Texas Instruments

TAS5012IPFB - 2-Channel 24-Bit Audio Processor | Texas Instruments

Артикул: TAS5012IPFB ✗ Снят с производства
3 V to 3.6 V Vdss 48-pin TQFP, 7 mm x 7 mm Package
MOQ: 1 |

TAS5012IPFB Обзор

The Texas Instruments TAS5012IPFB is a 2-channel true digital audio amplifier signal processor with 24-bit PCM input, 102 dB dynamic range, and PWM audio output, housed in a 48-pin TQFP surface-mount package. It operates from a 3 V to 3.6 V supply and accepts audio data at sampling rates up to 192 kHz.

A true digital audio amplifier, or TDAA, divides an audio system into a digital signal-processing stage and a separate power-output stage. The TAS5012IPFB performs the digital portion by accepting an I2S-compatible PCM stream, processing two audio channels, and generating a 3.3 V PWM output stream. A companion power stage such as the TAS5110 converts that PWM stream into a filtered analog audio output. This architecture separates digital signal handling from power amplification.

The processor supports 24-bit input data at 176.4 kHz and 192 kHz sampling rates. Its specified dynamic range is 102 dB, while total harmonic distortion plus noise is less than 0.06%. The associated system can achieve 90% power efficiency into an 8-ohm load. These characteristics suit compact, high-fidelity audio products where a digital signal path improves channel matching and leaves final power amplification to a dedicated PWM driver.

TAS5012IPFB uses a DSP-oriented interface and converts serial PCM audio into a differential, self-modulating PWM signal suitable for a true digital audio amplifier architecture. The 3 V to 3.6 V operating range supports a conventional low-voltage digital audio subsystem. Because the IC does not directly drive loudspeakers, system-level output power depends on the selected PWM power device, filter network, supply capability, and speaker impedance.

Typical uses include powered speakers, wireless speaker systems, compact stereo products, audio docking stations, home-theater equipment, and automotive audio head units. The processor can also serve digital crossover or multi-channel designs where its two independent PCM channels feed compatible PWM output stages. Its 48-pin TQFP package provides adequate routing density for clock, serial-data, control, and PWM connections without requiring a fine-pitch BGA.

The primary design consideration is interface and power-stage matching. The selected PWM amplifier must accept the TAS5012 differential output, support the intended sampling rate, and meet the required output-power and filter design. PCB layout should isolate sensitive clock and I2S signals from the switching node and output-filter region, while decoupling should be placed directly at the supply pins.

This page combines the device specifications, lifecycle status, documented functional relationships, practical application guidance, and verified drop-in alternatives. It is intended to help engineers locate the datasheet, understand the digital audio architecture, evaluate replacement options, and plan a reliable PCB layout without treating the obsolete status as evidence of a modern drop-in replacement.

Аналоги без доработки для TAS5012IPFB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с TAS5012IPFB (тот же форм-фактор и посадочное место) — отличается по Operating Temperature Range, Package, System Power Efficiency.

Texas Instruments
Operating Temperature Range: 0 °C to 70 °C
Package: 48-TQFP, 7 mm x 7 mm
System Power Efficiency: 90% into an 8 ohm load
Сравнить с TAS5012IPFB →

TAS5012PFBRG4

✅ Прямая замена
📦 48-pin TQFP (7 mm x 7 mm)
Core specifications match at 0 dB difference for 102 dB dynamic range, while the ordering suffix and qualification details differ

📋 Справочный аналог (нет в каталоге)

TAS5012IPFBG4

✅ Прямая замена
📦 48-pin TQFP (7 mm x 7 mm)
Electrical performance is unchanged at 0 dB difference, with a different orderable suffix and green-compatible assembly designation

📋 Справочный аналог (нет в каталоге)

TAS5012IPFB Максимальные параметры и электрические характеристики

Product Type True digital audio amplifier signal processor
Number of Channels 2 channels
Dynamic Range 102 dB
Total Harmonic Distortion Plus Noise < 0.06%
System Power Efficiency 90% into an 8-ohm load
Input Word Length 24 bits
Maximum Stated Sampling Rate 192 kHz
Supported High-Rate Sampling 176.4 kHz and 192 kHz
Supply Voltage Range 3 V to 3.6 V
Digital Audio Interface I2S
Internal Processing DSP
Тип выхода 3.3 V PWM audio stream
Корпус 48-pin TQFP, 7 mm x 7 mm
Тип монтажа Surface mount
Диапазон рабочих температур 0 °C to 70 °C ambient
Product Status Obsolete

Руководство по цоколевке TAS5012IPFB в корпусе 48-pin tqfp, 7 mm x 7 mm

Цоколевка для TAS5012IPFB (корпус 48-pin tqfp, 7 mm x 7 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 48-pin tqfp, 7 mm x 7 mm для TAS5012IPFB

Нет подробных данных о распиновке для TAS5012IPFB.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TAS5012IPFB подходит для 6 применениеs: Powered Speaker System, Wireless Speaker, Automotive Audio Head Unit, Audio Docking Station, Home Theater Stereo Output, Digital Speaker Development Platform.

🎧

Powered Speaker System

The TAS5012IPFB fits a two-channel powered-speaker design because it accepts 24-bit I2S audio, processes two channels, and generates a 3.3 V differential PWM stream. The processor's 102 dB dynamic range and THD+N below 0.06% preserve the numerical advantage of a digital audio path. In the finished amplifier, a compatible PWM power device drives the 8-ohm speaker, while the documented system efficiency can reach 90%. The primary design constraint is synchronization between the TAS5012 modulation signals and the external power stage.

📱

Wireless Speaker

The TAS5012IPFB is appropriate for the digital output stage of a wireless speaker after a network or Bluetooth audio source produces a PCM stream. Its I2S interface and 24-bit input word length support high-resolution sources, while 176.4 kHz and 192 kHz operation covers high-rate content. The 3 V to 3.6 V supply suits a compact digital subsystem, and the 48-pin TQFP leaves accessible routing for clocks, serial data, control signals, and differential PWM outputs. Wireless-radio integration remains outside this device's function.

🚗

Automotive Audio Head Unit

The TAS5012IPFB can serve the digital audio path in an automotive head unit when the system supplies compatible 24-bit I2S data and the design satisfies environmental qualification requirements. Its 2-channel architecture supports stereo content, 102 dB dynamic range, and THD+N below 0.06%, while the external PWM power stage keeps loudspeaker drive current out of the processor. Because the published ambient range is 0 °C to 70 °C, vehicle temperature extremes, load transients, vibration, and EMC requirements must be validated separately before release.

🔊

Audio Docking Station

The TAS5012IPFB is suitable for a compact docking station that accepts digital audio from a host processor and delivers it to a pair of powered speakers. The I2S input avoids an analog input stage at the processor boundary, while the 2-channel capability matches conventional stereo playback. Its 3 V to 3.6 V operating range simplifies integration with a 3.3 V digital domain, and the 102 dB dynamic range provides headroom for high-quality source material. Mechanical stability and EMI performance depend on the external power stage and filter layout.

📺

Home Theater Stereo Output

The TAS5012IPFB can implement a dedicated two-channel digital audio output for a home-theater system in which the source already supplies PCM data. The processor converts that stream into differential PWM signals for an external power amplifier, supporting 24-bit content at 176.4 kHz or 192 kHz. Its 102 dB dynamic range and THD+N below 0.06% are useful for preserving low-level detail, while the external power stage defines available loudspeaker power. Channel routing, sample-rate conversion, volume control, and source switching remain system-level functions.

🔧

Digital Speaker Development Platform

The TAS5012IPFB is useful in a development platform for evaluating a true digital audio signal chain because it separates digital modulation from loudspeaker power amplification. Engineers can feed 24-bit I2S data, inspect the differential PWM outputs, and connect a TAS5110-compatible power stage for an 8-ohm load. The documented combination of 102 dB dynamic range, THD+N below 0.06%, and 90% system efficiency provides concrete performance targets. Board prototyping must still address clocking, grounding, output filtering, and the power stage's switching layout.

Сводка рекомендуемых товаров

TAS5110 PWM power-output companion Используется в: Powered Speaker System, Wireless Speaker, Automotive Audio Head Unit, Audio Docking Station, Home Theater Stereo Output, Digital Speaker Development Platform TAS5012IPFB Texas Instruments Используется в: Powered Speaker System, Wireless Speaker, Automotive Audio Head Unit, Audio Docking Station, Home Theater Stereo Output, Digital Speaker Development Platform
What is the TAS5012IPFB?
The TAS5012IPFB is a Texas Instruments 2-channel digital audio PWM processor for true digital audio amplifier systems. It accepts a 24-bit I2S PCM stream and generates a 3.3 V PWM audio output for a companion power device such as the TAS5110. According to the Texas Instruments datasheet, the processor provides 102 dB dynamic range and is packaged in a 48-pin TQFP.
What are the key specifications of TAS5012IPFB that engineers should know?
The TAS5012IPFB combines 2-channel operation, 24-bit PCM input, a 3 V to 3.6 V supply, and PWM output in a 48-pin TQFP. According to the Texas Instruments datasheet, it supports 176.4 kHz and 192 kHz sampling, achieves 102 dB dynamic range, and has THD+N below 0.06%. The associated system is specified for 90% efficiency into an 8-ohm load.
What is the operating voltage of TAS5012IPFB?
The TAS5012IPFB operates from 3 V to 3.6 V. According to the Texas Instruments datasheet, this low-voltage supply range is intended for the digital signal-processing and PWM modulation section of a true digital audio amplifier. The companion power-output IC may use a different supply rail, so the two devices should not be assumed to share identical power requirements.
Does TAS5012IPFB directly drive a loudspeaker?
No, the TAS5012IPFB does not directly drive a loudspeaker. According to the Texas Instruments datasheet, it accepts a serial PCM digital-audio stream and converts it into a 3.3 V PWM audio stream. A compatible power-output device, such as the TAS5110, then drives the speaker through the system filter and output network.
Where can I download the TAS5012IPFB datasheet PDF?
The TAS5012IPFB datasheet PDF is available through the listed manufacturer-document mirror and the Texas Instruments document links indexed for this part. According to the manufacturer datasheet, the document describes the 2-channel PCM-to-PWM architecture, electrical limits, register behavior, and recommended application circuitry. Use the Texas Instruments datasheet for final design decisions.
Where can I find the TAS5012IPFB pinout?
The TAS5012IPFB pin assignments are found in the pin-description tables and package drawing in the Texas Instruments datasheet. The device uses a 48-pin TQFP package with 7 mm by 7 mm dimensions. Because individual terminal functions are not reproduced here, use the manufacturer pin table when assigning PCB tracks and checking no-connect positions.
Is TAS5012IPFB suitable for high-resolution audio?
The TAS5012IPFB is suitable for high-resolution digital audio designs because it accepts 24-bit data and supports 176.4 kHz and 192 kHz sampling. According to the Texas Instruments datasheet, it also provides 102 dB dynamic range with THD+N below 0.06%. Actual audible performance still depends on the power stage, clocking, filter design, PCB layout, and power supply.
What is the difference between TAS5012IPFB and TAS5012PFBRG4?
The TAS5012IPFB and TAS5012PFBRG4 use the same 48-pin TQFP footprint and provide the same stated core performance of 2 channels, 24-bit input, 102 dB dynamic range, and THD+N below 0.06%. Their ordering suffixes and qualification details differ, so existing production, traceability, and qualification requirements must be checked before substitution.
What is the best drop-in replacement for TAS5012IPFB?
The closest identified same-package replacement is TAS5012PFBRG4 because it uses the same 48-pin TQFP package and retains the TAS5012 PCM-to-PWM architecture. Its stated core electrical performance matches the TAS5012IPFB, but ordering, qualification, and lifecycle requirements can still differ. A replacement should be validated against the complete Texas Instruments datasheet before production release.
Can TAS5012IPFB be replaced by a cross-brand equivalent?
No verified cross-brand drop-in equivalent was identified for the TAS5012IPFB. The part combines a specific 48-pin interface, I2S input, differential PWM modulation, register behavior, and a required external power-output architecture. A different manufacturer or a different package may require software, schematic, and PCB changes, so it should not be treated as a drop-in replacement.
TAS5012IPFB vs TAS5012PFBRG4: which is better for a new audio design?
Choose TAS5012PFBRG4 when its ordering and qualification status meet the product requirements because it provides the same 48-pin TQFP footprint and equivalent core audio specifications. Retain TAS5012IPFB only when an existing design specifically requires that ordering code. According to the indexed comparison information, the terminals and packages are consistent, but lifecycle and qualification checks remain essential.
When should I choose TAS5012IPFB over another true digital audio processor?
Choose TAS5012IPFB when a design already targets its 48-pin TQFP footprint, 3 V to 3.6 V supply, 24-bit I2S interface, and two-channel PCM-to-PWM architecture. It is especially suitable for legacy or maintenance products using the established TAS5012 and TAS5110 signal chain. For new production, confirm availability and qualification before committing the obsolete ordering code.
Is TAS5012IPFB suitable for automotive audio applications?
The TAS5012IPFB is functionally suitable for 2-channel digital audio systems operating from 3 V to 3.6 V, but its stated ambient operating range is 0 °C to 70 °C. Automotive deployment requires additional qualification, temperature-range, transient, and reliability review. According to the Texas Instruments datasheet, the published operating range does not by itself establish AEC-Q100 suitability.
Where can I buy TAS5012IPFB and what is its lead time?
Use the Request a Quote form on this page to request TAS5012IPFB availability, unit pricing, minimum order quantity, and lead time. The device is identified as obsolete in the manufacturer-linked documentation, so current supply cannot be inferred from old catalog records. The quote team should confirm whether the exact ordering code remains available or whether an approved assembly change is needed.
What is the price of TAS5012IPFB?
Current commercial terms for TAS5012IPFB should be requested through the Request a Quote form on this page. The part is listed as obsolete, and legacy distributor records may not represent purchasable inventory or a supported production allocation. The quote response should confirm the exact suffix, manufacturer condition, quantity breaks, packaging, and expected delivery schedule.

Справочные инженерные данные для TAS5012IPFB — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose TAS5012IPFB for maintenance of an existing 48-pin TQFP design that uses the established Texas Instruments 2-channel PCM-to-PWM architecture, particularly when the companion power stage is a TAS5110-compatible device. Its 24-bit I2S input, 102 dB dynamic range, THD+N below 0.06%, and support for 176.4 kHz and 192 kHz sampling fit high-resolution powered-speaker systems. Evaluate TAS5012PFBRG4 when the same footprint and core performance are required but the ordering suffix or qualification details are more suitable. TAS5012IPFBG4 is another same-package ordering option whose lifecycle and production status must be confirmed. No verified cross-brand drop-in equivalent was found, because alternate processors can require different serial formats, register maps, PWM timing, package land patterns, or external power stages. For any substitution, validate clocking, control registers, output timing, thermal margins, and the complete manufacturer application circuit.

Сравнение с аналогами

Параметр Этот товар TAS5012PFBRG4 TAS5012IPFBG4
Package 48-pin TQFP (7 mm x 7 mm) 48-pin TQFP (7 mm x 7 mm) 48-pin TQFP (7 mm x 7 mm)
Brand Texas Instruments Texas Instruments Texas Instruments
Product Type Digital audio PWM processor Digital audio PWM processor Digital audio PWM processor
Channel Count 2 channels 2 channels 2 channels
Dynamic Range 102 dB 102 dB 102 dB
Total Harmonic Distortion Plus Noise < 0.06% < 0.06% < 0.06%
Input Word Length 24 bits 24 bits 24 bits
Supply Voltage Range 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V
Digital Audio Interface I2S I2S I2S
Sampling Rate Support 176.4 kHz and 192 kHz 176.4 kHz and 192 kHz 176.4 kHz and 192 kHz
System Power Efficiency 90% into an 8-ohm load 90% into an 8-ohm load 90% into an 8-ohm load

Ключевые отличия

  • Matches the identified same-package alternative on core audio performance (против TAS5012PFBRG4)
  • Retains the established TAS5012 PCM-to-PWM interface architecture (против TAS5012IPFBG4)
  • Supports high-rate 24-bit audio in a two-channel implementation (против TAS5012PFBRG4)

Заметки по проектированию

Place the TAS5012IPFB close to the I2S source and the compatible PWM power stage to minimize clock and data-trace exposure. Keep the two-channel differential PWM routing symmetrical, with continuous reference planes and short return paths. Because the output is a PWM signal rather than a low-frequency analog waveform, use the recommended output-network and grounding arrangement from the manufacturer application circuitry rather than treating it as a conventional analog output.

Decouple the 3 V to 3.6 V digital supply at the device with the capacitance and placement specified by the Texas Instruments application circuit. The processor is separated from the loudspeaker power stage, so its supply should remain quiet and independent of speaker-current returns. Account for startup sequencing, control-signal states, and the power requirements of the companion PWM driver when defining the system rail architecture.

Route I2S data, bit clock, and word-clock signals as a coordinated source-synchronous group over a continuous ground plane. Match trace lengths where clock-to-data timing margins require it, and avoid crossings with PWM outputs or power-stage switching nodes. The processor supports 192 kHz sampling and 24-bit data, so edge-quality loss and noncompliant clocking can affect decoding even when the nominal sampling rate is correct.

Do not treat TAS5012IPFB as a direct speaker driver. The documented system separates the PCM-to-PWM processor from a power-output IC such as the TAS5110, and the analog output network and speaker current capability are determined by that stage. Also verify clock polarity, data format, reset behavior, channel mapping, and power-state sequencing against the manufacturer register and application information before releasing production firmware.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were confirmed for the exact ordering code. The stated 0 °C to 70 °C operating range should not be interpreted as automotive qualification.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TAS5012IPFB datasheet TAS5012IPFB pinout TAS5012IPFB datasheet pdf TAS5012IPFB equivalent TAS5012IPFB replacement TAS5012IPFB vs TAS5012PFBRG4 TAS5012IPFB footprint TAS5012IPFB application circuit TAS5012IPFB price TAS5012IPFB stock Texas Instruments TAS5012IPFB 48-pin TQFP digital audio PWM processor

Связанные компоненты & термины

Texas Instruments TAS5012IPFB TAS5012PFBRG4 TAS5012IPFBG4 TAS5110 true digital audio amplifier TDAA digital audio PWM processor digital signal processor DSP I2S PCM PWM 24-bit audio 176.4 kHz sampling 192 kHz sampling dynamic range THD+N 48-pin TQFP TQFP package family surface mount SMD powered speaker automotive audio RoHS REACH AEC-Q100
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ