Cirrus Logic Inc.

WM8988LGECN/V - Stereo 24-Bit Audio Codec | Cirrus Logic

Référence : WM8988LGECN/V ✓ Actif
28-QFN, 4 mm x 4 mm Package
MOQ : 1 |

WM8988LGECN/V Présentation

The Cirrus Logic WM8988LGECN/V is a low-power stereo audio codec with a 24-bit interface, synchronous operation, and CMOS technology in a 28-pin QFN package measuring 4 mm by 4 mm. Designed for portable audio equipment, it combines stereo signal processing and digital audio interfacing in a compact surface-mount package rated for -25°C to +85°C operation.

An audio codec is an interface IC that converts digital audio data into an analog audio signal, converts analog audio back into digital data, or performs both functions. In the broader hierarchy, a codec belongs to the audio interface family, then to interface ICs, and finally to integrated circuits. Stereo codecs support two audio channels and are commonly used where a system needs headphone, microphone, line, or speaker-path processing without a large discrete analog implementation.

The WM8988LGECN/V is identified as a 24-bit stereo audio interface with low-power operation. Its synchronous CMOS implementation provides a defined digital interface for portable audio systems. The 28-QFN package also reduces board footprint compared with larger leaded or high-pin-count packages, making the device suitable for space-constrained consumer and portable products.

The part operates over a -25°C to +85°C temperature range and uses a 4 mm by 4 mm QFN package with 28 terminals. Its operating architecture is described as synchronous, which helps coordinate digital audio transfer with the associated system clock and data signals. The package and temperature specification support applications that require a compact, surface-mount audio interface rather than a through-hole codec solution.

Typical applications include portable music players, headphone-equipped personal audio products, connected audio accessories, and compact consumer systems requiring stereo playback or recording. The 24-bit interface and low-power design are especially relevant when product designers need audio conversion performance while preserving board area and system power budget.

PCB implementation should follow the manufacturer datasheet for exposed-pad connection, decoupling, clock routing, and analog layout. A QFN package also requires careful assembly inspection because its fine-pitch leads and exposed thermal pad are difficult to inspect visually after soldering. Confirm pin assignments and recommended component values against the manufacturer datasheet before releasing the layout.

Alternatives de remplacement direct pour WM8988LGECN/V — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

WM8988LGECN/V Valeurs maximales et caractéristiques électriques

Product Type Stereo audio interface and low-power audio codec
Interface Resolution 24 bit
Audio Channel Configuration Stereo, 2 channels
Boîtier 28-QFN, 4 mm x 4 mm
Terminal Count 28 terminals
Type de montage Surface mount
Plage de température de fonctionnement -25°C to +85°C
Operation Mode Synchronous
Process Technology CMOS
Power Class Low-power operation
Target Application Portable audio equipment
Manufacturer Cirrus Logic / Wolfson Microelectronics
Statut RoHS Compliant

Guide de configuration des broches du WM8988LGECN/V 28-qfn, 4 mm x 4 mm

Configuration des broches du WM8988LGECN/V (boîtier 28-qfn, 4 mm x 4 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 28-qfn, 4 mm x 4 mm pour le WM8988LGECN/V

Aucune donnée de brochage détaillée disponible pour WM8988LGECN/V.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

WM8988LGECN/V convient pour 6 applications: Portable Music Player, Headphone Audio Accessory, Connected Audio Device, Digital Voice Recorder, Stereo Audio Interface Module, Personal Audio Playback.

📱

Portable Music Player

The WM8988LGECN/V fits a portable music player because it combines a 24-bit stereo audio interface with a compact 28-QFN package measuring 4 mm by 4 mm. The low-power CMOS device can sit beside the player’s audio processor and route digital audio toward headphone or line-level analog outputs. Its specified -25°C to +85°C range covers many consumer operating environments, while the small footprint preserves board area for storage, battery management, and user controls. The design should use the manufacturer’s recommended decoupling and clock connections, and it should verify the exact supported sampling rates before selecting the audio transport format.

🎧

Headphone Audio Accessory

A headphone audio accessory can use the WM8988LGECN/V as the stereo interface between a digital audio source and an analog headphone signal path. The device’s 24-bit interface provides a suitable digital-audio path, while the 28-QFN package reduces the footprint needed beside a connector, volume control, or amplifier. Low-power operation is valuable in USB- or battery-powered accessories because it supports a compact, portable architecture. Layout must keep the analog audio section away from digital clocks and switching nodes, and the manufacturer’s recommended capacitor values should be followed to maintain stable low-noise operation.

🌐

Connected Audio Device

The WM8988LGECN/V suits connected audio devices that accept digital audio from a controller and produce stereo analog audio for downstream circuitry. Its synchronous CMOS operation provides a defined digital interface, and the 24-bit resolution is appropriate for modern portable audio paths. The 4 mm by 4 mm 28-QFN package is valuable when wireless, storage, charging, and user-interface circuits compete for board area. Designers should confirm the device’s supported digital interface mode and clocking arrangement in the manufacturer datasheet, then isolate the analog section from radio and high-current digital return paths.

💊

Digital Voice Recorder

A compact voice recorder can use the WM8988LGECN/V when its stereo analog inputs and digital audio interface match the microphone and storage architecture. The 24-bit interface supports digital capture while the low-power CMOS implementation is appropriate for portable recording equipment. The 28-QFN package also leaves more PCB area available for microphones, storage, and a battery-powered processor. However, microphone biasing, input gain, dynamic range, and supported sample rates must be confirmed from the manufacturer electrical characteristics before selecting the codec, because the basic package and resolution alone do not establish recording performance.

🖥️

Stereo Audio Interface Module

The WM8988LGECN/V can serve as the codec element of a dedicated stereo audio interface module. Its 24-bit digital interface and synchronous CMOS operation suit systems that exchange audio frames with an FPGA, MCU, or dedicated audio processor, while the 28-QFN package supports compact module construction. The -25°C to +85°C specification accommodates many industrial and commercial enclosure conditions. Layout should use short digital routes, solid ground-plane continuity, and manufacturer-recommended local decoupling. The external clock and supported audio word-length configuration should be verified against the host processor before the module interface is frozen.

🧩

Personal Audio Playback

The WM8988LGECN/V is appropriate for personal audio playback products that need a small stereo codec footprint and low-power operation. It can accept digital audio from a portable media processor and provide the analog stereo signal expected by a headphone or line-output stage. Its 24-bit interface supports modern playback formats, and the 4 mm by 4 mm QFN package simplifies compact board assembly. In a wearable or pocket product, thermal design and power consumption remain important because enclosure temperature can rise above ambient. Use the datasheet’s clock, supply, and deactivation guidance to prevent clicks, pops, and unintended current consumption during standby.

What is the WM8988LGECN/V?
The WM8988LGECN/V is a low-power, 24-bit stereo audio codec manufactured by Cirrus Logic, formerly associated with Wolfson Microelectronics. According to the manufacturer datasheet, it uses synchronous CMOS operation and is packaged in a 28-QFN measuring 4 mm by 4 mm. It is intended primarily for portable audio equipment that needs compact stereo audio conversion or signal processing.
What package does the WM8988LGECN/V use?
The WM8988LGECN/V uses a 28-terminal QFN package with dimensions of 4 mm by 4 mm. According to the manufacturer datasheet, the package is intended for surface-mount assembly. Its exposed-pad requirements, pin numbering, solder-mask pattern, and recommended land pattern should be taken directly from the package drawing and land-pattern guidance in that document.
What is the resolution of the WM8988LGECN/V audio interface?
The WM8988LGECN/V has a 24-bit stereo audio interface. According to the manufacturer datasheet, this interface resolution supports digital audio transfer while the device provides the analog-to-digital and digital-to-analog conversion functions expected from a portable stereo codec. The supported sampling rates and detailed data format must be confirmed in the datasheet's digital interface and clocking sections.
What is the operating temperature range of the WM8988LGECN/V?
The WM8988LGECN/V is specified for operation from -25°C to +85°C. According to the manufacturer datasheet, the device is built with CMOS technology and supports synchronous operation. This temperature range makes it appropriate for many portable consumer products, although enclosure temperature, self-heating, and system reliability requirements still need to be considered.
Where can I download the WM8988LGECN/V datasheet PDF?
The WM8988LGECN/V datasheet PDF is available through the product-document links on this page. The linked document identifies the part as a stereo codec for portable audio applications and contains the authoritative pin description, electrical characteristics, application circuit, and package drawings. Use the datasheet's pin-description table and recommended-layout figures when assigning PCB tracks.
Where can I find the WM8988LGECN/V pinout?
The WM8988LGECN/V pinout is defined by the pin-description table and package drawing in the manufacturer datasheet. The device has 28 terminals in a 4 mm by 4 mm QFN package. Use the manufacturer's numbering convention when assigning power, ground, clock, data, and analog audio nets; do not infer missing pin functions from a similarly named package.
What can replace the WM8988LGECN/V?
The closest documented same-family option is WM8988LGECN/RV, but its suffix represents a different orderable variant rather than a distinct drop-in family choice. The WM8988LGECN/V also shares the 28-QFN, 24-bit stereo codec format with related Cirrus Logic audio devices. A valid direct replacement must preserve the package, pin functions, supply rails, clock interface, and audio signal configuration.
Is WM8988LGECN/V a drop-in replacement for WM8988LGECN/RV?
The WM8988LGECN/V and WM8988LGECN/RV both identify a 28-QFN, 24-bit stereo audio codec, but the differing suffix codes must be checked against the manufacturer's ordering information before treating either as a direct substitution. The WM8988LGECN/RV listing identifies the same 28-QFN, 4 mm by 4 mm package. Verify lead finish, temperature grade, packing method, and any suffix-specific product status.
What is the best Cross-Brand equivalent for the WM8988LGECN/V?
No cross-brand drop-in equivalent can be confirmed from the available technical records for the WM8988LGECN/V. A valid replacement would need the same 28-QFN footprint, compatible 24-bit digital audio interface, equivalent clock and data connections, and matching analog input and output functions. Treat functionally similar codecs as redesign candidates until their pin descriptions and electrical characteristics have been checked line by line.
Is the WM8988LGECN/V suitable for portable audio applications?
Yes, the WM8988LGECN/V is specifically identified as a stereo codec for portable audio applications. Its low-power classification, 24-bit interface, CMOS construction, and compact 28-QFN package suit battery-powered equipment where board area is constrained. The manufacturer datasheet should be used to confirm supply-voltage combinations, clock requirements, and the current consumed by each enabled codec block.
When should I choose the WM8988LGECN/V instead of another stereo audio codec?
Choose the WM8988LGECN/V when the design specifically requires a 24-bit stereo codec in a 28-QFN, 4 mm by 4 mm package for portable equipment. It is particularly relevant when its documented clocking, supply, analog input, and analog output functions align with the existing system. If those requirements differ, compare a candidate against the complete pin and electrical tables rather than selecting solely by resolution.
Where can I buy the WM8988LGECN/V online?
Use the Request a Quote form on this page to request the WM8988LGECN/V, current commercial availability, and suitable order quantities. The form allows buyers to specify the required package variant and quantity without relying on a static price or stock statement. For exact production traceability, include the full suffix when sending the request.
What is the price of the WM8988LGECN/V?
The current commercial price for the WM8988LGECN/V is determined through the Request a Quote form on this page. Pricing can vary with order quantity, packaging, suffix, and supply status, so the form is the appropriate route for a current quote. The request should specify the quantity, target reel format, and whether the design requires full manufacturer traceability.
What is the lead time and stock status for the WM8988LGECN/V?
Current stock and lead-time information for the WM8988LGECN/V should be requested through the Request a Quote form on this page. Because supply can change with production scheduling, package demand, and the selected suffix, the quote response is more useful than a static availability statement. Include your required delivery date and production quantity with the request.
What are the key specifications of the WM8988LGECN/V that engineers should know?
The key documented specifications are a 24-bit stereo interface, 28-QFN packaging at 4 mm by 4 mm, low-power operation, synchronous CMOS operation, and a -25°C to +85°C temperature range. According to the manufacturer datasheet, the WM8988LGECN/V is intended for portable audio systems. Detailed supply rails, sampling rates, clock configurations, and analog performance remain the critical items to verify during design review.

Données de référence d'ingénierie pour WM8988LGECN/V — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the WM8988LGECN/V when the design requires a compact, low-power, 24-bit stereo codec in a 28-QFN, 4 mm by 4 mm package for portable audio equipment. Its documented synchronous CMOS operation, -25°C to +85°C range, and stereo audio focus make it appropriate for personal audio players, compact recording products, connected audio accessories, and small digital-audio interface modules. Before finalizing the choice, verify supply rails, supported sampling rates, clock modes, analog signal paths, and exposed-pad layout in the manufacturer datasheet. Do not substitute a generic codec solely because it offers the same bit depth. A true drop-in candidate must preserve all 28 package terminals, pin functions, clock requirements, and analog connections. If those conditions are not met, evaluate a functional alternative as a PCB redesign rather than a drop-in replacement.

Comparaison avec les alternatives

Paramètre Ce produit
Package 28-QFN, 4 mm x 4 mm
Brand Cirrus Logic
Product Type Stereo audio interface and low-power codec
Interface Resolution 24 bit
Audio Channels Stereo, 2 channels
Operating Temperature Range -25°C to +85°C
Operation Mode Synchronous
Process Technology CMOS
Power Class Low-power operation
Terminal Count 28 terminals
Target Application Portable audio equipment
RoHS Status Compliant

Principaux différenciateurs

  • Compact 24-bit stereo codec implementation (vs Larger 32-pin and leaded stereo codec packages)
  • Portable-audio-oriented low-power design (vs General-purpose higher-channel-count audio processors)
  • Defined commercial operating range (vs Unspecified-temperature catalog substitutes)

Notes de conception

Use the manufacturer’s QFN land pattern and exposed-pad recommendation rather than creating a footprint from terminal spacing alone. The WM8988LGECN/V is a 28-QFN device in a 4 mm by 4 mm package, so pad geometry, solder-mask clearance, and paste coverage materially affect assembly yield. Confirm the pin-1 orientation and exposed-pad connection from the package drawing, then verify the stencil aperture against the recommended assembly process before production release.

Separate the analog audio section from digital clock, data, and switching paths. Place input and output decoupling capacitors at the pins identified in the manufacturer application circuit, and keep the digital interface traces short and continuous. A solid ground reference is especially important because the codec combines digital control and clock signals with analog audio functions. Review return-current paths for nearby amplifiers, radio circuitry, and regulators to prevent codec output noise from coupling back into the analog inputs.

Do not select a replacement solely because both parts are called stereo audio codecs. Verify pin functions, supply rails, clocking, digital data format, analog input and output architecture, exposed-pad requirements, and operating-temperature limits. The WM8988LGECN/RV listing describes the same 28-QFN, 4 mm by 4 mm format, but suffix-specific ordering conditions must still be checked. A functionally similar codec with different pin assignments requires PCB changes and is not a drop-in replacement.

Plan the codec’s power states around the system’s audio-use model. The WM8988LGECN/V is described as a low-power stereo codec, but the actual supply current depends on enabled functions, clock activity, output loading, and supply voltage. Use the manufacturer’s power-consumption and shutdown information to estimate battery impact. Sequence regulators and clock sources to prevent unwanted startup transients, and include the codec supply in brownout and load-switch analysis rather than treating it as a negligible auxiliary load.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS compliance is identified in the product search listing. No manufacturer statement confirming REACH, lead-free status, halogen-free status, or conflict-mineral compliance was identified.

Recherches associées

WM8988LGECN/V datasheet WM8988LGECN/V pinout WM8988LGECN/V datasheet pdf WM8988LGECN/V equivalent WM8988LGECN/V replacement WM8988LGECN/V cross reference WM8988LGECN/V footprint WM8988LGECN/V price WM8988LGECN/V stock Cirrus Logic WM8988LGECN/V WM8988LGECN/V 28-QFN pinout WM8988LGECN/V portable audio codec WM8988LGECN/V 24-bit stereo interface WM8988LGECN/V schematic

Composants & termes associés

Cirrus Logic Wolfson Microelectronics WM8988LGECN/V WM8988LGECN/RV WM8985CGEFL/R Stereo audio codec Audio codec Audio interface IC Interface IC Integrated circuit Semiconductor 24-bit audio Synchronous operation CMOS 28-QFN QFN package family Surface mount SMD Low-power operation Portable audio equipment Digital audio interface Analog-to-digital conversion Digital-to-analog conversion RoHS
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ