TMS320LC31PQ40 - 40MHz Floating-Point DSP | Texas Instruments
Артикул: TMS320LC31PQ40 ✗ Снят с производстваTMS320LC31PQ40 Обзор
A digital signal processor, or DSP, is a semiconductor optimized for arithmetic-intensive operations on continuously sampled signals. Unlike a general-purpose microcontroller, a DSP uses a highly regular execution architecture and dedicated resources to accelerate filtering, Fourier analysis, control calculations, and waveform processing. The TMS320LC31 belongs to the 32-bit floating-point DSP hierarchy within Texas Instruments embedded signal-processing products.
The processor architecture supports a 25 ns instruction cycle time at its maximum 40 MHz operating rate. At that speed, the manufacturer documents 440 million operations per second, 80 million floating-point operations per second, and 40 million instructions per second. Its floating-point arithmetic supports algorithm development with direct real-number representation, while 8.25 kB of on-chip RAM provides closely coupled storage for working data and instructions.
The TMS320LC31 family uses 0.6 µm triple-level-metal CMOS technology and provides two documented clock-performance modes. A 25 ns cycle supports 440 MOPS, 80 MFLOPS, and 40 MIPS; a 33 ns cycle supports 330 MOPS, 60 MFLOPS, and 30 MIPS. A 40 ns cycle supports 275 MOPS, 50 MFLOPS, and 25 MIPS, allowing system designers to balance processing throughput against clock and power requirements.
Typical uses include industrial control, audio and communications signal processing, instrumentation, embedded filtering, and real-time waveform analysis. The serial port supports connection to external converters, processors, or peripheral devices, while the parallel external-memory interface enables larger working memories when an algorithm exceeds the internal RAM capacity.
The principal design consideration is package capacity. A 132-pin BQFP provides extensive signal access but requires careful routing of address, data, control, serial, clock, and power pins. Designers should preserve short clock paths, provide adequate decoupling, group compatible signals, and maintain controlled-impedance routing where external memories or high-speed interfaces are used.
This page combines manufacturer performance figures, package and environmental details, application guidance, comparison information, and replacement considerations. It is designed to help engineers evaluate the TMS320LC31PQ40 for legacy or availability-sensitive DSP designs without confusing family variants with verified pin-compatible replacements.
Аналоги без доработки для TMS320LC31PQ40 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с TMS320LC31PQ40 (тот же форм-фактор и посадочное место) — отличается по Package, Processor Type.
TMS320C31PQA40
✅ Прямая заменаУточнить цену
Открыть даташит →TMS320C31PQL40
✅ Прямая заменаУточнить цену
Открыть даташит →SMQ320LC31PQM40
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SM320LC31PQM40EP
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
5962-9760601NXB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TMS320LC31PQ40 Характеристики
| Processor Type | 32-bit floating-point digital signal processor |
| Максимальная тактовая частота | 40 MHz |
| Instruction Cycle Time | 25 ns at 40 MHz |
| Maximum Operations | 440 MOPS |
| Maximum Floating-Point Performance | 80 MFLOPS |
| Maximum Instruction Performance | 40 MIPS |
| 33 ns Performance | 330 MOPS, 60 MFLOPS, 30 MIPS |
| 40 ns Performance | 275 MOPS, 50 MFLOPS, 25 MIPS |
| On-Chip RAM | 8.25 kB |
| Process Technology | 0.6 µm triple-level-metal CMOS |
| Корпус | 132-pin BQFP |
| Package Body Size | 24.13 mm x 24.13 mm |
| Диапазон рабочих температур | 0 °C to 85 °C |
| Serial Interface | Serial port |
| RoHS Classification | RoHS3 |
| Тип монтажа | Surface mount |
Руководство по цоколевке TMS320LC31PQ40 в корпусе 24.13 mm x 24.13 mm
Цоколевка для TMS320LC31PQ40 (корпус 24.13 mm x 24.13 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для TMS320LC31PQ40.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
TMS320LC31PQ40 подходит для 6 применениеs: Industrial Motor Control, Digital Audio Processing, Communications Signal Processing, Test and Measurement Instrumentation, Adaptive Filtering, Legacy Embedded DSP System.
Industrial Motor Control
The TMS320LC31PQ40 is suitable for industrial motor-control algorithms that require deterministic floating-point computation and fast instruction execution. Its documented 40 MHz operating point provides 440 MOPS, 80 MFLOPS, and 40 MIPS at a 25 ns cycle, allowing current-loop, transform, filtering, and compensation calculations to execute within a defined sampling interval. The 8.25 kB of on-chip RAM can hold time-critical working data, while the external-memory interface can accommodate larger lookup tables. Designers should verify the selected memory architecture, external interface timing, and control-loop latency before finalizing the implementation.
Рекомендуется
Digital Audio Processing
The TMS320LC31PQ40 can support real-time audio filtering, mixing, equalization, and waveform-processing tasks where floating-point arithmetic simplifies coefficient handling and dynamic-range decisions. At 40 MHz, the processor documents 440 MOPS, 80 MFLOPS, and 40 MIPS, providing substantial arithmetic throughput for sample-rate conversion and digital filter stages. The serial port offers a direct interface to audio codecs or serial converters, while 8.25 kB of RAM accommodates short working buffers. Clocking, coefficient storage, and external-memory latency must be aligned with the selected audio architecture.
Рекомендуется
Communications Signal Processing
The TMS320LC31PQ40 is applicable to communications front ends that perform filtering, modulation, demodulation, spectral analysis, or adaptive signal operations. Its 32-bit floating-point architecture and 80 MFLOPS peak performance provide a practical foundation for implementing communications algorithms, while the serial port can connect to converters and network-facing interface devices. The processor's 25 ns fastest documented cycle supports 440 MOPS and 40 MIPS, but sustained performance depends on external-memory access, instruction mix, and I/O timing. Board-level design should isolate high-speed paths and verify timing against the selected memory and interface components.
Рекомендуется
Test and Measurement Instrumentation
The TMS320LC31PQ40 fits real-time measurement tasks such as waveform analysis, digital filtering, fast Fourier transform execution, calibration, and signal reconstruction. A 40 MHz clock with 440 MOPS allows the core to process sampled data between acquisition events, while floating-point arithmetic supports dynamic-range planning without forcing immediate fixed-point scaling. Its 8.25 kB of internal RAM serves time-critical buffers, and external memory can extend record capacity. Instrumentation designs must account for converter interface timing, clock jitter, grounding, and the bandwidth required to transfer each processed result.
Рекомендуется
Adaptive Filtering
The TMS320LC31PQ40 can implement adaptive filters for noise reduction, echo cancellation, channel equalization, and system-identification functions. Floating-point arithmetic is useful when coefficient dynamic range and convergence behavior are more important than minimum multiply-accumulate count. The processor's documented 440 MOPS, 80 MFLOPS, and 40 MIPS provide a defined performance basis for estimating algorithm throughput at 40 MHz. The on-chip 8.25 kB RAM supports state and coefficient access, while external memory handles longer histories. Coefficient quantization, convergence time, and serial-port bandwidth should be evaluated before deployment.
Рекомендуется
Legacy Embedded DSP System
The TMS320LC31PQ40 is appropriate for maintaining or replicating an embedded system that already depends on the LC31 architecture, its external-memory interface, and established software behavior. The 40 MHz processor offers three documented cycle-time modes, giving designers a way to tune throughput at 25 ns, 33 ns, or 40 ns while retaining 32-bit floating-point execution. Its 8.25 kB of internal RAM and serial port support compact embedded arrangements. When preserving an existing board, verify processor identifiers, boot procedures, interrupt structure, memory-map compatibility, and pin-level electrical conditions before substituting any related part.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TMS320LC31PQ40 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TMS320C31PQA40 | TMS320C31PQL40 | SMQ320LC31PQM40 | SM320LC31PQM40EP | 5962-9760601NXB |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Harris Semiconductor |
| Package | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP |
| Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Maximum Operations | 440 MOPS | 440 MOPS | 440 MOPS | 440 MOPS | 440 MOPS | 440 MOPS |
| Maximum Floating-Point Performance | 80 MFLOPS | 80 MFLOPS | 80 MFLOPS | 80 MFLOPS | 80 MFLOPS | 80 MFLOPS |
Ключевые отличия
- Documents three selectable instruction-cycle modes (против TMS320C31PQL40)
- Clearly identified on-chip working memory (против SM320LC31PQM40EP)
- Compatible family-level performance point (против 5962-9760601NXB)
Заметки по проектированию
Treat the 132-pin BQFP as a high-pin-count mixed-signal layout. Place input, output, and power pins according to the manufacturer pin-description table rather than by package position alone. Keep clock and reset traces short, route address and data buses in a consistent topology, and provide local return paths beneath high-speed signals. A BQFP of this size can create substantial loop area if traces cross between opposing sides of the package, increasing coupling and susceptibility to timing violations.
Follow the power-pin and decoupling arrangement in the manufacturer datasheet, placing each decoupling capacitor as close as practical to its associated supply pin. Separate analog, digital, and clock-supply return paths where the application permits, and keep switching-regulator and converter outputs away from sensitive processor traces. The LC31 can sustain high arithmetic throughput, but external memory and I/O activity determine how much dynamic current reaches the package through its many supply pins.
External-memory timing is a central design constraint because 8.25 kB of internal RAM will not support every signal-processing workload. Analyze address, data, control, and clock propagation delays together rather than routing the bus first and adding margin afterward. Use a conservative external-memory timing model, keep the clock distribution symmetric, and verify read and write turnaround behavior. If the processor operates near 40 MHz, validate the complete memory path with test patterns rather than relying only on simulation.
Do not treat a shared 132-pin BQFP footprint as proof that every related processor is automatically interchangeable. Compare pin names, power rails, clock input requirements, reset behavior, external-memory protocols, serial-port signals, and software device identification before installing a substitute. Related C31 and LC31 variants can differ in memory organization or ordering-code semantics. A short production test covering boot, memory access, interrupts, serial communication, and representative floating-point routines can prevent field failures.
Информация о соответствии
The product is identified as RoHS3. REACH, lead-free status, halogen-free status, conflict-minerals compliance, and automotive qualification are not stated in the product information.