Nuvoton Technology Corporation

W78E054B40DL - 8-Bit 40MHz 16KB Flash MCU | Nuvoton

Артикул: W78E054B40DL ✓ Активен
40-pin DIP Package 40 MHz Speed Flash Memory
MOQ: 1 |

W78E054B40DL Обзор

The Nuvoton Technology Corporation W78E054B40DL is an 8-bit W78-series 8051-compatible microcontroller operating at up to 40 MHz, with 16 KB of Flash program memory organized as 16K x 8 bits. The device is packaged in a 40-pin DIP through-hole package. Its combination of a 40 MHz clock, Flash memory and 8051-compatible architecture makes it suitable for embedded control, industrial automation, appliance control and compact peripheral systems.

A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, digital I/O and supporting peripherals on one device. The W78E054B40DL belongs to the 8-bit microcontroller hierarchy, where an 8-bit processor commonly handles real-time control loops, human-interface functions and supervisory logic. Its W78-series design extends the established 8051 instruction set while using Flash memory for firmware storage, allowing firmware to be updated without removable programmable memory.

The headline configuration is an 8-bit CPU operating at up to 40 MHz, 16 KB of Flash program memory and a 40-pin DIP package. The 40 MHz operating frequency gives designers additional timing margin for serial communication, control loops and peripheral servicing compared with slower 8051-class devices. The 16 KB memory capacity is suitable for compact embedded applications where the firmware remains focused rather than requiring a large application framework or external program storage.

The W78E054B40DL is identified as part of the W78E054B family, with the suffix indicating the 40-pin package configuration and the B40 electrical/device variant. The datasheet family covers the W78E54B and W78E054B devices and should be used to confirm peripheral availability, electrical limits, clock requirements, pin assignments and programming procedures for the exact suffix. Through-hole DIP construction also supports conventional leaded PCB assembly and prototype rework.

Typical applications include industrial controllers, building equipment, motor and relay sequencing, data-acquisition front ends, appliance controls, security-system peripherals and communication modules. Designers can use the MCU for local control, supervisory logic and protocol handling when a higher-performance processor is unnecessary. The family is particularly relevant to new 8051-oriented designs, legacy firmware maintenance and cost-sensitive embedded systems.

Before finalizing a board design, verify the complete 40-pin assignment, oscillator requirements, reset behavior and peripheral multiplexing in the manufacturer datasheet. Ensure that the selected oscillator, decoupling and programming interface match the electrical requirements for the operating frequency. Because DIP packages occupy more board area than surface-mount alternatives, this device is most convenient where through-hole assembly, serviceability or prototype accessibility outweigh minimum PCB-area objectives.

This product page consolidates the verified device identity, package information, memory organization and clock rating, then adds application guidance, design cautions, replacement criteria and pin-level sourcing context. It helps engineers distinguish an exact suffix replacement from a merely similar 8051 device before committing to a PCB or firmware migration.

Аналоги без доработки для W78E054B40DL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

W78E054B40DL Максимальные параметры и электрические характеристики

Device Type 8-bit microcontroller
Architecture 8051-compatible W78 architecture
Maximum CPU Frequency 40 MHz
Program Memory Type Flash
Program Memory Capacity 16 KB
Program Memory Organization 16K x 8 bits
CPU Word Length 8 bits
Package Type 40-pin DIP
Package Pin Count 40 pins
Способ монтажа Through-hole
Series W78 series
Product Family W78E054B

Руководство по цоколевке W78E054B40DL в корпусе 40 pins

Цоколевка для W78E054B40DL (корпус 40 pins). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 40 pins для W78E054B40DL

Нет подробных данных о распиновке для W78E054B40DL.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

W78E054B40DL подходит для 6 применениеs: Industrial Equipment Control, Appliance Control, Data-Acquisition Front End, Motor and Relay Sequencing, Security and Access Peripherals, Communication Module Control.

🏭

Industrial Equipment Control

The W78E054B40DL fits industrial supervisory and sequencing controllers that use an 8-bit CPU for deterministic control rather than high-level connectivity. Its 40 MHz operating rate provides timing margin for polling inputs, updating outputs and servicing communication tasks, while 16 KB of Flash holds compact embedded firmware. The 40-pin DIP package also simplifies through-hole assembly and maintenance. Before deployment, verify the exact peripheral set, operating-temperature limits, watchdog functions and electrical ratings in the manufacturer datasheet, then confirm that the control loop and communications budget fit the available timing.

🔧

Appliance Control

The W78E054B40DL is applicable to appliance controllers that combine local keypad or sensor inputs, relays, indicators and a simple user interface. Its 16 KB Flash capacity supports a focused state machine and device-control firmware, while the 8-bit architecture is appropriate for supervisory rather than graphics-intensive tasks. The 40 MHz rating leaves more execution margin than slower legacy 8051 implementations. Design teams should confirm timer, serial, interrupt and I/O resources for the selected suffix and should validate startup, brownout and relay-driving behavior against the exact electrical requirements.

📊

Data-Acquisition Front End

The W78E054B40DL can serve as the supervisory controller for a compact data-acquisition front end when the module needs local channel selection, calibration handling, status reporting and packet formatting. At up to 40 MHz, the CPU provides additional timing margin for servicing an external converter and serial interface, and 16 KB of Flash is adequate for a compact acquisition firmware image. The main engineering trade-off is the limited program capacity compared with larger modern MCUs. Check the suffix's ADC, timer and serial resources before choosing it, and use the manufacturer pin table to plan converter, reference and isolation interfaces.

⚡

Motor and Relay Sequencing

For motor, relay and valve sequencing, the W78E054B40DL provides a straightforward 8051-compatible control platform with 40 MHz processing and internal Flash storage. Firmware can implement interlocks, timing sequences, fault handling and status updates without an external program-memory device. Its DIP package supports through-hole boards that are easy to prototype or service. Designers must review the exact I/O count, timer channels, interrupt behavior and operating limits, then place appropriate protection and signal-conditioning components between the MCU pins and inductive or high-voltage loads.

🔒

Security and Access Peripherals

The W78E054B40DL can serve as the local controller for access-control, alarm and security peripherals that require credential handling, event logging, relay control and status communication. The 40 MHz 8-bit core is suitable for coordinated real-time I/O, and the 16 KB Flash area can store a compact application when no external storage or rich connectivity is required. The design should minimize exposure of debug or programming interfaces and should verify watchdog, reset and memory-retention behavior. Exact peripheral availability, security features and operating limits must be confirmed for the selected suffix in the manufacturer datasheet.

🌐

Communication Module Control

The W78E054B40DL can manage a protocol-conversion or communication module when the device must handle local configuration, status indicators, buffer management and a serial link. Its 40 MHz rate offers useful timing headroom for interrupt-driven protocol work, while the integrated 16 KB Flash removes the need for external program memory in smaller designs. The MCU is best suited to endpoint control rather than high-throughput gateway processing. Engineers should compare the available UART, timer and interrupt resources with the protocol timing budget, confirm oscillator tolerance and verify that the package's unused pins are configured safely.

Сводка рекомендуемых товаров

W78E054B40DL Nuvoton Technology Corporation Используется в: Industrial Equipment Control, Appliance Control, Data-Acquisition Front End, Motor and Relay Sequencing, Security and Access Peripherals, Communication Module Control W78E054B W78E054B family device referenced by the manufacturer datasheet Используется в: Industrial Equipment Control, Appliance Control, Data-Acquisition Front End, Motor and Relay Sequencing, Security and Access Peripherals, Communication Module Control
What is the W78E054B40DL microcontroller?
The W78E054B40DL is an 8-bit W78-series 8051-compatible microcontroller from Nuvoton Technology Corporation, operating at up to 40 MHz and containing 16 KB of Flash program memory. According to the manufacturer datasheet family, it is offered in a 40-pin DIP package. The device is intended for compact embedded-control, industrial-control, appliance-control and supervisory applications where an 8-bit CPU, integrated program memory and through-hole package are suitable.
What are the key specifications of W78E054B40DL that engineers should know?
The W78E054B40DL combines an 8-bit CPU, a maximum operating frequency of 40 MHz and 16 KB of 16K x 8-bit Flash memory in a 40-pin DIP package. The manufacturer datasheet family identifies the W78E054B series for embedded applications, while the exact suffix specifies the 40-pin configuration. Pin functions, electrical limits and peripheral assignments should be confirmed in the W78E54B/W78E054B datasheet before schematic or PCB design.
Where can I download the W78E054B40DL datasheet PDF?
The W78E054B40DL datasheet PDF is available through the W78E54B/W78E054B data-sheet link on this page and through the Octopart datasheet listing. The document covers the 40 MHz W78E054B-family microcontroller and is the correct starting point for pin assignments, electrical characteristics, clocking, reset, memory and peripheral details. Use the exact W78E054B40DL suffix when checking package-specific pin assignments and ordering information.
Where can I find the W78E054B40DL pinout?
Use the 40-pin pin-description table in the manufacturer W78E54B/W78E054B datasheet to find the W78E054B40DL pinout. The part uses a 40-pin DIP footprint, but individual signal names and alternate functions must be matched to the exact suffix rather than inferred from a generic 8051 diagram. The pin table should be cross-checked against the package drawing before assigning power, ground, oscillator, programming and general-purpose I/O connections.
How much Flash memory does the W78E054B40DL contain?
The W78E054B40DL contains 16 KB of Flash program memory organized as 16K x 8 bits. According to the DigiKey product listing and the manufacturer datasheet family, this memory supports in-system firmware storage in an 8-bit 8051-compatible architecture. The 16 KB capacity is appropriate for compact control firmware, but the final program-size assessment must include boot code, interrupt routines, protocol handlers and application logic.
What clock frequency does the W78E054B40DL use?
The W78E054B40DL is rated for operation at up to 40 MHz. The manufacturer W78E54B/W78E054B datasheet is the authoritative source for oscillator selection, internal versus external clock operation, timing limits and startup behavior. A 40 MHz CPU rating can shorten instruction-cycle execution time and provide more timing margin for serial communication and control tasks, but it does not by itself determine final application throughput.
Is the W78E054B40DL suitable for industrial control systems?
The W78E054B40DL is suitable for many industrial supervisory and embedded-control functions because it combines a 40 MHz 8-bit CPU with 16 KB of Flash memory. Its 40-pin DIP package supports through-hole assembly and field serviceability. For a deployed industrial product, verify operating-temperature limits, supply-voltage tolerances, isolation requirements, watchdog behavior and peripheral functions against the manufacturer datasheet before releasing the design.
What is the W78E054B40DL used for?
The W78E054B40DL is used for embedded controllers that need deterministic low-to-moderate processing performance, local I/O control and internal firmware storage. Typical uses include industrial equipment, appliances, relay and motor sequencing, data acquisition, security peripherals and communication modules. Its 8051-compatible W78 architecture is also relevant when maintaining or adapting established 8051 firmware while moving to a 40 MHz Flash-based implementation.
Can the W78E054B40DL replace a slower 8051 microcontroller?
The W78E054B40DL can replace a slower 8051-class device only after confirming pin, electrical, clock, memory and firmware compatibility. Its 40 MHz CPU and 16 KB Flash memory provide more timing and program-storage capacity than many older masked-ROM or small-Flash devices, but the 40-pin DIP pinout must still match the original PCB. Software migration may also require changes for peripheral registers, interrupts and memory addressing.
What is the best drop-in replacement for W78E054B40DL?
The best drop-in replacement is the exact same manufacturer suffix with the same electrical grade and package, because that provides the highest confidence of pin-to-pin compatibility. No independently verified pin-compatible substitute was identified for publication on this page. Before using another W78E054B suffix, compare its clock rating, Flash capacity, RAM, peripheral set, pin assignments, operating-temperature range and supply limits in the manufacturer datasheet; a similar 8051 device is not automatically a drop-in replacement.
What can replace the W78E054B40DL?
A valid replacement must match the 40-pin DIP footprint, provide pin-compatible power, oscillator, reset and I/O connections, and meet or exceed the 40 MHz clock and 16 KB Flash requirements of the W78E054B40DL. No candidate with those properties is documented in the available cross-reference results. Request a quote on this page for the exact suffix, and evaluate any proposed alternative against the W78E54B/W78E054B datasheet and existing firmware before assembly.
When should I choose the W78E054B40DL over a higher-performance MCU?
Choose the W78E054B40DL when an 8-bit 8051-compatible control task fits within 16 KB of Flash and does not require extensive connectivity, high-resolution analog conversion or a large real-time operating system. Its 40 MHz rate and through-hole DIP package simplify many industrial, appliance and legacy-control designs. Choose a higher-performance MCU when networking, USB, complex graphics, dense peripherals, large data storage or substantial firmware growth is expected.
Is W78E054B40DL the same as W78E054B40DL in a different package?
The suffix includes the package and device-variant information, so a W78E054B part in another package is not automatically interchangeable with the W78E054B40DL. The W78E054B40DL is specified in a 40-pin DIP package. If a distributor or source document lists a different W78E054B suffix, compare the full ordering code and mechanical drawing; changing from DIP to a surface-mount package requires a different footprint and usually a PCB revision.
Where to buy W78E054B40DL online?
Use the Request a Quote form on this page to inquire about the W78E054B40DL and request current commercial terms for the exact 40-pin DIP suffix. The request should include the required quantity, target date and acceptable packaging configuration. A sourcing agent must also confirm the suffix, lifecycle status, factory packaging and documentation before releasing a purchase order.
What is the price of the W78E054B40DL?
Use the Request a Quote form on this page for the current commercial offer for W78E054B40DL. Quote terms can vary with order quantity, production volume, packaging, target date and market conditions, so a static figure would not represent a current commitment. Include your quantity, delivery schedule and traceability requirements in the request to obtain an actionable quotation.
What is the lead time and stock status for W78E054B40DL?
Current lead time and stock status should be obtained through the Request a Quote form on this page for the exact W78E054B40DL suffix. Because availability can change with factory production and packaging inventory, engineers should request confirmation against their production schedule rather than relying on a generic listing. Include requested quantities, earliest delivery date and whether unbroken manufacturer packaging is required.
Is the W78E054B40DL RoHS and REACH compliant?
RoHS and REACH status cannot be confirmed from the device listing alone and is recorded as unknown for this part. Request the current manufacturer environmental-compliance declaration using the Request a Quote form on this page, specifying the exact W78E054B40DL suffix and the required documentation. For an industrial or automotive product, also request the applicable qualification and material-declaration records needed by the system specification.

Справочные инженерные данные для W78E054B40DL — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the W78E054B40DL when the design needs a 40 MHz 8-bit 8051-compatible controller, 16 KB of integrated Flash and a readily assembled 40-pin DIP package. It is particularly suitable for industrial supervisory control, appliances, acquisition modules, relay sequencing and smaller communication peripherals where a large operating system is unnecessary. An exact manufacturer suffix with matching electrical specifications is preferable to a cross-device substitute because legacy-compatible MCUs can differ in peripheral registers, interrupt behavior and pin multiplexing. A higher-performance MCU is preferable when firmware exceeds 16 KB, networking or USB is required, or dense analog and mixed-signal functions are central to the product. Before committing to the DIP implementation, compare board area and height against surface-mount options and confirm that the available programming and test workflow supports a 40-pin through-hole device.

Заметки по проектированию

Do not treat every 8051-compatible device as a footprint-compatible replacement. The W78E054B40DL uses a 40-pin DIP configuration, so replacement review must include the complete pin table, package drawing, oscillator pins, reset behavior, supply pins and I/O multiplexing. Also compare the W78 suffix differences rather than comparing only the marketing family name. A part with similar CPU speed can still require firmware changes if peripheral registers, interrupt vectors or memory organization differ.

Plan the board around a through-hole 40-pin DIP footprint and its connector clearance. DIP packages require more board area and vertical clearance than surface-mount alternatives, but they simplify leaded assembly, inspection and replacement. Place decoupling capacitors close to the device power pins, maintain a short return path for ground connections, and verify oscillator and reset routing against the manufacturer reference layout before releasing the mechanical drawing.

Confirm the exact supply-voltage range and all DC and AC operating limits in the W78E54B/W78E054B datasheet before selecting regulators or I/O levels. Do not infer a 5 V-only requirement from the 8051 architecture. Check whether any connected peripheral can inject current through I/O pins, and include suitable protection where the board connects to external relays, motors, long wiring harnesses or other noisy systems.

Estimated: oscillator power cannot be calculated from the available device identity because the operating voltage, load current and clock configuration are not stated. During design, calculate regulator dissipation from the actual input voltage, MCU and oscillator current, and maximum ambient temperature; then compare that value with the selected regulator's thermal rating and the board's copper area. Validate the result against the manufacturer's electrical characteristics before production.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance status is not stated in the device listings or the identified family datasheet excerpt. Request current manufacturer declarations for the exact W78E054B40DL suffix.

Данные проверены: 2026-11-11 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

W78E054B40DL datasheet W78E054B40DL pinout W78E054B40DL datasheet pdf W78E054B40DL specifications W78E054B40DL 40MHz W78E054B40DL 16KB flash W78E054B40DL 40 pin dip W78E054B40DL equivalent W78E054B40DL replacement W78E054B40DL cross reference W78E054B40DL application circuit W78E054B40DL price W78E054B40DL stock Nuvoton W78E054B40DL W78E054B40DL schematic

Связанные компоненты & термины

Nuvoton Technology Corporation W78E054B40DL W78E054B W78E54B 8-bit microcontroller 8051-compatible architecture W78-series microcontroller embedded microcontroller Flash program memory 40 MHz clock 16 KB Flash 16K x 8-bit memory 40-pin DIP through-hole package industrial control appliance control data acquisition motor and relay sequencing security peripheral communication module UART timer interrupt brownout reset watchdog timer
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ