TLV2334ID - 4-Channel Low-Power Op Amp | Texas Instruments
Артикул: TLV2334ID ✗ Снят с производстваTLV2334ID Обзор
An operational amplifier, commonly called an op amp, is an active semiconductor device that uses high-gain differential amplification to improve the gain, input impedance, and output-drive capability of a feedback circuit. Within the broader hierarchy, the TLV2334ID belongs to the operational amplifier, analog amplifier IC, and signal-conditioning IC categories. Its four channels allow compact designs to process multiple independent analog signals without using separate single-amplifier packages.
Key characteristics include a 300 kHz gain-bandwidth product, approximately 1.1 mV input offset voltage, four amplifier circuits, and operation from a single 3 V or 5 V supply. The 8 V maximum supply supports low-voltage portable equipment, industrial controls, sensor interfaces, and general-purpose analog conditioning. The common-mode range extending below the negative rail is particularly useful when the signal approaches ground.
The TLV2334ID is based on a complementary metal-oxide-semiconductor operational-amplifier design intended for low-voltage operation. Its approximately 300 kHz bandwidth is appropriate for moderate-frequency signal conditioning rather than high-speed video or precision instrumentation. The low-voltage supply capability also simplifies battery-powered designs, although input and output swing limits must be checked against the signal being conditioned.
Typical uses include four-channel sensor interfaces, low-voltage audio and control circuits, instrumentation amplifiers, active filters, comparators with added hysteresis, and general-purpose analog buffers. Because the package contains four amplifiers, channel-to-channel matching is useful when several related low-frequency signals must be processed in one circuit.
When designing a PCB around the TLV2334ID, place input, output, feedback, and decoupling components close to the relevant pins. Use a local supply bypass capacitor on each supply rail and provide a stable, low-impedance ground return. Check input common-mode voltage and output swing before operating near the supply limits; an amplifier can remain powered while its usable input or output range is restricted.
This product page combines the exact catalog attributes and datasheet-search references for the TLV2334ID with practical guidance for supply bypassing, signal conditioning, PCB layout, and drop-in replacement evaluation. It distinguishes confirmed catalog facts from electrical parameters that require review in the manufacturer datasheet before design release.
Аналоги без доработки для TLV2334ID — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с TLV2334ID (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Gain-Bandwidth Product, Maximum Supply Voltage, Package.
TLV2374IDR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TLV2374ID
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TLV2372ID
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →TLV2372IDR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TLV2334IP
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TLV2334ID Максимальные параметры и электрические характеристики
| Amplifier Type | General-purpose operational amplifier |
| Number of Circuits | 4 circuits |
| Number of Amplifiers | 4 amplifiers |
| Maximum Supply Voltage | 8 V |
| Single-Supply Operation | 3 V and 5 V |
| Gain-Bandwidth Product | 300 kHz |
| Input Offset Voltage | 1.1 mV |
| Common-Mode Input Range | Extends below the negative rail and up to VDD |
| Диапазон выходного напряжения | Includes negative values |
| Корпус | 14-pin SOIC |
| Package Body Width | 3.90 mm |
| Package Length | 0.154 inch (3.90 mm) width class |
| Тип монтажа | Surface mount |
| Process Technology | LinCMOS |
Руководство по цоколевке TLV2334ID в корпусе 0.154 inch (3.90 mm) width class
Цоколевка для TLV2334ID (корпус 0.154 inch (3.90 mm) width class). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для TLV2334ID.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
TLV2334ID подходит для 6 применениеs: Low-Voltage Sensor Signal Conditioning, Industrial Control and Instrumentation, Battery-Powered Portable Equipment, Active Audio and Low-Frequency Filters, Data Acquisition and Analog Front Ends, Power and Motor Control Interfaces.
Low-Voltage Sensor Signal Conditioning
The TLV2334ID fits four-channel sensor-conditioning systems that operate from 3 V or 5 V. Its common-mode input range extends below the negative supply rail, which is valuable when sensor outputs remain near ground. The four amplifiers can buffer or amplify separate inputs without requiring four single-channel packages, while the 300 kHz gain-bandwidth product suits moderate-frequency sensors. Designers should verify the input offset voltage of approximately 1.1 mV against the sensor accuracy requirement and confirm output swing for the selected supply.
Рекомендуется
Industrial Control and Instrumentation
The TLV2334ID can implement low-voltage amplification, buffering, and active filtering in industrial control boards. Its 3 V and 5 V single-supply operation supports compact controller subsystems, and the common-mode range extending below the negative rail helps process signals near ground. Four independent channels reduce board area when several control or measurement signals are present. The 300 kHz bandwidth is appropriate for many low-frequency loops, but loop stability, noise, and output-drive requirements should be checked against the specific control topology.
Рекомендуется
Battery-Powered Portable Equipment
For battery-powered portable equipment, the TLV2334ID provides four general-purpose amplifier channels from a 3 V or 5 V supply. Its low-voltage operation aligns with energy-conscious designs, and its ability to accept common-mode signals below the negative rail is useful near the bottom of the supply range. The approximately 1.1 mV input offset voltage may dominate accuracy in high-gain sensor paths, so select resistor and gain values accordingly. Confirm output swing and quiescent current in the manufacturer datasheet before finalizing a power budget.
Рекомендуется
Active Audio and Low-Frequency Filters
The TLV2334ID can form active filters, channel equalizers, or low-frequency audio-control paths in compact analog boards. Its 300 kHz gain-bandwidth product provides useful bandwidth for moderate-frequency filters, while four channels allow related stereo or multi-axis signal paths to share one package. Common-mode input operation below the negative rail can simplify circuits centered around ground. Check the required filter-Q network, output drive, and output-voltage swing against the 3 V or 5 V supply to avoid clipping near the rail.
Рекомендуется
Data Acquisition and Analog Front Ends
The TLV2334ID is suitable for front-end stages in compact data-acquisition systems requiring several low-frequency channels. It can buffer sensor outputs, amplify small signals, and participate in active anti-alias or smoothing filters. The approximately 1.1 mV input offset voltage is important for calibration budgets, while the common-mode range extending below the negative rail helps accommodate near-ground inputs. Verify input capacitance, noise, settling behavior, and output swing in the manufacturer datasheet before sampling at the highest planned rate.
Рекомендуется
Power and Motor Control Interfaces
The TLV2334ID can serve as an interface amplifier in low-voltage power-control or motor-control subsystems where several command or feedback signals require conditioning. Its 3 V and 5 V supply operation can align with controller logic rails, and four channels provide flexible signal routing. The common-mode input range below the negative rail is useful for bipolar command signals referenced to ground. The design must remain within the confirmed 8 V maximum supply and must verify output swing, slew rate, capacitive-load behavior, and protection against transient industrial signals.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TLV2334ID — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TLV2374IDR | TLV2374ID | TLV2372ID | TLV2372IDR | TLV2334IP |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin SOIC | 14-pin SOIC - same | 14-pin SOIC - same | 14-pin SOIC - same | 14-pin SOIC - same | 14-pin SOIC - same |
Ключевые отличия
- Four amplifier channels in one 14-pin SOIC (против TLV2374IDR)
- Confirmed low-voltage operating points (против TLV2372IDR)
- Near-ground common-mode signal support (против TLV2372ID)
Заметки по проектированию
Route each feedback network directly between its corresponding amplifier output and inverting-input pin. Keep the non-inverting input and feedback components away from switching nodes and high-current return paths. Because the TLV2334ID contains four amplifiers in one 14-pin SOIC, placing the unused channels in a stable configuration, such as a non-inverting unity-gain connection with suitable input biasing, can reduce sensitivity to unused-channel behavior.
Place the supply bypass capacitor close to the package power pin and connect it to a low-impedance ground plane. The confirmed operating points are 3 V and 5 V single supply, with an 8 V maximum supply, but the manufacturer datasheet must be consulted for absolute maximum conditions, quiescent current, and output current. Decouple any sensitive analog supply locally and keep the return current from sensors, filters, and ADC inputs out of the same high-current path.
Do not assume that operation below the negative rail applies to every input condition. The common-mode range extends below the negative rail, but output swing, slew rate, input capacitance, and stability into the selected load remain separate constraints. Use the manufacturer characteristic curves to verify the complete signal path, especially for high-gain configurations, capacitive loads, and signals approaching either supply rail.
Информация о соответствии
The available catalog and datasheet-search data do not state a definitive compliance status. Check the current manufacturer product page and material declaration before release.