TMS320C25FNA50 - 50MHz Fixed-Point DSP | Texas Instruments
料号: TMS320C25FNA50 ✓ 量产中TMS320C25FNA50 概述
A digital signal processor is a specialized semiconductor that executes mathematical operations on sampled signals. Unlike a general-purpose processor, a DSP typically combines a predictable execution model with hardware optimized for multiply-accumulate operations. The TMS320C25FNA50 is identified specifically as a fixed-point DSP, making it relevant to signal-processing systems where integer arithmetic, control loops, filters, and waveform transformations form the core workload.
Texas Instruments describes the TMS320C25 as a second-generation member of the TMS320 family. The associated data sheet is organized into architecture, electrical specifications for NMOS and CMOS implementations, timing diagrams, and mechanical data. For the TMS320C25FNA50, the documented operating clock is 50 MHz, the I/O and core voltage are both 5.00 V, and the package is the 68-pin J-lead PLCC identified by package code QCCJ.
The 68-PLCC package provides a substantial number of external connections for a signal processor operating at 50 MHz. Board design therefore requires careful treatment of clock routing, supply distribution, grounding, and output timing. The J-lead package is also mechanically different from fine-pitch leadless or ball-grid packages, so it should not be substituted with an equivalent device in another footprint without a complete PCB redesign.
Typical engineering uses include industrial digital control, communications signal processing, audio and waveform processing, embedded filtering, and instrumentation. In each case, suitability depends on the legacy TMS320C25 software toolchain, peripheral configuration, memory interface, and the availability of an external clock and power design that satisfies the device requirements. The processor is most appropriate when an existing TMS320C25-based design must be serviced or maintained without changing its architecture.
This page summarizes the manufacturer product information and distinguishes the exact orderable MPN from related TMS320C25 family references. It also highlights procurement, pinout, package, and replacement considerations that are essential when sustaining an older embedded signal-processing platform.
For new designs, evaluate software migration, development-tool availability, long-term sourcing, and controller alternatives before committing to this processor. For an existing design, preserve the TMS320C25FNA50 footprint, verify all supply and timing requirements against the manufacturer data sheet, and confirm that external memory and peripheral interfaces are unchanged before approving any substitution.
直接替换替代料: TMS320C25FNA50 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TMS320C25FNA50 (相同外形与封装尺寸) ——差异在于 Processor Type, Clock Frequency, Multiplier, Package, Package Type.
TMS320C25FNAR
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →TMS320C25FNLR
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →TMS320C25FNA40
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
TMS320C25FNA60
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
TMS320C25FNLR
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →TMS320C25FNA50 规格参数
| Processor Type | Fixed-point digital signal processor |
| Clock Frequency | 50 MHz |
| Core Supply Voltage | 5.00 V |
| I/O Supply Voltage | 5.00 V |
| Package Type | 68-PLCC (24.23 mm x 24.23 mm) |
| Package Code | QCCJ |
| Terminal Form | J-bend |
| Number of Terminals | 68 |
| Package Shape | Square |
| Product Series | TMS320C2x |
| Temperature Grade | Industrial |
| 安装类型 | Surface mount |
TMS320C25FNA50 square 引脚配置指南
TMS320C25FNA50(square 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: TMS320C25FNA50.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TMS320C25FNA50 适用于 6 应用s: Industrial Digital Control, Digital Filtering and Waveform Processing, Communications Signal Processing, Audio and Waveform Conditioning, Instrumentation and Measurement, Legacy Embedded Platform Maintenance.
Industrial Digital Control
The TMS320C25FNA50 fits a legacy industrial-control subsystem that performs fixed-point filtering, compensation, or control calculations at its 50 MHz clock rate. Its dedicated DSP role is appropriate when the control loop must execute predictably while the surrounding controller handles sequencing, communications, and operator interfaces. The 68-PLCC package and 5.00 V core and I/O supplies should be retained from the proven board revision. Before revision, verify the clock source, memory interface, peripheral assignments, and timing against the Texas Instruments data sheet. Migration is usually most economical when the original executable code, board layout, and external support logic remain unchanged.
推荐
Digital Filtering and Waveform Processing
The TMS320C25FNA50 can execute the fixed-point filtering and waveform-processing workload in an embedded signal-processing subsystem requiring a 50 MHz clock. This use is appropriate when real-time sampled data must be transformed before reaching a communications link, storage stage, or downstream controller. The fixed-point architecture provides a defined arithmetic model for deterministic DSP code, while the 68-PLCC package offers ample external connectivity for memory and peripherals. Preserve the original power and clock layout because changing package, decoupling, or timing can alter system behavior. Validate numerical accuracy and execution timing in the actual firmware environment before authorizing production use.
推荐
Communications Signal Processing
The TMS320C25FNA50 is appropriate for a legacy communications subsystem that performs fixed-point filtering, modulation-related computation, or buffer processing at 50 MHz. The processor can separate signal-processing work from a host or peripheral controller while preserving an established TMS320C25 software base. Its 5.00 V core and I/O operation and 68-PLCC footprint make it most suitable for systems designed around the original platform. Review clock jitter, memory timing, interface timing, and output latency in the manufacturer documentation. A replacement program should also confirm that the current compiler, debugger, linker configuration, and runtime libraries remain operational for the intended maintenance horizon.
推荐
Audio and Waveform Conditioning
The TMS320C25FNA50 can support fixed-point audio or general waveform conditioning in legacy embedded equipment where filtering and sample-rate transformations must run deterministically. The 50 MHz clock provides the device's stated processing rate, while the DSP-specific architecture is better aligned to these calculations than a general-purpose control loop. The implementation should follow the original system partitioning, including memory allocation, interrupt timing, and peripheral connection. Check analog-to-digital and digital-to-analog interfaces separately because the processor specification does not define analog signal quality. Preserve the exact 68-PLCC footprint and verify supply, clock, and I/O timing before releasing any maintenance revision.
推荐
Instrumentation and Measurement
The TMS320C25FNA50 is useful in legacy instrumentation when sampled measurements require real-time fixed-point processing, numerical correction, or filtering before display and storage. Its industrial temperature grade supports industrial-oriented equipment, and the 50 MHz operating rate defines the available processor timing for the selected algorithm. Integration requires careful attention to the clock, external memory, data buses, and control interfaces listed in the Texas Instruments documentation. Validate numerical scaling and interrupt latency in the final system rather than relying only on processor clock rate. For long-life products, confirm tool availability, firmware ownership, and component continuity because these software and sourcing factors often dominate the maintenance decision.
推荐
Legacy Embedded Platform Maintenance
The TMS320C25FNA50 is a practical choice for maintaining an embedded platform whose PCB already uses the 68-PLCC footprint and whose firmware targets the TMS320C25 architecture. Retaining the processor can avoid redesign of the memory interface, timing-sensitive routing, software runtime, and peripheral mapping. The target's 50 MHz clock and 5.00 V core and I/O supplies must match the revision of the board being serviced. Conduct a full equivalence review rather than relying on the generic family name, including suffix, package, pinout, timing, supply tolerances, and boot or initialization behavior. This approach is strongest when the original toolchain and verified system firmware remain available.
推荐
推荐产品汇总
工程参考数据: TMS320C25FNA50 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Processor Type | Fixed-point digital signal processor |
| Clock Frequency | 50 MHz |
| Core Supply Voltage | 5.00 V |
| I/O Supply Voltage | 5.00 V |
| Package | 68-PLCC (24.23 mm x 24.23 mm) |
| Package Code | QCCJ |
| Terminal Form | J-bend |
| Number of Terminals | 68 |
| Temperature Grade | Industrial |
| Brand | Texas Instruments |
关键差异点
- Exact 50 MHz fixed-point device identity (对比 TMS320C25FNA)
- Established mechanical package identification (对比 TMS320C25)
- Defined core and I/O supply operation (对比 TMS320C25)
设计说明
Treat the TMS320C25FNA50 as a clocked 50 MHz processor and preserve the proven placement and routing of clock, reset, and critical interface signals. The 68-PLCC footprint has a 24.23 mm by 24.23 mm body, so lead spacing and solder-joint geometry must match exactly. Before populating a new board, compare the land pattern, pin numbering, exposed supply connections, and assembly orientation against the mechanical drawing in the Texas Instruments data sheet.
Use separate, low-impedance supply paths for the 5.00 V core and I/O rails and place the decoupling network directly at the relevant device pins. Do not infer capacitor values, current limits, or allowable supply ripple from the nominal 5.00 V figures; obtain those requirements from the manufacturer data sheet. Review startup sequencing and power-supply tolerance against every clock frequency and I/O state used by the target board.
A generic TMS320C25 device name is not proof that another orderable part is interchangeable. The replacement must match the 68-PLCC package, QCCJ pin mapping, 50 MHz clock requirement, 5.00 V core and I/O operation, electrical limits, memory interface, peripheral behavior, and software execution model. Require pin-by-pin and timing comparison before approving any suffix change, and do not accept a cross-package functional equivalent as a drop-in replacement.
At 50 MHz, external memory and peripheral connections must satisfy the timing requirements stated in the TMS320C25 documentation. Account for propagation delay, loading, connector or interposer effects, and any expansion-board traces when assessing the original design. If edge behavior differs, measure the interface directly rather than changing the processor without evidence. Firmware should also retain the original initialization and timing assumptions until they are validated on the revised hardware.
合规信息
The verified product information identifies an industrial temperature grade but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance.