Texas Instruments

TMS320LC31PQ40 - 40MHz Floating-Point DSP | Texas Instruments

料号: TMS320LC31PQ40 ✗ 停产
132-pin BQFP Package 40 MHz Speed
最小起订量: 1 |

TMS320LC31PQ40 概述

Texas Instruments TMS320LC31PQ40 is a 32-bit floating-point digital signal processor operating at 40 MHz, with 440 MOPS, 80 MFLOPS, and 40 MIPS performance in a 132-pin BQFP package measuring 24.13 mm by 24.13 mm. The device also includes 8.25 kB of on-chip RAM and a serial communication port for embedded signal-processing designs.

A digital signal processor, or DSP, is a semiconductor optimized for arithmetic-intensive operations on continuously sampled signals. Unlike a general-purpose microcontroller, a DSP uses a highly regular execution architecture and dedicated resources to accelerate filtering, Fourier analysis, control calculations, and waveform processing. The TMS320LC31 belongs to the 32-bit floating-point DSP hierarchy within Texas Instruments embedded signal-processing products.

The processor architecture supports a 25 ns instruction cycle time at its maximum 40 MHz operating rate. At that speed, the manufacturer documents 440 million operations per second, 80 million floating-point operations per second, and 40 million instructions per second. Its floating-point arithmetic supports algorithm development with direct real-number representation, while 8.25 kB of on-chip RAM provides closely coupled storage for working data and instructions.

The TMS320LC31 family uses 0.6 µm triple-level-metal CMOS technology and provides two documented clock-performance modes. A 25 ns cycle supports 440 MOPS, 80 MFLOPS, and 40 MIPS; a 33 ns cycle supports 330 MOPS, 60 MFLOPS, and 30 MIPS. A 40 ns cycle supports 275 MOPS, 50 MFLOPS, and 25 MIPS, allowing system designers to balance processing throughput against clock and power requirements.

Typical uses include industrial control, audio and communications signal processing, instrumentation, embedded filtering, and real-time waveform analysis. The serial port supports connection to external converters, processors, or peripheral devices, while the parallel external-memory interface enables larger working memories when an algorithm exceeds the internal RAM capacity.

The principal design consideration is package capacity. A 132-pin BQFP provides extensive signal access but requires careful routing of address, data, control, serial, clock, and power pins. Designers should preserve short clock paths, provide adequate decoupling, group compatible signals, and maintain controlled-impedance routing where external memories or high-speed interfaces are used.

This page combines manufacturer performance figures, package and environmental details, application guidance, comparison information, and replacement considerations. It is designed to help engineers evaluate the TMS320LC31PQ40 for legacy or availability-sensitive DSP designs without confusing family variants with verified pin-compatible replacements.

直接替换替代料: TMS320LC31PQ40 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TMS320LC31PQ40 (相同外形与封装尺寸) ——差异在于 Package, Processor Type.

Texas Instruments
Package: 132-BQFP
Processor Type: Floating-Point Digital Signal Processor
对比 TMS320LC31PQ40 →

TMS320C31PQA40

✅ 直接替换
Texas Instruments
📦 132-pin BQFP
Floating-point digital signal processor (DSP) · C3x floating-point architecture · 32 bit · 40 MHz · 40 ns · 20 MIPS · 275 MOPS · 50 MFLOPS

联系询价

查看数据手册 →

TMS320C31PQL40

✅ 直接替换
Texas Instruments
📦 132-pin BQFP
Floating-Point Digital Signal Processor · 40 MHz · 32-bit floating-point DSP architecture · 132-BQFP · 24.13 mm x 24.13 mm · 132 pins · Bumpered leads · Surface Mount

联系询价

查看数据手册 →

SMQ320LC31PQM40

✅ 直接替换
📦 132-pin BQFP
Same 40 MHz LC31-family performance point and 132-pin BQFP format; clock difference is 0%, with qualification and ordering-code differences requiring verification.

📋 参考替代料(不在目录中)

SM320LC31PQM40EP

✅ 直接替换
📦 132-pin BQFP
Same 40 MHz LC31-family performance point and 132-pin BQFP format; clock difference is 0%, while EP suffix qualification details require verification.

📋 参考替代料(不在目录中)

5962-9760601NXB

✅ 直接替换
📦 132-pin BQFP
Radiation-oriented cross-reference candidate with the same 132-pin BQFP format and 40 MHz clock rating; clock difference is 0%, while radiation, electrical, and qualification requirements require detailed verification.

📋 参考替代料(不在目录中)

TMS320LC31PQ40 规格参数

Processor Type 32-bit floating-point digital signal processor
最大时钟频率 40 MHz
Instruction Cycle Time 25 ns at 40 MHz
Maximum Operations 440 MOPS
Maximum Floating-Point Performance 80 MFLOPS
Maximum Instruction Performance 40 MIPS
33 ns Performance 330 MOPS, 60 MFLOPS, 30 MIPS
40 ns Performance 275 MOPS, 50 MFLOPS, 25 MIPS
On-Chip RAM 8.25 kB
Process Technology 0.6 µm triple-level-metal CMOS
封装 132-pin BQFP
Package Body Size 24.13 mm x 24.13 mm
工作温度范围 0 °C to 85 °C
Serial Interface Serial port
RoHS Classification RoHS3
安装类型 Surface mount

TMS320LC31PQ40 24.13 mm x 24.13 mm 引脚配置指南

TMS320LC31PQ40(24.13 mm x 24.13 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TMS320LC31PQ40 的 24.13 mm x 24.13 mm 封装引脚图

暂无详细引脚数据: TMS320LC31PQ40.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TMS320LC31PQ40 适用于 6 应用s: Industrial Motor Control, Digital Audio Processing, Communications Signal Processing, Test and Measurement Instrumentation, Adaptive Filtering, Legacy Embedded DSP System.

🏭

Industrial Motor Control

The TMS320LC31PQ40 is suitable for industrial motor-control algorithms that require deterministic floating-point computation and fast instruction execution. Its documented 40 MHz operating point provides 440 MOPS, 80 MFLOPS, and 40 MIPS at a 25 ns cycle, allowing current-loop, transform, filtering, and compensation calculations to execute within a defined sampling interval. The 8.25 kB of on-chip RAM can hold time-critical working data, while the external-memory interface can accommodate larger lookup tables. Designers should verify the selected memory architecture, external interface timing, and control-loop latency before finalizing the implementation.

🎧

Digital Audio Processing

The TMS320LC31PQ40 can support real-time audio filtering, mixing, equalization, and waveform-processing tasks where floating-point arithmetic simplifies coefficient handling and dynamic-range decisions. At 40 MHz, the processor documents 440 MOPS, 80 MFLOPS, and 40 MIPS, providing substantial arithmetic throughput for sample-rate conversion and digital filter stages. The serial port offers a direct interface to audio codecs or serial converters, while 8.25 kB of RAM accommodates short working buffers. Clocking, coefficient storage, and external-memory latency must be aligned with the selected audio architecture.

🌐

Communications Signal Processing

The TMS320LC31PQ40 is applicable to communications front ends that perform filtering, modulation, demodulation, spectral analysis, or adaptive signal operations. Its 32-bit floating-point architecture and 80 MFLOPS peak performance provide a practical foundation for implementing communications algorithms, while the serial port can connect to converters and network-facing interface devices. The processor's 25 ns fastest documented cycle supports 440 MOPS and 40 MIPS, but sustained performance depends on external-memory access, instruction mix, and I/O timing. Board-level design should isolate high-speed paths and verify timing against the selected memory and interface components.

🔧

Test and Measurement Instrumentation

The TMS320LC31PQ40 fits real-time measurement tasks such as waveform analysis, digital filtering, fast Fourier transform execution, calibration, and signal reconstruction. A 40 MHz clock with 440 MOPS allows the core to process sampled data between acquisition events, while floating-point arithmetic supports dynamic-range planning without forcing immediate fixed-point scaling. Its 8.25 kB of internal RAM serves time-critical buffers, and external memory can extend record capacity. Instrumentation designs must account for converter interface timing, clock jitter, grounding, and the bandwidth required to transfer each processed result.

📡

Adaptive Filtering

The TMS320LC31PQ40 can implement adaptive filters for noise reduction, echo cancellation, channel equalization, and system-identification functions. Floating-point arithmetic is useful when coefficient dynamic range and convergence behavior are more important than minimum multiply-accumulate count. The processor's documented 440 MOPS, 80 MFLOPS, and 40 MIPS provide a defined performance basis for estimating algorithm throughput at 40 MHz. The on-chip 8.25 kB RAM supports state and coefficient access, while external memory handles longer histories. Coefficient quantization, convergence time, and serial-port bandwidth should be evaluated before deployment.

🖥️

Legacy Embedded DSP System

The TMS320LC31PQ40 is appropriate for maintaining or replicating an embedded system that already depends on the LC31 architecture, its external-memory interface, and established software behavior. The 40 MHz processor offers three documented cycle-time modes, giving designers a way to tune throughput at 25 ns, 33 ns, or 40 ns while retaining 32-bit floating-point execution. Its 8.25 kB of internal RAM and serial port support compact embedded arrangements. When preserving an existing board, verify processor identifiers, boot procedures, interrupt structure, memory-map compatibility, and pin-level electrical conditions before substituting any related part.

推荐产品汇总

TMS320C31PQL40 Texas Instruments 用于: Industrial Motor Control, Communications Signal Processing, Adaptive Filtering SM320LC31PQM40EP Related LC31-family processor candidate 用于: Industrial Motor Control, Test and Measurement Instrumentation, Legacy Embedded DSP System TMS320C31PQA40 Texas Instruments 用于: Digital Audio Processing, Test and Measurement Instrumentation, Legacy Embedded DSP System SMQ320LC31PQM40 Related LC31-family processing candidate 用于: Digital Audio Processing, Adaptive Filtering 5962-9760601NXB Radiation-oriented processor candidate for specialized environments 用于: Communications Signal Processing
What is the TMS320LC31PQ40?
The TMS320LC31PQ40 is a 32-bit floating-point digital signal processor from Texas Instruments, clocked at up to 40 MHz and packaged in a 132-pin BQFP. According to the manufacturer datasheet, it delivers 440 MOPS, 80 MFLOPS, and 40 MIPS at a 25 ns instruction cycle, includes 8.25 kB of on-chip RAM, and provides a serial port for peripheral communication.
What are the key specifications of TMS320LC31PQ40 that engineers should know?
The key TMS320LC31PQ40 specifications are a 40 MHz clock, 32-bit floating-point processing, 440 MOPS, 80 MFLOPS, 40 MIPS, 8.25 kB of on-chip RAM, and a 132-pin BQFP package. According to the Texas Instruments datasheet, the core uses 0.6 µm triple-level-metal CMOS and supports documented 25 ns, 33 ns, and 40 ns instruction-cycle operating modes.
What is the operating temperature range of TMS320LC31PQ40?
The TMS320LC31PQ40 operates from 0 °C to 85 °C. According to the manufacturer product information, the device is supplied in a 132-pin BQFP package with a 24.13 mm by 24.13 mm body. The stated temperature range should be checked against the operating environment and system thermal conditions before deployment.
Where can I download the TMS320LC31PQ40 datasheet PDF?
The TMS320LC31PQ40 datasheet PDF is linked from this product page and identifies the processor as a 32-bit floating-point DSP with performance modes of 440 MOPS, 330 MOPS, or 275 MOPS. Use the manufacturer datasheet for the authoritative pin descriptions, electrical characteristics, timing parameters, and application information before laying out or servicing the 132-pin BQFP circuit.
Where can I find the TMS320LC31PQ40 pinout?
The TMS320LC31PQ40 pinout is documented in the manufacturer datasheet, whose PDF link appears in the datasheet field on this page. The component uses a 132-pin BQFP package, so do not infer pin assignments from a generic quad-flat package drawing. Use the datasheet pin-description table and package drawing to map address, data, control, serial, clock, and power connections.
Is TMS320LC31PQ40 suitable for real-time signal processing?
Yes, the TMS320LC31PQ40 is suitable for real-time floating-point signal processing at up to 40 MHz. According to the Texas Instruments datasheet, its 25 ns cycle provides 440 MOPS, 80 MFLOPS, and 40 MIPS, while 8.25 kB of on-chip RAM supports time-critical data. External memory and serial peripherals broaden its capability when working sets exceed internal storage.
How much on-chip memory does TMS320LC31PQ40 have?
The TMS320LC31PQ40 includes 8.25 kB of on-chip RAM. According to the manufacturer datasheet, this memory supports closely coupled instruction and data operations in a 32-bit floating-point architecture. The processor also supports external memory access, which is important for filtering, waveform, and communications algorithms whose working sets exceed the internal RAM.
What performance can TMS320LC31PQ40 achieve at 40 MHz?
At a 40 MHz clock with a 25 ns instruction cycle, the TMS320LC31PQ40 performs 440 MOPS, 80 MFLOPS, and 40 MIPS. The manufacturer datasheet also documents lower-cycle-rate modes of 330 MOPS, 60 MFLOPS, and 30 MIPS at 33 ns, and 275 MOPS, 50 MFLOPS, and 25 MIPS at 40 ns, enabling clock-versus-throughput design choices.
Where can I buy TMS320LC31PQ40 online?
Use the Request a Quote form on this page to request TMS320LC31PQ40 pricing, stock confirmation, lead time, and order details. The form lets you specify the required quantity and package configuration without relying on an unverified availability statement. Lead time and stock can change, so obtain a written quotation for the specific order quantity before committing the component to a production schedule.
What is the price of TMS320LC31PQ40?
Request the current TMS320LC31PQ40 quotation through the Request a Quote form on this page. The form provides the appropriate sourcing channel for the exact 132-pin BQFP configuration and requested order quantity. Pricing and availability should be confirmed for the current market conditions rather than relying on a historical or family-level amount.
What is the lead time and stock status for TMS320LC31PQ40?
Request the current TMS320LC31PQ40 lead time, stock position, and minimum order quantity through the Request a Quote form on this page. Because this is an older DSP family, production and inventory status may vary by quantity and suffix. Confirm availability, date code, condition, and shipment quantity in the quotation before ordering.
Is TMS320LC31PQ40 in stock?
Stock confirmation for TMS320LC31PQ40 should be obtained through the Request a Quote form on this page. The form accepts the required quantity and supporting delivery information so the sourcing team can check the exact 132-pin BQFP ordering code. Do not treat an obsolete-family designation as confirmation that inventory is available.
TMS320LC31PQ40 vs TMS320C31PQL40 - which is better for a new design?
TMS320LC31PQ40 and TMS320C31PQL40 belong to the related 32-bit floating-point DSP families and share a 132-pin BQFP format. For an existing TMS320LC31PQ40 board, select a replacement only after checking every pin, clock-performance mode, memory interface signal, and software-related device identifier. For a new design, use the current device documentation and lifecycle information as the deciding factors.
What is the best drop-in replacement for TMS320LC31PQ40?
The closest documented replacement candidates are the 132-pin BQFP variants TMS320C31PQA40, TMS320C31PQL40, SMQ320LC31PQM40, SM320LC31PQM40EP, and 5962-9760601NXB. A true drop-in decision still requires pin-by-pin comparison, electrical timing review, device-identification checks, and software validation; matching the package and 40 MHz clock alone does not prove functional equivalence.
Can TMS320C31PQL40 replace TMS320LC31PQ40 on the same PCB?
TMS320C31PQL40 can be considered a same-package replacement candidate for TMS320LC31PQ40 because both are 132-pin BQFP devices in the related C31 and LC31 processor families. Before replacing the installed part, compare the manufacturer pin descriptions, external-memory interface, serial-port behavior, clock ratings, reset requirements, and software device configuration to confirm operational compatibility.
Is TMS320LC31PQ40 the same as a 5962-9760601NXB?
No. TMS320LC31PQ40 is a Texas Instruments 40 MHz, 32-bit floating-point DSP in a 132-pin BQFP, whereas the 5962-9760601NXB is a separately identified radiation-oriented processor candidate. The cross-reference listing establishes a functional search relationship, not unconditional interchangeability. Confirm pinout, radiation specifications, electrical limits, clocking, memory behavior, and software support before substitution.

工程参考数据: TMS320LC31PQ40 ——对比、设计指导和合规信息。

选型指南

Choose TMS320LC31PQ40 when maintaining an LC31-based design that specifically requires 40 MHz operation, 8.25 kB of internal RAM, and the documented 440-MOPS performance point. Its three documented cycle-time modes also provide useful flexibility when the clocking plan changes. Consider TMS320C31PQA40 or TMS320C31PQL40 when evaluating a closely related Texas Instruments processor, but verify memory organization, device identifiers, and software support rather than relying on package identity alone. SMQ320LC31PQM40 and SM320LC31PQM40EP are useful LC31-family migration candidates when their ordering and qualification details match the deployment environment. Consider the 5962-9760601NXB only for applications requiring its specialized radiation-oriented characteristics, and complete a formal pin, electrical, timing, and software equivalence review. For all replacements, validate boot, external-memory access, interrupts, serial-port operation, and representative DSP routines on the assembled board.

与替代料对比

参数 本产品 TMS320C31PQA40 TMS320C31PQL40 SMQ320LC31PQM40 SM320LC31PQM40EP 5962-9760601NXB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Harris Semiconductor
Package 132-pin BQFP 132-pin BQFP 132-pin BQFP 132-pin BQFP 132-pin BQFP 132-pin BQFP
Clock Frequency 40 MHz 40 MHz 40 MHz 40 MHz 40 MHz 40 MHz
Maximum Operations 440 MOPS 440 MOPS 440 MOPS 440 MOPS 440 MOPS 440 MOPS
Maximum Floating-Point Performance 80 MFLOPS 80 MFLOPS 80 MFLOPS 80 MFLOPS 80 MFLOPS 80 MFLOPS

关键差异点

  • Documents three selectable instruction-cycle modes (对比 TMS320C31PQL40)
  • Clearly identified on-chip working memory (对比 SM320LC31PQM40EP)
  • Compatible family-level performance point (对比 5962-9760601NXB)

设计说明

Treat the 132-pin BQFP as a high-pin-count mixed-signal layout. Place input, output, and power pins according to the manufacturer pin-description table rather than by package position alone. Keep clock and reset traces short, route address and data buses in a consistent topology, and provide local return paths beneath high-speed signals. A BQFP of this size can create substantial loop area if traces cross between opposing sides of the package, increasing coupling and susceptibility to timing violations.

Follow the power-pin and decoupling arrangement in the manufacturer datasheet, placing each decoupling capacitor as close as practical to its associated supply pin. Separate analog, digital, and clock-supply return paths where the application permits, and keep switching-regulator and converter outputs away from sensitive processor traces. The LC31 can sustain high arithmetic throughput, but external memory and I/O activity determine how much dynamic current reaches the package through its many supply pins.

External-memory timing is a central design constraint because 8.25 kB of internal RAM will not support every signal-processing workload. Analyze address, data, control, and clock propagation delays together rather than routing the bus first and adding margin afterward. Use a conservative external-memory timing model, keep the clock distribution symmetric, and verify read and write turnaround behavior. If the processor operates near 40 MHz, validate the complete memory path with test patterns rather than relying only on simulation.

Do not treat a shared 132-pin BQFP footprint as proof that every related processor is automatically interchangeable. Compare pin names, power rails, clock input requirements, reset behavior, external-memory protocols, serial-port signals, and software device identification before installing a substitute. Related C31 and LC31 variants can differ in memory organization or ordering-code semantics. A short production test covering boot, memory access, interrupts, serial communication, and representative floating-point routines can prevent field failures.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product is identified as RoHS3. REACH, lead-free status, halogen-free status, conflict-minerals compliance, and automotive qualification are not stated in the product information.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

TMS320LC31PQ40 datasheet TMS320LC31PQ40 datasheet pdf TMS320LC31PQ40 pinout TMS320LC31PQ40 specifications TMS320LC31PQ40 equivalent TMS320LC31PQ40 replacement TMS320LC31PQ40 cross reference Texas Instruments TMS320LC31PQ40 TMS320LC31PQ40 40MHz DSP TMS320LC31PQ40 132 pin BQFP TMS320LC31PQ40 price TMS320LC31PQ40 stock TMS320LC31PQ40 vs TMS320C31PQL40 TMS320LC31PQ40 industrial control

相关元器件 & 术语

Texas Instruments TMS320LC31PQ40 TMS320C31PQA40 TMS320C31PQL40 SMQ320LC31PQM40 SM320LC31PQM40EP 5962-9760601NXB digital signal processor DSP floating-point processor embedded processor semiconductor 132-pin BQFP quad flat package surface-mount package 40 MHz 440 MOPS 80 MFLOPS 40 MIPS 8.25 kB RAM serial port 0.6 µm CMOS RoHS3 industrial motor control digital audio processing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情