Texas Instruments

TLV2460CP - 6.4MHz RRIO Op Amp with Shutdown | TI

Артикул: TLV2460CP ✓ Активен
6 V Vdss 8-pin PDIP Package
MOQ: 1 |

TLV2460CP Обзор

Texas Instruments TLV2460CP is a single, low-power, rail-to-rail input/output operational amplifier with shutdown, 6.4 MHz gain-bandwidth product, and a 6 V maximum supply rating. The device is packaged in an 8-pin PDIP and is intended for portable instrumentation, buffering, and general-purpose signal-conditioning systems.

An operational amplifier is an analog integrated circuit that uses high-gain feedback to amplify a differential input voltage. The TLV2460CP belongs to the rail-to-rail input/output amplifier category, allowing its input and output operation to extend toward the supply rails. Within the broader hierarchy, it is an operational amplifier, analog amplifier IC, and signal-conditioning semiconductor designed for low-voltage systems.

The TLV2460CP combines a single amplifier with rail-to-rail input and output capability, a 6.4 MHz gain-bandwidth product, and shutdown support. Its shutdown control can place the amplifier in a low-power state when signal processing is not required, helping reduce system consumption in portable equipment. The device is identified as a single 6 V, 6.4 MHz RRIO amplifier with shutdown by the Texas Instruments product page.

Its rail-to-rail input characteristic is important for signal sources whose voltage swings approach either supply rail, while rail-to-rail output improves voltage headroom when driving a load at low supply voltages. The 6.4 MHz bandwidth supports applications requiring higher closed-loop bandwidth than a general-purpose low-frequency amplifier, although stable operation still depends on the selected feedback topology, noise gain, output loading, and compensation network.

Typical uses include low-voltage sensor conditioning, portable test equipment, audio and communication signal paths, instrumentation buffering, and active filtering. The shutdown function is useful in battery-powered or intermittently operated systems where the amplifier must be disabled between measurement intervals. Rail-to-rail operation also makes the device applicable to systems in which the signal range occupies a substantial portion of the available supply voltage.

Designers should verify the shutdown-pin polarity, input common-mode limits, output swing, stability requirements, and recommended capacitor values in the manufacturer datasheet before finalizing a PCB. Because this is an 8-pin PDIP rather than a surface-mount package, it is best suited to designs that prioritize easy inspection, prototyping, or through-hole assembly over compact board area.

This page organizes the TLV2460CP identity, package, verified electrical highlights, sourcing questions, compatible family options, comparison parameters, and practical design guidance into one engineering reference. It also distinguishes confirmed manufacturer information from characteristics that require confirmation in the complete datasheet before production release.

Аналоги без доработки для TLV2460CP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с TLV2460CP (тот же форм-фактор и посадочное место).

TLV2460CPE4

✅ Прямая замена
📦 8-pin PDIP
Same 8-pin PDIP family configuration; TLV2460CPE4 carries a different ordering and temperature-grade suffix, with the exact allowable operating-temperature limits requiring datasheet confirmation.

📋 Справочный аналог (нет в каталоге)

TLV2460IPE4

✅ Прямая замена
📦 8-pin PDIP
Same 8-pin PDIP family configuration; TLV2460IPE4 uses a different industrial-grade ordering code, with supply range and temperature limits requiring comparison against TLV2460CP.

📋 Справочный аналог (нет в каталоге)

TLV2460IP

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 8-pin PDIP
1 channel · Single operational amplifier · 6 V · 6.4 MHz · 1.6 V/us · 14 nA · 500 uV · Rail-to-rail

Уточнить цену

Открыть даташит →

TLV2460CP Максимальные параметры и электрические характеристики

Amplifier Type Single operational amplifier
Technology CMOS
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 6.4 MHz
Input Common-Mode Behavior Rail-to-rail input
Output Swing Behavior Rail-to-rail output
Shutdown Support Yes
Low-Power Classification Low-power operational amplifier
Number of Circuits 1 circuit
Package Type 8-pin PDIP
Число выводов 8 pins
Способ монтажа Through-hole
Product Classification General-purpose amplifier

Руководство по цоколевке TLV2460CP в корпусе 8-pin pdip

Цоколевка для TLV2460CP (корпус 8-pin pdip). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-pin pdip для TLV2460CP

Нет подробных данных о распиновке для TLV2460CP.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TLV2460CP подходит для 6 применениеs: Portable Sensor Signal Conditioning, Low-Voltage Instrumentation Buffering, Battery-Powered Monitoring System, Active Filter and Frequency Response Circuit, Audio and Communication Interface, Test and Measurement Front End.

🧩

Portable Sensor Signal Conditioning

The TLV2460CP is suitable for conditioning low-voltage sensor signals in portable measurement equipment because its rail-to-rail input and output behavior reduces signal loss near the supply rails. With a 6.4 MHz gain-bandwidth product, the amplifier can support higher-bandwidth sensing paths than a low-frequency general-purpose device while remaining classified as low-power. The shutdown pin can disable the amplifier between acquisition intervals, reducing system activity when measurements are not continuously required. Place the signal source close to the amplifier input, maintain short feedback paths, and verify the complete common-mode range for the selected supply voltage. The 8-pin PDIP package also simplifies probing and rework in prototype instrumentation.

🏭

Low-Voltage Instrumentation Buffering

The TLV2460CP can buffer sensor, transducer, or divider outputs in low-voltage instrumentation where the signal needs to drive a following measurement stage. Rail-to-rail input operation preserves available dynamic range, while rail-to-rail output maximizes swing into the next amplifier or converter stage. Its 6.4 MHz gain-bandwidth product gives the design more closed-loop bandwidth potential than a unity-gain-stable low-frequency op amp. The single-amplifier configuration also permits a dedicated signal channel where noise and layout isolation matter. Designers should check output loading, input bias-current error, noise gain, and stability with the specific feedback network before release, particularly when driving capacitive inputs or long routed signals.

⚡

Battery-Powered Monitoring System

The TLV2460CP fits battery-powered monitoring systems that require rail-to-rail signal operation and controlled amplifier activity. Its low-power design is complemented by a shutdown function, allowing the amplifier to be disabled when the system is idle and enabled for measurement or alarm evaluation. Rail-to-rail input and output characteristics are useful because low-voltage battery systems often operate signals close to their available supply range. The 6 V maximum supply rating permits use in sub-6 V systems, although the actual minimum and maximum operating voltages must be confirmed. A practical implementation should account for shutdown timing, input transients during wake-up, and the quiescent-current contribution of the complete analog signal chain.

📡

Active Filter and Frequency Response Circuit

The TLV2460CP can serve as the active element in a low-voltage filter or frequency-response circuit because its 6.4 MHz gain-bandwidth product provides substantial bandwidth for signal shaping. Rail-to-rail operation helps preserve signal range in compact systems, and shutdown can disable the active path when filtering is unnecessary. The actual usable bandwidth depends on the closed-loop topology, noise gain, component tolerances, and the stability recommendations in the manufacturer datasheet. Use short PCB traces around the feedback network, keep sensitive input nodes away from switching nodes, and include suitable input and output bypassing. Prototype the frequency response across the intended load because capacitive loading can alter stability and attenuation.

🎧

Audio and Communication Interface

The TLV2460CP can amplify low-level signals in portable audio or communication interfaces where rail-to-rail operation is valuable. Its 6.4 MHz gain-bandwidth product is suitable for signal paths extending well beyond baseband audio frequencies, while the shutdown pin can control amplifier state in intermittently active systems. The through-hole PDIP package is convenient for bench prototypes and educational equipment where component accessibility and straightforward rework are important. Confirm input and output swing at the intended load, check distortion and output-current capability, and ensure the selected gain and feedback network remain stable. A ground-return path directly under the device should be used to reduce noise pickup and maintain predictable analog performance.

🔧

Test and Measurement Front End

The TLV2460CP is applicable to the input front end of low-voltage test and measurement equipment where a general-purpose rail-to-rail amplifier is needed. The single amplifier can condition a probe, attenuator, or diagnostic signal before conversion or comparison, while the 6.4 MHz gain-bandwidth product supports higher-frequency measurements than a slow precision amplifier. Rail-to-rail input and output operation helps use the available signal range, and shutdown is useful in repeated or gated measurement architectures. Designers should establish probe capacitance, source impedance, noise gain, and settling requirements before selecting compensation values. Keep the input path short, use a quiet ground reference, and verify that shutdown transitions do not create unacceptable settling time for the test sequence.

Сводка рекомендуемых товаров

TLV2460IPE4 Same-family low-power RRIO amplifier option Используется в: Portable Sensor Signal Conditioning, Active Filter and Frequency Response Circuit, Audio and Communication Interface, Test and Measurement Front End TLV2460AIDR Same-family amplifier in a surface-mount package Используется в: Portable Sensor Signal Conditioning, Active Filter and Frequency Response Circuit, Test and Measurement Front End TLV2460CPE4 Same-family 8-pin PDIP amplifier option Используется в: Low-Voltage Instrumentation Buffering, Battery-Powered Monitoring System, Audio and Communication Interface INA149AIDR Texas Instruments Используется в: Low-Voltage Instrumentation Buffering TLV2460IP Texas Instruments Используется в: Battery-Powered Monitoring System
What is the TLV2460CP?
The TLV2460CP is a single, low-power, rail-to-rail input/output CMOS operational amplifier with shutdown. According to the Texas Instruments product page, it supports supply operation up to 6 V and has a 6.4 MHz gain-bandwidth product. The device is offered in an 8-pin PDIP package for through-hole instrumentation, buffering, portable measurement, and general-purpose signal-conditioning applications.
What is the bandwidth of the TLV2460CP?
The TLV2460CP has a 6.4 MHz gain-bandwidth product. According to the Texas Instruments TLV2460 product page, this bandwidth is a key characteristic of the single-amplifier TLV2460 family. Actual closed-loop bandwidth also depends on the feedback configuration, noise gain, and the stability network selected for the intended circuit.
Does the TLV2460CP have rail-to-rail input and output?
Yes, the TLV2460CP provides rail-to-rail input and rail-to-rail output operation. According to the Texas Instruments product description, these characteristics allow low-voltage signals near the supply rails to be processed with improved dynamic range and give the output more usable voltage swing than a conventional amplifier restricted to a narrower common-mode or output range.
What is the maximum supply voltage of the TLV2460CP?
The maximum rated supply voltage of the TLV2460CP is 6 V. According to the Texas Instruments product page, the TLV2460 is a single 6 V operational amplifier. Systems should also maintain the complete operating supply range and absolute maximum ratings stated in the manufacturer datasheet rather than treating 6 V as an unrestricted operating condition.
Where can I download the TLV2460CP datasheet PDF?
The official TLV2460CP documentation is available through the Texas Instruments TLV2460 product page at https://www.ti.com/product/TLV2460. The TLV2460CP ordering table identifies the device as a single, 6 V, 6.4 MHz RRIO amplifier with shutdown in an 8-pin PDIP package. Use the datasheet and pin-description table for final electrical limits, shutdown behavior, and application details.
Where can I find the TLV2460CP pinout?
The TLV2460CP pin assignment is documented in the Texas Instruments TLV2460 datasheet under the package pinout and pin-description sections. The verified ordering information identifies an 8-pin PDIP configuration. Because a complete numbered pin list is not present in the manufacturer page excerpt, use the datasheet diagram before assigning signal, shutdown, and supply connections on the PCB.
Where can I buy the TLV2460CP online?
The TLV2460CP can be requested through the Request a Quote form on this product page. The form is the appropriate channel for checking current unit availability, order quantities, and lead time without relying on stale listing information. The manufacturer identifies TLV2460CP as an 8-pin PDIP single operational amplifier with a 6.4 MHz gain-bandwidth product.
What is the current price of the TLV2460CP?
The current TLV2460CP price should be requested through the Request a Quote form on this page. Quote requests allow the exact PDIP ordering code, quantity, and required delivery schedule to be checked together. The product is confirmed as a Texas Instruments single 6 V, 6.4 MHz rail-to-rail input/output operational amplifier with shutdown.
What is the lead time for the TLV2460CP?
The current TLV2460CP lead time should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, packaging, and inventory conditions, so a request that includes the required quantity and target delivery date gives the most useful response. The confirmed device format is the Texas Instruments 8-pin PDIP version.
Is the TLV2460CP in stock?
Current TLV2460CP stock should be checked through the Request a Quote form on this page. The form connects the inquiry with the exact manufacturer ordering code and requested quantity, avoiding an ambiguous match to a different package or temperature grade. The verified product identity is the 8-pin PDIP TLV2460CP single amplifier.
What is the best drop-in replacement for the TLV2460CP?
TLV2460CPE4 and TLV2460IPE4 are the closest same-brand, 8-pin PDIP family options identified for replacement evaluation. Their manufacturer suffix differences represent ordering and temperature-grade choices, so engineers must confirm the exact electrical limits and shutdown behavior in each datasheet. No equivalent cross-brand device was confirmed as pin-compatible, making a board-level substitution premature.
Can TLV2460IPE4 replace TLV2460CP?
TLV2460IPE4 can serve as a candidate replacement for the TLV2460CP because it is identified as an operating-amplifier family option associated with the same 8-pin PDIP format. It is not a guaranteed substitute without checking temperature grade, absolute maximum ratings, supply range, and shutdown-pin specifications. Confirm those points against both manufacturer datasheets before approving a production change.
TLV2460CP vs TLV2460CPE4: which is better for instrumentation?
TLV2460CPE4 is the stronger candidate for industrial instrumentation when its specified temperature grade and electrical limits satisfy the enclosure requirements. The TLV2460CP remains appropriate for standard commercial or industrial conditions covered by its own ratings. Both belong to the same low-power, 6.4 MHz RRIO family, but the exact ordering code should be selected from its datasheet rather than assumed interchangeable.
When should I choose TLV2460CP over TLV2460IPE4?
Choose the TLV2460CP when its specified operating-temperature and electrical ratings cover the intended application and the exact TLV2460CP ordering code is required for qualification. Choose TLV2460IPE4 when its documented temperature range and grade better match the operating environment. Both use an 8-pin PDIP form, but procurement, qualification, and traceability requirements may favor one ordering code over the other.
What are the key specifications of TLV2460CP that engineers should know?
The key confirmed specifications are: one amplifier, a 6 V maximum supply rating, 6.4 MHz gain-bandwidth product, rail-to-rail input and output behavior, shutdown support, and an 8-pin PDIP package. According to the Texas Instruments product page, the device is a low-power CMOS operational amplifier designed for portable applications. Confirm offset, bias current, noise, slew rate, and thermal limits in the complete manufacturer datasheet.
Is there a cross-brand equivalent for the TLV2460CP?
No cross-brand drop-in equivalent was confirmed for the TLV2460CP. The available cross-reference results do not establish that a competitor device has the same 8-pin PDIP pin assignment, shutdown function, rail-to-rail behavior, and 6.4 MHz bandwidth. Use the TI family options for initial design review, and validate any proposed competitor against the complete datasheet rather than relying only on headline bandwidth or supply-voltage ratings.

Справочные инженерные данные для TLV2460CP — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the TLV2460CP when the design needs a single low-power operational amplifier with rail-to-rail input and output behavior, a 6.4 MHz gain-bandwidth product, shutdown, and an 8-pin PDIP footprint. It is a practical choice for portable instrumentation, signal buffering, and prototypes where through-hole accessibility is valuable. Consider TLV2460CPE4 when its documented temperature grade matches the industrial requirements of the installation, and consider TLV2460IPE4 when its operating-temperature specification provides a better environmental match. TLV2460IP is another same-family PDIP ordering candidate, but its exact limits should be checked against the production requirements. Avoid changing to a surface-mount family option merely for compactness unless the PCB is redesigned and the complete electrical specification is confirmed. No cross-brand drop-in substitute was validated, so an existing PCB should remain with a confirmed PDIP-family option until pinout and performance equivalence are demonstrated.

Сравнение с аналогами

Параметр Этот товар TLV2460CPE4 TLV2460IPE4 TLV2460IP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Amplifier Type Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier

Ключевые отличия

  • Confirmed single-amplifier RRIO configuration (против TLV2460CPE4)
  • Shutdown-capable low-voltage signal conditioning (против TLV2460IPE4)
  • Through-hole package supports accessible prototyping (против TLV2460AIDR)

Заметки по проектированию

Route input, feedback, output, and shutdown connections as short as practical, especially when the closed-loop gain is high. Place the input and output bypass capacitors at their corresponding supply pins rather than at a distant common capacitor. For the 8-pin PDIP, use a ground plane beneath the device and minimize copper-trace resistance between the amplifier and its bypass network. This is particularly important for rail-to-rail designs because supply and ground paths carry signal currents.

Treat the amplifier input as a high-impedance, high-gain node: avoid long parallel traces, test pads, and nearby switching signals unless their effects have been evaluated. If driving a cable, ADC input, or other capacitive load, confirm stability using the manufacturer recommendations and the actual load capacitance. The 6.4 MHz gain-bandwidth product provides response capability, but stable closed-loop operation still depends on noise gain and output loading.

Verify the shutdown-control polarity and state timing in the manufacturer datasheet before connecting it to a system enable signal. A floating or incorrectly driven shutdown node could leave the amplifier enabled or prevent normal operation. During startup, allow the analog supply to stabilize before sampling the output, and determine whether the sensor or source impedance can inject a transient during wake-up. The complete analog chain should be evaluated for quiescent-current and active-current impact.

Do not select a replacement solely from the 6.4 MHz bandwidth or 6 V supply rating. Compare the complete pin description, shutdown polarity, input common-mode range, output swing, offset voltage, bias current, noise, slew rate, output-current capability, operating-temperature range, and package-specific recommendations. When changing from TLV2460CP to another family ordering code, preserve the PCB footprint and verify that the revised grade covers the required environmental conditions.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance attributes were not stated in the manufacturer or distributor page excerpts. The 8-pin PDIP package is leaded in construction, but lead-free and halogen-free status require confirmation from the manufacturer ordering information.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TLV2460CP datasheet TLV2460CP datasheet pdf TLV2460CP pinout TLV2460CP pin configuration TLV2460CP application circuit TLV2460CP equivalent TLV2460CP replacement TLV2460CP cross reference TLV2460CP vs TLV2460IPE4 TLV2460CP price TLV2460CP stock Texas Instruments TLV2460CP

Связанные компоненты & термины

Texas Instruments TLV2460CP TLV2460CPE4 TLV2460IPE4 TLV2460IP TLV2460AIDR TLV2460 Operational amplifier Single operational amplifier Rail-to-rail input Rail-to-rail output RRIO amplifier Low-power amplifier CMOS Shutdown control Gain-bandwidth product 6.4 MHz 6 V maximum supply voltage 8-pin PDIP DIP package family Through-hole package Surface mount Signal conditioning Instrumentation Active filter
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ