TAS5012IPFB - 2-Channel 24-Bit Audio Processor | Texas Instruments
MPN: TAS5012IPFB ✗ 停產TAS5012IPFB 概覽
A true digital audio amplifier, or TDAA, divides an audio system into a digital signal-processing stage and a separate power-output stage. The TAS5012IPFB performs the digital portion by accepting an I2S-compatible PCM stream, processing two audio channels, and generating a 3.3 V PWM output stream. A companion power stage such as the TAS5110 converts that PWM stream into a filtered analog audio output. This architecture separates digital signal handling from power amplification.
The processor supports 24-bit input data at 176.4 kHz and 192 kHz sampling rates. Its specified dynamic range is 102 dB, while total harmonic distortion plus noise is less than 0.06%. The associated system can achieve 90% power efficiency into an 8-ohm load. These characteristics suit compact, high-fidelity audio products where a digital signal path improves channel matching and leaves final power amplification to a dedicated PWM driver.
TAS5012IPFB uses a DSP-oriented interface and converts serial PCM audio into a differential, self-modulating PWM signal suitable for a true digital audio amplifier architecture. The 3 V to 3.6 V operating range supports a conventional low-voltage digital audio subsystem. Because the IC does not directly drive loudspeakers, system-level output power depends on the selected PWM power device, filter network, supply capability, and speaker impedance.
Typical uses include powered speakers, wireless speaker systems, compact stereo products, audio docking stations, home-theater equipment, and automotive audio head units. The processor can also serve digital crossover or multi-channel designs where its two independent PCM channels feed compatible PWM output stages. Its 48-pin TQFP package provides adequate routing density for clock, serial-data, control, and PWM connections without requiring a fine-pitch BGA.
The primary design consideration is interface and power-stage matching. The selected PWM amplifier must accept the TAS5012 differential output, support the intended sampling rate, and meet the required output-power and filter design. PCB layout should isolate sensitive clock and I2S signals from the switching node and output-filter region, while decoupling should be placed directly at the supply pins.
This page combines the device specifications, lifecycle status, documented functional relationships, practical application guidance, and verified drop-in alternatives. It is intended to help engineers locate the datasheet, understand the digital audio architecture, evaluate replacement options, and plan a reliable PCB layout without treating the obsolete status as evidence of a modern drop-in replacement.
直接替換替代品,適用於 TAS5012IPFB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TAS5012IPFB (相同外形與佔位) — 差異在於 Operating Temperature Range, Package, System Power Efficiency.
TAS5012PFBRG4
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5012IPFBG4
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5012IPFB 最大額定值與電氣特性
| Product Type | True digital audio amplifier signal processor |
| Number of Channels | 2 channels |
| Dynamic Range | 102 dB |
| Total Harmonic Distortion Plus Noise | < 0.06% |
| System Power Efficiency | 90% into an 8-ohm load |
| Input Word Length | 24 bits |
| Maximum Stated Sampling Rate | 192 kHz |
| Supported High-Rate Sampling | 176.4 kHz and 192 kHz |
| Supply Voltage Range | 3 V to 3.6 V |
| Digital Audio Interface | I2S |
| Internal Processing | DSP |
| 輸出類型 | 3.3 V PWM audio stream |
| 封裝 | 48-pin TQFP, 7 mm x 7 mm |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | 0 °C to 70 °C ambient |
| Product Status | Obsolete |
TAS5012IPFB 48-pin tqfp, 7 mm x 7 mm 腳位配置指南
TAS5012IPFB(48-pin tqfp, 7 mm x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: TAS5012IPFB.
請參閱 資料表 以查看完整腳位配置。
典型應用
TAS5012IPFB 適用於 6 應用s: Powered Speaker System, Wireless Speaker, Automotive Audio Head Unit, Audio Docking Station, Home Theater Stereo Output, Digital Speaker Development Platform.
Powered Speaker System
The TAS5012IPFB fits a two-channel powered-speaker design because it accepts 24-bit I2S audio, processes two channels, and generates a 3.3 V differential PWM stream. The processor's 102 dB dynamic range and THD+N below 0.06% preserve the numerical advantage of a digital audio path. In the finished amplifier, a compatible PWM power device drives the 8-ohm speaker, while the documented system efficiency can reach 90%. The primary design constraint is synchronization between the TAS5012 modulation signals and the external power stage.
推薦
Wireless Speaker
The TAS5012IPFB is appropriate for the digital output stage of a wireless speaker after a network or Bluetooth audio source produces a PCM stream. Its I2S interface and 24-bit input word length support high-resolution sources, while 176.4 kHz and 192 kHz operation covers high-rate content. The 3 V to 3.6 V supply suits a compact digital subsystem, and the 48-pin TQFP leaves accessible routing for clocks, serial data, control signals, and differential PWM outputs. Wireless-radio integration remains outside this device's function.
推薦
Automotive Audio Head Unit
The TAS5012IPFB can serve the digital audio path in an automotive head unit when the system supplies compatible 24-bit I2S data and the design satisfies environmental qualification requirements. Its 2-channel architecture supports stereo content, 102 dB dynamic range, and THD+N below 0.06%, while the external PWM power stage keeps loudspeaker drive current out of the processor. Because the published ambient range is 0 °C to 70 °C, vehicle temperature extremes, load transients, vibration, and EMC requirements must be validated separately before release.
推薦
Audio Docking Station
The TAS5012IPFB is suitable for a compact docking station that accepts digital audio from a host processor and delivers it to a pair of powered speakers. The I2S input avoids an analog input stage at the processor boundary, while the 2-channel capability matches conventional stereo playback. Its 3 V to 3.6 V operating range simplifies integration with a 3.3 V digital domain, and the 102 dB dynamic range provides headroom for high-quality source material. Mechanical stability and EMI performance depend on the external power stage and filter layout.
推薦
Home Theater Stereo Output
The TAS5012IPFB can implement a dedicated two-channel digital audio output for a home-theater system in which the source already supplies PCM data. The processor converts that stream into differential PWM signals for an external power amplifier, supporting 24-bit content at 176.4 kHz or 192 kHz. Its 102 dB dynamic range and THD+N below 0.06% are useful for preserving low-level detail, while the external power stage defines available loudspeaker power. Channel routing, sample-rate conversion, volume control, and source switching remain system-level functions.
推薦
Digital Speaker Development Platform
The TAS5012IPFB is useful in a development platform for evaluating a true digital audio signal chain because it separates digital modulation from loudspeaker power amplification. Engineers can feed 24-bit I2S data, inspect the differential PWM outputs, and connect a TAS5110-compatible power stage for an 8-ohm load. The documented combination of 102 dB dynamic range, THD+N below 0.06%, and 90% system efficiency provides concrete performance targets. Board prototyping must still address clocking, grounding, output filtering, and the power stage's switching layout.
推薦
推薦產品摘要
工程參考資料,適用於 TAS5012IPFB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TAS5012PFBRG4 | TAS5012IPFBG4 |
|---|---|---|---|
| Package | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Digital audio PWM processor | Digital audio PWM processor | Digital audio PWM processor |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Dynamic Range | 102 dB | 102 dB | 102 dB |
| Total Harmonic Distortion Plus Noise | < 0.06% | < 0.06% | < 0.06% |
| Input Word Length | 24 bits | 24 bits | 24 bits |
| Supply Voltage Range | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Digital Audio Interface | I2S | I2S | I2S |
| Sampling Rate Support | 176.4 kHz and 192 kHz | 176.4 kHz and 192 kHz | 176.4 kHz and 192 kHz |
| System Power Efficiency | 90% into an 8-ohm load | 90% into an 8-ohm load | 90% into an 8-ohm load |
主要差異化特點
- Matches the identified same-package alternative on core audio performance (對比TAS5012PFBRG4)
- Retains the established TAS5012 PCM-to-PWM interface architecture (對比TAS5012IPFBG4)
- Supports high-rate 24-bit audio in a two-channel implementation (對比TAS5012PFBRG4)
設計說明
Place the TAS5012IPFB close to the I2S source and the compatible PWM power stage to minimize clock and data-trace exposure. Keep the two-channel differential PWM routing symmetrical, with continuous reference planes and short return paths. Because the output is a PWM signal rather than a low-frequency analog waveform, use the recommended output-network and grounding arrangement from the manufacturer application circuitry rather than treating it as a conventional analog output.
Decouple the 3 V to 3.6 V digital supply at the device with the capacitance and placement specified by the Texas Instruments application circuit. The processor is separated from the loudspeaker power stage, so its supply should remain quiet and independent of speaker-current returns. Account for startup sequencing, control-signal states, and the power requirements of the companion PWM driver when defining the system rail architecture.
Route I2S data, bit clock, and word-clock signals as a coordinated source-synchronous group over a continuous ground plane. Match trace lengths where clock-to-data timing margins require it, and avoid crossings with PWM outputs or power-stage switching nodes. The processor supports 192 kHz sampling and 24-bit data, so edge-quality loss and noncompliant clocking can affect decoding even when the nominal sampling rate is correct.
Do not treat TAS5012IPFB as a direct speaker driver. The documented system separates the PCM-to-PWM processor from a power-output IC such as the TAS5110, and the analog output network and speaker current capability are determined by that stage. Also verify clock polarity, data format, reset behavior, channel mapping, and power-state sequencing against the manufacturer register and application information before releasing production firmware.
合規資訊
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were confirmed for the exact ordering code. The stated 0 °C to 70 °C operating range should not be interpreted as automotive qualification.