Analog Devices

VSC7155XVU-02 - 18-PHY SAS Edge/Fanout Expander | Analog Devices

Артикул: VSC7155XVU-02 ✓ Активен
MOQ: 1 |

VSC7155XVU-02 Обзор

Analog Devices VSC7155XVU-02 is an 18-PHY SAS Edge and Fanout Expander with table routing and an SSP engine, supporting 1.5 Gbps and 3.0 Gbps SAS operation in an integrated-circuit package. It expands a narrow SAS link into multiple physical lanes while providing centralized path routing for storage and data-processing systems.

A SAS expander is a semiconductor interface controller that enables one host-side connection to fan out to multiple SAS devices or expander nodes. Such devices simplify backplane topology by replacing a large number of point-to-point host links with shared physical-layer resources. The VSC7155XVU-02 sits within this interface-expansion layer, between SAS initiators, expanders, and attached storage targets.

The controller provides 18 physical PHYs, 1.5 Gbps and 3.0 Gbps data-rate capability, table-based routing, and an SSP engine. These features support scalable SAS edge and fanout architectures where link consolidation, device discovery, and controlled traffic distribution are important. The 18-PHY arrangement allows a single package to manage numerous SAS connections while reducing the number of separate interface controllers required by a system.

SAS physical-layer expansion is particularly useful in storage systems that must balance density, cable reach, and failure isolation. Table routing organizes communication among attached nodes, while the SSP engine provides dedicated processing for Serial SCSI Protocol operations. In a well-balanced system, these functions allow initiator traffic to reach storage targets without requiring every target to connect directly to the host controller.

Typical applications include SAS storage backplanes, edge expanders, fanout enclosures, data-center storage subsystems, and industrial systems using Serial ATA or SAS connectivity. The controller is also relevant to equipment requiring multiple serialized storage links, provided that the system-level cable, connector, power, and signal-integrity requirements are designed around the supported SAS data rates.

For implementation, preserve controlled-impedance routing for high-speed SAS links and minimize discontinuities between the controller, connector, and cable path. Follow the manufacturer's reference design for layer transitions, reference-plane construction, via geometry, and decoupling. Confirm the exact exposed-pad, lead, and thermal requirements against the package drawing before layout release.

This product overview combines the documented 18-PHY, 1.5 Gbps, 3.0 Gbps, table-routing, and SSP-engine characteristics with practical guidance for package identification, board layout, thermal management, and drop-in replacement assessment.

Аналоги без доработки для VSC7155XVU-02 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

VSC7155XVU-01

✅ Прямая замена ⚠️ Характеристики не проверены
📦 Same package as VSC7155XVU-02
The -01 suffix differs from -02 while the documented PHY count remains 18 and the supported data rates remain 1.5 Gbps and 3.0 Gbps, a 0% difference in those headline parameters; exact package and qualification require confirmation.

📋 Справочный аналог (нет в каталоге)

VSC7155XVU-03

✅ Прямая замена ⚠️ Характеристики не проверены
📦 Same package as VSC7155XVU-02
The -03 suffix differs from -02 while the documented PHY count remains 18 and the supported data rates remain 1.5 Gbps and 3.0 Gbps, a 0% difference in those headline parameters; exact package and qualification require confirmation.

📋 Справочный аналог (нет в каталоге)

VSC7155XVU-02 Характеристики

Product Type SAS Edge/Fanout Expander
Physical Layer Count 18 PHYs
Supported SAS Data Rate 1 1.5 Gbps
Supported SAS Data Rate 2 3.0 Gbps
Routing Architecture Table routing
Protocol Engine SSP engine
Manufacturer Analog Devices / Maxim Integrated
Device Classification Interface controller / I/O expander
Application SAS Edge and Fanout expansion
Maximum Data Rate 3.0 Gbps

Руководство по цоколевке VSC7155XVU-02 в корпусе standard

Цоколевка для VSC7155XVU-02 (корпус standard). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса standard для VSC7155XVU-02

Нет подробных данных о распиновке для VSC7155XVU-02.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

VSC7155XVU-02 подходит для 6 применениеs: SAS Storage Backplane, SAS Fanout Enclosure, Data-Center Storage Subsystem, Industrial Storage Controller, External SAS Storage Bridge, SAS Edge Expansion Card.

🖥️

SAS Storage Backplane

The VSC7155XVU-02 fits a SAS storage backplane that needs to distribute multiple serialized-storage links from a compact expander point. Its 18 PHYs provide substantial physical-layer capacity, while 1.5 Gbps and 3.0 Gbps support allows the same controller family to address two documented SAS link rates. Table routing and the SSP engine help organize communication across backplane nodes. The designer should preserve controlled-impedance paths, maintain uninterrupted reference planes, and follow the manufacturer layout guidance for connector launches, via transitions, and decoupling.

🔧

SAS Fanout Enclosure

The VSC7155XVU-02 is appropriate for a fanout enclosure that connects one system-side interface to several SAS targets or downstream expanders. With 18 PHYs and support for both 1.5 Gbps and 3.0 Gbps, the controller can consolidate numerous physical connections without requiring one host port per device. Table-based routing supports organized link relationships, while the SSP engine handles relevant Serial SCSI Protocol processing. Cable length, connector insertion loss, power budgeting, and system fault isolation must be evaluated together when defining enclosure capacity.

🖥️

Data-Center Storage Subsystem

The VSC7155XVU-02 can support a data-center storage subsystem that values link consolidation and orderly device discovery. Its 18-PHY count creates a high-density expansion point, and the documented 1.5 Gbps and 3.0 Gbps rates allow design teams to match the expander to the generation of attached SAS infrastructure. Table routing simplifies topology management across shared links, while the SSP engine contributes protocol processing. At system level, verify thermal performance, power-supply headroom, fail-safe behavior, and the signal-integrity budget for each supported data rate.

🏭

Industrial Storage Controller

The VSC7155XVU-02 fits industrial storage controllers that need multiple SAS connections in a space-constrained embedded system. Eighteen PHYs can support dense target or expander connectivity, and operation at 1.5 Gbps or 3.0 Gbps provides options for balancing throughput against link budget. Table routing and the SSP engine support structured access across the storage fabric. Because the exact package, electrical ratings, and temperature limits must come from the manufacturer documentation, confirm those items before approving a ruggedized industrial product configuration.

🔧

External SAS Storage Bridge

The VSC7155XVU-02 can serve as the expansion element in an external SAS storage bridge where a host interface must reach multiple storage devices through a controlled physical layer. Its 18 PHYs provide fanout capacity, while support for 1.5 Gbps and 3.0 Gbps offers flexibility across two documented SAS generations. Table routing and the SSP engine help structure communication between the bridge and targets. Cable and connector losses, grounding, shielding, enclosure temperature, and hot-plug behavior must be addressed in the complete bridge design.

🖥️

SAS Edge Expansion Card

The VSC7155XVU-02 is suitable for a SAS edge expansion card intended to add serialized-storage connectivity to an existing chassis or compute platform. The 18-PHY arrangement allows one card to represent multiple physical links, reducing connector pressure on the host board when designed with table routing and SSP engine support. The 1.5 Gbps and 3.0 Gbps options enable link selection according to the installed storage topology. A successful card design must preserve signal integrity across connector and PCB transitions while satisfying the manufacturer's power, grounding, and layout requirements.

Сводка рекомендуемых товаров

VSC7155XVU-02 Analog Devices Используется в: SAS Storage Backplane, SAS Fanout Enclosure, Data-Center Storage Subsystem, Industrial Storage Controller, External SAS Storage Bridge, SAS Edge Expansion Card VSC7155XVU-01 Same-family SAS expander variant Используется в: SAS Storage Backplane, Data-Center Storage Subsystem, External SAS Storage Bridge VSC7155XVU-03 Same-family fanout-controller variant Используется в: SAS Fanout Enclosure, Industrial Storage Controller, SAS Edge Expansion Card
What is the VSC7155XVU-02?
The VSC7155XVU-02 is an 18-PHY SAS Edge and Fanout Expander with table routing and an SSP engine. According to the manufacturer product description, it supports SAS operation at 1.5 Gbps and 3.0 Gbps. The device consolidates multiple serialized-storage connections through a dedicated expander function, reducing the need for separate host links to every attached node.
How many SAS PHYs does the VSC7155XVU-02 have?
The VSC7155XVU-02 provides 18 SAS physical layers, or 18 PHYs. According to the manufacturer product description, this physical-layer count allows the controller to fan out one system interface across numerous SAS connections. The 18-PHY figure should be considered during backplane planning together with connector count, cable reach, and the number of attached expander or target devices.
What SAS data rates does the VSC7155XVU-02 support?
The VSC7155XVU-02 supports 1.5 Gbps and 3.0 Gbps SAS data rates. According to the manufacturer product description, these ratings position the controller for 3.0 Gbps SAS edge and fanout systems. Actual link operation must also satisfy the electrical, protocol, connector, and cable requirements of the complete Serial SCSI Protocol system.
Where can I download the VSC7155XVU-02 datasheet PDF?
The VSC7155XVU-02 datasheet PDF is available through the product document linked on this page. It is the appropriate document for confirming the package drawing, pin assignments, electrical characteristics, clocking, power rails, reset behavior, and reference-layout requirements. Download the exact -02 document because suffix variants may contain different qualification or ordering details.
Where can I find the VSC7155XVU-02 pinout?
The VSC7155XVU-02 pinout should be taken from the pin-description table in the manufacturer datasheet for the exact package suffix. Use that table to assign power, ground, clock, serial-link, control, and configuration signals before routing the PCB. Do not infer pin assignments from the 18-PHY count because PHY positions and package boundaries do not determine the electrical pin map.
What is the difference between VSC7155XVU-02 and VSC7155XVU-01?
The documented core architecture remains the 18-PHY SAS expander with 1.5 Gbps and 3.0 Gbps operation, table routing, and an SSP engine across the VSC7155XVU-02 and VSC7155XVU-01 order variants. The -02 suffix is the target ordering designation. Before using the -01 as a drop-in replacement, confirm package, pinout, electrical limits, qualification, and lifecycle status in the manufacturer documentation.
Is VSC7155XVU-02 suitable for a SAS storage backplane?
The VSC7155XVU-02 is suitable for a SAS storage backplane when the design uses 18 physical layers, supports the required 1.5 Gbps or 3.0 Gbps link rate, and implements the routing and SSP functions required by the system. Its 18 PHYs permit substantial fanout, while table routing and the SSP engine help manage communication across expander nodes and storage targets.
What can replace the VSC7155XVU-02?
A safe replacement for the VSC7155XVU-02 must preserve the 18-PHY arrangement, 1.5 Gbps and 3.0 Gbps capability, table routing, SSP engine function, package, pin assignments, power rails, and system timing. VSC7155XVU-01 is a same-family candidate for engineering review, but a drop-in decision requires comparison of the exact package and electrical documentation. Do not substitute solely because a part is labeled a SAS expander.
Is there a cross-brand drop-in equivalent for the VSC7155XVU-02?
No cross-brand drop-in equivalent is established for the VSC7155XVU-02 by the available manufacturer and distributor records. A valid cross-brand replacement would need to match all 18 PHYs, both 1.5 Gbps and 3.0 Gbps rates, table routing, SSP functionality, package, and pinout. Use the Request a Quote form on this page when sourcing, and require manufacturer-level documentation before approving a substitute.
When should I choose VSC7155XVU-02 over VSC7155XVU-01?
Choose the VSC7155XVU-02 when the ordered system design specifically requires the -02 suffix, supported product documentation, and the intended lifecycle configuration. Choose VSC7155XVU-01 only when its package, pinout, electrical ratings, qualification, and availability have been checked against the -02 design. Both variants share the same documented 18-PHY, 1.5 Gbps, 3.0 Gbps, table-routing, and SSP-engine architecture.
Can VSC7155XVU-01 replace VSC7155XVU-02?
The VSC7155XVU-01 can be evaluated as a same-family drop-in candidate because both devices are described around 18 PHYs, 1.5 Gbps and 3.0 Gbps operation, table routing, and an SSP engine. Approval still depends on identical package geometry, pin assignments, power and timing requirements, qualification, and lifecycle suitability. Verify those points against the manufacturer datasheet before production substitution.
What are the key specifications of VSC7155XVU-02 that engineers should know?
The key VSC7155XVU-02 specifications are 18 PHYs, support for 1.5 Gbps and 3.0 Gbps SAS links, table routing, and an SSP engine. According to the manufacturer product description, the controller is intended for SAS Edge and Fanout expansion. Package dimensions, pin assignments, supply voltages, power consumption, and temperature limits must be confirmed in the exact manufacturer datasheet before schematic or layout release.
How much power does the VSC7155XVU-02 consume?
The power-consumption figures for the VSC7155XVU-02 must be taken from the exact manufacturer datasheet because they depend on supply voltage, operating data rate, PHY activity, clocking, and the implemented system configuration. Use those figures for junction-temperature and power-supply calculations rather than substituting values from another SAS expander. The 18-PHY count alone does not determine consumed power.
Where can I buy the VSC7155XVU-02 online?
The VSC7155XVU-02 can be requested through the Request a Quote form on this page. Submit the exact MPN, target quantity, required package or reel suffix, and destination country so the order can be matched without changing the device variant. Current commercial availability should be confirmed during quotation because lifecycle and lead time can change independently of the electrical design.
What is the price of the VSC7155XVU-02?
Current commercial pricing for the VSC7155XVU-02 is obtained through the Request a Quote form on this page. Include the required quantity, package or tape-and-reel suffix, ship-to country, and target schedule in the request. This approach reflects the actual order configuration and avoids presenting a stale quantity-break figure for a different suffix or pack format.
What is the lead time and stock status for the VSC7155XVU-02?
Current stock and lead time for the VSC7155XVU-02 should be confirmed through the Request a Quote form on this page. Provide the exact MPN, annual and forecast quantities, and required delivery date. A listing showing inventory is not a commitment, so require a dated confirmation before reserving components against a production or maintenance schedule.

Справочные инженерные данные для VSC7155XVU-02 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the VSC7155XVU-02 when the design specifically calls for the -02 ordering variant of an 18-PHY SAS Edge/Fanout Expander supporting 1.5 Gbps and 3.0 Gbps operation. It is appropriate for storage backplanes, fanout enclosures, data-center storage subsystems, and SAS edge cards where table routing and SSP-engine processing are required. Review VSC7155XVU-01 when the design needs an earlier same-family suffix, but confirm its package, pinout, electrical limits, qualification, and lifecycle status before approving substitution. Review VSC7155XVU-03 only when the newer same-family suffix provides a required qualification or availability advantage. No cross-brand part should be treated as a drop-in alternative without proof of identical package, pin assignments, 18-PHY capability, both data rates, routing behavior, SSP functionality, power requirements, and timing. For all three variants, the manufacturer datasheet remains the deciding document for schematic and layout release.

Сравнение с аналогами

Параметр Этот товар VSC7155XVU-01 VSC7155XVU-03
Brand Analog Devices Analog Devices Analog Devices
Product Type SAS Edge/Fanout Expander SAS Edge/Fanout Expander SAS Edge/Fanout Expander
Physical Layer Count 18 PHYs 18 PHYs 18 PHYs
Supported Data Rate 1 1.5 Gbps 1.5 Gbps 1.5 Gbps
Supported Data Rate 2 3.0 Gbps 3.0 Gbps 3.0 Gbps
Routing Architecture Table routing Table routing Table routing
Protocol Engine SSP engine SSP engine SSP engine
Order Suffix -02 -01 -03

Ключевые отличия

  • Dense 18-PHY SAS expansion (против VSC7155XVU-01)
  • Dual documented SAS data-rate support (против VSC7155XVU-03)
  • Integrated SAS topology and protocol functions (против VSC7155XVU-01)

Заметки по проектированию

Treat every 1.5 Gbps and 3.0 Gbps SAS route as a controlled-impedance transmission line rather than a general-purpose digital trace. Follow the manufacturer reference layout for characteristic impedance, reference-plane continuity, via antipads, layer transitions, and connector launches. Avoid stubs and unnecessary test points, and keep the exact clocking, decoupling, and trace-routing topology from the reference design because the SSP engine and PHY timing depend on a controlled implementation.

Design the supply network around the exact maximum and typical current values listed for the production package in the manufacturer datasheet. Place decoupling capacitance at the device's power pins using the manufacturer's stability and layout guidance, and provide local bulk energy near the package without creating excessive loop area. Estimated: total dissipation equals the sum of each supply voltage multiplied by its measured or calculated current; this arithmetic must be checked against the worst-case data rate and PHY activity rather than the nominal 18-PHY count.

Check junction temperature using the package thermal model, board copper area, airflow, and the actual channel utilization. An 18-PHY design can consume more power as more links become active, so evaluate both nominal and maximum SAS activity. Estimated: junction temperature equals ambient temperature plus power dissipation multiplied by the effective board-and-package thermal resistance. Apply the manufacturer's recommended derating limits and avoid relying on a generic exposed-pad thermal value that does not match the exact package.

Do not approve a suffix change solely because the visible family name and headline PHY count match. Verify the exact package drawing, pin-description table, supply rails, clock requirements, reset behavior, qualification, and lifecycle status for VSC7155XVU-02 and every proposed substitute. Also avoid confusing this SAS expander with general-purpose I/O expanders or Serial ATA controllers; the table-routing and SSP-engine functions must remain equivalent for a drop-in decision.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The product records do not provide explicit environmental or automotive compliance declarations for the exact VSC7155XVU-02 ordering variant. Verify these statuses with the manufacturer before release.

Данные проверены: 2026-11-11 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

VSC7155XVU-02 datasheet VSC7155XVU-02 pinout VSC7155XVU-02 datasheet pdf VSC7155XVU-02 specifications VSC7155XVU-02 equivalent VSC7155XVU-02 replacement VSC7155XVU-02 cross reference VSC7155XVU-02 vs VSC7155XVU-01 Analog Devices VSC7155XVU-02 VSC7155XVU-02 SAS expander VSC7155XVU-02 storage backplane VSC7155XVU-02 price VSC7155XVU-02 stock VSC7155XVU-02 package footprint VSC7155XVU-02 application circuit

Связанные компоненты & термины

Analog Devices Maxim Integrated VSC7155XVU-02 VSC7155XVU-01 VSC7155XVU-03 SAS expander I/O expander interface controller SAS Edge SAS Fanout Serial SCSI Protocol SSP engine table routing 18 PHYs 1.5 Gbps SAS 3.0 Gbps SAS storage backplane fanout enclosure data-center storage industrial storage controller surface-mount integrated circuit controlled-impedance routing serialized storage digital signal transmission
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ