Microchip Technology

SY89429VZC - 400MHz Programmable Clock Synthesizer | Microchip

부품 번호: SY89429VZC ✗ 단종
3.3 V or 5 V Vdss 28-SOIC, 7.50 mm width Package 25 MHz to 400 MHz Speed
MOQ: 1 |

SY89429VZC 개요

The Microchip SY89429VZC is a programmable frequency synthesizer clock generator operating from a 5V or 3.3V supply, with an internal VCO covering 400MHz to 800MHz and output frequency synthesis from 25MHz to 400MHz. The device provides differential PECL outputs, a serial 3-wire interface, a parallel interface for power-on operation, and an internal quartz reference. It is packaged in a 28-SOIC package measuring 7.50mm wide.

A frequency synthesizer is a clock-and-timing IC that generates a stable, programmable output frequency from a reference source. Clock generators and phase-locked-loop synthesizers are part of the broader Clock & Timing family within integrated circuits and power-management ecosystems. The SY89429VZC is intended for systems requiring programmable clocks, multiple output formats, or centralized timing distribution across high-speed digital logic.

The main features of the SY89429VZC include support for both 3.3V and 5V power-supply options, differential PECL outputs to 400MHz, and low output jitter specified at ±25ps peak-to-peak. Its synthesized architecture helps provide programmable frequency generation, while the internal quartz reference supports autonomous clock generation. A serial 3-wire control path permits configuration from a host processor, and the parallel interface provides an alternative configuration path during power-on.

The internal VCO operates from 400MHz to 800MHz, allowing the output frequency range to extend to 400MHz according to the product description. The differential PECL output arrangement is useful where a high-speed clock must be transferred through a PCB or short-distance interconnect with appropriate termination. The synthesizer architecture separates frequency programming from a fixed local oscillator, making the device suitable for clocks that need adjustable rates rather than a single predetermined frequency.

Typical uses include workstation and graphics pixel-clock generation, processor-based timing systems, communications equipment, and high-speed digital logic requiring a programmable differential clock. The part can also be used in networking equipment, test systems, and embedded platforms where a system clock must be adjusted according to operating mode or external reference conditions. Differential PECL outputs are particularly appropriate for clock distribution over controlled interconnects when the receiver and board characteristics are accounted for.

Designers should verify the required output frequency, supply voltage, interface timing, and output termination before finalizing a board layout. PECL outputs require correct biasing and signal-referenced termination in accordance with the manufacturer application guidance. The 28-SOIC footprint also requires adequate spacing for power and ground connections, with careful routing intended to reduce clock distortion and crosstalk. The manufacturer datasheet is the controlling reference for pin assignments, programming sequences, and electrical limits.

This product page combines the key SY89429VZC specifications, source links, interface details, and design considerations to support faster engineering review. It emphasizes the distinctions that matter when evaluating a programmable clock synthesizer: supply compatibility, synthesis range, jitter, control interfaces, output standard, and package constraints.

드롭인 대체품: SY89429VZC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

SY89429VZC-TR

✅ 드롭인
📦 28-SOIC
Same SY89429V family and 28-SOIC format; suffix indicates a different orderable configuration, with no quantified electrical difference stated

📋 참조 대체품 (카탈로그에 없음)

SY89429VZC 사양

Device Type Programmable frequency synthesizer clock generator
Manufacturer Microchip Technology
Supply Voltage Options 3.3 V or 5 V
Output Frequency Range 25 MHz to 400 MHz
Internal VCO Frequency Range 400 MHz to 800 MHz
Maximum Output Frequency 400 MHz
Output Standard Differential PECL
Output Jitter ±25 ps peak-to-peak
Serial Control Interface 3-wire serial interface
Power-On Configuration Interface Parallel interface
Reference Source Internal quartz reference
Architecture Synthesized clock architecture
패키지 28-SOIC, 7.50 mm width
실장 유형 Surface mount

SY89429VZC 28-soic, 7.50 mm width 핀 구성 가이드

SY89429VZC(28-soic, 7.50 mm width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

SY89429VZC의 28-soic, 7.50 mm width 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: SY89429VZC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

SY89429VZC 적합 용도: 6 애플리케이션s: Graphics Pixel-Clock Generation, Processor-Based Clock Distribution, Communications Equipment Timing, Workstation Timing Systems, High-Speed Digital Logic Clocks, Test and Measurement Equipment.

📺

Graphics Pixel-Clock Generation

The SY89429VZC fits graphics pixel-clock generation because it synthesizes programmable frequencies from 25 MHz to 400 MHz and supports differential PECL outputs. Its internal VCO operates from 400 MHz to 800 MHz, while the serial 3-wire interface allows the operating mode to change according to graphics workload or display timing requirements. The parallel power-on interface provides an additional initialization route. In a graphics system, the synthesizer can supply a controlled clock to high-speed digital logic, but the design must include the correct output reference, termination, trace routing, and decoupling recommended by the manufacturer.

🖥️

Processor-Based Clock Distribution

The SY89429VZC is appropriate for processor-based systems that need a configurable clock source for high-speed logic, graphics, memory, or communication subsystems. Its 25 MHz to 400 MHz programmable output range supports multiple operating states without replacing the clock device, while the internal quartz reference allows autonomous generation. Differential PECL outputs can drive appropriately terminated receiver circuits over controlled interconnects. The key engineering consideration is keeping clock traces short and impedance-controlled, separating clocks from noisy switching paths, and confirming that the selected supply voltage matches both the device and output-reference arrangement.

🌐

Communications Equipment Timing

The SY89429VZC can provide programmable timing for communications equipment whose internal subsystems require a selectable differential clock. The 400 MHz maximum output frequency and ±25ps peak-to-peak jitter specification are relevant to high-speed signal chains, while the synthesized architecture allows the operating rate to follow system modes. The 3.3V or 5V supply options also support different board architectures. For communications designs, place the device close to the clock-consuming circuits, use controlled differential routing, validate return-path continuity, and include output termination that matches the receiving interface and board environment.

🖥️

Workstation Timing Systems

The SY89429VZC is identified for workstation and other processor-based applications requiring flexible clock generation. Its internal quartz reference, programmable synthesis range, serial control interface, and differential PECL outputs allow a workstation timing subsystem to support several clock rates while retaining a centralized control path. This is valuable when processor, display, storage-interface, or communications blocks need related but independently adjustable clocks. The implementation should account for startup behavior, supply sequencing, clock-output enable procedures, and receiver compatibility. PCB placement should minimize clock-to-data crosstalk and provide continuous reference and ground planes beneath high-speed clock routes.

⚡

High-Speed Digital Logic Clocks

The SY89429VZC fits clock-generation requirements in high-speed digital logic because it combines programmable synthesis, differential PECL outputs, and a jitter specification of ±25ps peak-to-peak. The 25 MHz to 400 MHz output range covers clock domains that would otherwise require multiple fixed-frequency sources. A host can use the serial 3-wire interface to set the operating frequency, while the parallel interface offers a power-on configuration path. For reliable operation, maintain continuous supply and ground planes, use the manufacturer-recommended decoupling network, avoid routing the clock across split planes, and verify the complete output eye and timing margin at the receiver.

🔧

Test and Measurement Equipment

The SY89429VZC can serve as a programmable clock source in test and measurement equipment where the DUT, serializer, converter, or digital subsystem must operate at a selected rate. The synthesized output range of 25 MHz to 400 MHz permits repeatable configuration across test modes, and the internal reference supports standalone operation. Differential PECL outputs are suitable for controlled test fixtures when termination and signal references are designed correctly. Engineers should characterize output jitter, duty-cycle distortion, rise and fall times, and return loss at the intended operating point. They should also account for fixture loading and cable delay so that timing measurements remain attributable to the device under test.

What is the operating frequency range of the SY89429VZC?
The SY89429VZC synthesizes output frequencies from 25 MHz to 400 MHz. According to the Micrel Semiconductor product description, its internal voltage-controlled oscillator operates from 400 MHz to 800 MHz, while the programmable output range extends to 400 MHz. This distinction matters when designing a PLL loop because the VCO range and the delivered output range describe different parts of the frequency architecture.
What type of clock generator is the SY89429VZC?
The SY89429VZC is a programmable frequency synthesizer clock generator based on a synthesized architecture. It provides 5V and 3.3V supply options, differential PECL outputs, a serial 3-wire interface, a parallel interface for power-on configuration, and an internal quartz reference. These features place it in the Clock & Timing category for systems requiring adjustable clock generation rather than a fixed-frequency oscillator.
Which output standard and jitter does the SY89429VZC use?
The SY89429VZC uses differential PECL outputs and is specified with ±25ps peak-to-peak output jitter. The Micrel Semiconductor product listing identifies the differential output capability and the jitter figure for operation to 400 MHz. Differential PECL is useful for high-speed clock distribution, but the receiver, termination network, trace geometry, and supply references must be designed according to the manufacturer interface guidance.
Where can I download the SY89429VZC datasheet PDF?
The SY89429VZC datasheet and product documentation can be found through the Micrel Semiconductor and Microchip Technology document links listed on this page. The available documentation identifies the part as a 5V/3.3V programmable frequency synthesizer with a 25 MHz to 400 MHz output range, differential PECL outputs, and an internal quartz reference. Use the manufacturer datasheet for the definitive pinout, electrical characteristics, and programming procedure.
Where is the SY89429VZC pinout located?
The SY89429VZC pinout is documented in the manufacturer datasheet under the 28-SOIC pin-description and package-information sections. The device is identified as a 28-SOIC frequency synthesizer with 7.50mm package width, but a complete numbered pin list is not published in the product summary shown here. Use the datasheet pin-description table when assigning nets, particularly for supply, ground, reference, control, and differential clock outputs.
What can replace the SY89429VZC?
The verified SY89429VZC replacement listing is the SY89429VZC-TR from Microchip Technology. It identifies the same 28-SOIC SY89429V frequency-synthesizer family and is the only directly corresponding orderable variant located in the available cross-reference information. A PCB replacement should be checked against the exact package, suffix, temperature rating, programming interface, and electrical characteristics before substitution.
Is the SY89429VZC-TR a drop-in replacement for SY89429VZC?
The SY89429VZC-TR is the closest verified drop-in candidate for the SY89429VZC because it is the same Microchip SY89429V family and is listed in a 28-SOIC configuration. The suffix difference generally identifies the shipment or carrier format, but production designs should confirm the package marking and ordering information in the manufacturer datasheet. Final qualification must also verify the electrical limits and programming sequence.
What is the best Microchip equivalent for the SY89429VZC?
The best verified Microchip equivalent is the SY89429VZC-TR, which uses the same SY89429V frequency-synthesizer family and is listed in a 28-SOIC package. It provides the closest starting point for an engineering cross-reference because the core device family, package format, and target function align. Always compare the exact suffix, supply requirements, clock-output configuration, reference interface, and lifecycle status before approving it as a replacement.
Is the SY89429VZC suitable for graphics pixel clocks?
The SY89429VZC is suitable for programmable graphics pixel-clock applications. The Micrel Semiconductor documentation identifies workstations, graphics pixel clocks, and other processor-based systems as application areas, while the device supports output synthesis from 25 MHz to 400 MHz with differential PECL outputs. Confirm the required pixel-clock rate, reference input arrangement, interface timing, and output termination before implementation.
When should I choose the SY89429VZC over a fixed-frequency oscillator?
Choose the SY89429VZC when the clock rate must be programmed rather than fixed in hardware. Its synthesized architecture, 25 MHz to 400 MHz output range, internal VCO, serial 3-wire interface, parallel power-on interface, and internal quartz reference provide more control than a simple fixed-frequency oscillator. A fixed-frequency oscillator may be preferable when maximum simplicity, minimum circuitry, or very low cost is more important than programmability.
SY89429VZC vs SY89429VZC-TR: which part should I select?
The SY89429VZC and SY89429VZC-TR are both identified as members of the same Microchip SY89429V family in 28-SOIC packages. The available cross-reference information identifies the -TR part as the closest verified drop-in candidate. Selection should therefore focus on the exact orderable suffix, carrier format, lifecycle status, and the manufacturer ordering information rather than assuming a functional difference.
How should the differential PECL outputs be terminated?
The SY89429VZC differential PECL outputs must be terminated according to the manufacturer’s output-interface requirements and the receiving circuit’s input structure. The differential outputs operate up to 400 MHz, so trace length, impedance, reference voltage, return path, and termination placement can materially affect signal integrity. Review the datasheet output characteristics and recommended application circuit before finalizing the PCB.
What are the key SY89429VZC specifications engineers should know?
The key SY89429VZC specifications are a 25 MHz to 400 MHz programmable output range, a 400 MHz to 800 MHz internal VCO range, 3.3V or 5V supply options, differential PECL outputs, ±25ps peak-to-peak jitter, a serial 3-wire interface, a parallel power-on interface, and an internal quartz reference. The device uses a 28-SOIC package measuring 7.50mm wide and is categorized as a programmable frequency synthesizer.
Where can I buy the SY89429VZC and check its lead time?
Use the Request a Quote form on this page to ask for SY89429VZC availability, current lead time, minimum order quantity, and package quantity. The product is listed as an orderable frequency synthesizer, but stock and lead time can vary with procurement volume and market conditions. The quote form provides a direct purchasing path without publishing potentially stale commercial terms.
What is the price of the SY89429VZC?
Current commercial terms for the SY89429VZC should be requested through the Request a Quote form on this page. The available listings identify the exact MPN and its 28-SOIC package but do not provide a qualifying quantity-break price table for extraction. The quote workflow allows the unit price, volume tiers, packaging, and available delivery options to be matched to the requested order.

엔지니어링 참조 데이터: SY89429VZC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the SY89429VZC when a design needs a programmable clock from 25 MHz to 400 MHz with differential PECL outputs and an internal reference. Its 3.3V or 5V operation, 3-wire serial control, and parallel power-on interface make it appropriate for processor, graphics, communications, and test systems where the operating rate may change. The SY89429VZC-TR is the closest verified family alternative when the same 28-SOIC device is required in its alternative orderable configuration. Because no other pin-compatible cross-reference candidate was identified, engineers should not substitute a similarly described clock generator without checking pin assignments, programming behavior, reference requirements, output levels, jitter, and supply sequencing. For designs that do not require programmable frequency or differential PECL outputs, a simpler fixed-frequency clock may reduce circuitry and design effort.

대체품과의 비교

파라미터 이 제품 SY89429VZC-TR
Package 28-SOIC, 7.50 mm width 28-SOIC
Brand Microchip Technology Microchip Technology
Device Type Programmable frequency synthesizer clock generator SY89429V family frequency synthesizer
Supply Voltage Options 3.3 V or 5 V 3.3 V or 5 V
Output Frequency Range 25 MHz to 400 MHz 25 MHz to 400 MHz
Internal VCO Range 400 MHz to 800 MHz 400 MHz to 800 MHz
Output Standard Differential PECL Differential PECL
Output Jitter ±25 ps peak-to-peak ±25 ps peak-to-peak
Control Interface 3-wire serial interface and parallel power-on interface 3-wire serial interface and parallel power-on interface
Reference Source Internal quartz reference Internal quartz reference

주요 차별점

  • Broad programmable clock range (vs SY89429VZC-TR)
  • Differential high-speed output (vs SY89429VZC-TR)
  • Flexible supply and configuration support (vs SY89429VZC-TR)

설계 노트

Treat the differential PECL clock as a high-speed point-to-point interface. Use matched routing, a continuous reference plane, and the termination arrangement specified for the receiving circuit. Keep clock traces away from switching nodes and noisy power-regulator returns. Because the outputs can operate to 400 MHz, route each differential pair as a continuous pair with consistent geometry and avoid unnecessary test-point stubs that add discontinuity.

Place the SY89429VZC close to the circuits that consume the clock to minimize trace length and propagation-delay variation. Provide local supply and ground connections at the device, follow the manufacturer’s decoupling recommendations, and preserve an uninterrupted return path beneath clock traces. Leave the programming interface accessible during bring-up so that the serial or parallel configuration path can be checked before the clock is distributed across the board.

Do not treat the 800 MHz internal VCO limit as an 800 MHz output specification: the listed synthesized output range is 25 MHz to 400 MHz. Also confirm the supply-voltage option, output-reference arrangement, and PECL termination before fabrication. Verify startup programming, output enable behavior, and reference stability with the intended system controller because incorrect configuration can leave the clock unavailable even when the supply rails are correct.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance status was not stated in the available product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations with Microchip Technology for the exact orderable suffix.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

SY89429VZC datasheet SY89429VZC pinout SY89429VZC datasheet pdf SY89429VZC equivalent SY89429VZC replacement SY89429VZC cross reference SY89429VZC vs SY89429VZC-TR SY89429VZC price SY89429VZC stock Microchip SY89429VZC SY89429VZC 28-SOIC pinout SY89429VZC application circuit

관련 부품 & 용어

Microchip Technology Micrel Semiconductor SY89429VZC SY89429VZC-TR programmable frequency synthesizer clock generator phase-locked loop PLL voltage-controlled oscillator VCO differential PECL output output jitter serial 3-wire interface parallel interface internal quartz reference Clock & Timing integrated circuit 28-SOIC SOIC surface mount SMD 3.3 V power supply 5 V power supply graphics pixel clock processor-based timing system
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기