XA6SLX75-3FGG484Q - 74,637-Cell Automotive FPGA | AMD
Артикул: XA6SLX75-3FGG484Q ✓ АктивенXA6SLX75-3FGG484Q Обзор
An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after manufacture. A field-programmable gate array belongs to the broader programmable-logic hierarchy, combining configurable logic blocks, programmable routing, memory resources, and parallel I/O in one device. The Spartan-6 LX XA family targets automotive applications where programmable logic, integration, and functional safety considerations are important.
The device provides 74,637 logic cells and 5,831 logic blocks according to the Microchip USA product listing. Its 280 I/O positions support interfaces to external processors, memory, sensors, communication transceivers, and automotive electronic control units. The device uses 45 nm CMOS technology and is identified as an AEC-Q100-qualified automotive FPGA. Additional operating and performance details should be confirmed in the manufacturer datasheet.
The -3 suffix identifies the device speed grade, while FGG484 identifies the lead-free 484-ball BGA package. This ordering code also carries the extended-temperature automotive qualification associated with the XA family. Because the device uses a large BGA package, PCB construction must account for via-in-pad or via-under-bump requirements, thermal management, assembly profile, and the exact ball map defined by the manufacturer package drawing.
Typical uses include automotive infotainment controllers, body and chassis control modules, sensor-fusion electronics, motor-control peripherals, communication gateways, and industrial systems requiring deterministic parallel I/O. The Spartan-6 architecture can consolidate protocol bridging, control logic, and interface functions into one programmable device while allowing firmware or bitstream updates across a product family.
Design planning should start with the manufacturer pinout, package drawing, supported I/O standards, clock requirements, and power-supply recommendations. Confirm differential-signal topology, bank voltage compatibility, decoupling, configuration-scheme requirements, and thermal conditions before layout release. For automotive production, validate the assembled device, inspection criteria, traceability, and change-control process.
This page combines exact catalog attributes, focused cross-reference options, application guidance, and design cautions to support a practical FPGA sourcing decision. It also distinguishes same-footprint replacement candidates from options that require careful qualification of speed grade, temperature grade, qualification status, and I/O behavior before use in an existing PCB design.
Аналоги без доработки для XA6SLX75-3FGG484Q — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XA6SLX75-3FGG484Q (тот же форм-фактор и посадочное место) — отличается по Speed Grade, Device Type, Mounting Type, Package, RoHS Status.
XA6SLX75-3FGG484I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XA6SLX75-2FGG484Q
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX75-3FGG484C
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX75-3FG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX75-2FGG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XA6SLX75-3FGG484Q Максимальные параметры и электрические характеристики
| Device Type | Spartan-6 LX XA field-programmable gate array |
| Logic Cells | 74,637 cells |
| Logic Blocks | 5,831 CLBs/LABs |
| User I/O | 280 I/O |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -3 |
| Корпус | 484-BBGA, 23 mm x 23 mm |
| Ball Pitch | 1 mm |
| Junction Temperature Range | -40°C to +125°C |
| Automotive Qualification | AEC-Q100 qualified |
| Статус RoHS | RoHS compliant |
| Lead-Free Status | Lead free |
| Packaging Type | Tray |
Руководство по цоколевке XA6SLX75-3FGG484Q в корпусе 484-bbga, 23 mm x 23 mm
Цоколевка для XA6SLX75-3FGG484Q (корпус 484-bbga, 23 mm x 23 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XA6SLX75-3FGG484Q.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XA6SLX75-3FGG484Q подходит для 6 применениеs: Automotive Body Control Module, Automotive Sensor Fusion Controller, Vehicle Communication Gateway, Motor and Powertrain Control Peripherals, Industrial Data Acquisition System, Video and Display Processing.
Automotive Body Control Module
The XA6SLX75-3FGG484Q fits body-control applications that require extensive parallel I/O and programmable automotive-grade logic. Its 74,637 logic cells and 280 I/O positions can consolidate switch inputs, lamp controls, relay logic, sensor conditioning, and communication isolation around one FPGA. The -3 speed grade supports the target specified by the design, while the AEC-Q100 qualification listed for the XA family provides a foundation for automotive production programs. Engineers should use the manufacturer I/O tables to assign 1.2 V core connections and bank-compatible external interfaces. Placement near the regulated supply network, complete decoupling, and a thermal path through the 484-BBGA package are essential for reliable operation from -40°C to +125°C junction-temperature conditions.
Рекомендуется
Automotive Sensor Fusion Controller
The XA6SLX75-3FGG484Q can combine sensor timing, filtering, calibration, and interface control in a centralized automotive electronics module. The 280 available I/O positions are valuable when connecting accelerometers, pressure sensors, inertial-measurement devices, and redundant communication links to one programmable device. Its 45 nm CMOS Spartan-6 LX implementation provides 74,637 logic cells for parallel datapaths and control functions, while the -3 grade addresses the target speed selected for the design. Because sensor accuracy can be affected by power noise and clock quality, the implementation should isolate analog interfaces, use controlled clock distribution, and apply the manufacturer’s recommended decoupling. Automotive validation must also confirm the XA qualification and the -40°C to +125°C operating assumptions for the complete module.
Рекомендуется
Vehicle Communication Gateway
The XA6SLX75-3FGG484Q is suitable for a vehicle communication gateway that must bridge multiple digital interfaces while maintaining deterministic programmable behavior. Its 280 I/O positions and 74,637 logic cells can support protocol conversion, message filtering, routing, diagnostics, and host-interface control. The 1.2 V core operation and 45 nm CMOS implementation make it appropriate for compact multirail electronic control units, but every external interface must remain compatible with its assigned I/O bank voltage. The -3 speed grade provides a defined performance class for timing-critical gateway functions. Layout should minimize sensitive routing over split power planes, provide low-impedance ground distribution, and reserve the manufacturer-prescribed configuration pins. Qualification status and traceability should be confirmed during automotive sourcing so the exact XA device is used throughout production.
Рекомендуется
Motor and Powertrain Control Peripherals
The XA6SLX75-3FGG484Q can implement control, monitoring, and fault-handling peripherals around a powertrain controller without moving every fixed function into a hardwired logic device. Programmable logic supports timing sequencing, sensor validation, redundant signal checks, actuator-command arbitration, and diagnostic reporting. The device’s 280 I/O positions allow numerous discrete sensors and control signals to be consolidated, while its 74,637 logic cells provide capacity for parallel control paths. The automotive XA identity and stated AEC-Q100 qualification are relevant for harsh operating environments, but system safety depends on the complete architecture rather than one component. Designers must preserve isolation between safety domains, validate timing against the -3 grade limits, and follow the manufacturer’s power, thermal, and pin-assignment requirements for the 484-BBGA package.
Рекомендуется
Industrial Data Acquisition System
The XA6SLX75-3FGG484Q can serve as the central acquisition and processing element in an industrial data-acquisition system requiring many deterministic digital inputs. Its 280 I/O positions are suitable for parallel sensor collection, machine-interface signaling, counter inputs, and control outputs, while the 74,637-cell architecture provides room for acquisition pipelines and protocol logic. The -3 speed grade is useful when the design must satisfy a defined timing class, and the 1.2 V core supply simplifies partitioning around modern industrial controllers. Industrial users should still complete their own environmental and lifecycle assessment. The PCB must account for the 23 mm by 23 mm 484-BBGA footprint, 1 mm ball pitch, assembly process, thermal management, and clean supply distribution. Configuration storage and update mechanisms must also be designed around the manufacturer’s supported schemes.
Рекомендуется
Video and Display Processing
The XA6SLX75-3FGG484Q can implement parallel video timing, pixel processing, synchronization, and interface bridging in automotive or industrial display systems. Its 280 I/O positions offer substantial connectivity for raster interfaces and control signals, while 74,637 logic cells allow timing generators, overlay logic, and data-path processing to be consolidated. The -3 speed grade supports designs whose timing closure requires that performance class. Signal integrity remains a board-level constraint because the device uses a 1 mm-pitch 484-BBGA package and a nominal 1.2 V core supply. Route high-speed display interfaces with controlled impedance and adequate return paths, keep switching noise away from sensitive references, and use the manufacturer’s recommended I/O and clocking guidance. For automotive displays, confirm the exact XA qualification and production-temperature requirements before release.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XA6SLX75-3FGG484Q — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XA6SLX75-3FGG484I | XA6SLX75-2FGG484Q | XC6SLX75-3FGG484C | XC6SLX75-3FG484I | XC6SLX75-2FGG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | Xilinx | Xilinx | Xilinx |
| Package | 484-BBGA | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same |
| FPGA Family | Spartan-6 LX XA | Spartan-6 LX XA | Spartan-6 LX XA | Spartan-6 LX XC | Spartan-6 LX XC | Spartan-6 LX XC |
| Logic Cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells |
| Speed Grade | -3 | -3 | -2 | -3 | -3 | -2 |
Ключевые отличия
- Retains the -3 speed designation (против XA6SLX75-2FGG484Q)
- Matches the target logic-cell capacity (против XC6SLX75-2FGG484I)
- Automotive XA family identity (против XC6SLX75-3FGG484C)
- Closest same-package ordering candidate (против XA6SLX75-3FGG484I)
Заметки по проектированию
Design the XA6SLX75-3FGG484Q around its nominal 1.2 V core supply and apply the manufacturer’s recommended decoupling and power-sequencing requirements. Keep the 1.14 V to 1.26 V operating range visible during schematic review, and account for separate I/O-bank supplies where required. Place supply and ground connections according to the exact manufacturer ball map, use low-impedance distribution, and verify that the selected regulator and termination network remain stable with the FPGA’s transient current.
The 484-BBGA uses a 23 mm by 23 mm body and 1 mm ball pitch, so assembly and routing require the exact manufacturer land pattern. Confirm whether the assembly process requires via-in-pad or via-under-bump structures, and define the solder-mask and paste features from the package drawing. Avoid improvised escape-routing because mismatched ball assignments can damage program logic, I/O banks, clock inputs, or dedicated configuration pins.
Provide a continuous thermal path from the 484-BBGA to the board’s copper and enclosure structure. The device is associated with a -40°C to +125°C junction-temperature range, so heat generated by a -3 grade design must be evaluated across the full automotive temperature profile. Use the manufacturer’s thermal model and maximum power conditions rather than assuming ambient temperature equals junction temperature, and include temperature sensors or conservative design margins where mission profiles are demanding.
Do not approve a cross-reference solely from the 484-BBGA package name. Compare speed grade, temperature grade, automotive qualification, user-I/O allocation, configuration scheme, and device status before substitution. In particular, XA6SLX75-3FGG484I and the XC6SLX75-3FGG484C/-3FG484I candidates preserve major catalog attributes but differ in family or suffix identity. Obtain authoritative device documentation and complete engineering change control for every approved substitution.
Информация о соответствии
The device listing identifies RoHS compliance, lead-free construction, and AEC-Q100 qualification. REACH, halogen-free status, and conflict-minerals status were not explicitly established.