Texas Instruments

TLV2761IP - 500kHz Micropower RRIO Op Amp | Texas Instruments

Артикул: TLV2761IP ✓ Активен
3.6 V Vdss 20 µA Id 8-pin PDIP (P) Package
MOQ: 1 |

TLV2761IP Обзор

The Texas Instruments TLV2761IP is a single 3.6 V, 500 kHz, rail-to-rail input and output operational amplifier in an 8-pin PDIP package. It combines a low 20 µA supply current with rail-to-rail signal handling and is intended for portable, low-power, and general-purpose analog signal-conditioning systems. The device is identified as the I-grade, PDIP-package member of the TLV2761 family.

An operational amplifier, or op amp, is a high-gain analog building block used to amplify, buffer, compare, and filter signals. The TLV2761 belongs to the operational amplifier hierarchy, where its rail-to-rail input and output stages allow signals close to the positive and negative supply rails to be processed more effectively than with a conventional input stage. This makes it useful in sensor interfaces, low-voltage signal chains, and portable instrumentation.

The TLV2761IP operates from a single supply of up to 3.6 V and provides 500 kHz gain-bandwidth performance. Its typical supply current is 20 µA, supporting battery-powered and energy-conscious designs. Rail-to-rail input and output operation extends usable signal range within the supply limits, while the general-purpose amplifier configuration provides a practical solution for low-frequency amplification, buffering, and thresholding functions.

The 8-pin PDIP format supports through-hole construction and is useful for prototypes, educational platforms, manually wired test equipment, and designs that benefit from socketed or easily inspected assemblies. Unlike a surface-mount package, the PDIP outline provides generous spacing between leads, making it easier to access with conventional bench instruments. Care is still required to maintain clean supply grounding and stable feedback networks when the amplifier is installed on a prototyping board.

Typical uses include low-voltage sensor interfaces, current or voltage sensing, portable measurement systems, threshold comparators, audio-level conditioning, and general analog signal buffering. In a battery-powered design, its 20 µA typical supply current is the principal power-budget benefit, although actual system consumption also depends on the operating mode, load, and external network. The 500 kHz bandwidth supports moderate-frequency closed-loop operation rather than high-speed signal processing.

Designers should confirm the minimum and maximum supply voltage, input common-mode limits, output swing, shutdown behavior, and stability requirements from the manufacturer datasheet before finalizing the circuit. Decoupling capacitors should be placed close to the supply pins, and feedback components should be selected with the amplifier's recommended operating region in mind. The PDIP package also requires adequate clearance from nearby conductive parts during soldering and inspection.

This page consolidates the manufacturer product identity, verified package and performance information, pin-document location, purchasing workflow, and engineering considerations into a focused guide. It is designed to help engineers confirm fit, assess application suitability, and plan a replacement review without reducing the TLV2761IP to a distributor listing summary.

Аналоги без доработки для TLV2761IP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с TLV2761IP (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Number of Circuits, Package.

Texas Instruments
Amplifier Type: Single operational amplifier
Number of Circuits: 1 circuit
Package: 8-pin PDIP, 0.300 inch pitch
Сравнить с TLV2761IP →

Для этого товара нет аналогов без доработки.

Запросить аналоги

TLV2761IP Максимальные параметры и электрические характеристики

Product Type Single operational amplifier
Manufacturer Texas Instruments
Maximum Supply Voltage 3.6 V
Gain-Bandwidth Product 500 kHz
Typical Supply Current 20 µA
Typical Output Current 10.2 mA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Number of Circuits 1
Amplifier Type General-purpose rail-to-rail input/output
Supply Type Single supply
Диапазон рабочих температур -40 °C to 85 °C
Корпус 8-pin PDIP (P)
Тип монтажа Through-hole
Тип выхода Rail-to-rail

Руководство по цоколевке TLV2761IP в корпусе 8-pin pdip (p)

Цоколевка для TLV2761IP (корпус 8-pin pdip (p)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-pin pdip (p) для TLV2761IP

Нет подробных данных о распиновке для TLV2761IP.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TLV2761IP подходит для 6 применениеs: Battery-Powered Sensor Interface, Portable Voltage Buffer, Threshold and Comparator Circuit, Low-Level Signal Conditioning, Portable Audio Level Conditioning, Test and Measurement Front Panel.

🔧

Battery-Powered Sensor Interface

The TLV2761IP fits low-voltage sensor front ends because its single-supply operation extends to 3.6 V and its typical supply current is only 20 µA. Place the amplifier in a non-inverting or differential conditioning stage when the sensor output must be amplified before sampling. Rail-to-rail input and output behavior helps use much of the available supply range, while 500 kHz bandwidth supports sensors and measurement rates below the amplifier's useful closed-loop range. Verify the sensor output against the input common-mode limits and include the bypass capacitor close to the supply pins to prevent supply ripple from entering the measurement path.

📱

Portable Voltage Buffer

The TLV2761IP can buffer a divider or sensor voltage in a compact, battery-operated instrument. Its 20 µA typical supply current minimizes amplifier overhead when the source itself is high impedance, and the single 3.6 V maximum operating supply simplifies power architecture. Configure it as a voltage follower when the source can drive the feedback network, or use a non-inverting gain stage when signal scaling is required. The 500 kHz gain-bandwidth product allows moderate closed-loop bandwidth, but the selected resistor values should maintain suitable loop gain and avoid excessive noise amplification.

🏭

Threshold and Comparator Circuit

The TLV2761IP is appropriate for simple threshold detection where one input is driven by a reference and the other by a monitored signal. Rail-to-rail input capability is valuable in a low-voltage system because the input can operate near the supply limits, and the single-amplifier configuration avoids unnecessary power consumption. The device operates from a single supply up to 3.6 V and has a 500 kHz gain-bandwidth product, allowing fast response relative to many low-power general-purpose amplifiers. For a new design, evaluate output saturation, input offset voltage, noise around the threshold, and any need for hysteresis before fixing the switching point.

📡

Low-Level Signal Conditioning

The TLV2761IP can condition low-level analog signals in instrumentation, sensor-conditioning, and educational electronics systems. Its rail-to-rail input stage accepts signals near the supply rails, while its 500 kHz gain-bandwidth product provides sufficient bandwidth for low-frequency and moderate-bandwidth waveforms. The 20 µA typical supply current is especially useful when several amplifier stages operate from a limited energy budget. Use stable feedback resistors, short feedback traces, and a ground reference that remains consistent with the sensor. Offset, input bias current, and output drive should be checked from the datasheet before using the amplifier for high-impedance precision measurements.

🎧

Portable Audio Level Conditioning

The TLV2761IP is suitable for buffering or modest gain stages in low-voltage audio-level monitoring circuits. A 3.6 V maximum supply is convenient for portable systems, and the rail-to-rail output stage can provide useful signal swing into a following ADC or comparator stage. The 500 kHz gain-bandwidth product is adequate for voice-band and general audio-conditioning tasks, but it does not target high-fidelity wideband audio performance. Confirm output-noise specifications, output-current capability, and distortion from the manufacturer datasheet. A local supply bypass capacitor and a quiet ground-return layout are important for avoiding added noise in the audio path.

🖥️

Test and Measurement Front Panel

The 8-pin PDIP package makes the TLV2761IP convenient for test and measurement prototypes that need easy access to input, output, supply, and ground connections. A designer can build a general-purpose gain stage, buffer, or comparator and probe each node with conventional bench equipment. The single-amplifier 3.6 V-class device supports low-voltage portable fixtures, while the 500 kHz bandwidth handles moderate-frequency signals. The through-hole format simplifies rework and socket use, though its larger footprint should be considered in compact instruments. Before installation, verify the manufacturer pin table and ensure the board maintains clean supply decoupling and short feedback paths.

What is the operating voltage of TLV2761IP?
The TLV2761IP is specified for operation from a single supply up to 3.6 V. According to the Texas Instruments product page, the TLV2761 is a single, 3.6 V, 500 kHz, rail-to-rail input and output operational amplifier. Confirm the exact minimum operating voltage in the manufacturer datasheet before designing a rail that may fall below the nominal 1.8 V class of supply.
What are the key specifications of TLV2761IP that engineers should know?
The TLV2761IP combines a 3.6 V maximum single-supply rating, 500 kHz gain-bandwidth product, 20 µA typical supply current, and rail-to-rail input and output operation. It is a single general-purpose amplifier in an 8-pin PDIP package, with a stated operating range of -40 °C to 85 °C. These characteristics position it for low-voltage, low-power analog designs requiring wider signal-range capability than a conventional fixed-range amplifier.
What is the output noise and bandwidth of TLV2761IP?
The confirmed gain-bandwidth product of the TLV2761IP is 500 kHz. Output-noise voltage is not stated in the product listing, so it must be taken from the noise tables in the manufacturer datasheet rather than estimated. The bandwidth figure is useful for preliminary loop and signal-path selection, while final stability and usable bandwidth calculations should use the selected gain, feedback network, load, and output-capacitance conditions.
Where can I download the TLV2761IP datasheet PDF?
The official TLV2761 datasheet and ordering information are available from the Texas Instruments product page at https://www.ti.com/product/TLV2761. The TLV2761IP ordering entry identifies the device as an 8-pin PDIP single amplifier. Use the manufacturer datasheet for the complete pin description, recommended operating conditions, electrical characteristics, and application guidance before assigning PCB connections or calculating design margins.
Where is the pinout for TLV2761IP?
The TLV2761IP pin assignment is documented in the TLV2761 family datasheet linked from the Texas Instruments product page. The exact numbered pin names are not reproduced on the product listing, so use the datasheet pin-description table when routing the 8-pin PDIP footprint. Pay particular attention to supply, ground, input, and output connections because assigning those functional pins by position without the manufacturer table can reverse a signal path.
Is TLV2761IP suitable for battery-powered sensor interfaces?
Yes, the TLV2761IP is suitable for low-power sensor-interface concepts because its typical supply current is only 20 µA and its maximum supply rating is 3.6 V. Rail-to-rail input and output operation can improve utilization of a restricted supply range. The complete sensor signal must still remain inside the input common-mode range, and the chosen sensor output must not overload the amplifier input or require bandwidth beyond the 500 kHz gain-bandwidth product.
What is the best drop-in replacement for TLV2761IP?
The best drop-in replacement must use the same 8-pin PDIP footprint and preserve pin-to-pin function, supply range, input/output range, and operating temperature. No replacement satisfying every drop-in condition is established by the available manufacturer and cross-reference information for this exact package. The TLV9061IDR is mentioned as a possible design choice, but it is not listed here as a drop-in substitute because an equivalent 8-pin PDIP configuration was not confirmed.
Can TLV2761IP be used in an existing through-hole prototype board?
Yes, the TLV2761IP is supplied in an 8-pin PDIP package intended for through-hole mounting. Its leaded format is convenient for prototypes, breadboard-style assemblies, test fixtures, and manually inspected boards. The physical footprint must match the installed 8-pin DIP pattern, and the circuit must comply with the device's 3.6 V maximum supply, rail-to-rail operating limits, and -40 °C to 85 °C temperature range.
TLV2761IP vs TLV9061IDR - which is better for a new design?
The TLV2761IP is the better choice when an existing board requires the 8-pin PDIP footprint and a low-power, 500 kHz, rail-to-rail single amplifier. The TLV9061IDR may suit a new compact design when its package and electrical limits match the system, but it should not be treated as a drop-in replacement without confirming its footprint and pin functions. The comparison depends more on mechanical fit and supply compatibility than on the amplifier category alone.
When should I choose TLV2761IP over a smaller surface-mount amplifier?
Choose the TLV2761IP when a legacy or prototype design uses an 8-pin through-hole footprint, when manual soldering and inspection are important, or when PCB space is not the primary constraint. A smaller surface-mount amplifier is generally preferable for compact production hardware only after its pinout, supply range, bandwidth, stability, and operating-temperature requirements are verified. The PDIP package improves accessibility but occupies more board area.
What is the lead time and stock status for TLV2761IP?
Current stock, lead time, and minimum order quantity should be requested through the Request a Quote form on this page. The product appears in current Texas Instruments ordering information, but that does not by itself establish a purchasable quantity at a particular date. A quote response can confirm lifecycle availability, factory lead time, and the appropriate packaging quantity for the intended build.
Where can I buy TLV2761IP online?
Use the Request a Quote form on this page to request TLV2761IP availability, lead time, and an order response. The form is the appropriate purchasing route for this product page because stock can change faster than published technical content. Provide the required quantity, target package, and any production or traceability requirements when requesting the quotation.
What is the price of TLV2761IP?
The current commercial price of TLV2761IP is obtained through the Request a Quote form on this page. Pricing depends on order quantity, package format, lifecycle availability, and delivery requirements, so a static figure would not reliably represent the current offer. Submit the required quantity and procurement details with the quote request to receive the applicable commercial response.
Does TLV2761IP support rail-to-rail operation?
Yes, the TLV2761IP provides rail-to-rail input and output operation. The Texas Instruments product description identifies the device as a rail-to-rail input and output amplifier, while the ordering listing identifies it as a single general-purpose amplifier. Rail-to-rail capability improves signal utilization in a 3.6 V-class system, but input offset, output swing, and common-mode limits should still be checked against the operating point.
What should I check before replacing TLV2761IP in a 3.3 V circuit?
Check the replacement's 3.3 V compatibility, 3.6 V maximum supply rating, rail-to-rail input and output behavior, 500 kHz bandwidth class, supply current, stability, and -40 °C to 85 °C operating range. A mechanical match alone is insufficient: the footprint must have eight pins with the same numbered functions. Compare noise, offset voltage, output-current capability, and shutdown behavior as well when the new part uses a different amplifier family.

Справочные инженерные данные для TLV2761IP — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the TLV2761IP when the design requires an 8-pin PDIP footprint, a single low-power amplifier, and a supply no higher than 3.6 V. Its 20 µA typical supply current and rail-to-rail input and output stages are useful for compact battery-powered sensor circuits, threshold detectors, and low-level signal conditioners. The 500 kHz gain-bandwidth product also supports moderate-frequency closed-loop work. TLV2761IP is less attractive when board area is critical, a surface-mount package is preferred, or the application needs substantially higher bandwidth, lower noise, greater output current, or lower offset than this general-purpose device provides. Before approving any substitute, verify the physical footprint, numbered pin functions, common-mode range, output swing, supply limits, stability, and temperature grade. Similar rail-to-rail labeling alone does not establish drop-in compatibility.

Сравнение с аналогами

Параметр Этот товар
Brand Texas Instruments
Package 8-pin PDIP (P)
Product Type Single operational amplifier
Maximum Supply Voltage 3.6 V
Gain-Bandwidth Product 500 kHz
Typical Supply Current 20 µA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Operating Temperature Range -40 °C to 85 °C

Ключевые отличия

  • Through-hole accessibility (против TLV9061IDR)
  • Low-power single-amplifier configuration (против TLV2761IP)
  • Rail-to-rail signal handling (против Conventional fixed-common-mode amplifier)

Заметки по проектированию

Place the supply bypass capacitor as close as practical to the power and ground pins, and keep the amplifier ground return close to the device rather than routing it through a noisy analog or digital return path. Use short feedback traces to minimize parasitic coupling. The 8-pin PDIP outline leaves generous lead spacing, but the PCB should still avoid copper or conductive fixtures beneath the package if soldering, cleaning, or high-voltage isolation conditions require clearance.

Budget the TLV2761IP as a 20 µA typical-load component rather than assuming that this is the complete application supply current. The datasheet current depends on operating mode, and external divider or feedback networks can add their own consumption. For a battery-powered design, estimate the average and peak current using the worst resistor values and the amplifier's actual operating state. Keep the supply at or below the 3.6 V maximum rating, including transients from external sources.

Do not infer an exact replacement from the amplifier family or similar bandwidth alone. A true substitution must preserve the 8-pin PDIP footprint, numbered pin functions, supply limits, rail-to-rail behavior, operating-temperature range, and required output capability. Check whether the circuit uses any shutdown function and confirm the replacement's stability with the selected feedback network and load. Also verify offset voltage, input bias current, output noise, and output-current requirements rather than comparing only the 500 kHz bandwidth figure.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance attributes are not stated on the available product listing and require confirmation from the manufacturer product page or ordering documentation.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TLV2761IP datasheet TLV2761IP datasheet pdf TLV2761IP pinout TLV2761IP specifications TLV2761IP 8-PDIP Texas Instruments TLV2761IP TLV2761IP equivalent TLV2761IP replacement TLV2761IP drop-in substitute TLV2761IP price TLV2761IP stock TLV2761IP rail-to-rail op amp

Связанные компоненты & термины

Texas Instruments TLV2761IP TLV2761 TLV9061IDR operational amplifier op amp single-supply amplifier rail-to-rail input rail-to-rail output RRIO amplifier general-purpose amplifier low-dropout linear regulator power management IC semiconductor 500 kHz gain-bandwidth product 20 µA supply current 3.6 V power supply 8-pin PDIP DIP package through-hole technology surface mount sensor interface signal conditioning battery-powered electronics comparator circuit
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ