TPS2054 - Quad 0.5A USB Power Switch 80mOhm | Texas Instruments
Артикул: TPS2054 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
TPS2054 Обзор
A power-distribution switch is a type of load switch within the power management IC hierarchy that sits between a supply rail and its load, providing controlled turn-on, fault protection, and status reporting. USB power switches specifically guard downstream ports against overcurrent and short-circuit faults, preventing host rail collapse in systems that distribute 5 V power to multiple peripheral ports.
Key features include 500 mA continuous current per channel for USB compliance, 135 mOhm typical high-side MOSFET resistance, short-circuit and thermal protection, and an overcurrent logic output (nFAULT) that signals fault conditions to the host controller. The device offers logic-level enable inputs, a 2.5 ms typical output rise time that limits inrush current during hot-plug events, and undervoltage lockout for predictable startup behavior.
Internally, each switch uses a charge-pumped N-channel MOSFET gate drive with precision current-sense circuitry. When load current exceeds the 0.9 A limit, the device enters constant-current mode; sustained faults trigger thermal shutdown per channel. The open-drain overcurrent output allows direct connection to a microcontroller GPIO with a pull-up resistor.
Typical applications include USB hub port power control, self-powered and bus-powered USB peripherals, multi-port charging accessories, hot-plug power switching in embedded systems, and industrial power-rail partitioning requiring per-channel fault isolation.
Design tip: the controlled 2.5 ms rise time removes the need for external soft-start circuitry, but ensure PCB traces per channel are rated for 0.9 A fault current and place the input/output bypass capacitors close to the device pins for stable current-limit behavior.
Аналоги без доработки для TPS2054 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с TPS2054 (тот же форм-фактор и посадочное место) — отличается по Fault Reporting, Output Rise Time, Package, RoHS Status, Topology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
TPS2054BDR
✅ Прямая замена✓ В наличии
$1.12 / шт.
Открыть даташит →TPS2054BD
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TPS2054D
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TPS2044D
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TPS2053D
⚡ Тот же корпус ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TPS2054 Максимальные параметры и электрические характеристики
| Топология | High-side power-distribution switch |
| Number of Channels | 4 |
| Диапазон входного напряжения | 2.7 V to 5.5 V |
| Continuous Current per Channel | 500 mA |
| Ограничение тока | 0.9 A |
| On-Resistance | 80 mOhm maximum (5 V input); 135 mOhm typical |
| Enable Logic | Active-high |
| Output Rise Time | 2.5 ms typical |
| Protection | Short-circuit, thermal shutdown, undervoltage lockout |
| Fault Reporting | Overcurrent logic output |
| Рабочая температура | -40C to 85C |
| Корпус | 16-pin SOIC (D) |
| Тип монтажа | Surface Mount |
| Application | USB power distribution |
| Статус RoHS | Compliant |
Конфигурация выводов TPS2054
| Контакт 1 | EN1 — Enable input, channel 1 (active high) |
| Контакт 2 | EN2 — Enable input, channel 2 (active high) |
| Контакт 3 | EN3 — Enable input, channel 3 (active high) |
| Контакт 4 | EN4 — Enable input, channel 4 (active high) |
| Контакт 5 | nFAULT — Overcurrent logic fault output (open drain) |
| Контакт 6 | IN — Input supply, 2.7 V to 5.5 V |
| Контакт 7 | GND — Ground |
| Контакт 8 | GND — Ground |
| Контакт 9 | OUT4 — Switched output, channel 4 |
| Контакт 10 | OUT3 — Switched output, channel 3 |
| Контакт 11 | OUT2 — Switched output, channel 2 |
| Контакт 12 | OUT1 — Switched output, channel 1 |
| Контакт 13 | GND — Ground |
| Контакт 14 | GND — Ground |
| Контакт 15 | IN — Input supply, 2.7 V to 5.5 V |
| Контакт 16 | IN — Input supply, 2.7 V to 5.5 V |
Типичное применение
TPS2054 подходит для 6 применениеs: USB Hub Port Power Control, Self-Powered USB Peripherals, Industrial Multi-Rail Power Partitioning, Hot-Plug Power Switching, Battery-Charging Port Accessories, Embedded System GPIO Load Control.
USB Hub Port Power Control
The TPS2054 is purpose-built for USB hub power distribution: its four independent 500 mA channels map directly to four downstream ports, while the 0.9 A current limit exceeds the USB 500 mA budget to prevent nuisance tripping. The 2.5 ms controlled rise time suppresses hot-plug inrush from downstream bulk capacitance, and the open-drain overcurrent output lets the hub controller identify and report faulted ports. One SOIC-16 device replaces four discrete switches, cutting board area and BOM cost.
Рекомендуется
Self-Powered USB Peripherals
In self-powered peripherals such as printers, scanners, and external drives, the TPS2054 switches the VBUS pass-through or auxiliary 5 V rails with full fault protection. The 2.7 V to 5.5 V input range tolerates 5 V rail sag, undervoltage lockout guarantees a clean output during brownout, and 135 mOhm typical on-resistance keeps voltage drop under 70 mV at 500 mA - comfortably within the USB 4.75 V minimum at the port.
Рекомендуется
Industrial Multi-Rail Power Partitioning
Industrial control boards often need to switch multiple 5 V loads independently with per-channel fault isolation. The TPS2054 provides four protected high-side switches in one package; a single channel shorting to ground is clamped at 0.9 A and thermally shut down without affecting the other three channels, and the nFAULT output feeds a microcontroller for condition monitoring. Operation from -40C to 85C suits factory-floor environments.
Рекомендуется
Hot-Plug Power Switching
Cards, docking accessories, and field-serviceable modules benefit from the TPS2054's controlled 2.5 ms output rise time, which limits inrush current when a capacitive load is connected. Combined with short-circuit clamping and undervoltage lockout, this prevents connector arcing damage and host rail droop during insertion. Four channels allow independent enable sequencing of several module rails from a single SOIC-16 footprint.
Рекомендуется
Battery-Charging Port Accessories
Multi-port charging cradles and accessories use the TPS2054 to gate 5 V to individual charging bays. Per-channel 0.9 A current limiting tolerates high inrush from discharged battery-pack input capacitors while still protecting against hard shorts, and the overcurrent logic output enables host-side charge-fault logging. The 80 mOhm maximum resistance minimizes wasted power and heat across the switch during continuous charging.
Рекомендуется
Embedded System GPIO Load Control
Embedded designers use the TPS2054 as a protected, logic-level GPIO-controlled load switch bank. The active-high enables connect directly to 3.3 V or 5 V microcontroller outputs without level shifting, and internal protection removes the need for discrete fuse, sense-resistor, and comparator circuits. One device independently switches four peripheral rails such as sensors, radios, and displays for aggressive power budgeting.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TPS2054 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TPS2054BDR | TPS2054BD | TPS2054D | TPS2044D |
|---|---|---|---|---|---|
| Package | SOIC-16 (D) | SOIC-16 (D) - same | SOIC-16 (D) - same | SOIC-16 (D) - same | SOIC-16 (D) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Channels | 4 | 4 | 4 | 4 | 4 |
| Continuous Current | 0.5 A per channel | 0.5 A per channel | 0.5 A per channel | 0.5 A per channel | 0.5 A per channel |
| Current Limit | 0.9 A | 0.9 A (per TI) | 0.9 A (per TI) | 0.9 A | 0.9 A |
| On-Resistance | 80 mOhm max (5 V) | 70 mOhm | 70 mOhm | 80 mOhm max | 135 mOhm |
| Input Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Enable Logic | Active-high | Active-high | Active-high | Active-high | Active-high |
| Protection Features | Short-circuit, thermal, UVLO, nFAULT | Short-circuit, thermal, UVLO, nFAULT | Short-circuit, thermal, UVLO, nFAULT | Short-circuit, thermal, UVLO, nFAULT | Short-circuit, thermal, UVLO, nFAULT |
Ключевые отличия
- Lower on-resistance than TPS2044 (против TPS2044D)
- Four channels in one SOIC-16 (против TPS2051 (single-channel series))
- Per-channel overcurrent logic output (против Discrete MOSFET + fuse solutions)
Заметки по проектированию
Place a 0.1 uF ceramic bypass capacitor close to the IN pins and size output capacitance per USB spec (typically 120 uF minimum bulk per port). Route each 500 mA channel trace with adequate copper width (at least 0.5 mm of 1 oz copper for margin) to handle 0.9 A fault current without excessive heating. Keep the nFAULT pull-up resistor (10 kOhm to logic rail) short to minimize noise pickup.
At 500 mA with 135 mOhm typical on-resistance, each channel dissipates about 34 mW - total roughly 135 mW, so no heatsinking is needed. However, during a sustained short-circuit the device clamps at 0.9 A, tripling conduction loss per channel before thermal shutdown; ensure ambient airflow allows repeated fault-retry cycles without exceeding the 85 C ambient limit.
The TPS2054 and TPS2054B have different on-resistance (80 mOhm max vs 70 mOhm) - verify which variant your BOM actually requires before substitution since the suffix matters for voltage-drop budgets. Also note distributor-listed equivalents TPS2051/TPS2053/TPS2055 differ in channel count and are NOT pin-compatible; do not treat them as drop-in parts.
Информация о соответствии
RoHS compliant per TI product page. AEC-Q100 qualification not indicated for the standard TPS2054; the TPS2054B family listing does not claim Q1 grade. REACH and halogen status not stated in verified data.
