SY89429VZC - 400MHz Programmable Clock Synthesizer | Microchip
Артикул: SY89429VZC ✗ Снят с производстваSY89429VZC Обзор
A frequency synthesizer is a clock-and-timing IC that generates a stable, programmable output frequency from a reference source. Clock generators and phase-locked-loop synthesizers are part of the broader Clock & Timing family within integrated circuits and power-management ecosystems. The SY89429VZC is intended for systems requiring programmable clocks, multiple output formats, or centralized timing distribution across high-speed digital logic.
The main features of the SY89429VZC include support for both 3.3V and 5V power-supply options, differential PECL outputs to 400MHz, and low output jitter specified at ±25ps peak-to-peak. Its synthesized architecture helps provide programmable frequency generation, while the internal quartz reference supports autonomous clock generation. A serial 3-wire control path permits configuration from a host processor, and the parallel interface provides an alternative configuration path during power-on.
The internal VCO operates from 400MHz to 800MHz, allowing the output frequency range to extend to 400MHz according to the product description. The differential PECL output arrangement is useful where a high-speed clock must be transferred through a PCB or short-distance interconnect with appropriate termination. The synthesizer architecture separates frequency programming from a fixed local oscillator, making the device suitable for clocks that need adjustable rates rather than a single predetermined frequency.
Typical uses include workstation and graphics pixel-clock generation, processor-based timing systems, communications equipment, and high-speed digital logic requiring a programmable differential clock. The part can also be used in networking equipment, test systems, and embedded platforms where a system clock must be adjusted according to operating mode or external reference conditions. Differential PECL outputs are particularly appropriate for clock distribution over controlled interconnects when the receiver and board characteristics are accounted for.
Designers should verify the required output frequency, supply voltage, interface timing, and output termination before finalizing a board layout. PECL outputs require correct biasing and signal-referenced termination in accordance with the manufacturer application guidance. The 28-SOIC footprint also requires adequate spacing for power and ground connections, with careful routing intended to reduce clock distortion and crosstalk. The manufacturer datasheet is the controlling reference for pin assignments, programming sequences, and electrical limits.
This product page combines the key SY89429VZC specifications, source links, interface details, and design considerations to support faster engineering review. It emphasizes the distinctions that matter when evaluating a programmable clock synthesizer: supply compatibility, synthesis range, jitter, control interfaces, output standard, and package constraints.
Аналоги без доработки для SY89429VZC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
SY89429VZC-TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SY89429VZC Характеристики
| Device Type | Programmable frequency synthesizer clock generator |
| Manufacturer | Microchip Technology |
| Supply Voltage Options | 3.3 V or 5 V |
| Output Frequency Range | 25 MHz to 400 MHz |
| Internal VCO Frequency Range | 400 MHz to 800 MHz |
| Maximum Output Frequency | 400 MHz |
| Output Standard | Differential PECL |
| Output Jitter | ±25 ps peak-to-peak |
| Serial Control Interface | 3-wire serial interface |
| Power-On Configuration Interface | Parallel interface |
| Reference Source | Internal quartz reference |
| Architecture | Synthesized clock architecture |
| Корпус | 28-SOIC, 7.50 mm width |
| Тип монтажа | Surface mount |
Руководство по цоколевке SY89429VZC в корпусе 28-soic, 7.50 mm width
Цоколевка для SY89429VZC (корпус 28-soic, 7.50 mm width). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для SY89429VZC.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
SY89429VZC подходит для 6 применениеs: Graphics Pixel-Clock Generation, Processor-Based Clock Distribution, Communications Equipment Timing, Workstation Timing Systems, High-Speed Digital Logic Clocks, Test and Measurement Equipment.
Graphics Pixel-Clock Generation
The SY89429VZC fits graphics pixel-clock generation because it synthesizes programmable frequencies from 25 MHz to 400 MHz and supports differential PECL outputs. Its internal VCO operates from 400 MHz to 800 MHz, while the serial 3-wire interface allows the operating mode to change according to graphics workload or display timing requirements. The parallel power-on interface provides an additional initialization route. In a graphics system, the synthesizer can supply a controlled clock to high-speed digital logic, but the design must include the correct output reference, termination, trace routing, and decoupling recommended by the manufacturer.
Рекомендуется
Processor-Based Clock Distribution
The SY89429VZC is appropriate for processor-based systems that need a configurable clock source for high-speed logic, graphics, memory, or communication subsystems. Its 25 MHz to 400 MHz programmable output range supports multiple operating states without replacing the clock device, while the internal quartz reference allows autonomous generation. Differential PECL outputs can drive appropriately terminated receiver circuits over controlled interconnects. The key engineering consideration is keeping clock traces short and impedance-controlled, separating clocks from noisy switching paths, and confirming that the selected supply voltage matches both the device and output-reference arrangement.
Рекомендуется
Communications Equipment Timing
The SY89429VZC can provide programmable timing for communications equipment whose internal subsystems require a selectable differential clock. The 400 MHz maximum output frequency and ±25ps peak-to-peak jitter specification are relevant to high-speed signal chains, while the synthesized architecture allows the operating rate to follow system modes. The 3.3V or 5V supply options also support different board architectures. For communications designs, place the device close to the clock-consuming circuits, use controlled differential routing, validate return-path continuity, and include output termination that matches the receiving interface and board environment.
Рекомендуется
Workstation Timing Systems
The SY89429VZC is identified for workstation and other processor-based applications requiring flexible clock generation. Its internal quartz reference, programmable synthesis range, serial control interface, and differential PECL outputs allow a workstation timing subsystem to support several clock rates while retaining a centralized control path. This is valuable when processor, display, storage-interface, or communications blocks need related but independently adjustable clocks. The implementation should account for startup behavior, supply sequencing, clock-output enable procedures, and receiver compatibility. PCB placement should minimize clock-to-data crosstalk and provide continuous reference and ground planes beneath high-speed clock routes.
Рекомендуется
High-Speed Digital Logic Clocks
The SY89429VZC fits clock-generation requirements in high-speed digital logic because it combines programmable synthesis, differential PECL outputs, and a jitter specification of ±25ps peak-to-peak. The 25 MHz to 400 MHz output range covers clock domains that would otherwise require multiple fixed-frequency sources. A host can use the serial 3-wire interface to set the operating frequency, while the parallel interface offers a power-on configuration path. For reliable operation, maintain continuous supply and ground planes, use the manufacturer-recommended decoupling network, avoid routing the clock across split planes, and verify the complete output eye and timing margin at the receiver.
Рекомендуется
Test and Measurement Equipment
The SY89429VZC can serve as a programmable clock source in test and measurement equipment where the DUT, serializer, converter, or digital subsystem must operate at a selected rate. The synthesized output range of 25 MHz to 400 MHz permits repeatable configuration across test modes, and the internal reference supports standalone operation. Differential PECL outputs are suitable for controlled test fixtures when termination and signal references are designed correctly. Engineers should characterize output jitter, duty-cycle distortion, rise and fall times, and return loss at the intended operating point. They should also account for fixture loading and cable delay so that timing measurements remain attributable to the device under test.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SY89429VZC — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | SY89429VZC-TR |
|---|---|---|
| Package | 28-SOIC, 7.50 mm width | 28-SOIC |
| Brand | Microchip Technology | Microchip Technology |
| Device Type | Programmable frequency synthesizer clock generator | SY89429V family frequency synthesizer |
| Supply Voltage Options | 3.3 V or 5 V | 3.3 V or 5 V |
| Output Frequency Range | 25 MHz to 400 MHz | 25 MHz to 400 MHz |
| Internal VCO Range | 400 MHz to 800 MHz | 400 MHz to 800 MHz |
| Output Standard | Differential PECL | Differential PECL |
| Output Jitter | ±25 ps peak-to-peak | ±25 ps peak-to-peak |
| Control Interface | 3-wire serial interface and parallel power-on interface | 3-wire serial interface and parallel power-on interface |
| Reference Source | Internal quartz reference | Internal quartz reference |
Ключевые отличия
- Broad programmable clock range (против SY89429VZC-TR)
- Differential high-speed output (против SY89429VZC-TR)
- Flexible supply and configuration support (против SY89429VZC-TR)
Заметки по проектированию
Treat the differential PECL clock as a high-speed point-to-point interface. Use matched routing, a continuous reference plane, and the termination arrangement specified for the receiving circuit. Keep clock traces away from switching nodes and noisy power-regulator returns. Because the outputs can operate to 400 MHz, route each differential pair as a continuous pair with consistent geometry and avoid unnecessary test-point stubs that add discontinuity.
Place the SY89429VZC close to the circuits that consume the clock to minimize trace length and propagation-delay variation. Provide local supply and ground connections at the device, follow the manufacturer’s decoupling recommendations, and preserve an uninterrupted return path beneath clock traces. Leave the programming interface accessible during bring-up so that the serial or parallel configuration path can be checked before the clock is distributed across the board.
Do not treat the 800 MHz internal VCO limit as an 800 MHz output specification: the listed synthesized output range is 25 MHz to 400 MHz. Also confirm the supply-voltage option, output-reference arrangement, and PECL termination before fabrication. Verify startup programming, output enable behavior, and reference stability with the intended system controller because incorrect configuration can leave the clock unavailable even when the supply rails are correct.
Информация о соответствии
Compliance status was not stated in the available product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations with Microchip Technology for the exact orderable suffix.