最后一次采购通知: XC4VLX60-10FFG668I 即将停产。最后下单日期: 联系我们. 查看可用的替代料号 →
AMD

XC4VLX60-10FFG668I - Virtex-4 LX FPGA | AMD | 668-BBGA

料号: XC4VLX60-10FFG668I ✗ 停产
1.2 V Vdss 668 pins Package 1,028 MHz Speed 2.81 Mbit Memory
最小起订量: 1 |

XC4VLX60-10FFG668I 概述

The AMD XC4VLX60-10FFG668I is a Virtex-4 LX field-programmable gate array built on 90 nm CMOS technology, with 59,904 logic cells, 26,624 adaptive logic modules, 448 I/O, and a 668-ball FCBGA package. The -10 suffix identifies the performance grade, while the I suffix denotes the industrial temperature option. This high-capacity FPGA belongs to the broader FPGA and CPLD hierarchy and is designed for configurable parallel processing, interface bridging, protocol termination, signal acquisition, and embedded control.

A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after fabrication. Unlike a fixed-function application-specific integrated circuit, an FPGA supports field-updatable logic and accommodates evolving interfaces or algorithms without requiring a new ASIC fabrication run. Within the Virtex product hierarchy, the XC4VLX60 belongs to the LX family, combining large programmable logic capacity with high-speed serial connectivity and substantial block-RAM resources.

The device provides 59,904 logic cells organized into 26,624 adaptive logic modules, along with 2.81 Mbit of embedded memory according to the published comparison data. Its 448 I/O and 668-ball package expose a high pin count for parallel buses, while dedicated high-speed serial transceivers support differential links. The -10 speed grade supports a logical design position within the Virtex-4 -12, -11, and -10 performance hierarchy.

The Virtex-4 architecture is implemented in 90 nm CMOS and combines configurable logic blocks with dedicated arithmetic, memory, clocking, and high-speed serial resources. Its 1.2 V core supply reduces core-rail power relative to earlier generations, although external I/O standards can require separate supply rails and careful interface design. Multiplier and block-RAM resources allow designers to partition datapaths between programmable logic, dedicated hardware, and memory rather than implementing every operation in general-purpose fabric.

Typical uses include industrial networking, telecommunications equipment, high-speed data acquisition, broadcast infrastructure, scientific instrumentation, and embedded processing platforms. The device can implement parallel-to-serial conversion, data-format conversion, packet processing, signal conditioning, and control functions in one package. It is particularly useful when design flexibility and deterministic hardware parallelism are more important than the unit cost and power efficiency of a smaller FPGA or ASIC.

Board design requires careful attention to the 668-ball BGA layout, multiple supply rails, decoupling, clock integrity, and high-speed serial routing. Use the AMD Virtex-4 package pinout files to assign every ball correctly, and follow the device power and decoupling guidance before finalizing layer stack-up. Configuration programming, startup behavior, JTAG access, and thermal management must also be validated for the complete system.

This product page combines the published device characteristics with same-family drop-in considerations, application guidance, package constraints, and selection trade-offs. It is intended to help engineers evaluate whether the XC4VLX60-10FFG668I provides the required Virtex-4 LX capacity and I/O density without overlooking legacy-tool, thermal, or board-layout restrictions.

直接替换替代料: XC4VLX60-10FFG668I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XC4VLX60-10FFG668I (相同外形与封装尺寸) ——差异在于 Device Type, Logic Cells, Mounting Type, Core Supply Voltage, Internal Frequency.

AMD
Device Type: Virtex-4 LX field-programmable gate array
Mounting Type: Surface mount
对比 XC4VLX60-10FFG668I →
AMD
Logic Cells: 6656
Mounting Type: Surface mount
Internal Frequency: 1028 MHz
对比 XC4VLX60-10FFG668I →
AMD
Device Type: Virtex-4 LX FPGA
Mounting Type: Surface mount
Core Supply Voltage: 1.14 V to 1.26 V
对比 XC4VLX60-10FFG668I →
AMD
Device Type: Virtex-4 LX field-programmable gate array
Mounting Type: Surface mount
Internal Frequency: 1028 MHz
对比 XC4VLX60-10FFG668I →

XC4VLX60-10FFG668C

✅ 直接替换 ⚠️ 规格未核验
AMD
📦 668-ball FCBGA
Virtex-4 LX field-programmable gate array (FPGA) · 6656 · 448 · 1028 MHz · -10 · 1.2 V · 90 nm CMOS · 668-ball FCBGA

联系询价

查看数据手册 →

XC4VLX60-11FFG668C

✅ 直接替换 ⚠️ 规格未核验
AMD
📦 668-ball FCBGA
Virtex-4 LX FPGA · 59,904 cells · 6,656 CLBs · 2,949,120 bits · 448 I/O · 668-ball FCBGA · 668 pins · Surface mount

联系询价

查看数据手册 →

XC4VLX60-12FFG668C

✅ 直接替换 ⚠️ 规格未核验
📦 668-ball FCBGA
Same 668-ball package and logic resources; -12 speed grade provides 20% greater nominal timing performance than -10, with a commercial temperature suffix

📋 参考替代料(不在目录中)

XC4VLX60-11FFG668I

✅ 直接替换 ⚠️ 规格未核验
AMD
📦 668-ball FCBGA
Virtex-4 LX field-programmable gate array · 59,904 cells · 6,656 blocks · 26,624 ALMs · 2.81 Mbit · 448 I/O · 448 inputs · 448 outputs

联系询价

查看数据手册 →

XC4VLX60-12FFG668I

✅ 直接替换 ⚠️ 规格未核验
📦 668-ball FCBGA
Same 668-ball package and industrial temperature grade; -12 speed grade provides 20% greater nominal timing performance than -10

📋 参考替代料(不在目录中)

XC4VLX60-10FF668I

✅ 直接替换
AMD
📦 668-ball FCBGA
Virtex-4 LX field-programmable gate array · 59,904 cells · 26,624 ALM · 2.81 Mbit · 448 I/O · 6,656 · 90 nm CMOS · 1.2 V

联系询价

查看数据手册 →

XC4VLX60-10FFG668I 最大额定值与电气特性

Device Type Virtex-4 LX field-programmable gate array (FPGA)
Logic Cells 59,904 cells
Adaptive Logic Modules 26,624 ALMs
Embedded Memory 2.81 Mbit
User I/O 448 I/O
Package Pins 668 pins
Package Type 668-ball FCBGA
Logic Family CMOS
Process Technology 90 nm CMOS
Core Supply Voltage 1.2 V
Performance Grade -10 speed grade
工作温度 0°C to 85°C
Internal Frequency 1,028 MHz
安装类型 Surface-mount FCBGA
Pb-Free Status Pb-free

XC4VLX60-10FFG668I 668-ball fcbga 引脚配置指南

XC4VLX60-10FFG668I(668-ball fcbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC4VLX60-10FFG668I 的 668-ball fcbga 封装引脚图

暂无详细引脚数据: XC4VLX60-10FFG668I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC4VLX60-10FFG668I 适用于 6 应用s: Industrial Networking and Protocol Conversion, Telecommunications Data-Path Processing, High-Speed Data Acquisition, Broadcast and Digital Video Infrastructure, Scientific and Test Instrumentation, Embedded Control and Hardware Acceleration.

🔧

Industrial Networking and Protocol Conversion

The AMD XC4VLX60-10FFG668I fits industrial gateways and protocol-conversion equipment requiring substantial parallel connectivity alongside configurable high-speed logic. Its 448 I/O can support wide data buses and control interfaces, while 59,904 logic cells allow packet classification, buffering, and format translation to be implemented in parallel. The -10 speed grade provides a defined timing class, and the industrial 0°C to 85°C range suits controlled industrial enclosures. Place serial channels away from sensitive parallel interfaces, use controlled-impedance routing, and reserve enough FPGA fabric for clock-domain crossing and system-level diagnostics.

🔧

Telecommunications Data-Path Processing

XC4VLX60-10FFG668I is appropriate for telecommunications equipment that must combine traffic classification, aggregation, line-rate interface adaptation, and supervisory logic. The large Virtex-4 LX fabric supports parallel pipeline architectures, while the dedicated serial capabilities can reduce external transceiver overhead for suitable links. Its 448 I/O provide ample control and status bandwidth, and 2.81 Mbit of embedded memory supports buffering and packet-state storage. Engineers should budget additional logic for clock recovery, lane alignment, error handling, and standards-specific framing rather than allocating the entire fabric to payload processing.

🔧

High-Speed Data Acquisition

The AMD XC4VLX60-10FFG668I can serve as the central processing device in instrumentation that captures, filters, and routes high-volume parallel data. Its 59,904 logic cells accommodate acquisition pipelines, trigger logic, digital filtering, and test-sequence control, while 448 I/O provide broad connectivity to converters, memory, and backplanes. The 1.2 V core supply supports efficient logic operation, but accurate timing closure remains critical because acquisition paths often combine wide buses with external clocking. Constrain input and output timing, use dedicated clock resources, and keep sensitive analog and digital grounds separated.

🔧

Broadcast and Digital Video Infrastructure

XC4VLX60-10FFG668I is suitable for broadcast routing, video processing, and digital content-transport systems requiring flexible parallel and serial interfaces. Programmable logic can perform pixel-format conversion, synchronization, ancillary-data handling, and interface bridging, while the Virtex-4 serial resources support compatible high-speed links. The large I/O count simplifies connections among receivers, routers, memory, and control processors. For video designs, establish deterministic clock domains and validate recovery behavior, synchronization intervals, and auxiliary-data latency against the target video standard before hardware release.

🔧

Scientific and Test Instrumentation

The AMD XC4VLX60-10FFG668I fits modular scientific instruments that combine sensor conditioning, calibration tables, acquisition control, and real-time processing in one programmable device. Its 59,904 logic cells allow parallel filtering and measurement pipelines, and 2.81 Mbit of embedded memory can support calibration data, trace buffers, or intermediate results. The 668-ball FCBGA package offers extensive connectivity but demands careful escape routing and thermal planning. Separate clocks for acquisition and processing, implement deterministic calibration tables, and verify operation across the full 0°C to 85°C industrial temperature range.

🔧

Embedded Control and Hardware Acceleration

XC4VLX60-10FFG668I can combine conventional control functions with hardware-accelerated datapaths in industrial controllers, embedded servers, and specialized interface systems. Dedicated multipliers and block RAM allow designers to implement fixed-point filters, encryption engines, or checksum functions more efficiently than general logic alone. The remaining fabric supports control state machines, diagnostics, and peripheral interfaces. Partition the design to avoid timing paths between unrelated clock domains, register accelerator outputs before routing them into control logic, and use the manufacturer power-reporting and thermal-analysis workflow to identify activity-dependent hotspots.

What is the AMD XC4VLX60-10FFG668I?
The AMD XC4VLX60-10FFG668I is a Virtex-4 LX FPGA with 59,904 logic cells, 26,624 adaptive logic modules, 448 I/O, and a 668-ball FCBGA package. It is manufactured on 90 nm CMOS and uses a 1.2 V core supply. According to AMD product documentation, the device belongs to the Virtex-4 LX family and is suitable for configurable networking, telecommunications, acquisition, and embedded signal-processing systems.
What are the key specifications of XC4VLX60-10FFG668I?
The XC4VLX60-10FFG668I combines 59,904 logic cells, 26,624 adaptive logic modules, 2.81 Mbit of embedded memory, 448 I/O, and a 668-ball FCBGA package. It uses 90 nm CMOS technology with a 1.2 V core supply and carries the -10 performance grade. Published operating-temperature information places the industrial-grade variant at 0°C to 85°C.
Where can I download the XC4VLX60-10FFG668I datasheet and pinout?
The XC4VLX60-10FFG668I datasheet and package information can be obtained from the AMD Virtex-4 documentation resources, while the official package assignment files are published on the AMD Virtex-4 package pinout page. Use the manufacturer pin-description table to identify all 668 balls and the exposed connections before laying out the PCB. The pinout files are specifically provided in ASCII text format.
What does the -10 grade mean in XC4VLX60-10FFG668I?
The -10 designation identifies the XC4VLX60-10FFG668I as a Virtex-4 LX -10 speed-grade device. AMD describes the Virtex-4 family in -12, -11, and -10 performance grades, with -12 positioned as the highest-performance grade. The speed suffix affects timing performance, while the FFG668 suffix identifies the 668-ball package and the I suffix identifies the industrial temperature option.
What is the difference between XC4VLX60-10FFG668I and XC4VLX60-10FF668I?
The XC4VLX60-10FFG668I and XC4VLX60-10FF668I both use the 668-ball Virtex-4 LX package, the same -10 speed grade, and 59,904 logic cells. The primary ordering distinction is the G package designation associated with the lead-free package construction. The FFG668I variant is explicitly identified as Pb-free, while both devices retain 448 I/O and a 668-ball FCBGA footprint for board-level interchangeability.
What can replace XC4VLX60-10FFG668I?
The closest same-family drop-in candidates are other XC4VLX60 devices in the 668-ball FFG package, such as XC4VLX60-10FFG668C, XC4VLX60-11FFG668C, and XC4VLX60-12FFG668C. They preserve the package, logic-cell count, and major Virtex-4 LX resources, but differ in speed or temperature suffix. Confirm the required timing margin, operating temperature, and configuration behavior before substitution.
Is XC4VLX60-10FFG668I the same as XC4VLX60-10FF668I?
The two devices are electrically positioned as the same XC4VLX60-10 grade in the same 668-ball package, but their ordering codes are not identical. XC4VLX60-10FFG668I is the Pb-free FFG668 version, whereas XC4VLX60-10FF668I uses the alternate package suffix. Both provide 59,904 logic cells, 448 I/O, and the same 668-ball FCBGA outline, subject to final procurement and assembly validation.
When should I choose XC4VLX60-10FFG668I over a faster XC4VLX60 grade?
Choose XC4VLX60-10FFG668I when a design meets its timing requirements at the -10 speed grade and requires the industrial 0°C to 85°C option. A -11 or -12 grade provides additional timing margin, which can be valuable for demanding clock rates or poorly constrained interfaces. The faster grades do not change the basic 668-ball package arrangement, but the design must still be revalidated at the selected speed grade.
Is XC4VLX60-10FFG668I suitable for industrial networking equipment?
Yes, the XC4VLX60-10FFG668I is suitable for industrial networking equipment that benefits from programmable logic, extensive parallel I/O, and dedicated high-speed resources. Its 59,904 logic cells can support protocol conversion, packet inspection, buffering, and control functions, while 448 I/O serve wide external buses. The industrial temperature designation covers 0°C to 85°C, subject to correct airflow, thermal design, and power-supply implementation.
How does XC4VLX60-10FFG668I compare with XC4VLX60-11FFG668C?
Both devices share the XC4VLX60 Virtex-4 LX architecture, 59,904 logic cells, 26,624 adaptive logic modules, 448 I/O, and the 668-ball FCBGA package. The -10 target uses the industrial temperature option, whereas the -11 comparison part carries the C commercial-temperature suffix. The -11 part also provides one higher timing grade, giving it approximately 10% greater nominal speed-grade positioning.
What is the best AMD equivalent for XC4VLX60-10FFG668I?
The best AMD equivalent depends on whether timing margin or operating-temperature coverage is the priority. XC4VLX60-10FFG668C matches the -10 speed grade and package but uses a different temperature suffix, while XC4VLX60-11FFG668C provides a faster timing grade in the same footprint. Both are same-brand, same-family choices rather than cross-brand substitutes, and each must be checked against the original system requirements.
Does XC4VLX60-10FFG668I need an external memory for design data?
The XC4VLX60-10FFG668I is a configurable FPGA, so the implementation requires a device-programming path and nonvolatile or controller-managed configuration storage appropriate to the selected boot architecture. The exact interface and required storage depend on the configuration mode and board design. Consult the AMD Virtex-4 configuration documentation and assign the configuration pins, clock, and storage interface from the manufacturer pin-description table.
What power rails and decoupling are required for XC4VLX60-10FFG668I?
The XC4VLX60-10FFG668I uses a 1.2 V core supply, and its I/O circuitry may require additional rails depending on the selected standards. Exact rail sequencing, tolerance, current limits, and decoupling values are defined by the manufacturer device documentation. Place the specified bulk and high-frequency decoupling capacitors close to their assigned balls, follow the recommended power-plane geometry, and verify sequencing before using the -10 timing grade.
How should a PCB be laid out for the 668-ball XC4VLX60-10FFG668I?
A PCB for the XC4VLX60-10FFG668I should use the manufacturer package files for every ball assignment and account for BGA escape routing, power-plane distribution, and high-speed differential pairs. Keep decoupling close to the relevant supply balls and route clocks and serial interfaces with controlled impedance and return paths. The 668-ball footprint requires careful via planning beneath the device, so stack-up and escape geometry should be reviewed before release.
Where can I request a quote for XC4VLX60-10FFG668I?
Use the Request a Quote form on this page to request the current XC4VLX60-10FFG668I price, stock position, minimum order quantity, and lead time. Quote requests should include the required package suffix, temperature grade, quantity, and any programming or inspection requirements. Because this is a mature FPGA family, current lifecycle and supply conditions should be confirmed when the quotation is returned.
Is XC4VLX60-10FFG668I in stock, and what is its lead time?
Current stock and lead time for the XC4VLX60-10FFG668I should be requested through the Request a Quote form on this page. Include the exact MPN XC4VLX60-10FFG668I, required quantity, and whether factory programming or inspection is needed. This approach provides a transaction-specific confirmation rather than relying on a potentially stale inventory indication.
How does the price of XC4VLX60-10FFG668I compare with other XC4VLX60 variants?
A current transaction-specific comparison should be obtained through the Request a Quote form on this page, including the desired speed grade, temperature suffix, and order quantity. Differences between -10, -11, and -12 grades can reflect supply position, programming requirements, and market availability even when the package is unchanged. Quote the exact required MPN rather than relying on a generic Virtex-4 LX price.

工程参考数据: XC4VLX60-10FFG668I ——对比、设计指导和合规信息。

选型指南

Choose XC4VLX60-10FFG668I when the design requires the Virtex-4 LX fabric, 59,904 logic cells, 448 I/O, the -10 speed grade, and industrial 0°C to 85°C operation. Choose the -10 FFG668C variant when commercial-temperature coverage is sufficient and preserving the exact -10 timing class is important. Choose XC4VLX60-11FFG668I or XC4VLX60-12FFG668I when additional timing margin is needed for demanding clocks or interfaces while retaining the industrial designation. XC4VLX60-10FF668I is another 668-ball, -10 option with the same core resource count, but assembly and procurement specifications should be checked for the package suffix. All listed choices share the same 668-ball architecture, so board layout can remain unchanged; however, speed-grade timing, temperature limits, configuration behavior, and legacy tool support must be revalidated for every substitution.

与替代料对比

参数 本产品 XC4VLX60-10FFG668C XC4VLX60-11FFG668C XC4VLX60-12FFG668C XC4VLX60-11FFG668I XC4VLX60-12FFG668I XC4VLX60-10FF668I
Package 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA
Brand AMD AMD AMD AMD AMD AMD AMD
Device Family Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX
Logic Cells 59,904 cells 59,904 cells 59,904 cells 59,904 cells 59,904 cells 59,904 cells 59,904 cells
User I/O 448 I/O 448 I/O 448 I/O 448 I/O 448 I/O 448 I/O 448 I/O
Speed Grade -10 -10 -11 -12 -11 -12 -10
Temperature Designation Industrial, 0°C to 85°C Commercial suffix C Commercial suffix C Commercial suffix C Industrial suffix I Industrial suffix I Industrial suffix I
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS

关键差异点

  • Industrial temperature option with substantial logic capacity (对比 XC4VLX60-10FFG668C)
  • Available timing margin increases at faster speed grades (对比 XC4VLX60-11FFG668I)
  • High I/O density for parallel and mixed-signal interfaces (对比 XC4VLX60-10FF668I)

设计说明

Use the official AMD Virtex-4 package files as the authority for every ball assignment, including power, ground, configuration, and differential pairs. A 668-ball FCBGA requires coordinated escape-routing and via-in-pad or microvia decisions. Define the stack-up before layout, preserve symmetric escape paths, and verify differential pair spacing against the fabricator's current process rules. Do not derive the footprint from the package height or ball count alone.

Implement separate core and I/O supply planes according to the manufacturer power requirements, including the specified 1.2 V core rail. Place bulk capacitance near the relevant supply balls and high-frequency decoupling close to each device region. Validate startup sequencing, voltage tolerances, and current limits for every rail. An estimated power calculation is not a substitute for activity-based implementation reporting because Virtex-4 consumption depends heavily on clocking, I/O activity, and configured logic.

Route clocks and high-speed serial interfaces as controlled-impedance differential pairs with continuous reference planes and minimized stub branches. Avoid routing high-speed signals parallel to BGA escape vias or switching-power paths, and use the dedicated clock-capable pins identified in the package files. Add series terminations only according to the device and board-level interface guidance. After layout, run signal-integrity and timing analysis using the actual PCB stack-up rather than nominal component dimensions.

The 668-ball package can concentrate heat in a small area, especially when the Virtex-4 fabric, block RAM, multipliers, and serial transceivers operate simultaneously. Provide uninterrupted copper beneath the device where the package construction permits, add thermal vias according to the manufacturer land pattern, and calculate the enclosure heat rise. Use post-layout power estimates to identify switching activity hot spots and verify worst-case ambient temperature against the industrial 0°C to 85°C operating range.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The FFG668I ordering code is identified as Pb-free. RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the cited product information.

数据核验日期: 2026-11-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

XC4VLX60-10FFG668I XC4VLX60-10FFG668I datasheet XC4VLX60-10FFG668I datasheet pdf XC4VLX60-10FFG668I pinout XC4VLX60-10FFG668I footprint AMD XC4VLX60-10FFG668I XC4VLX60-10FFG668I specifications XC4VLX60-10FFG668I replacement XC4VLX60-10FFG668I equivalent XC4VLX60-10FFG668I vs XC4VLX60-10FF668I XC4VLX60-10FFG668I price XC4VLX60-10FFG668I stock XC4VLX60 668 ball FPGA XC4VLX60-10FFG668I industrial networking

相关元器件 & 术语

AMD Xilinx XC4VLX60-10FFG668I XC4VLX60-10FF668I XC4VLX60-10FFG668C XC4VLX60-11FFG668C XC4VLX60-12FFG668C XC4VLX60-11FFG668I XC4VLX60-12FFG668I Virtex-4 LX field-programmable gate array FPGA CPLD programmable logic adaptive logic module embedded block RAM high-speed serial transceiver 90 nm CMOS FCBGA-668 surface-mount BGA 1.2 V core supply industrial temperature grade industrial networking telecommunications data acquisition digital video infrastructure scientific instrumentation hardware acceleration signal integrity Pb-free
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情