W78E054B40DL - 8-Bit 40MHz 16KB Flash MCU | Nuvoton
MPN: W78E054B40DL ✓ Hoạt độngW78E054B40DL Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, digital I/O and supporting peripherals on one device. The W78E054B40DL belongs to the 8-bit microcontroller hierarchy, where an 8-bit processor commonly handles real-time control loops, human-interface functions and supervisory logic. Its W78-series design extends the established 8051 instruction set while using Flash memory for firmware storage, allowing firmware to be updated without removable programmable memory.
The headline configuration is an 8-bit CPU operating at up to 40 MHz, 16 KB of Flash program memory and a 40-pin DIP package. The 40 MHz operating frequency gives designers additional timing margin for serial communication, control loops and peripheral servicing compared with slower 8051-class devices. The 16 KB memory capacity is suitable for compact embedded applications where the firmware remains focused rather than requiring a large application framework or external program storage.
The W78E054B40DL is identified as part of the W78E054B family, with the suffix indicating the 40-pin package configuration and the B40 electrical/device variant. The datasheet family covers the W78E54B and W78E054B devices and should be used to confirm peripheral availability, electrical limits, clock requirements, pin assignments and programming procedures for the exact suffix. Through-hole DIP construction also supports conventional leaded PCB assembly and prototype rework.
Typical applications include industrial controllers, building equipment, motor and relay sequencing, data-acquisition front ends, appliance controls, security-system peripherals and communication modules. Designers can use the MCU for local control, supervisory logic and protocol handling when a higher-performance processor is unnecessary. The family is particularly relevant to new 8051-oriented designs, legacy firmware maintenance and cost-sensitive embedded systems.
Before finalizing a board design, verify the complete 40-pin assignment, oscillator requirements, reset behavior and peripheral multiplexing in the manufacturer datasheet. Ensure that the selected oscillator, decoupling and programming interface match the electrical requirements for the operating frequency. Because DIP packages occupy more board area than surface-mount alternatives, this device is most convenient where through-hole assembly, serviceability or prototype accessibility outweigh minimum PCB-area objectives.
This product page consolidates the verified device identity, package information, memory organization and clock rating, then adds application guidance, design cautions, replacement criteria and pin-level sourcing context. It helps engineers distinguish an exact suffix replacement from a merely similar 8051 device before committing to a PCB or firmware migration.
Bộ thay thế dễ dàng lắp đặt cho W78E054B40DL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếW78E054B40DL Tỷ lệ tối đa & tính chất điện
| Device Type | 8-bit microcontroller |
| Architecture | 8051-compatible W78 architecture |
| Maximum CPU Frequency | 40 MHz |
| Program Memory Type | Flash |
| Program Memory Capacity | 16 KB |
| Program Memory Organization | 16K x 8 bits |
| CPU Word Length | 8 bits |
| Package Type | 40-pin DIP |
| Package Pin Count | 40 pins |
| Kiểu lắp đặt | Through-hole |
| Series | W78 series |
| Product Family | W78E054B |
Hướng dẫn cấu hình chân W78E054B40DL 40 pins
Cấu hình chân cho W78E054B40DL (40 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho W78E054B40DL.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
W78E054B40DL phù hợp cho 6 Áp dụngs: Industrial Equipment Control, Appliance Control, Data-Acquisition Front End, Motor and Relay Sequencing, Security and Access Peripherals, Communication Module Control.
Industrial Equipment Control
The W78E054B40DL fits industrial supervisory and sequencing controllers that use an 8-bit CPU for deterministic control rather than high-level connectivity. Its 40 MHz operating rate provides timing margin for polling inputs, updating outputs and servicing communication tasks, while 16 KB of Flash holds compact embedded firmware. The 40-pin DIP package also simplifies through-hole assembly and maintenance. Before deployment, verify the exact peripheral set, operating-temperature limits, watchdog functions and electrical ratings in the manufacturer datasheet, then confirm that the control loop and communications budget fit the available timing.
Được đề xuất
Appliance Control
The W78E054B40DL is applicable to appliance controllers that combine local keypad or sensor inputs, relays, indicators and a simple user interface. Its 16 KB Flash capacity supports a focused state machine and device-control firmware, while the 8-bit architecture is appropriate for supervisory rather than graphics-intensive tasks. The 40 MHz rating leaves more execution margin than slower legacy 8051 implementations. Design teams should confirm timer, serial, interrupt and I/O resources for the selected suffix and should validate startup, brownout and relay-driving behavior against the exact electrical requirements.
Được đề xuất
Data-Acquisition Front End
The W78E054B40DL can serve as the supervisory controller for a compact data-acquisition front end when the module needs local channel selection, calibration handling, status reporting and packet formatting. At up to 40 MHz, the CPU provides additional timing margin for servicing an external converter and serial interface, and 16 KB of Flash is adequate for a compact acquisition firmware image. The main engineering trade-off is the limited program capacity compared with larger modern MCUs. Check the suffix's ADC, timer and serial resources before choosing it, and use the manufacturer pin table to plan converter, reference and isolation interfaces.
Được đề xuất
Motor and Relay Sequencing
For motor, relay and valve sequencing, the W78E054B40DL provides a straightforward 8051-compatible control platform with 40 MHz processing and internal Flash storage. Firmware can implement interlocks, timing sequences, fault handling and status updates without an external program-memory device. Its DIP package supports through-hole boards that are easy to prototype or service. Designers must review the exact I/O count, timer channels, interrupt behavior and operating limits, then place appropriate protection and signal-conditioning components between the MCU pins and inductive or high-voltage loads.
Được đề xuất
Security and Access Peripherals
The W78E054B40DL can serve as the local controller for access-control, alarm and security peripherals that require credential handling, event logging, relay control and status communication. The 40 MHz 8-bit core is suitable for coordinated real-time I/O, and the 16 KB Flash area can store a compact application when no external storage or rich connectivity is required. The design should minimize exposure of debug or programming interfaces and should verify watchdog, reset and memory-retention behavior. Exact peripheral availability, security features and operating limits must be confirmed for the selected suffix in the manufacturer datasheet.
Được đề xuất
Communication Module Control
The W78E054B40DL can manage a protocol-conversion or communication module when the device must handle local configuration, status indicators, buffer management and a serial link. Its 40 MHz rate offers useful timing headroom for interrupt-driven protocol work, while the integrated 16 KB Flash removes the need for external program memory in smaller designs. The MCU is best suited to endpoint control rather than high-throughput gateway processing. Engineers should compare the available UART, timer and interrupt resources with the protocol timing budget, confirm oscillator tolerance and verify that the package's unused pins are configured safely.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho W78E054B40DL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Ghi chú thiết kế
Do not treat every 8051-compatible device as a footprint-compatible replacement. The W78E054B40DL uses a 40-pin DIP configuration, so replacement review must include the complete pin table, package drawing, oscillator pins, reset behavior, supply pins and I/O multiplexing. Also compare the W78 suffix differences rather than comparing only the marketing family name. A part with similar CPU speed can still require firmware changes if peripheral registers, interrupt vectors or memory organization differ.
Plan the board around a through-hole 40-pin DIP footprint and its connector clearance. DIP packages require more board area and vertical clearance than surface-mount alternatives, but they simplify leaded assembly, inspection and replacement. Place decoupling capacitors close to the device power pins, maintain a short return path for ground connections, and verify oscillator and reset routing against the manufacturer reference layout before releasing the mechanical drawing.
Confirm the exact supply-voltage range and all DC and AC operating limits in the W78E54B/W78E054B datasheet before selecting regulators or I/O levels. Do not infer a 5 V-only requirement from the 8051 architecture. Check whether any connected peripheral can inject current through I/O pins, and include suitable protection where the board connects to external relays, motors, long wiring harnesses or other noisy systems.
Estimated: oscillator power cannot be calculated from the available device identity because the operating voltage, load current and clock configuration are not stated. During design, calculate regulator dissipation from the actual input voltage, MCU and oscillator current, and maximum ambient temperature; then compare that value with the selected regulator's thermal rating and the board's copper area. Validate the result against the manufacturer's electrical characteristics before production.
Thông tin tuân thủ
Compliance status is not stated in the device listings or the identified family datasheet excerpt. Request current manufacturer declarations for the exact W78E054B40DL suffix.