Texas Instruments

TMS320C25FNA50 - 50MHz Fixed-Point DSP | Texas Instruments

Артикул: TMS320C25FNA50 ✓ Активен
5.00 V Vdss 68-PLCC (24.23 mm x 24.23 mm) Package 50 MHz Speed
MOQ: 1 |

TMS320C25FNA50 Обзор

Texas Instruments TMS320C25FNA50 is a fixed-point digital signal processor operating at 50 MHz in a 68-pin PLCC package measuring 24.23 mm by 24.23 mm. The device belongs to the TMS320C2x family and uses 5.00 V core and I/O supplies. Its primary functions are real-time signal processing, control-algorithm execution, and filtering in equipment where deterministic fixed-point arithmetic and a dedicated DSP architecture are preferable to a general-purpose microcontroller.

A digital signal processor is a specialized semiconductor that executes mathematical operations on sampled signals. Unlike a general-purpose processor, a DSP typically combines a predictable execution model with hardware optimized for multiply-accumulate operations. The TMS320C25FNA50 is identified specifically as a fixed-point DSP, making it relevant to signal-processing systems where integer arithmetic, control loops, filters, and waveform transformations form the core workload.

Texas Instruments describes the TMS320C25 as a second-generation member of the TMS320 family. The associated data sheet is organized into architecture, electrical specifications for NMOS and CMOS implementations, timing diagrams, and mechanical data. For the TMS320C25FNA50, the documented operating clock is 50 MHz, the I/O and core voltage are both 5.00 V, and the package is the 68-pin J-lead PLCC identified by package code QCCJ.

The 68-PLCC package provides a substantial number of external connections for a signal processor operating at 50 MHz. Board design therefore requires careful treatment of clock routing, supply distribution, grounding, and output timing. The J-lead package is also mechanically different from fine-pitch leadless or ball-grid packages, so it should not be substituted with an equivalent device in another footprint without a complete PCB redesign.

Typical engineering uses include industrial digital control, communications signal processing, audio and waveform processing, embedded filtering, and instrumentation. In each case, suitability depends on the legacy TMS320C25 software toolchain, peripheral configuration, memory interface, and the availability of an external clock and power design that satisfies the device requirements. The processor is most appropriate when an existing TMS320C25-based design must be serviced or maintained without changing its architecture.

This page summarizes the manufacturer product information and distinguishes the exact orderable MPN from related TMS320C25 family references. It also highlights procurement, pinout, package, and replacement considerations that are essential when sustaining an older embedded signal-processing platform.

For new designs, evaluate software migration, development-tool availability, long-term sourcing, and controller alternatives before committing to this processor. For an existing design, preserve the TMS320C25FNA50 footprint, verify all supply and timing requirements against the manufacturer data sheet, and confirm that external memory and peripheral interfaces are unchanged before approving any substitution.

Аналоги без доработки для TMS320C25FNA50 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с TMS320C25FNA50 (тот же форм-фактор и посадочное место) — отличается по Processor Type, Clock Frequency, Multiplier, Package, Package Type.

Texas Instruments
Processor Type: Second-generation fixed-point digital signal processor
Clock Frequency: 40 MHz
Multiplier: 16 bit
Сравнить с TMS320C25FNA50 →
Texas Instruments
Processor Type: Fixed-Point Digital Signal Processor (DSP)
Multiplier: 16-bit
Package: 68-pin PLCC (24.23 mm x 24.23 mm)
Сравнить с TMS320C25FNA50 →

TMS320C25FNAR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 68-PLCC (24.23 x 24.23 mm)
Second-generation fixed-point digital signal processor · 16 bit · 40 MHz · 80 ns · 12.5 MIPS · 32 bit · 32 bit · 16 bit

Уточнить цену

Открыть даташит →

TMS320C25FNLR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 68-PLCC (24.23 x 24.23 mm)
Fixed-Point Digital Signal Processor (DSP) · 50 MHz · 80 ns · 10 MIPS · 16/32-bit single-chip digital signal processor · 32-bit · 16-bit · 544 words

Уточнить цену

Открыть даташит →

TMS320C25FNA40

✅ Прямая замена ⚠️ Характеристики не проверены
📦 68-PLCC (24.23 x 24.23 mm)
Same TMS320C25F family and 68-PLCC footprint, but the 40 MHz ordering option is 10 MHz lower than the 50 MHz target, a 20% clock-rate reduction.

📋 Справочный аналог (нет в каталоге)

TMS320C25FNA60

✅ Прямая замена ⚠️ Характеристики не проверены
📦 68-PLCC (24.23 x 24.23 mm)
Same TMS320C25F family and 68-PLCC footprint, but the 60 MHz ordering option is 10 MHz higher than the 50 MHz target, a 20% clock-rate increase.

📋 Справочный аналог (нет в каталоге)

TMS320C25FNLR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 68-PLCC (24.23 x 24.23 mm)
Fixed-Point Digital Signal Processor (DSP) · 50 MHz · 80 ns · 10 MIPS · 16/32-bit single-chip digital signal processor · 32-bit · 16-bit · 544 words

Уточнить цену

Открыть даташит →

TMS320C25FNA50 Характеристики

Processor Type Fixed-point digital signal processor
Clock Frequency 50 MHz
Core Supply Voltage 5.00 V
I/O Supply Voltage 5.00 V
Package Type 68-PLCC (24.23 mm x 24.23 mm)
Package Code QCCJ
Terminal Form J-bend
Number of Terminals 68
Package Shape Square
Product Series TMS320C2x
Temperature Grade Industrial
Тип монтажа Surface mount

Руководство по цоколевке TMS320C25FNA50 в корпусе square

Цоколевка для TMS320C25FNA50 (корпус square). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса square для TMS320C25FNA50

Нет подробных данных о распиновке для TMS320C25FNA50.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TMS320C25FNA50 подходит для 6 применениеs: Industrial Digital Control, Digital Filtering and Waveform Processing, Communications Signal Processing, Audio and Waveform Conditioning, Instrumentation and Measurement, Legacy Embedded Platform Maintenance.

🏭

Industrial Digital Control

The TMS320C25FNA50 fits a legacy industrial-control subsystem that performs fixed-point filtering, compensation, or control calculations at its 50 MHz clock rate. Its dedicated DSP role is appropriate when the control loop must execute predictably while the surrounding controller handles sequencing, communications, and operator interfaces. The 68-PLCC package and 5.00 V core and I/O supplies should be retained from the proven board revision. Before revision, verify the clock source, memory interface, peripheral assignments, and timing against the Texas Instruments data sheet. Migration is usually most economical when the original executable code, board layout, and external support logic remain unchanged.

📡

Digital Filtering and Waveform Processing

The TMS320C25FNA50 can execute the fixed-point filtering and waveform-processing workload in an embedded signal-processing subsystem requiring a 50 MHz clock. This use is appropriate when real-time sampled data must be transformed before reaching a communications link, storage stage, or downstream controller. The fixed-point architecture provides a defined arithmetic model for deterministic DSP code, while the 68-PLCC package offers ample external connectivity for memory and peripherals. Preserve the original power and clock layout because changing package, decoupling, or timing can alter system behavior. Validate numerical accuracy and execution timing in the actual firmware environment before authorizing production use.

🌐

Communications Signal Processing

The TMS320C25FNA50 is appropriate for a legacy communications subsystem that performs fixed-point filtering, modulation-related computation, or buffer processing at 50 MHz. The processor can separate signal-processing work from a host or peripheral controller while preserving an established TMS320C25 software base. Its 5.00 V core and I/O operation and 68-PLCC footprint make it most suitable for systems designed around the original platform. Review clock jitter, memory timing, interface timing, and output latency in the manufacturer documentation. A replacement program should also confirm that the current compiler, debugger, linker configuration, and runtime libraries remain operational for the intended maintenance horizon.

🎧

Audio and Waveform Conditioning

The TMS320C25FNA50 can support fixed-point audio or general waveform conditioning in legacy embedded equipment where filtering and sample-rate transformations must run deterministically. The 50 MHz clock provides the device's stated processing rate, while the DSP-specific architecture is better aligned to these calculations than a general-purpose control loop. The implementation should follow the original system partitioning, including memory allocation, interrupt timing, and peripheral connection. Check analog-to-digital and digital-to-analog interfaces separately because the processor specification does not define analog signal quality. Preserve the exact 68-PLCC footprint and verify supply, clock, and I/O timing before releasing any maintenance revision.

📟

Instrumentation and Measurement

The TMS320C25FNA50 is useful in legacy instrumentation when sampled measurements require real-time fixed-point processing, numerical correction, or filtering before display and storage. Its industrial temperature grade supports industrial-oriented equipment, and the 50 MHz operating rate defines the available processor timing for the selected algorithm. Integration requires careful attention to the clock, external memory, data buses, and control interfaces listed in the Texas Instruments documentation. Validate numerical scaling and interrupt latency in the final system rather than relying only on processor clock rate. For long-life products, confirm tool availability, firmware ownership, and component continuity because these software and sourcing factors often dominate the maintenance decision.

🔧

Legacy Embedded Platform Maintenance

The TMS320C25FNA50 is a practical choice for maintaining an embedded platform whose PCB already uses the 68-PLCC footprint and whose firmware targets the TMS320C25 architecture. Retaining the processor can avoid redesign of the memory interface, timing-sensitive routing, software runtime, and peripheral mapping. The target's 50 MHz clock and 5.00 V core and I/O supplies must match the revision of the board being serviced. Conduct a full equivalence review rather than relying on the generic family name, including suffix, package, pinout, timing, supply tolerances, and boot or initialization behavior. This approach is strongest when the original toolchain and verified system firmware remain available.

Сводка рекомендуемых товаров

TMS320C25FNA Same TMS320C25 family orderable reference Используется в: Industrial Digital Control, Digital Filtering and Waveform Processing, Communications Signal Processing, Audio and Waveform Conditioning, Instrumentation and Measurement, Legacy Embedded Platform Maintenance TMS320C25 Parent device-family reference Используется в: Industrial Digital Control, Digital Filtering and Waveform Processing, Communications Signal Processing, Audio and Waveform Conditioning, Instrumentation and Measurement, Legacy Embedded Platform Maintenance
What is the TMS320C25FNA50?
The TMS320C25FNA50 is a Texas Instruments fixed-point digital signal processor operating at 50 MHz. It uses a 68-PLCC package measuring 24.23 mm by 24.23 mm, with 5.00 V core and I/O supplies. According to the Texas Instruments TMS320C25 product page, the device is a second-generation member of the TMS320 family designed for real-time signal-processing workloads.
What are the key specifications of TMS320C25FNA50?
The TMS320C25FNA50 combines a 50 MHz clock, fixed-point DSP architecture, 5.00 V core voltage, 5.00 V I/O voltage, and a 68-PLCC package. Texas Instruments identifies the package as QCCJ with J-bend terminals and a square body. These are the principal electrical, functional, and mechanical identifiers to verify when inspecting an existing board or ordering a replacement.
Where can I download the TMS320C25FNA50 datasheet PDF?
The official TMS320C25 documentation is available through the Texas Instruments product page at https://www.ti.com/product/TMS320C25. The manufacturer states that the data sheet covers architecture, NMOS and CMOS electrical specifications, timing diagrams, and mechanical data. Use that document to confirm pin functions, supply limits, timing, and the 68-PLCC footprint before beginning a replacement design.
Where can I find the TMS320C25FNA50 pinout?
The numbered TMS320C25FNA50 pinout must be taken from the pin-description table in the Texas Instruments TMS320C25 manufacturer data sheet. The verified product information identifies a 68-PLCC package with J-bend leads and package code QCCJ but does not reproduce individual pin numbers. Use the manufacturer data sheet to assign every signal and supply connection on the PCB.
What package does TMS320C25FNA50 use?
The TMS320C25FNA50 uses a 68-PLCC package measuring 24.23 mm by 24.23 mm. Texas Instruments lists package code QCCJ, a square package shape, and J-bend terminals. The 68-pin PLCC footprint must be preserved during replacement; a processor in another package cannot be treated as a board-level drop-in replacement.
What is the operating voltage of TMS320C25FNA50?
The TMS320C25FNA50 uses 5.00 V for both its core supply and I/O supply. The Texas Instruments TMS320C25 data-sheet family documentation is the controlling reference for complete operating limits, tolerances, and timing conditions. Supply sequencing and decoupling requirements should be implemented exactly as specified for the device rather than inferred from the two nominal voltage values.
Can TMS320C25FNA50 be used for industrial signal processing?
The TMS320C25FNA50 is identified with an industrial temperature grade and is a 50 MHz fixed-point DSP. It can suit industrial control, filtering, communications, and instrumentation systems when the legacy TMS320C25 software environment, external memory, clocking, and peripheral interfaces are supported. Final suitability requires checking the complete electrical and environmental limits in the manufacturer data sheet.
Where can I buy TMS320C25FNA50 online?
Use the Request a Quote form on this page to request TMS320C25FNA50 pricing, current availability, and lead time. The exact component is a 50 MHz fixed-point DSP in a 68-PLCC package, so a quotation should state the full TMS320C25FNA50 orderable MPN and the required delivery quantity. Confirm any proposed replacement is mechanically and pin compatible before approval.
What is the price of TMS320C25FNA50?
The current TMS320C25FNA50 price should be obtained through the Request a Quote form on this page. Quantities, delivery schedule, and production requirements can affect commercial terms, and no static price should be treated as current without a quotation. State the exact 68-PLCC, 50 MHz MPN when requesting the quote to avoid ambiguity with other TMS320C25 variants.
What is the lead time for TMS320C25FNA50?
Request the current TMS320C25FNA50 lead time through the Request a Quote form on this page. The response should cover the ordered quantity, standard versus expedited delivery, and the latest manufacturing status. Because availability can change with market conditions, use the confirmed delivery schedule rather than a historical estimate when planning production or maintenance activity.
Is TMS320C25FNA50 in stock?
Current TMS320C25FNA50 stock status should be confirmed through the Request a Quote form on this page. The part is specified as a Texas Instruments 50 MHz fixed-point DSP in a 68-PLCC package. A stock confirmation should include the exact MPN, quantity, package, and delivery target, and any assembly should be scheduled only after the allocation is acknowledged.
What is the best drop-in replacement for TMS320C25FNA50?
No verified drop-in replacement for TMS320C25FNA50 was established from the available cross-reference results. A valid replacement must preserve the 68-PLCC footprint, pin functions, 50 MHz operating requirement, 5.00 V core and I/O supplies, memory interface, peripheral behavior, and software compatibility. Request a quote for the original MPN rather than accepting a functional or cross-package substitute.
Can another TMS320C25 device replace TMS320C25FNA50?
A TMS320C25-family device can replace TMS320C25FNA50 only after its exact orderable suffix, package, clock rating, electrical limits, pinout, and software behavior are verified. The Texas Instruments product page lists the TMS320C25 family, while the exact target is the 50 MHz 68-PLCC TMS320C25FNA50. A family relationship alone does not prove pin-to-pin replacement.
When should I choose TMS320C25FNA50 over a newer DSP?
Choose TMS320C25FNA50 when maintaining an existing TMS320C25-based design because its 50 MHz fixed-point processor and 68-PLCC interface match that established platform. Select a newer DSP when a new product can adopt a different architecture, development environment, package, memory system, and software toolchain. The older processor is most appropriate for lifecycle preservation rather than a ground-up modernization project.
Is TMS320C25FNA50 suitable for a legacy industrial controller?
The TMS320C25FNA50 is suitable for many legacy fixed-point signal-processing and industrial-control applications because it provides a 50 MHz DSP and is identified with an industrial temperature grade. Suitability still depends on the controller's memory map, peripherals, clock source, power design, and available compiler and debugger. Validate these elements before retaining the processor in a new production revision.

Справочные инженерные данные для TMS320C25FNA50 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose TMS320C25FNA50 when maintaining an existing TMS320C25-based board that specifically uses the 50 MHz device, 68-PLCC QCCJ footprint, 5.00 V core and I/O supplies, and the established peripheral and memory architecture. Its industrial grade makes it the direct choice for sustaining compatible industrial equipment rather than redesigning the product around a newer controller. Choose TMS320C25FNA when it is the exact approved orderable variant for the maintained design, but verify its suffix and procurement record rather than assuming equivalence. Choose the broader TMS320C25 only as a family reference for documentation or architecture review; the generic family designation does not establish an interchangeable package or speed grade. For a new design, prefer a currently supported DSP with suitable development tools unless the substantial software, mechanical, and validation cost of migration outweighs the benefits.

Сравнение с аналогами

Параметр Этот товар
Processor Type Fixed-point digital signal processor
Clock Frequency 50 MHz
Core Supply Voltage 5.00 V
I/O Supply Voltage 5.00 V
Package 68-PLCC (24.23 mm x 24.23 mm)
Package Code QCCJ
Terminal Form J-bend
Number of Terminals 68
Temperature Grade Industrial
Brand Texas Instruments

Ключевые отличия

  • Exact 50 MHz fixed-point device identity (против TMS320C25FNA)
  • Established mechanical package identification (против TMS320C25)
  • Defined core and I/O supply operation (против TMS320C25)

Заметки по проектированию

Treat the TMS320C25FNA50 as a clocked 50 MHz processor and preserve the proven placement and routing of clock, reset, and critical interface signals. The 68-PLCC footprint has a 24.23 mm by 24.23 mm body, so lead spacing and solder-joint geometry must match exactly. Before populating a new board, compare the land pattern, pin numbering, exposed supply connections, and assembly orientation against the mechanical drawing in the Texas Instruments data sheet.

Use separate, low-impedance supply paths for the 5.00 V core and I/O rails and place the decoupling network directly at the relevant device pins. Do not infer capacitor values, current limits, or allowable supply ripple from the nominal 5.00 V figures; obtain those requirements from the manufacturer data sheet. Review startup sequencing and power-supply tolerance against every clock frequency and I/O state used by the target board.

A generic TMS320C25 device name is not proof that another orderable part is interchangeable. The replacement must match the 68-PLCC package, QCCJ pin mapping, 50 MHz clock requirement, 5.00 V core and I/O operation, electrical limits, memory interface, peripheral behavior, and software execution model. Require pin-by-pin and timing comparison before approving any suffix change, and do not accept a cross-package functional equivalent as a drop-in replacement.

At 50 MHz, external memory and peripheral connections must satisfy the timing requirements stated in the TMS320C25 documentation. Account for propagation delay, loading, connector or interposer effects, and any expansion-board traces when assessing the original design. If edge behavior differs, measure the interface directly rather than changing the processor without evidence. Firmware should also retain the original initialization and timing assumptions until they are validated on the revised hardware.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The verified product information identifies an industrial temperature grade but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TMS320C25FNA50 datasheet TMS320C25FNA50 specifications TMS320C25FNA50 pinout TMS320C25FNA50 datasheet pdf Texas Instruments TMS320C25FNA50 TMS320C25FNA50 replacement TMS320C25FNA50 equivalent TMS320C25FNA50 cross reference TMS320C25FNA50 68 PLCC TMS320C25FNA50 50MHz DSP TMS320C25FNA50 price TMS320C25FNA50 stock TMS320C25FNA50 industrial application TMS320C25FNA50 footprint TMS320C25FNA50 signal processing

Связанные компоненты & термины

Texas Instruments TMS320C25FNA50 TMS320C25FNA TMS320C25 TMS320C2x fixed-point digital signal processor DSP digital signal processor signal processor semiconductor 50 MHz clock 5.00 V core voltage 5.00 V I/O voltage 68-PLCC QCCJ 24.23 mm by 24.23 mm package J-lead industrial temperature grade real-time signal processing digital filtering industrial control legacy platform maintenance
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ