AMD

XA6SLX75-3FGG484Q - 74,637-Cell Automotive FPGA | AMD

MPN: XA6SLX75-3FGG484Q ✓ Nakahanda
1.2 V Vdss 484-BBGA, 23 mm x 23 mm Package -3 Speed
MOQ: 1 |

XA6SLX75-3FGG484Q Ulas

The AMD XA6SLX75-3FGG484Q is an automotive Spartan-6 LX XA field-programmable gate array with 74,637 logic cells, 280 I/O, and a 1.2 V core supply in a 484-BBGA package. The -3 speed grade supports designs operating up to the manufacturer-defined performance target for this device family, while the XA prefix identifies its automotive-oriented product positioning.

An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after manufacture. A field-programmable gate array belongs to the broader programmable-logic hierarchy, combining configurable logic blocks, programmable routing, memory resources, and parallel I/O in one device. The Spartan-6 LX XA family targets automotive applications where programmable logic, integration, and functional safety considerations are important.

The device provides 74,637 logic cells and 5,831 logic blocks according to the Microchip USA product listing. Its 280 I/O positions support interfaces to external processors, memory, sensors, communication transceivers, and automotive electronic control units. The device uses 45 nm CMOS technology and is identified as an AEC-Q100-qualified automotive FPGA. Additional operating and performance details should be confirmed in the manufacturer datasheet.

The -3 suffix identifies the device speed grade, while FGG484 identifies the lead-free 484-ball BGA package. This ordering code also carries the extended-temperature automotive qualification associated with the XA family. Because the device uses a large BGA package, PCB construction must account for via-in-pad or via-under-bump requirements, thermal management, assembly profile, and the exact ball map defined by the manufacturer package drawing.

Typical uses include automotive infotainment controllers, body and chassis control modules, sensor-fusion electronics, motor-control peripherals, communication gateways, and industrial systems requiring deterministic parallel I/O. The Spartan-6 architecture can consolidate protocol bridging, control logic, and interface functions into one programmable device while allowing firmware or bitstream updates across a product family.

Design planning should start with the manufacturer pinout, package drawing, supported I/O standards, clock requirements, and power-supply recommendations. Confirm differential-signal topology, bank voltage compatibility, decoupling, configuration-scheme requirements, and thermal conditions before layout release. For automotive production, validate the assembled device, inspection criteria, traceability, and change-control process.

This page combines exact catalog attributes, focused cross-reference options, application guidance, and design cautions to support a practical FPGA sourcing decision. It also distinguishes same-footprint replacement candidates from options that require careful qualification of speed grade, temperature grade, qualification status, and I/O behavior before use in an existing PCB design.

Mga alternatibo na pwedeng ilagay na XA6SLX75-3FGG484Q — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok XA6SLX75-3FGG484Q (parehas na form factor at footprint) — pagkakaiba sa Speed Grade, Device Type, Mounting Type, Package, RoHS Status.

AMD
Speed Grade: -2 (mid-range)
Mounting Type: Surface Mount (BGA)
Package: 484-ball FBGA (FGG484), 23 x 23 mm, 1.0 mm pitch
Ikabit sa XA6SLX75-3FGG484Q →
AMD
Speed Grade: -3 highest-performance family grade
Device Type: FPGA
Mounting Type: Surface mount
Ikabit sa XA6SLX75-3FGG484Q →
AMD
Speed Grade: -3 (highest performance in Spartan-6 LX family)
Device Type: Field Programmable Gate Array (FPGA)
Mounting Type: Surface Mount (SMD)
Ikabit sa XA6SLX75-3FGG484Q →

XA6SLX75-3FGG484I

✅ Drop-In
📦 484-BBGA
Same XA family, -3 speed grade, 74,637 cells, and 484-BBGA format; I suffix changes the ordering or qualification variant

📋 Alternatibo na Reference (hindi sa katalogo)

XA6SLX75-2FGG484Q

✅ Drop-In
AMD
📦 484-BBGA
Spartan-6 LX XA · 74,637 cells · 5,831 CLBs · 667 MHz · 0.26 ns · 280 I/O · 45 nm CMOS · 1.2 V

Magkontak para sa presyo

Tingnan ang Datasheet →

XC6SLX75-3FGG484C

✅ Drop-In
AMD
📦 484-BBGA
Field Programmable Gate Array (FPGA) · Spartan-6 LX · 74,637 · 280 · 484-ball FBGA (MS-034) · 23 x 23 mm · 1.0 mm · 667 MHz

Magkontak para sa presyo

Tingnan ang Datasheet →

XC6SLX75-3FG484I

✅ Drop-In
AMD
📦 484-BBGA
FPGA · Spartan-6 LX · 74,637 cells · 5,831 CLBs · 45 nm CMOS · 1.2 V · 280 I/O · 667 MHz

Magkontak para sa presyo

Tingnan ang Datasheet →

XC6SLX75-2FGG484I

✅ Drop-In
AMD
📦 484-BBGA
Spartan-6 LX · 74,637 · 11,650 slices · 3,170,304 · 4,824 Kbits (180 x 18 Kbit) · 132 · 280 · 667 MHz

Magkontak para sa presyo

Tingnan ang Datasheet →

XA6SLX75-3FGG484Q Mga Pinakamataas na Rating at Electrical Characteristics

Device Type Spartan-6 LX XA field-programmable gate array
Logic Cells 74,637 cells
Logic Blocks 5,831 CLBs/LABs
User I/O 280 I/O
Process Technology 45 nm CMOS
Core Supply Voltage 1.2 V
Supply Voltage Range 1.14 V to 1.26 V
Speed Grade -3
Packhaging 484-BBGA, 23 mm x 23 mm
Ball Pitch 1 mm
Junction Temperature Range -40°C to +125°C
Automotive Qualification AEC-Q100 qualified
Tindminan RoHS RoHS compliant
Lead-Free Status Lead free
Packaging Type Tray

Gabay sa Pin Configuration ng XA6SLX75-3FGG484Q 484-bbga, 23 mm x 23 mm

Pin configuration para sa XA6SLX75-3FGG484Q (484-bbga, 23 mm x 23 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 484-bbga, 23 mm x 23 mm package para sa XA6SLX75-3FGG484Q

Wala ng detalyadong pinout data na magagamit para sa XA6SLX75-3FGG484Q.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

XA6SLX75-3FGG484Q ay nararapat para sa 6 aplikasyons: Automotive Body Control Module, Automotive Sensor Fusion Controller, Vehicle Communication Gateway, Motor and Powertrain Control Peripherals, Industrial Data Acquisition System, Video and Display Processing.

🚗

Automotive Body Control Module

The XA6SLX75-3FGG484Q fits body-control applications that require extensive parallel I/O and programmable automotive-grade logic. Its 74,637 logic cells and 280 I/O positions can consolidate switch inputs, lamp controls, relay logic, sensor conditioning, and communication isolation around one FPGA. The -3 speed grade supports the target specified by the design, while the AEC-Q100 qualification listed for the XA family provides a foundation for automotive production programs. Engineers should use the manufacturer I/O tables to assign 1.2 V core connections and bank-compatible external interfaces. Placement near the regulated supply network, complete decoupling, and a thermal path through the 484-BBGA package are essential for reliable operation from -40°C to +125°C junction-temperature conditions.

🧩

Automotive Sensor Fusion Controller

The XA6SLX75-3FGG484Q can combine sensor timing, filtering, calibration, and interface control in a centralized automotive electronics module. The 280 available I/O positions are valuable when connecting accelerometers, pressure sensors, inertial-measurement devices, and redundant communication links to one programmable device. Its 45 nm CMOS Spartan-6 LX implementation provides 74,637 logic cells for parallel datapaths and control functions, while the -3 grade addresses the target speed selected for the design. Because sensor accuracy can be affected by power noise and clock quality, the implementation should isolate analog interfaces, use controlled clock distribution, and apply the manufacturer’s recommended decoupling. Automotive validation must also confirm the XA qualification and the -40°C to +125°C operating assumptions for the complete module.

🌐

Vehicle Communication Gateway

The XA6SLX75-3FGG484Q is suitable for a vehicle communication gateway that must bridge multiple digital interfaces while maintaining deterministic programmable behavior. Its 280 I/O positions and 74,637 logic cells can support protocol conversion, message filtering, routing, diagnostics, and host-interface control. The 1.2 V core operation and 45 nm CMOS implementation make it appropriate for compact multirail electronic control units, but every external interface must remain compatible with its assigned I/O bank voltage. The -3 speed grade provides a defined performance class for timing-critical gateway functions. Layout should minimize sensitive routing over split power planes, provide low-impedance ground distribution, and reserve the manufacturer-prescribed configuration pins. Qualification status and traceability should be confirmed during automotive sourcing so the exact XA device is used throughout production.

⚡

Motor and Powertrain Control Peripherals

The XA6SLX75-3FGG484Q can implement control, monitoring, and fault-handling peripherals around a powertrain controller without moving every fixed function into a hardwired logic device. Programmable logic supports timing sequencing, sensor validation, redundant signal checks, actuator-command arbitration, and diagnostic reporting. The device’s 280 I/O positions allow numerous discrete sensors and control signals to be consolidated, while its 74,637 logic cells provide capacity for parallel control paths. The automotive XA identity and stated AEC-Q100 qualification are relevant for harsh operating environments, but system safety depends on the complete architecture rather than one component. Designers must preserve isolation between safety domains, validate timing against the -3 grade limits, and follow the manufacturer’s power, thermal, and pin-assignment requirements for the 484-BBGA package.

🏭

Industrial Data Acquisition System

The XA6SLX75-3FGG484Q can serve as the central acquisition and processing element in an industrial data-acquisition system requiring many deterministic digital inputs. Its 280 I/O positions are suitable for parallel sensor collection, machine-interface signaling, counter inputs, and control outputs, while the 74,637-cell architecture provides room for acquisition pipelines and protocol logic. The -3 speed grade is useful when the design must satisfy a defined timing class, and the 1.2 V core supply simplifies partitioning around modern industrial controllers. Industrial users should still complete their own environmental and lifecycle assessment. The PCB must account for the 23 mm by 23 mm 484-BBGA footprint, 1 mm ball pitch, assembly process, thermal management, and clean supply distribution. Configuration storage and update mechanisms must also be designed around the manufacturer’s supported schemes.

📺

Video and Display Processing

The XA6SLX75-3FGG484Q can implement parallel video timing, pixel processing, synchronization, and interface bridging in automotive or industrial display systems. Its 280 I/O positions offer substantial connectivity for raster interfaces and control signals, while 74,637 logic cells allow timing generators, overlay logic, and data-path processing to be consolidated. The -3 speed grade supports designs whose timing closure requires that performance class. Signal integrity remains a board-level constraint because the device uses a 1 mm-pitch 484-BBGA package and a nominal 1.2 V core supply. Route high-speed display interfaces with controlled impedance and adequate return paths, keep switching noise away from sensitive references, and use the manufacturer’s recommended I/O and clocking guidance. For automotive displays, confirm the exact XA qualification and production-temperature requirements before release.

What are the key specifications of XA6SLX75-3FGG484Q?
The XA6SLX75-3FGG484Q is a 74,637-cell Spartan-6 LX XA FPGA with 280 I/O, a 1.2 V core supply, and a 484-BBGA package. According to the manufacturer datasheet and the AMD product listing, it uses 45 nm CMOS technology and is AEC-Q100 qualified for automotive applications. The device is identified with the -3 speed grade, while GGG484 describes its lead-free 484-ball package.
What is the operating voltage of XA6SLX75-3FGG484Q?
The XA6SLX75-3FGG484Q operates from a nominal 1.2 V core supply, with a listed voltage range of 1.14 V to 1.26 V. According to the manufacturer datasheet, the exact voltage tolerances apply to the specified I/O and configuration conditions. Engineers should also use the device-specific recommended operating conditions for bank supplies rather than assuming that every I/O rail can tolerate the same voltage.
Where can I download the XA6SLX75-3FGG484Q datasheet PDF?
The XA6SLX75-3FGG484Q datasheet PDF can be obtained through the linked manufacturer-hosted document or a product documentation page such as FindIC. According to the manufacturer datasheet, it contains the definitive device identification, electrical characteristics, package information, and qualification details. Use the document for the final schematic and layout because distributor listings may omit revision-specific conditions and detailed timing tables.
Where can I find the XA6SLX75-3FGG484Q pinout and package drawing?
The XA6SLX75-3FGG484Q pinout is defined by the manufacturer package drawing for the 484-BBGA package, a 23 mm by 23 mm device with 1 mm ball pitch. According to the manufacturer datasheet and package documentation, the BGA ball map includes the supply, ground, configuration, clock, and user-I/O assignments. A generic package illustration must not be used to assign PCB nets because ball and bank functions are device-specific.
Is XA6SLX75-3FGG484Q suitable for automotive applications?
Yes, the XA6SLX75-3FGG484Q is suitable for automotive applications requiring an AEC-Q100-qualified FPGA. According to the Microchip USA product listing, it is an automotive Spartan-6 LX XA device with 74,637 logic cells, 5,831 CLBs, and a junction-temperature range of -40°C to +125°C. Qualification does not by itself qualify the complete vehicle system; production validation remains necessary.
What can replace XA6SLX75-3FGG484Q on the same PCB?
The closest same-footprint candidates include XA6SLX75-3FGG484I, XA6SLX75-2FGG484Q, XC6SLX75-3FGG484C, XC6SLX75-3FG484I, and XC6SLX75-2FGG484I. Each candidate uses a 484-BBGA format, but speed grade, temperature grade, qualification, or ordering suffix may differ. According to the cross-reference listings, pin compatibility should be followed by a detailed review of device identification and qualification requirements.
What is the difference between XA6SLX75-3FGG484Q and XC6SLX75-3FGG484C?
Both devices are listed as 74,637-cell, 45 nm Spartan-6-family devices in 484-BBGA packages, but their suffix codes identify different qualification and ordering variants. According to the AMD product listing, XA6SLX75-3FGG484Q is an AEC-Q100-qualified automotive XA device, whereas XC6SLX75-3FGG484C belongs to the commercial XC ordering family. A substitution requires formal change control and validation.
When should I choose XA6SLX75-3FGG484Q over XC6SLX75-3FGG484C?
Choose XA6SLX75-3FGG484Q when the design requires the automotive XA qualification and ordering identity rather than the commercial XC family. According to the Microchip USA product listing, the XA device is AEC-Q100 qualified and carries a -3 speed grade. XC6SLX75-3FGG484C may be appropriate for non-automotive designs only after its electrical limits, qualification status, lifecycle plan, and production requirements are confirmed.
Is XA6SLX75-3FGG484Q the same as XC6SLX75-2FGG484I?
No. The XA6SLX75-3FGG484Q and XC6SLX75-2FGG484I share a 484-BBGA format and the same Spartan-6 LX logic-cell class, but they have different family codes and speed grades. According to the cross-reference data, the target carries a -3 speed designation while the alternative carries -2. Treat the candidate as a conditional drop-in pending timing, qualification, and lifecycle review.
What is the best AMD equivalent for XA6SLX75-3FGG484Q?
XA6SLX75-3FGG484I is the closest same-package AMD candidate identified by the cross-reference data because it retains the XA family, -3 speed grade, 484-BBGA format, and 74,637-cell configuration. According to the comparison listing, the differing I suffix identifies a distinct ordering or qualification variant. Verify its temperature grade, automotive qualification status, and exact ball compatibility before approving it.
Does XA6SLX75-3FGG484Q support a 484-BBGA package?
Yes, the XA6SLX75-3FGG484Q is supplied in a 484-BBGA package measuring 23 mm by 23 mm with 1 mm ball pitch. According to the FindIC device specification, the FGG484 ordering code corresponds to this package. The PCB must follow the exact manufacturer ball map, escape-routing rules, solder-mask and paste requirements, and recommended thermal design.
How much I/O does XA6SLX75-3FGG484Q provide?
The XA6SLX75-3FGG484Q provides 280 user I/O positions. According to the AMD product listing, this large parallel I/O count supports connections to sensors, external memories, processors, transceivers, and automotive electronic control units. The usable number and voltage range of each I/O depend on the selected bank configuration, so engineers must consult the manufacturer I/O tables before assigning pins.
What power and thermal considerations apply to XA6SLX75-3FGG484Q?
The XA6SLX75-3FGG484Q requires a nominal 1.2 V core supply and careful distribution across its 484-ball package. According to the manufacturer datasheet, recommended decoupling, power sequencing, and maximum junction-temperature conditions must be followed. A large BGA also requires controlled layout and adequate thermal paths, especially when automotive ambient and enclosure conditions limit heat dissipation.
Is XA6SLX75-3FGG484Q in stock and what is its lead time?
Current inventory and lead time should be obtained through the Request a Quote form on this page. According to the current product listings, the part is actively offered, but listing text alone does not establish a guaranteed stock quantity or delivery schedule. The quote request should state the required quantity, package format, date code, traceability needs, and target delivery location.
How much does XA6SLX75-3FGG484Q cost?
The current commercial price for XA6SLX75-3FGG484Q should be requested through the Request a Quote form on this page. According to the manufacturer product information, pricing can depend on volume, acquisition channel, date code, packaging, and production requirements. Submit the required quantity and supply specifications so the quote reflects the exact 484-BBGA device rather than a related Spartan-6 variant.
Which tools and programming interfaces support XA6SLX75-3FGG484Q?
The XA6SLX75-3FGG484Q is supported by the Spartan-6 design and programming tool chain identified in the manufacturer documentation. According to the manufacturer datasheet, the precise configuration interface and supported cable or embedded-programming methods depend on the board design and device configuration scheme. Use the device-specific bitstream-generation and configuration guidance rather than assuming compatibility from a related Spartan-6 part.

Impormasyon ng Talumpati sa Engineering for XA6SLX75-3FGG484Q — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose XA6SLX75-3FGG484Q when an automotive production design specifically requires the XA Spartan-6 LX identity, the -3 speed grade, and the listed AEC-Q100 qualification. XA6SLX75-3FGG484I is the closest same-package alternative identified by the cross-reference data, but its suffix-specific qualification and ordering details must be confirmed. Use XA6SLX75-2FGG484Q only when the -2 timing class meets the design margin. XC6SLX75-3FGG484C and XC6SLX75-3FG484I preserve the 74,637-cell and 484-BBGA configuration, but they do not preserve the target's automotive XA identity. XC6SLX75-2FGG484I changes both the family code and speed grade. Because package equality alone does not establish production equivalence, every alternative requires review of timing, temperature, qualification, lifecycle, and configuration requirements.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto XA6SLX75-3FGG484I XA6SLX75-2FGG484Q XC6SLX75-3FGG484C XC6SLX75-3FG484I XC6SLX75-2FGG484I
Brand AMD AMD AMD Xilinx Xilinx Xilinx
Package 484-BBGA 484-BBGA - same 484-BBGA - same 484-BBGA - same 484-BBGA - same 484-BBGA - same
FPGA Family Spartan-6 LX XA Spartan-6 LX XA Spartan-6 LX XA Spartan-6 LX XC Spartan-6 LX XC Spartan-6 LX XC
Logic Cells 74,637 cells 74,637 cells 74,637 cells 74,637 cells 74,637 cells 74,637 cells
Speed Grade -3 -3 -2 -3 -3 -2

Pangunahing mga Pagkakaiba

  • Retains the -3 speed designation (kumpara saXA6SLX75-2FGG484Q)
  • Matches the target logic-cell capacity (kumpara saXC6SLX75-2FGG484I)
  • Automotive XA family identity (kumpara saXC6SLX75-3FGG484C)
  • Closest same-package ordering candidate (kumpara saXA6SLX75-3FGG484I)

Talaan ng Disenyo

Design the XA6SLX75-3FGG484Q around its nominal 1.2 V core supply and apply the manufacturer’s recommended decoupling and power-sequencing requirements. Keep the 1.14 V to 1.26 V operating range visible during schematic review, and account for separate I/O-bank supplies where required. Place supply and ground connections according to the exact manufacturer ball map, use low-impedance distribution, and verify that the selected regulator and termination network remain stable with the FPGA’s transient current.

The 484-BBGA uses a 23 mm by 23 mm body and 1 mm ball pitch, so assembly and routing require the exact manufacturer land pattern. Confirm whether the assembly process requires via-in-pad or via-under-bump structures, and define the solder-mask and paste features from the package drawing. Avoid improvised escape-routing because mismatched ball assignments can damage program logic, I/O banks, clock inputs, or dedicated configuration pins.

Provide a continuous thermal path from the 484-BBGA to the board’s copper and enclosure structure. The device is associated with a -40°C to +125°C junction-temperature range, so heat generated by a -3 grade design must be evaluated across the full automotive temperature profile. Use the manufacturer’s thermal model and maximum power conditions rather than assuming ambient temperature equals junction temperature, and include temperature sensors or conservative design margins where mission profiles are demanding.

Do not approve a cross-reference solely from the 484-BBGA package name. Compare speed grade, temperature grade, automotive qualification, user-I/O allocation, configuration scheme, and device status before substitution. In particular, XA6SLX75-3FGG484I and the XC6SLX75-3FGG484C/-3FG484I candidates preserve major catalog attributes but differ in family or suffix identity. Obtain authoritative device documentation and complete engineering change control for every approved substitution.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
Walang Lead
Yes
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The device listing identifies RoHS compliance, lead-free construction, and AEC-Q100 qualification. REACH, halogen-free status, and conflict-minerals status were not explicitly established.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

XA6SLX75-3FGG484Q datasheet XA6SLX75-3FGG484Q specifications XA6SLX75-3FGG484Q pinout XA6SLX75-3FGG484Q datasheet pdf AMD XA6SLX75-3FGG484Q XA6SLX75-3FGG484Q equivalent XA6SLX75-3FGG484Q replacement XA6SLX75-3FGG484Q cross reference XA6SLX75-3FGG484Q vs XC6SLX75-3FGG484C XA6SLX75-3FGG484Q 484 BBGA XA6SLX75-3FGG484Q automotive FPGA XA6SLX75-3FGG484Q price XA6SLX75-3FGG484Q stock

Mga kaugnay na Mga Komponente at mga Tuntunin

AMD Xilinx XA6SLX75-3FGG484Q XA6SLX75-3FGG484I XA6SLX75-2FGG484Q XC6SLX75-3FGG484C XC6SLX75-3FG484I XC6SLX75-2FGG484I Spartan-6 LX XA field-programmable gate array FPGA programmable logic logic cell configurable logic block 484-BBGA BGA package family 45 nm CMOS 1.2 V core supply 280 I/O AEC-Q100 RoHS automotive electronics vehicle communication gateway sensor fusion
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ