XC4VLX60-10FFG668I - Virtex-4 LX FPGA | AMD | 668-BBGA
Артикул: XC4VLX60-10FFG668I ✗ Снят с производстваXC4VLX60-10FFG668I Обзор
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after fabrication. Unlike a fixed-function application-specific integrated circuit, an FPGA supports field-updatable logic and accommodates evolving interfaces or algorithms without requiring a new ASIC fabrication run. Within the Virtex product hierarchy, the XC4VLX60 belongs to the LX family, combining large programmable logic capacity with high-speed serial connectivity and substantial block-RAM resources.
The device provides 59,904 logic cells organized into 26,624 adaptive logic modules, along with 2.81 Mbit of embedded memory according to the published comparison data. Its 448 I/O and 668-ball package expose a high pin count for parallel buses, while dedicated high-speed serial transceivers support differential links. The -10 speed grade supports a logical design position within the Virtex-4 -12, -11, and -10 performance hierarchy.
The Virtex-4 architecture is implemented in 90 nm CMOS and combines configurable logic blocks with dedicated arithmetic, memory, clocking, and high-speed serial resources. Its 1.2 V core supply reduces core-rail power relative to earlier generations, although external I/O standards can require separate supply rails and careful interface design. Multiplier and block-RAM resources allow designers to partition datapaths between programmable logic, dedicated hardware, and memory rather than implementing every operation in general-purpose fabric.
Typical uses include industrial networking, telecommunications equipment, high-speed data acquisition, broadcast infrastructure, scientific instrumentation, and embedded processing platforms. The device can implement parallel-to-serial conversion, data-format conversion, packet processing, signal conditioning, and control functions in one package. It is particularly useful when design flexibility and deterministic hardware parallelism are more important than the unit cost and power efficiency of a smaller FPGA or ASIC.
Board design requires careful attention to the 668-ball BGA layout, multiple supply rails, decoupling, clock integrity, and high-speed serial routing. Use the AMD Virtex-4 package pinout files to assign every ball correctly, and follow the device power and decoupling guidance before finalizing layer stack-up. Configuration programming, startup behavior, JTAG access, and thermal management must also be validated for the complete system.
This product page combines the published device characteristics with same-family drop-in considerations, application guidance, package constraints, and selection trade-offs. It is intended to help engineers evaluate whether the XC4VLX60-10FFG668I provides the required Virtex-4 LX capacity and I/O density without overlooking legacy-tool, thermal, or board-layout restrictions.
Аналоги без доработки для XC4VLX60-10FFG668I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC4VLX60-10FFG668I (тот же форм-фактор и посадочное место) — отличается по Device Type, Logic Cells, Mounting Type, Core Supply Voltage, Internal Frequency.
XC4VLX60-10FFG668C
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC4VLX60-11FFG668C
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC4VLX60-12FFG668C
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC4VLX60-11FFG668I
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC4VLX60-12FFG668I
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC4VLX60-10FF668I
✅ Прямая заменаУточнить цену
Открыть даташит →XC4VLX60-10FFG668I Максимальные параметры и электрические характеристики
| Device Type | Virtex-4 LX field-programmable gate array (FPGA) |
| Logic Cells | 59,904 cells |
| Adaptive Logic Modules | 26,624 ALMs |
| Embedded Memory | 2.81 Mbit |
| User I/O | 448 I/O |
| Package Pins | 668 pins |
| Package Type | 668-ball FCBGA |
| Logic Family | CMOS |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Performance Grade | -10 speed grade |
| Рабочая температура | 0°C to 85°C |
| Internal Frequency | 1,028 MHz |
| Тип монтажа | Surface-mount FCBGA |
| Pb-Free Status | Pb-free |
Руководство по цоколевке XC4VLX60-10FFG668I в корпусе 668-ball fcbga
Цоколевка для XC4VLX60-10FFG668I (корпус 668-ball fcbga). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC4VLX60-10FFG668I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC4VLX60-10FFG668I подходит для 6 применениеs: Industrial Networking and Protocol Conversion, Telecommunications Data-Path Processing, High-Speed Data Acquisition, Broadcast and Digital Video Infrastructure, Scientific and Test Instrumentation, Embedded Control and Hardware Acceleration.
Industrial Networking and Protocol Conversion
The AMD XC4VLX60-10FFG668I fits industrial gateways and protocol-conversion equipment requiring substantial parallel connectivity alongside configurable high-speed logic. Its 448 I/O can support wide data buses and control interfaces, while 59,904 logic cells allow packet classification, buffering, and format translation to be implemented in parallel. The -10 speed grade provides a defined timing class, and the industrial 0°C to 85°C range suits controlled industrial enclosures. Place serial channels away from sensitive parallel interfaces, use controlled-impedance routing, and reserve enough FPGA fabric for clock-domain crossing and system-level diagnostics.
Telecommunications Data-Path Processing
XC4VLX60-10FFG668I is appropriate for telecommunications equipment that must combine traffic classification, aggregation, line-rate interface adaptation, and supervisory logic. The large Virtex-4 LX fabric supports parallel pipeline architectures, while the dedicated serial capabilities can reduce external transceiver overhead for suitable links. Its 448 I/O provide ample control and status bandwidth, and 2.81 Mbit of embedded memory supports buffering and packet-state storage. Engineers should budget additional logic for clock recovery, lane alignment, error handling, and standards-specific framing rather than allocating the entire fabric to payload processing.
High-Speed Data Acquisition
The AMD XC4VLX60-10FFG668I can serve as the central processing device in instrumentation that captures, filters, and routes high-volume parallel data. Its 59,904 logic cells accommodate acquisition pipelines, trigger logic, digital filtering, and test-sequence control, while 448 I/O provide broad connectivity to converters, memory, and backplanes. The 1.2 V core supply supports efficient logic operation, but accurate timing closure remains critical because acquisition paths often combine wide buses with external clocking. Constrain input and output timing, use dedicated clock resources, and keep sensitive analog and digital grounds separated.
Broadcast and Digital Video Infrastructure
XC4VLX60-10FFG668I is suitable for broadcast routing, video processing, and digital content-transport systems requiring flexible parallel and serial interfaces. Programmable logic can perform pixel-format conversion, synchronization, ancillary-data handling, and interface bridging, while the Virtex-4 serial resources support compatible high-speed links. The large I/O count simplifies connections among receivers, routers, memory, and control processors. For video designs, establish deterministic clock domains and validate recovery behavior, synchronization intervals, and auxiliary-data latency against the target video standard before hardware release.
Scientific and Test Instrumentation
The AMD XC4VLX60-10FFG668I fits modular scientific instruments that combine sensor conditioning, calibration tables, acquisition control, and real-time processing in one programmable device. Its 59,904 logic cells allow parallel filtering and measurement pipelines, and 2.81 Mbit of embedded memory can support calibration data, trace buffers, or intermediate results. The 668-ball FCBGA package offers extensive connectivity but demands careful escape routing and thermal planning. Separate clocks for acquisition and processing, implement deterministic calibration tables, and verify operation across the full 0°C to 85°C industrial temperature range.
Embedded Control and Hardware Acceleration
XC4VLX60-10FFG668I can combine conventional control functions with hardware-accelerated datapaths in industrial controllers, embedded servers, and specialized interface systems. Dedicated multipliers and block RAM allow designers to implement fixed-point filters, encryption engines, or checksum functions more efficiently than general logic alone. The remaining fabric supports control state machines, diagnostics, and peripheral interfaces. Partition the design to avoid timing paths between unrelated clock domains, register accelerator outputs before routing them into control logic, and use the manufacturer power-reporting and thermal-analysis workflow to identify activity-dependent hotspots.
Справочные инженерные данные для XC4VLX60-10FFG668I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC4VLX60-10FFG668C | XC4VLX60-11FFG668C | XC4VLX60-12FFG668C | XC4VLX60-11FFG668I | XC4VLX60-12FFG668I | XC4VLX60-10FF668I |
|---|---|---|---|---|---|---|---|
| Package | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Speed Grade | -10 | -10 | -11 | -12 | -11 | -12 | -10 |
| Temperature Designation | Industrial, 0°C to 85°C | Commercial suffix C | Commercial suffix C | Commercial suffix C | Industrial suffix I | Industrial suffix I | Industrial suffix I |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Ключевые отличия
- Industrial temperature option with substantial logic capacity (против XC4VLX60-10FFG668C)
- Available timing margin increases at faster speed grades (против XC4VLX60-11FFG668I)
- High I/O density for parallel and mixed-signal interfaces (против XC4VLX60-10FF668I)
Заметки по проектированию
Use the official AMD Virtex-4 package files as the authority for every ball assignment, including power, ground, configuration, and differential pairs. A 668-ball FCBGA requires coordinated escape-routing and via-in-pad or microvia decisions. Define the stack-up before layout, preserve symmetric escape paths, and verify differential pair spacing against the fabricator's current process rules. Do not derive the footprint from the package height or ball count alone.
Implement separate core and I/O supply planes according to the manufacturer power requirements, including the specified 1.2 V core rail. Place bulk capacitance near the relevant supply balls and high-frequency decoupling close to each device region. Validate startup sequencing, voltage tolerances, and current limits for every rail. An estimated power calculation is not a substitute for activity-based implementation reporting because Virtex-4 consumption depends heavily on clocking, I/O activity, and configured logic.
Route clocks and high-speed serial interfaces as controlled-impedance differential pairs with continuous reference planes and minimized stub branches. Avoid routing high-speed signals parallel to BGA escape vias or switching-power paths, and use the dedicated clock-capable pins identified in the package files. Add series terminations only according to the device and board-level interface guidance. After layout, run signal-integrity and timing analysis using the actual PCB stack-up rather than nominal component dimensions.
The 668-ball package can concentrate heat in a small area, especially when the Virtex-4 fabric, block RAM, multipliers, and serial transceivers operate simultaneously. Provide uninterrupted copper beneath the device where the package construction permits, add thermal vias according to the manufacturer land pattern, and calculate the enclosure heat rise. Use post-layout power estimates to identify switching activity hot spots and verify worst-case ambient temperature against the industrial 0°C to 85°C operating range.
Информация о соответствии
The FFG668I ordering code is identified as Pb-free. RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the cited product information.