STM32L053R6T6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
部品番号: STM32L053R6T6 ✓ 生産中STM32L053R6T6 概要
An ultra-low-power microcontroller is a semiconductor designed to minimize both active and standby energy consumption. The STM32L0 product family belongs to the hierarchy of 32-bit embedded MCUs, general-purpose processors, and programmable semiconductor controllers. This makes the STM32L053R6T6 suitable for systems that must perform control, communications, sensing, and data acquisition while preserving strict battery-life targets.
Key characteristics include a 32 MHz ARM Cortex-M0+ core, 32 KB of Flash organized as 32K x 8, 8 KB of RAM, and USB 2.0 support that can operate without a crystal. The supported operating-voltage range is 1.65 V to 3.6 V, allowing deployment in industrial, consumer, medical-instrument, and embedded-control products. The 64-LQFP package also provides a generous pin count for external storage, sensors, displays, communications, and mixed-signal interfaces.
The STM32L053R6T6 uses a compact 32-bit RISC architecture optimized for energy-efficient embedded control. Its USB connectivity adds a practical peripheral function without requiring an external USB transceiver. The T6 ordering code identifies the temperature and packaging configuration, while the R6 designation corresponds to the 64-pin device with 32 KB of Flash. Designers should still validate clocking, bootloader, peripheral mapping, and firmware support for the exact board configuration before production release.
Typical uses include low-power USB data loggers, portable monitoring equipment, sensor-hub controllers, small human-machine interfaces, USB-connected industrial controls, and battery-operated accessories. USB 2.0 crystal-less operation can simplify clock-tree design, while the low-voltage supply range supports compact mixed-signal systems. The 64-pin package is particularly useful when the design needs both communications and a higher number of general-purpose I/O connections than smaller 48-pin variants provide.
The primary design consideration is supply and clock implementation. Keep the USB interface and high-speed signal routing electrically clean, provide the decoupling and reference components required by the selected USB implementation, and verify oscillator start-up and peripheral timing at the lowest intended input voltage. Confirm the final pin assignments and exposed thermal requirements against the manufacturer pinout and package drawings before routing the PCB.
ドロップイン代替品: STM32L053R6T6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32L053R6T6 (同一形状・フットプリント) — 相違点: Flash Memory, Product Type, Architecture.
STM32L053R8T6TR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32L073RBT6TR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32L052R6T6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32L051R6T6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32L071R6T6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
STM32L053R6T6 最大定格&電気的特性
| Product Type | 32-bit ultra-low-power ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 8 KB |
| Operating Voltage Range | 1.65 V to 3.6 V |
| Nominal Supply | 2.5 V / 3.3 V |
| CPU Architecture | ARM Cortex-M0+ |
| Instruction Width | 32 bit |
| USB Interface | USB 2.0 crystal-less |
| パッケージ | 64-LQFP (10 x 10 mm) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| ライフサイクル状態 | Active |
STM32L053R6T6 64-lqfp (10 x 10 mm) ピン配置ガイド
STM32L053R6T6 (64-lqfp (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L053R6T6.
詳細は データシート をご参照ください。
主な用途
STM32L053R6T6 の用途: 6 件s: USB-Connected Sensor Node, Portable Medical Monitor, Industrial Control Module, USB Data Logger, Compact Human-Machine Interface, Battery-Operated Accessory.
USB-Connected Sensor Node
The STM32L053R6T6 fits a compact USB sensor node because its 32 MHz ARM Cortex-M0+ core can acquire and process data while USB 2.0 crystal-less connectivity handles enumeration and data transfer. The 32 KB Flash and 8 KB RAM provide space for embedded firmware, USB descriptors, and control logic. Its 1.65 V to 3.6 V operating range also allows the MCU to share a compact supply with low-voltage sensors. Place USB routing away from sensitive analog paths and follow the manufacturer's reference configuration for decoupling and impedance control.
おすすめ
Portable Medical Monitor
The STM32L053R6T6 is appropriate for a portable monitoring unit that must combine low-power control, USB communications, and modest local data processing. Its ultra-low-power STM32L0 architecture supports battery-operated operation, while the Cortex-M0+ core handles sensor polling, filtering, status handling, and user-interface updates. USB 2.0 crystal-less connectivity can simplify synchronization with a host computer. For medical equipment, validate the exact device qualification, isolation strategy, leakage limits, alarm behavior, and applicable regulatory requirements independently of the MCU selection.
おすすめ
Industrial Control Module
The STM32L053R6T6 can serve as the central controller in a small industrial module that coordinates digital inputs, outputs, communications, and local diagnostics. Its 32 MHz Cortex-M0+ core provides deterministic handling of control logic, while the 64-LQFP package offers more connection options than smaller packages. The 1.65 V to 3.6 V supply range supports integration with low-voltage industrial peripherals. Use isolated interfaces where required, maintain defined failure states, and validate EMC and environmental performance for the enclosure and installation environment.
おすすめ
USB Data Logger
The STM32L053R6T6 is well suited to a USB data logger because it combines a compact 32-bit control core with 32 KB of Flash, 8 KB of RAM, and crystal-less USB 2.0. Firmware can collect samples, buffer records, maintain timestamps, and expose data through a USB device interface. The 64-LQFP package provides sufficient pins for status indicators, storage interfaces, and sensor inputs. Select external nonvolatile storage when retention exceeds the internal memory, and account for USB suspend behavior and logging throughput during firmware planning.
おすすめ
Compact Human-Machine Interface
The STM32L053R6T6 can control a compact human-machine interface with buttons, LEDs, a small display, and USB connectivity. The 32 MHz Cortex-M0+ core is capable of handling screen updates, input debouncing, status indication, and USB communication, while the 64-pin LQFP exposes a useful selection of I/O for display and control peripherals. Its low-voltage operation supports efficient portable designs. Validate display timing, contrast, ESD requirements, and connector protection against the specific module vendor's electrical recommendations.
おすすめ
Battery-Operated Accessory
The STM32L053R6T6 fits a battery-operated accessory that needs a low-power controller and optional USB charging or configuration connectivity. Its ultra-low-power STM32L0 architecture, 1.65 V minimum operating voltage, and crystal-less USB 2.0 support can reduce component count in compact designs. The MCU can manage button input, status LEDs, low-power sensing, and USB enumeration without a separate host controller. Validate the USB charging path independently, and confirm sleep-mode current and wake-up behavior on the complete assembled board.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32L053R6T6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32L053R8T6TR | STM32L073RBT6TR | STM32L052R6T6 | STM32L051R6T6 | STM32L071R6T6 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
主な差別化要因
- Crystal-less USB 2.0 connectivity in a 32 MHz low-power MCU (vs STM32L052R6T6)
- Exact 32 KB Flash configuration for cost-sensitive firmware budgets (vs STM32L053R8T6TR)
- 64-LQFP package provides a broad connection set (vs STM32L073RBT6TR)
- Native USB connectivity distinguishes the STM32L053 feature set (vs STM32L051R6T6)
設計ノート
Route USB D+ and D- as a controlled-impedance differential pair on the shortest practical path between the STM32L053R6T6 and connector. Keep the pair over a continuous ground reference, avoid stubs and test-point branches, and place required USB routing components close to their relevant pins. Apply the impedance and clearance values required by the selected USB classification and manufacturing process.
Design the 1.65 V to 3.6 V supply rail for both low-noise analog behavior and USB transceiver requirements. Place the manufacturer's recommended bulk and high-frequency decoupling capacitors near the corresponding supply and ground pins, with short, low-inductance connections. Verify startup behavior across the complete voltage range and confirm that USB signaling remains within its specified limits under load and bus idle conditions.
Do not treat a same-package STM32L0 device as an automatic substitute. The STM32L053R8T6TR and STM32L073RBT6TR provide different memory configurations, while STM32L052R6T6 and STM32L051R6T6 do not provide the same USB feature set. Compare every pin, peripheral mapping, interrupt vector, bootloader behavior, clock requirement, and package marking before approving a replacement.
Although the STM32L053R6T6 is designed for low-power operation, the switching loss of the core and USB activity increases with clock frequency and duty cycle. Use the manufacturer power-consumption data when estimating battery life, and measure sleep current on the assembled design because leakage from regulators, pull resistors, LEDs, sensors, and USB protection devices may dominate standby consumption.
コンプライアンス情報
RoHS compliance is stated in the manufacturer and distributor product information. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.