WM8988LGECN/V - Stereo 24-Bit Audio Codec | Cirrus Logic
Артикул: WM8988LGECN/V ✓ АктивенWM8988LGECN/V Обзор
An audio codec is an interface IC that converts digital audio data into an analog audio signal, converts analog audio back into digital data, or performs both functions. In the broader hierarchy, a codec belongs to the audio interface family, then to interface ICs, and finally to integrated circuits. Stereo codecs support two audio channels and are commonly used where a system needs headphone, microphone, line, or speaker-path processing without a large discrete analog implementation.
The WM8988LGECN/V is identified as a 24-bit stereo audio interface with low-power operation. Its synchronous CMOS implementation provides a defined digital interface for portable audio systems. The 28-QFN package also reduces board footprint compared with larger leaded or high-pin-count packages, making the device suitable for space-constrained consumer and portable products.
The part operates over a -25°C to +85°C temperature range and uses a 4 mm by 4 mm QFN package with 28 terminals. Its operating architecture is described as synchronous, which helps coordinate digital audio transfer with the associated system clock and data signals. The package and temperature specification support applications that require a compact, surface-mount audio interface rather than a through-hole codec solution.
Typical applications include portable music players, headphone-equipped personal audio products, connected audio accessories, and compact consumer systems requiring stereo playback or recording. The 24-bit interface and low-power design are especially relevant when product designers need audio conversion performance while preserving board area and system power budget.
PCB implementation should follow the manufacturer datasheet for exposed-pad connection, decoupling, clock routing, and analog layout. A QFN package also requires careful assembly inspection because its fine-pitch leads and exposed thermal pad are difficult to inspect visually after soldering. Confirm pin assignments and recommended component values against the manufacturer datasheet before releasing the layout.
Аналоги без доработки для WM8988LGECN/V — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиWM8988LGECN/V Максимальные параметры и электрические характеристики
| Product Type | Stereo audio interface and low-power audio codec |
| Interface Resolution | 24 bit |
| Audio Channel Configuration | Stereo, 2 channels |
| Корпус | 28-QFN, 4 mm x 4 mm |
| Terminal Count | 28 terminals |
| Тип монтажа | Surface mount |
| Диапазон рабочих температур | -25°C to +85°C |
| Operation Mode | Synchronous |
| Process Technology | CMOS |
| Power Class | Low-power operation |
| Target Application | Portable audio equipment |
| Manufacturer | Cirrus Logic / Wolfson Microelectronics |
| Статус RoHS | Compliant |
Руководство по цоколевке WM8988LGECN/V в корпусе 28-qfn, 4 mm x 4 mm
Цоколевка для WM8988LGECN/V (корпус 28-qfn, 4 mm x 4 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для WM8988LGECN/V.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
WM8988LGECN/V подходит для 6 применениеs: Portable Music Player, Headphone Audio Accessory, Connected Audio Device, Digital Voice Recorder, Stereo Audio Interface Module, Personal Audio Playback.
Portable Music Player
The WM8988LGECN/V fits a portable music player because it combines a 24-bit stereo audio interface with a compact 28-QFN package measuring 4 mm by 4 mm. The low-power CMOS device can sit beside the player’s audio processor and route digital audio toward headphone or line-level analog outputs. Its specified -25°C to +85°C range covers many consumer operating environments, while the small footprint preserves board area for storage, battery management, and user controls. The design should use the manufacturer’s recommended decoupling and clock connections, and it should verify the exact supported sampling rates before selecting the audio transport format.
Рекомендуется
Headphone Audio Accessory
A headphone audio accessory can use the WM8988LGECN/V as the stereo interface between a digital audio source and an analog headphone signal path. The device’s 24-bit interface provides a suitable digital-audio path, while the 28-QFN package reduces the footprint needed beside a connector, volume control, or amplifier. Low-power operation is valuable in USB- or battery-powered accessories because it supports a compact, portable architecture. Layout must keep the analog audio section away from digital clocks and switching nodes, and the manufacturer’s recommended capacitor values should be followed to maintain stable low-noise operation.
Рекомендуется
Connected Audio Device
The WM8988LGECN/V suits connected audio devices that accept digital audio from a controller and produce stereo analog audio for downstream circuitry. Its synchronous CMOS operation provides a defined digital interface, and the 24-bit resolution is appropriate for modern portable audio paths. The 4 mm by 4 mm 28-QFN package is valuable when wireless, storage, charging, and user-interface circuits compete for board area. Designers should confirm the device’s supported digital interface mode and clocking arrangement in the manufacturer datasheet, then isolate the analog section from radio and high-current digital return paths.
Рекомендуется
Digital Voice Recorder
A compact voice recorder can use the WM8988LGECN/V when its stereo analog inputs and digital audio interface match the microphone and storage architecture. The 24-bit interface supports digital capture while the low-power CMOS implementation is appropriate for portable recording equipment. The 28-QFN package also leaves more PCB area available for microphones, storage, and a battery-powered processor. However, microphone biasing, input gain, dynamic range, and supported sample rates must be confirmed from the manufacturer electrical characteristics before selecting the codec, because the basic package and resolution alone do not establish recording performance.
Рекомендуется
Stereo Audio Interface Module
The WM8988LGECN/V can serve as the codec element of a dedicated stereo audio interface module. Its 24-bit digital interface and synchronous CMOS operation suit systems that exchange audio frames with an FPGA, MCU, or dedicated audio processor, while the 28-QFN package supports compact module construction. The -25°C to +85°C specification accommodates many industrial and commercial enclosure conditions. Layout should use short digital routes, solid ground-plane continuity, and manufacturer-recommended local decoupling. The external clock and supported audio word-length configuration should be verified against the host processor before the module interface is frozen.
Рекомендуется
Personal Audio Playback
The WM8988LGECN/V is appropriate for personal audio playback products that need a small stereo codec footprint and low-power operation. It can accept digital audio from a portable media processor and provide the analog stereo signal expected by a headphone or line-output stage. Its 24-bit interface supports modern playback formats, and the 4 mm by 4 mm QFN package simplifies compact board assembly. In a wearable or pocket product, thermal design and power consumption remain important because enclosure temperature can rise above ambient. Use the datasheet’s clock, supply, and deactivation guidance to prevent clicks, pops, and unintended current consumption during standby.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для WM8988LGECN/V — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Package | 28-QFN, 4 mm x 4 mm |
| Brand | Cirrus Logic |
| Product Type | Stereo audio interface and low-power codec |
| Interface Resolution | 24 bit |
| Audio Channels | Stereo, 2 channels |
| Operating Temperature Range | -25°C to +85°C |
| Operation Mode | Synchronous |
| Process Technology | CMOS |
| Power Class | Low-power operation |
| Terminal Count | 28 terminals |
| Target Application | Portable audio equipment |
| RoHS Status | Compliant |
Ключевые отличия
- Compact 24-bit stereo codec implementation (против Larger 32-pin and leaded stereo codec packages)
- Portable-audio-oriented low-power design (против General-purpose higher-channel-count audio processors)
- Defined commercial operating range (против Unspecified-temperature catalog substitutes)
Заметки по проектированию
Use the manufacturer’s QFN land pattern and exposed-pad recommendation rather than creating a footprint from terminal spacing alone. The WM8988LGECN/V is a 28-QFN device in a 4 mm by 4 mm package, so pad geometry, solder-mask clearance, and paste coverage materially affect assembly yield. Confirm the pin-1 orientation and exposed-pad connection from the package drawing, then verify the stencil aperture against the recommended assembly process before production release.
Separate the analog audio section from digital clock, data, and switching paths. Place input and output decoupling capacitors at the pins identified in the manufacturer application circuit, and keep the digital interface traces short and continuous. A solid ground reference is especially important because the codec combines digital control and clock signals with analog audio functions. Review return-current paths for nearby amplifiers, radio circuitry, and regulators to prevent codec output noise from coupling back into the analog inputs.
Do not select a replacement solely because both parts are called stereo audio codecs. Verify pin functions, supply rails, clocking, digital data format, analog input and output architecture, exposed-pad requirements, and operating-temperature limits. The WM8988LGECN/RV listing describes the same 28-QFN, 4 mm by 4 mm format, but suffix-specific ordering conditions must still be checked. A functionally similar codec with different pin assignments requires PCB changes and is not a drop-in replacement.
Plan the codec’s power states around the system’s audio-use model. The WM8988LGECN/V is described as a low-power stereo codec, but the actual supply current depends on enabled functions, clock activity, output loading, and supply voltage. Use the manufacturer’s power-consumption and shutdown information to estimate battery impact. Sequence regulators and clock sources to prevent unwanted startup transients, and include the codec supply in brownout and load-switch analysis rather than treating it as a negligible auxiliary load.
Информация о соответствии
RoHS compliance is identified in the product search listing. No manufacturer statement confirming REACH, lead-free status, halogen-free status, or conflict-mineral compliance was identified.