Texas Instruments

TAS5805MPWP - 23W Stereo Class-D Audio Amplifier | Texas Instruments

Артикул: TAS5805MPWP ✓ Активен
4.5 V to 26.4 V Vdss 28-pin HTSSOP Package
MOQ: 1 |

TAS5805MPWP Обзор

The Texas Instruments TAS5805MPWP is a 23 W stereo, 45 W mono, inductor-less Class-D audio amplifier with digital input, a 4.5 V to 26.4 V supply range, and a 28-pin HTSSOP package. Its closed-loop architecture and integrated audio processor support efficient speaker drive with low standby power dissipation.

A Class-D audio amplifier is a switching power amplifier that uses a high-frequency PWM output stage to deliver audio energy to a speaker. It belongs to the hierarchy of audio amplifiers, linear audio amplifiers, and power-management semiconductors. Compared with a conventional linear output stage, the TAS5805M architecture is intended to reduce power loss and provide a cost-effective digital-input solution while retaining closed-loop speaker-current feedback.

The TAS5805M integrates a 96 kHz signal-processing architecture with sample-rate conversion, 15 biquads per channel, volume control, audio mixing, three-band fourth-order dynamic range control, full-band automatic gain limiting, and THD management. This combination supports speaker protection, level control, and source-specific tuning without requiring a separate digital-audio processor for every basic function.

The device supports stereo or mono operation and can deliver up to 23 W per stereo channel under the conditions specified by Texas Instruments. Its 4.5 V to 26.4 V supply range accommodates portable, industrial, and consumer audio systems. The manufacturer describes the design as inductor-less, allowing the external speaker interface to use a conventional LC filter rather than requiring an output inductor.

Typical uses include soundbars, smart speakers, television and monitor audio, compact consumer systems, and other digital-input audio products. The 96 kHz processing architecture is particularly relevant when the design needs advanced level management and speaker protection close to the power stage. Digital control data is handled through the device's serial audio and control interface.

A critical layout requirement is keeping the Class-D switching node compact and isolated from sensitive input and control traces. Follow the manufacturer datasheet's power, ground, decoupling, and filter-layout guidance because high dV/dt switching edges can create EMI coupling and ground bounce. The exposed thermal pad also requires careful thermal design when the amplifier operates near its maximum output power.

This product page combines the exact ordering information, verified manufacturer and distributor resources, strict drop-in assessment, application guidance, and design-focused comparisons. It helps engineers determine whether the TAS5805MPWP fits a digital-input speaker design before committing to a PCB or firmware configuration.

Аналоги без доработки для TAS5805MPWP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

TAS5805MPWP Максимальные параметры и электрические характеристики

Device Type Digital-input, closed-loop Class-D stereo audio amplifier
Выходная конфигурация 2-channel stereo or 1-channel mono
Maximum Stereo Output Power 23 W
Maximum Mono Output Power 45 W
Supply Voltage Range 4.5 V to 26.4 V
Architecture Closed-loop Class-D
Output Filter Requirement Inductor-less
Input Format Digital input
Processor Architecture 96 kHz
Biquads per Channel 15
Dynamic Range Control 3-band, 4th-order
Automatic Gain Limiting Full-band
THD Management Integrated
Sample-Rate Conversion Supported
Audio Mixing Supported
Volume Control Supported
Корпус 28-pin HTSSOP
Тип монтажа Surface mount

Руководство по цоколевке TAS5805MPWP в корпусе 28-pin htssop

Цоколевка для TAS5805MPWP (корпус 28-pin htssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 28-pin htssop для TAS5805MPWP

Нет подробных данных о распиновке для TAS5805MPWP.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TAS5805MPWP подходит для 6 применениеs: Compact Stereo Speaker, Soundbar Speaker Module, Television Audio Platform, Smart Speaker, Digital-Input Audio Module, Industrial Audio Annunciator.

🎧

Compact Stereo Speaker

The TAS5805MPWP fits a compact powered speaker that accepts digital audio and needs up to 23 W per stereo channel. Its digital-input architecture avoids an analog-input stage near the power amplifier, while the integrated 96 kHz processor provides volume control, sample-rate conversion, mixing, and 15 biquads per channel. This can simplify signal routing in a soundbar, compact stereo, or multimedia speaker. The designer must still select the correct speaker filter, verify operation at the intended 4.5 V to 26.4 V supply, and validate that the chosen audio level remains thermally practical. Filter and feedback layout should follow the manufacturer recommendations because the high-voltage switching node can couple interference into nearby control paths.

🔊

Soundbar Speaker Module

The TAS5805MPWP is well suited to a soundbar channel because its digital input supports direct integration with a system audio bus, and its integrated DRC, AGL, and THD management can protect a compact speaker from program-level variations. The 23 W stereo capability provides useful output headroom without requiring a separate analog codec. In this application, channel routing and volume behavior should be configured through the control interface, while the external speaker filter must be tuned for the actual impedance. PCB placement should isolate the Class-D switching node from the digital input and control traces to limit EMI in a consumer enclosure that may also contain radio, display, and switching-power circuitry.

📺

Television Audio Platform

The TAS5805MPWP can provide efficient stereo speaker drive in a television or monitor platform when the host processor supplies digital audio. Its integrated mixer and sound-processing resources can support multiple source paths, level control, and speaker protection, reducing the need for separate digital signal-processing hardware. The 4.5 V minimum supply supports integration with common low-voltage audio rails, but engineers must verify the amplifier's output-power curve at the actual rail and load. Thermal copper must extend beneath the package's exposed thermal area, and the switching output should be routed away from sensitive display, tuner, and microphone circuitry to preserve signal integrity within the enclosure.

🧩

Smart Speaker

The TAS5805MPWP supports a smart-speech or connected-audio product that combines digital source routing with local speaker amplification. Digital mixing, SRC, volume control, and programmable biquads can consolidate signal management near the power stage, while DRC, AGL, and THD management add useful protection functions. For a voice-enabled product, the amplifier layout must remain separated from microphone analog paths and other low-level sensing circuits. The 23 W stereo rating can suit compact speakers, but thermal performance depends on supply voltage, channel loading, efficiency, and ambient conditions. Firmware configuration should be coordinated with the control-interface timing and audio-clock requirements described by Texas Instruments.

🖥️

Digital-Input Audio Module

The TAS5805MPWP is suitable for a modular digital audio output card that accepts compressed or PCM audio from a host processor and drives passive speakers directly. Its integrated 96 kHz processing architecture allows equalization, level control, DRC, AGL, and THD management to be consolidated within the power-amplifier module. Using the module approach also keeps analog audio traces away from the digital source and reduces board area in space-constrained systems. The engineer must define the digital clocking and control protocol correctly, implement the recommended external filter, and maintain a continuous ground reference beneath and around the power stage. Validate startup, mute behavior, speaker impedance, and thermal rise before releasing the module for volume production.

🏭

Industrial Audio Annunciator

The TAS5805MPWP can drive a high-efficiency stereo or bridged mono speaker used in an industrial annunciator, control cabinet, or operator-console audio system. Digital input allows announcements to originate from a central controller, while integrated mixing and volume functions help manage multiple message paths. The 23 W stereo and 45 W mono headline capabilities offer useful flexibility, subject to the actual supply and load conditions. Industrial equipment should account for enclosure temperature, long operating duty cycles, and isolation from electromagnetic fields. Use filtering that matches the chosen speaker impedance, maintain low-impedance decoupling, and route switching-node copper carefully so announcements remain intelligible without audible filter or switching interference.

What is the TAS5805MPWP?
The TAS5805MPWP is a Texas Instruments digital-input, stereo, closed-loop Class-D audio amplifier rated for 23 W stereo output or 45 W mono output from a 4.5 V to 26.4 V supply. According to the manufacturer datasheet, it uses an inductor-less output architecture and integrates a 96 kHz audio processor with 15 biquads per channel, DRC, AGL, volume control, mixing, SRC, and THD management in a 28-pin HTSSOP package.
What are the key specifications of TAS5805MPWP that engineers should know?
The TAS5805MPWP combines 23 W stereo output, 45 W mono output, a 4.5 V to 26.4 V supply range, digital input, and a 28-pin HTSSOP package. According to the Texas Instruments TAS5805M datasheet, its 96 kHz processor supports sample-rate conversion, 15 biquads per channel, audio mixing, volume control, three-band fourth-order DRC, full-band AGL, and THD management, allowing a compact speaker design with integrated level and protection functions.
Where can I download the TAS5805MPWP datasheet PDF?
The official TAS5805M datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tas5805m.pdf. The manufacturer product page identifies TAS5805MPWP as an orderable member of the TAS5805M family and lists the data sheet as revision D. Use the pin-description and application sections in that document when assigning PCB tracks and selecting the external filter and decoupling network.
Where can I find the TAS5805MPWP pinout?
The TAS5805MPWP pinout is defined in the pin-configuration section of the official Texas Instruments TAS5805M datasheet. The verified distributor listing identifies the device as a 28-pin HTSSOP with both mono and stereo output options. Use the manufacturer's numbered package drawing and pin-description table as the authority for PCB land patterns, power connections, control signals, and exposed-pad treatment.
What is the TAS5805MPWP output power at a 4.5 V supply?
The 23 W stereo and 45 W mono ratings are maximum device capabilities, not guaranteed output levels at every supply voltage. The Texas Instruments datasheet defines output power using specific supply, load, channel-count, and thermal conditions. Design from the datasheet power tables for the actual 4.5 V to 26.4 V operating range rather than assuming the headline 23 W rating remains available at the minimum supply.
What audio processing does the TAS5805MPWP include?
The TAS5805MPWP integrates a 96 kHz audio-processing architecture with sample-rate conversion, 15 biquads per channel, volume control, audio mixing, three-band fourth-order dynamic range control, full-band automatic gain limiting, and THD management. According to the manufacturer datasheet, these functions support sound enrichment, level control, and speaker protection in digital-input Class-D systems.
How should a speaker filter be designed for TAS5805MPWP?
The TAS5805MPWP requires an external speaker filter because it is an inductor-less Class-D output device. The Texas Instruments application guidance should be followed for the LC topology, component values, speaker impedance, and feedback connection. Keep the switching node compact, provide a low-impedance ground path, and isolate the filter from sensitive digital and analog control traces to limit EMI.
Can TAS5805MPWP be used in a mono speaker design?
Yes, the TAS5805MPWP supports a 1-channel mono configuration as well as 2-channel stereo operation. The manufacturer describes up to 45 W mono output and 23 W stereo output. The appropriate channel configuration, filter values, and feedback connections must follow the TAS5805M datasheet because a bridged mono arrangement and two independent stereo channels have different signal and thermal requirements.
TAS5805MPWP vs TAS5805MPWF - which one is pin-compatible?
The TAS5805MPWP should not be treated as a drop-in match for the TAS5805MPWF without checking the official package drawings. Cross-reference information describes the TAS5805MPWF as similar but in a different package type, while the target TAS5805MPWP uses a 28-pin HTSSOP package. Confirm land pattern, exposed-pad geometry, pin numbering, and thermal-pad connection before considering a PCB substitution.
What can replace TAS5805MPWP?
A true drop-in replacement must use the same 28-pin HTSSOP land pattern, preserve pin numbering, support the required 4.5 V to 26.4 V supply, and provide compatible digital-audio and control functions. Cross-reference results identify TAS5806MDPW, TAS5807MDPW, and TAS5808MDPW as functionally related products, but the available information does not establish that their packages and pinouts match the TAS5805MPWP. Treat them as redesign candidates until package compatibility is verified.
When should I choose TAS5805MPWP over a similar TI Class-D amplifier?
Choose the TAS5805MPWP when a product needs digital input, 23 W stereo or 45 W mono capability, integrated 96 kHz processing, and a 28-pin HTSSOP implementation. Its integrated DRC, AGL, THD management, mixing, SRC, and 15 biquads per channel can simplify a compact speaker design. Select another related device only after confirming package, pinout, supply, thermal, and processing differences against the target design.
Is TAS5805MPWP suitable for a soundbar or compact stereo product?
The TAS5805MPWP is suitable for compact digital-input stereo products such as soundbars and smart speakers when its 23 W per-channel capability matches the required listening level. Its integrated processing can reduce the need for external level-control circuitry. The final design must still verify speaker impedance, amplifier thermals, DC offset, filter response, EMI limits, and protection behavior against the manufacturer application guidance.
How much thermal design is required for TAS5805MPWP?
Thermal design is essential when operating near the 23 W stereo or 45 W mono limits. The 28-pin HTSSOP exposes a thermal connection area that must be coupled to the PCB copper plane according to the manufacturer layout guidance. Estimate dissipated power from the actual supply voltage, output power, efficiency, and idle load, then verify junction temperature across the highest ambient temperature and worst-case audio load.
Where can I buy TAS5805MPWP online?
Use the Request a Quote form on this page to request TAS5805MPWP availability, current lead time, and order details. Texas Instruments lists the part through the TAS5805M ordering page, while verified distributor listings cover the exact TAS5805MPWP ordering code. Confirm authorized channel, quantity, moisture-sensitive handling requirements, and delivery terms when placing the order.
What is the price of TAS5805MPWP?
Current commercial terms for the TAS5805MPWP should be requested through the Request a Quote form on this page because pricing, stock, and lead time can vary with quantity and channel. The structured pricing area displays current qualified listings when available. Provide the required quantity, target date, and shipment destination so the supplier can return an actionable quotation for the exact 28-pin HTSSOP ordering code.
What is the lead time for TAS5805MPWP?
The current lead time for TAS5805MPWP should be confirmed through the Request a Quote form on this page. Texas Instruments identifies TAS5805MPWP as part of the active TAS5805M family, but availability and production scheduling can vary by order quantity and date. The quotation request should include quantity, ship-to region, and required delivery date to obtain a specific commitment.
Is TAS5805MPWP in stock?
Current TAS5805MPWP stock should be checked through the Request a Quote form on this page. Verified distributor listings show the exact ordering code, but a listing alone does not establish the quantity available for a specific order or delivery date. Submit the required quantity and destination to receive a current availability response rather than relying on an unconfirmed stock indication.
What is the best TI equivalent for TAS5805MPWP?
The closest functional alternatives identified for the TAS5805MPWP are the Texas Instruments TAS5806MDPW, TAS5807MDPW, and TAS5808MDPW, which provide related digital Class-D amplifier functionality with variations in output power, channel configuration, and features. They should not be called drop-in replacements until their package dimensions, pin numbering, control interfaces, and exposed-pad requirements are checked against the 28-pin HTSSOP TAS5805MPWP footprint.

Справочные инженерные данные для TAS5805MPWP — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the TAS5805MPWP for a digital-input stereo or mono design requiring up to 23 W per stereo channel or 45 W in mono, together with integrated level control, mixing, SRC, equalization, DRC, AGL, and THD management. Its 4.5 V to 26.4 V supply range supports low- through mid-voltage systems, while the 28-pin HTSSOP is appropriate when a compact surface-mount footprint is required. TAS5806MDPW, TAS5807MDPW, and TAS5808MDPW are related functional choices when their output power, channel configuration, processing, or package better matches a redesign, but they are not treated as drop-in replacements. For a board already designed around the TAS5805MPWP, retain the exact ordering code unless Texas Instruments or the authorized channel confirms a pin- and land-pattern-compatible replacement. Final selection should include output power at the actual supply, speaker impedance, thermal rise, filter design, EMI control, and digital-clock compatibility.

Сравнение с аналогами

Параметр Этот товар
Manufacturer Texas Instruments
Package 28-pin HTSSOP
Output Configuration Stereo or mono
Maximum Stereo Output Power 23 W
Maximum Mono Output Power 45 W
Supply Voltage Range 4.5 V to 26.4 V
Amplifier Architecture Digital-input, closed-loop Class-D
Processing Architecture 96 kHz with 15 biquads per channel
Speaker Protection Features 3-band DRC, full-band AGL, and THD management
Output Filter Inductor-less architecture with external filter

Заметки по проектированию

Keep the Class-D switching node and external filter loop as small as practical, and route them away from the digital-audio input, control signals, and feedback traces. Provide a continuous ground plane beneath the power stage and place local input, output, and bypass connections directly at their associated pins. Follow the Texas Instruments datasheet layout pattern exactly because a large switching loop can increase EMI, ground bounce, and susceptibility to audible interference.

Estimate dissipation from the actual supply voltage, output power, channel loading, and amplifier efficiency, then verify junction temperature with the PCB's thermal copper area and the worst-case ambient temperature. The 23 W stereo and 45 W mono figures are maximum capability figures rather than guarantees across every voltage and load condition. Avoid reducing thermal-pad solder coverage; use the manufacturer's recommended land pattern and verify the assembled board rather than relying only on an estimated temperature rise.

Use low-ESR, appropriately rated bypass capacitors close to the supply pins and route the power return through the package thermal area as specified by the manufacturer. Place the external speaker-filter components where their switching current produces the smallest loop. Confirm supply tolerance, startup sequencing, mute behavior, and maximum input conditions so the amplifier never operates outside the 4.5 V to 26.4 V supply range.

Do not interpret the 23 W stereo rating as guaranteed output at every supply voltage or speaker impedance. Review the output-power tables, external-filter requirements, feedback configuration, and supported channel modes in the TAS5805M datasheet. Also avoid treating functionally similar TAS5806M, TAS5807M, or TAS5808M products as drop-in replacements without verifying package dimensions, exposed-pad geometry, pin numbering, and control-interface compatibility.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The verified Texas Instruments product and distributor information does not explicitly state the requested compliance attributes. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status in the current manufacturer product documentation before procurement.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TAS5805MPWP datasheet TAS5805MPWP datasheet pdf TAS5805MPWP pinout TAS5805MPWP schematic TAS5805MPWP equivalent TAS5805MPWP replacement TAS5805MPWP cross reference TAS5805MPWP price TAS5805MPWP stock Texas Instruments TAS5805MPWP TAS5805MPWP 28 HTSSOP TAS5805MPWP digital Class-D amplifier

Связанные компоненты & термины

Texas Instruments TAS5805MPWP TAS5805M TAS5806MDPW TAS5807MDPW TAS5808MDPW Class-D amplifier closed-loop audio amplifier digital-input audio amplifier power-management semiconductor 96 kHz audio processor sample-rate conversion dynamic range control automatic gain limiting THD management audio mixing biquad filter volume control HTSSOP-28 surface-mount package digital audio interface speaker filter soundbar smart speaker RoHS
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ