45 available I/O. The 48 MHz e200z0h core executes control loops for temperature regulation with the deterministic timing the Power Architecture core is known for, and its 256 KB flash holds LIN communication with the climate head unit plus actuator calibration data. Rated -40C to +85C, the device covers the HVAC controller's environment, and the 3 V to 5 V supply range matches typical automotive sensor rails, reducing external level-shifting. Compared with 8-bit alternatives, the 32-bit core and larger RAM allow more sophisticated airflow algorithms and richer diagnostics within a single- chip, automotive-grade solution.
Рекомендуется
Industrial Control and Robotics I/O
Beyond automotive, the SPC5602BK0CLH4 serves industrial control applications that value automotive-grade robustness: its -40C to +85C rating, wide 3 V to 5 V supply, and Power Architecture core heritage make it suitable for factory sensor hubs, motor-control supervisory nodes, and robotic end-effector controllers. The 48 MHz core provides ample throughput for state machines and Modbus/CAN-style fieldbus tasks within 256 KB flash, and the 10-bit ADC acquires analog process signals through the 45 I/O lines. Using an automotive-qualified part in industrial designs provides a documented reliability margin at modest cost premium. The main consideration is toolchain familiarity: teams accustomed to ARM-based industrial MCUs must adopt NXP's SPC5 Studio and Power Architecture tooling, so the part fits best where Qorivva software assets are already available or where the extended temperature robustness justifies the platform investment.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SPC5602BK0CLH4 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | SPC5602BK0CLL4 | SPC5602BF2MLL6 | SPC5602BK0MLH4 | SPC5553MVR132 |
|---|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | LQFP variant - verify pin map |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Clock | e200z0h, 48 MHz | e200z0h, 48 MHz | e200z0h, 48 MHz | e200z0h, 48 MHz | e200z3 (up to 132 MHz) |
| Flash Memory | 256 KB | 256 KB | 128 KB | 256 KB | 1.5 MB class |
| Automotive Grade | Yes | Yes | Yes | Yes | Yes (Qorivva) |
Ключевые отличия
- Compact 64-pin LQFP for body electronics (против SPC5553MVR132)
- Full 256 KB flash in the smallest SPC5602B footprint (против SPC5602BF2MLL6)
- Cost-efficient Power Architecture core (против SPC5746BSK1MKU2)
Заметки по проектированию
Power the SPC5602BK0CLH4 from a regulated 5 V or 3.3 V rail within its 3 V to 5 V specified range. In automotive modules, place a local LDO or pre-regulator ahead of the MCU and add 100 nF ceramic decoupling capacitors at each supply pin pair plus a bulk 4.7-10 uF capacitor near the package. Ensure brown-out handling: the device includes integrated low-voltage supervision, but verify reset threshold behavior against your supply's droop profile during crank transients (estimated: automotive 12 V rails can sag to 6 V during engine cranking).
For the 64-LQFP (10x10 mm, 0.5 mm pitch) footprint, follow standard QFP layout practice: place decoupling capacitors within 2-3 mm of supply pins, use short low-impedance return paths to ground, and route the crystal/clock traces away from switching loads. Provide at least two identical footprints consideration if dual-sourcing with SPC5602BK0CLL4 or SPC5602BK0MLH4 family variants, since these share the LQFP-64 land pattern and enable drop-in assembly flexibility without requalification of the PCB.
Verify the ordering suffix carefully when sourcing: NXP SPC5602B suffixes encode temperature grade and packing media, and mixing suffixes (e.g., CLL4 vs MLH4 temperature grades) can cause nonconformance in -40/+125C applications even though the parts are electrically similar. Also budget flash conservatively: at 256 KB, adding a full UDS diagnostic stack plus CAN/LIN stacks typically consumes a large fraction of memory, leaving limited margin for feature growth; prototype with a larger-memory family member if your roadmap is uncertain.
Информация о соответствии
Listed as Automotive Grade on NXP and Mouser product pages. RoHS status indicated by distributor comparison data; obtain formal RoHS/REACH declarations from NXP for certification purposes.