Texas Instruments

THS4211DRB - 1 GHz Low-Distortion Op Amp | Texas Instruments

Артикул: THS4211DRB ✓ Активен
5 V to 15 V Vdss 200 mA Id 8-VSON with exposed pad, 3 mm × 3 mm Package
MOQ: 1 |

THS4211DRB Обзор

The Texas Instruments THS4211DRB is a single-channel, unity-gain-stable voltage-feedback operational amplifier with 1 GHz bandwidth, a 970 V/µs slew rate, and a 5 V to 15 V supply range. It is packaged in an 8-VSON surface-mount package with an exposed pad, measuring 3 mm by 3 mm. The amplifier is designed for high-speed signal conditioning where low distortion and accurate large-signal behavior are more important than low quiescent current.

A high-speed voltage-feedback operational amplifier is a transistor-based amplifier that uses negative feedback to amplify signals while maintaining controlled bandwidth, gain, and phase behavior. Within the amplifier hierarchy, the THS4211DRB is an operational amplifier, a voltage-feedback amplifier, and a high-speed signal-conditioning IC. Its unity-gain stability allows operation without a decompensation resistor, while its 3 mm by 3 mm VSON package supports compact analog, video, communications, and test-equipment circuits.

The principal performance features include 1 GHz small-signal bandwidth, 970 V/µs slew rate, 200 mA output drive, and low third-harmonic distortion of -90 dBc at 30 MHz. Differential gain is specified at 0.003°, and the 130 MHz bandwidth with 0.1 dB gain variation supports wideband signal paths. These characteristics are particularly useful when large output transitions, multi-channel timing, or high-order harmonic content would otherwise limit system performance.

The voltage-feedback topology provides a direct relationship between input differential voltage and output voltage, with gain determined mainly by external feedback components. Unity-gain stability makes the device usable as a buffer, while higher closed-loop gains can be created with conventional resistor networks. The exposed thermal pad provides the primary path for heat removal when the amplifier dissipates appreciable power during large-signal operation. Designers should account for output-current demand, supply headroom, feedback-component matching, and parasitic capacitance when working at high frequencies.

Typical applications include high-speed analog buffers, video-signal conditioning, active filters, current-sense amplifiers, communications receivers, and laboratory or instrumentation front ends. The 1 GHz bandwidth and 970 V/µs slew rate also make the device suitable for waveform edges that must remain square or accurately reproduced. A gain or bandwidth tradeoff may be required when the input signal contains significant out-of-band energy.

For layout, use a low-inductance ground plane, place feedback components close to the amplifier pins, and provide very short return paths for both supply rails. The exposed pad should be connected to the ground plane through multiple vias while observing the package land-pattern requirements. Decoupling capacitors should be placed directly at the supply pins, and test points should not interrupt high-speed feedback traces.

This product page combines the manufacturer's principal performance characteristics, commercial sourcing information, and application-focused engineering guidance. It also distinguishes exact drop-in interchangeability from devices that merely use a related package, helping designers evaluate PCB reuse, signal bandwidth, thermal capability, and supply requirements before committing to a replacement.

Аналоги без доработки для THS4211DRB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

THS4211DRB Максимальные параметры и электрические характеристики

Amplifier Type Single-channel voltage-feedback operational amplifier
Number of Circuits 1 circuit
Gain Stability Unity-gain stable
Small-Signal Bandwidth 1 GHz
Slew Rate 970 V/µs
Third-Harmonic Distortion -90 dBc at 30 MHz
Flat-Bandwidth Gain 130 MHz at 0.1 dB
Differential Gain 0.003°
Output Drive Current 200 mA
Supply Voltage Range 5 V to 15 V
Ток потребления 19 mA
Output Current 220 mA
Shutdown Supply Current 7 µA
Диапазон рабочих температур -40 °C to 85 °C
Корпус 8-VSON with exposed pad, 3 mm × 3 mm
Тип монтажа Surface mount

Руководство по цоколевке THS4211DRB в корпусе 8-vson with exposed pad, 3 mm × 3 mm

Цоколевка для THS4211DRB (корпус 8-vson with exposed pad, 3 mm × 3 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-vson with exposed pad, 3 mm × 3 mm для THS4211DRB

Нет подробных данных о распиновке для THS4211DRB.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

THS4211DRB подходит для 6 применениеs: High-Speed Video Signal Conditioning, Active Wideband Filtering, Communication Receiver Front Ends, Precision Current-Sense Amplification, Test and Measurement Instrumentation, High-Speed Data Acquisition.

📺

High-Speed Video Signal Conditioning

The THS4211DRB fits video amplification and buffering because it combines 1 GHz bandwidth with a 970 V/µs slew rate, allowing fast transition edges to remain well controlled. Its -90 dBc third-harmonic distortion at 30 MHz is valuable when downstream circuitry must receive a clean amplified representation of the source signal. The amplifier can be configured at unity gain or with conventional external feedback while maintaining stability. The 200 mA output-drive specification provides margin for suitable video loads, but cable and termination capacitance should be included in simulation because they can reduce stability or trigger ringing.

🔧

Active Wideband Filtering

The THS4211DRB is suitable for active filters requiring accurate amplification over a broad frequency range. Its 1 GHz small-signal bandwidth, 130 MHz bandwidth at 0.1 dB, and 0.003° differential gain provide useful performance targets for multi-stage filter design. The 970 V/µs slew rate helps preserve large-signal behavior, while unity-gain stability simplifies buffer stages. Component tolerance, parasitic capacitance, and amplifier noise can alter the realized response, so simulate the complete filter around the intended gain and load rather than relying only on nominal bandwidth figures.

🌐

Communication Receiver Front Ends

The THS4211DRB can serve in high-speed receiver front ends where signal amplification must preserve both amplitude and phase. Its 1 GHz bandwidth handles wideband data paths, while the 970 V/µs slew rate supports rapid transitions and the 200 mA output-drive capability supports suitable termination networks. Low distortion at 30 MHz can reduce added spectral content in measurement or demodulation paths. The designer must still verify common-mode limits, input-referred noise, gain flatness, and the effect of PCB parasitics across the operating frequency range.

⚡

Precision Current-Sense Amplification

The THS4211DRB can amplify small differential signals in current-measurement systems when high bandwidth is important. Its 0.003° differential-gain figure and 1 GHz bandwidth support accurate treatment of rapidly changing current signals, while the 970 V/µs slew rate limits slew-related error during fast edges. A low-value sense resistor can produce millivolt-scale signals that require careful grounding and Kelvin routing. Check input and output common-mode ranges, supply headroom, and the amplifier's offset and noise characteristics against the measurement resolution required by the application.

🖥️

Test and Measurement Instrumentation

The THS4211DRB is appropriate for instrumentation requiring low-distortion buffering of fast test signals. Its 1 GHz bandwidth, 970 V/µs slew rate, and 200 mA output drive allow it to retain signal shape across many waveform-generator and analyzer input ranges. Unity-gain stability supports direct buffer use, while external feedback permits selectable gain. At the 3 mm by 3 mm VSON scale, thermal design and ground-plane continuity become especially important; route the exposed pad to a solid ground area and keep input and output loops physically separate to reduce parasitic feedback.

🏭

High-Speed Data Acquisition

The THS4211DRB fits the analog input stage of high-speed data-acquisition systems that need wide bandwidth and low distortion. The 1 GHz amplifier bandwidth and 970 V/µs slew rate can preserve short input pulses before conversion, while the -90 dBc distortion specification at 30 MHz limits added harmonics. Input protection, anti-alias filtering, source impedance, and ADC acquisition timing must be evaluated together. A compact layout with very short traces and local decoupling reduces parasitic effects that could otherwise consume the amplifier’s high-frequency performance margin.

Сводка рекомендуемых товаров

THS4062IDR Texas Instruments Используется в: High-Speed Video Signal Conditioning MCP6031-I/SN Low-power amplifier option for lower-frequency filtering stages Используется в: Active Wideband Filtering MCP6021-I/SN Rail-to-rail amplifier option for signal-chain support functions Используется в: Active Wideband Filtering ADF4351BCPZ Analog Devices Используется в: Communication Receiver Front Ends ADF4360-5BCPZ Clock and frequency-generation component for high-speed systems Используется в: Communication Receiver Front Ends MCP3561RT-I/SN Dedicated current-measurement ADC for digital current-sense systems Используется в: Precision Current-Sense Amplification MCP3562RT-I/SN Delta-sigma ADC option for precision current acquisition Используется в: Precision Current-Sense Amplification MCP3421-E/SS Precision ADC for digitizing instrumentation signals Используется в: Test and Measurement Instrumentation MCP3424-E/SS Multi-channel ADC option for laboratory measurement systems Используется в: Test and Measurement Instrumentation MCP3422A7-E/SN Microchip Technology Используется в: High-Speed Data Acquisition MCP3564RT-E/ST Microchip Technology Используется в: High-Speed Data Acquisition
Where can I buy THS4211DRB online?
The THS4211DRB can be requested through the “Request a Quote” form on this page. The exact orderable device is a Texas Instruments single-channel amplifier in an 8-VSON package with an exposed pad. Because the 3 mm by 3 mm package is compact and pin assignments are application critical, confirm the package code, exposed-pad connection, and assembly requirements before placing an order. The manufacturer product page and datasheet provide the authoritative ordering and application information.
What is the price of THS4211DRB?
The current unit price for THS4211DRB is best obtained through the “Request a Quote” form on this page rather than from static text that may become outdated. Quote requests can also account for the requested quantity, delivery schedule, and source condition. The device identifier used for inquiry should remain THS4211DRB, including its package and reel-ordering suffix, so the quotation matches the intended 8-VSON device.
What is the lead time for THS4211DRB?
Use the “Request a Quote” form on this page to request the current lead time and minimum order quantity for THS4211DRB. Lead time can change with inventory, order volume, and packaging requirements, so it should be confirmed for each quotation. Include the intended delivery date and the required reel quantity in the request. For technical qualification, the Texas Instruments product page and manufacturer datasheet remain the reference for the exact device configuration.
Is THS4211DRB in stock?
Current THS4211DRB availability should be confirmed through the “Request a Quote” form on this page. The form is the appropriate channel for checking stock, allocation, and expected delivery for the exact orderable part. A confirmed listing for THS4211DRBT or a related package should not be treated as confirmation of THS4211DRB inventory. State the required quantity and date clearly so the returned availability information applies to the intended 8-VSON package.
What are the key specifications of THS4211DRB that engineers should know?
The THS4211DRB is a unity-gain-stable, single-channel voltage-feedback operational amplifier with 1 GHz bandwidth and a 970 V/µs slew rate. According to the Texas Instruments manufacturer datasheet, it operates from 5 V to 15 V, provides 200 mA output drive, and achieves -90 dBc third-harmonic distortion at 30 MHz. The device is offered in an 8-VSON package with an exposed pad and a 3 mm by 3 mm body, making it suitable for compact, high-speed signal-conditioning circuits.
What is the operating voltage of THS4211DRB?
The THS4211DRB operates from 5 V to 15 V. According to the Texas Instruments manufacturer datasheet, this range supports single-supply and split-supply implementations, subject to the input and output common-mode limits. The nominal operating range is typically shown as ±7.5 V or 15 V total. Keep the input, output, and shutdown-pin voltages within their specified limits and account for supply headroom when driving large signals at high frequency.
What is the bandwidth and slew rate of THS4211DRB?
The THS4211DRB provides 1 GHz small-signal bandwidth and a 970 V/µs slew rate. According to the Texas Instruments manufacturer datasheet, the combination supports faithful reproduction of high-frequency waveforms without requiring a decompensated amplifier configuration. Because large-signal bandwidth and closed-loop gain can constrain usable bandwidth, evaluate the gain, feedback values, load, and output amplitude together. The stated 130 MHz bandwidth at 0.1 dB is another useful reference for flat-response requirements.
What is the difference between THS4211DRB and THS4215?
The THS4211 and THS4215 share the same core high-speed, low-distortion amplifier performance, but the THS4215 adds power-down capability. According to the Texas Instruments manufacturer datasheet, the THS4215 is the family member designed for applications that benefit from shutdown control. The available cross-reference information does not establish a THS4215 orderable code in the identical 8-VSON footprint, so the shutdown function and exact pinout must be checked before treating it as a replacement.
Is THS4211DRB suitable for video and high-speed analog signal conditioning?
Yes, the THS4211DRB is suitable for high-speed video and analog signal-conditioning circuits. Its 1 GHz bandwidth, 970 V/µs slew rate, and -90 dBc third-harmonic distortion at 30 MHz support wideband amplification with low added distortion. According to the Texas Instruments manufacturer datasheet, 130 MHz bandwidth is available with only 0.1 dB variation. The device can operate at unity gain, and its 200 mA output-drive capability helps preserve edge fidelity into suitable loads.
When should I choose THS4211DRB instead of a lower-speed amplifier?
Choose THS4211DRB when the signal path requires substantially more bandwidth or slew rate than a general-purpose amplifier can provide. Its 1 GHz bandwidth and 970 V/µs slew rate are valuable for video edges, active filtering, waveform generation, and instrumentation where the original signal spectrum extends to high frequencies. Conversely, a lower-speed amplifier may be preferable for slow analog signals when lower cost, lower power, or lower noise is more important than high-speed edge performance.
What can replace THS4211DRB?
A replacement for THS4211DRB must match its 8-VSON 3 mm by 3 mm footprint, pin assignments, supply range, bandwidth, slew rate, output drive, and stability configuration. The available manufacturer and cross-reference listings identify related order codes, but they do not establish five distinct same-package, pin-to-pin devices. Therefore, no alternative is presented as a qualified drop-in replacement without a complete footprint and electrical comparison. Review the Texas Instruments manufacturer datasheet before approving any substitute.
What is the best cross-brand equivalent for THS4211DRB?
No cross-brand equivalent is presented as a drop-in replacement because the available cross-reference information does not verify a competitor part with the same pinout, 3 mm by 3 mm VSON footprint, and electrical ratings. Similar bandwidth or slew rate alone is insufficient for drop-in approval. A candidate should be checked for supply range, input and output common-mode limits, output-current capability, exposed-pad connection, stability, and temperature grade. Use the manufacturer pinout and application circuit as the comparison baseline.
Where can I download the THS4211DRB datasheet PDF?
The official THS4211DRB datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ths4211.pdf. According to the manufacturer datasheet, the document covers the THS4211 and THS4215 low-distortion, high-speed voltage-feedback amplifier family. Use the ordering-information and pin-description sections to verify the exact THS4211DRB package. The official manufacturer product page at https://www.ti.com/product/THS4211 provides complementary ordering and support information.
Where can I find the THS4211DRB pinout?
The THS4211DRB pin assignment is shown in the pin-description section of the official Texas Instruments manufacturer datasheet. The component uses an 8-VSON package with an exposed pad, so the exposed-pad connection and its relationship to pins 1 through 8 must be followed exactly during PCB layout. Do not infer a pinout from a visually similar amplifier, and do not treat related family codes as automatically interchangeable without comparing their tables.
Does THS4211DRB need special PCB layout and thermal handling?
Yes, the THS4211DRB benefits from short, low-inductance signal paths and careful exposed-pad thermal management. According to the Texas Instruments manufacturer datasheet, the device is a 1 GHz, 970 V/µs amplifier in a compact 8-VSON package. Place decoupling capacitors at the supply pins, keep feedback loops small, route ground returns directly to the exposed pad, and provide multiple thermal-via connections. Validate the final layout with eye and impedance measurements when signal integrity is critical.

Справочные инженерные данные для THS4211DRB — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the THS4211DRB when the design needs a unity-gain-stable, single-channel amplifier with 1 GHz bandwidth, 970 V/µs slew rate, and strong output-drive capability in an 8-VSON package. It is particularly appropriate for video conditioning, wideband active filters, current-sense amplification, communications front ends, instrumentation, and high-speed data acquisition. Its exposed-pad construction demands careful thermal planning and low-inductance PCB layout. If the signal path operates at low frequency and prioritizes minimum power or lower cost, a general-purpose amplifier may be more efficient. Before substituting another device, require an exact 3 mm by 3 mm footprint, pin-for-pin mapping, exposed-pad arrangement, supply compatibility, and equivalent bandwidth, slew rate, distortion, output drive, and stability. Related THS4211 package variants and the shutdown-capable THS4215 should not be assumed to be drop-in replacements.

Сравнение с аналогами

Параметр Этот товар
Package 8-VSON with exposed pad, 3 mm × 3 mm
Brand Texas Instruments
Amplifier Type Voltage-feedback operational amplifier
Number of Circuits 1 circuit
Small-Signal Bandwidth 1 GHz
Slew Rate 970 V/µs
Supply Voltage Range 5 V to 15 V
Output Drive Current 200 mA
Third-Harmonic Distortion -90 dBc at 30 MHz
Gain Stability Unity-gain stable

Ключевые отличия

  • Combines very high bandwidth with strong large-signal capability (против General-purpose low-speed operational amplifiers)
  • Maintains stable operation at unity gain (против Decompensated high-speed amplifiers)
  • Provides low distortion for high-frequency signal paths (против General-purpose amplifiers used for video conditioning)

Заметки по проектированию

Place input, output, and feedback components directly adjacent to the THS4211DRB pins. Keep the feedback loop physically small and route the non-inverting and inverting traces away from supply and output-current paths. At 1 GHz bandwidth, even a short return loop can introduce phase error or instability. Use a continuous ground plane beneath the device, connect the exposed pad with several short thermal vias, and avoid placing test pads or routing discontinuities within the high-speed signal path.

Use the exposed pad as the principal thermal path for the 8-VSON package. The 200 mA output-drive capability can increase dissipation during large-signal operation, while the compact 3 mm by 3 mm body limits passive heat spreading. Estimated thermal design should be based on the actual supply voltage, output swing, load, duty cycle, and ambient temperature. Validate the result with temperature-rise measurement because copper area, via count, adjacent components, and board construction can materially change junction temperature.

Do not assume that any related THS4211 order code is a drop-in replacement. Verify the 8-VSON dimensions, pin numbering, exposed-pad connection, shutdown function, supply limits, and common-mode range in the Texas Instruments manufacturer datasheet. In particular, the THS4215 adds power-down capability, while SOIC and other package options are not mechanically interchangeable. Also check whether the circuit operates at unity gain, where the specified stability is directly useful, or at a closed-loop gain requiring separate stability and bandwidth review.

Terminate and simulate the complete output path because capacitive loading can change the apparent bandwidth, slew behavior, and stability of a 1 GHz amplifier. Keep cable or connector structures away from the device, use controlled impedance routing, and add source or isolation resistors when a downstream load otherwise presents excessive capacitance. Use an oscilloscope bandwidth and probe method that do not obscure the edge being measured; otherwise, probe and instrument loading can be mistaken for THS4211DRB distortion.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance attributes are not explicitly identified in the product-page excerpts or distributor listings. Verify current declarations using the Texas Instruments product page and manufacturer documentation.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

THS4211DRB datasheet THS4211DRB datasheet pdf THS4211DRB pinout THS4211DRB specifications THS4211DRB equivalent THS4211DRB replacement THS4211DRB cross reference THS4211DRB price THS4211DRB stock Texas Instruments THS4211DRB THS4211 1 GHz operational amplifier THS4211 970 V/us amplifier THS4211 8-VSON footprint THS4211 video amplifier application THS4211DRB vs THS4211DRBT

Связанные компоненты & термины

Texas Instruments THS4211DRB THS4211 THS4215 THS4062IDR operational amplifier voltage-feedback amplifier high-speed amplifier signal-conditioning IC unity-gain stable small-signal bandwidth slew rate third-harmonic distortion differential gain 8-VSON VSON family QFN family surface-mount package exposed pad high-speed video active filter current-sense amplifier data acquisition test and measurement instrumentation feedback network
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ