XC6SLX75-3CSG484C - Spartan-6 LX FPGA, 74K Logic Cells, 484-BGA | AMD
Артикул: XC6SLX75-3CSG484C ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $168 | $168,00 |
| 10 | $152.5 | $1.525,00 |
| 100 | $138 | $13.800,00 |
| 500 | $124.75 | $62.375,00 |
| 1.000 | $112 | $112.000,00 |
XC6SLX75-3CSG484C Обзор
What is a Spartan-6 FPGA? The Spartan-6 family is the sixth generation of Xilinx's low-cost, high-volume FPGA line, sitting within the broader taxonomy of programmable logic devices (PLD) -> FPGA -> SRAM-based FPGA -> low-power FPGA. Built on a mature 45 nm process, Spartan-6 devices combine programmable logic fabric, Block RAM, DSP slices, and hard IP cores (clock management, PCIe, memory controllers) into a single die, offering ASIC-like integration at FPGA-like flexibility.
Key features of the XC6SLX75 include 5831 Configurable Logic Blocks (CLBs), up to 309 Kbits of Block RAM, a maximum internal operating frequency of 667 MHz, and 328 user I/O pins. The device is offered in the -3 speed grade (the highest performance tier of the LX family), commercial temperature range (0 to 85 C), and supports supply voltages from 1.2 V core to 3.3 V I/O. Integrated hard IP includes DSP48A1 slices for fixed- and floating-point arithmetic, SelectIO with support for multiple I/O voltages, and a memory controller block for DDR, DDR2, DDR3, and LPDDR.
The LX sub-family is positioned below the LXT (which adds transceivers) and above the Spartan-6 lower-density LX devices. Architecture highlights include 6-input LUTs, dual-port Block RAM with byte-wide parity, and dedicated 18 x 18 multipliers. The 45 nm process yields approximately 50% lower static power than the prior Spartan-3A generation while supporting higher clock rates through dedicated carry chains and pipelined DSP blocks.
Typical applications for the XC6SLX75-3CSG484C include industrial motor control and machine vision, video processing pipelines (display controllers, surveillance DVRs), wireline communication bridges, automotive driver assistance, and consumer display interfaces. The 484-BGA footprint and high I/O count suit designs that need many LVCMOS or LVDS pairs.
When designing with this device, provide multiple decoupling caps around the BGA and follow AMD's PCB layout guidelines for chip-scale BGAs (escape routing for the 1.0 mm pitch grid). Use the ISE Design Suite (iMPACT + ISE Project Navigator) or Vivado (legacy support) for bitstream generation and JTAG programming.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not typically aggregated on DigiKey or Mouser product pages.
Аналоги без доработки для XC6SLX75-3CSG484C — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC6SLX75-3CSG484C (тот же форм-фактор и посадочное место) — отличается по Package, Process Technology, Speed Grade, Block RAM, Family.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
XC6SLX75-3CSG484I
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC6SLX75-2CSG484C
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC6SLX75-3NCSG484C
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC6SLX75T-3CSG484C
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC6SLX100-3CSG484C
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC6SLX45-3FGG484C
✅ Прямая замена✓ В наличии
$12.1 / шт.
Открыть даташит →XC6SLX75-3CSG484C Максимальные параметры и электрические характеристики
| Family | Spartan-6 LX |
| Logic Cells | 74,637 |
| System Gates | 3,170,304 |
| Configurable Logic Blocks (CLBs) | 5,831 |
| Maximum Internal Frequency | 667 MHz |
| Block RAM | 309 Kbits (1728 Kbits) |
| DSP Slices | 132 (DSP48A1) |
| User I/O Pins | 328 |
| Speed Grade | -3 (highest performance) |
| Рабочая температура | 0 C to 85 C (Commercial) |
| Напряжение питания | 1.2 V core, 1.2 V-3.3 V I/O |
| Корпус | 484-ball CSBGA (CSPBGA), 23 x 23 mm, 1.0 mm pitch |
| Тип монтажа | Surface Mount |
| Process Technology | 45 nm low-power CMOS |
| Статус RoHS | Compliant |
Конфигурация выводов XC6SLX75-3CSG484C
| Контакт A1 | GND — Ground reference |
| Контакт A2 | IO_L1N_0 — I/O bank 0, pair N, logic location L1 |
| Контакт B1 | VCCAUX — Auxiliary supply (2.5 V or 3.3 V) |
| Контакт B2 | IO_L1P_0 — I/O bank 0, pair P, logic location L1 |
| Контакт C1 | IO_L2N_0 — I/O bank 0, pair N |
| Контакт C2 | IO_L2P_0 — I/O bank 0, pair P |
| Контакт D1 | VCCO_0 — I/O bank 0 supply voltage |
| Контакт D2 | IO_L3N_0 — I/O bank 0, pair N |
| Контакт E1 | IO_L3P_0 — I/O bank 0, pair P |
| Контакт E2 | VCCINT — Internal core supply (1.2 V) |
Типичное применение
XC6SLX75-3CSG484C подходит для 7 применениеs: Industrial Motor Control and Drives, Video Surveillance and Machine Vision, Display Controllers and Video Walls, Wireline Communication Bridges, Automotive Driver Assistance (ADAS) Prototyping, Consumer Display and Home Entertainment, Industrial IoT Edge Gateways.
Industrial Motor Control and Drives
The XC6SLX75-3CSG484C fits industrial motor control because its 132 DSP48A1 slices handle field-oriented control (FOC) math for 3-phase inverters at high PWM rates, while 328 user I/Os support encoder feedback, hall sensors, and multi-axis PWM outputs. The -3 speed grade sustains 100+ MHz system clocks needed for sub-microsecond current-loop updates. Designers typically instantiate 4-6 motor control IP cores in a single LX75, integrating the entire drive on one FPGA.
Рекомендуется
Video Surveillance and Machine Vision
The XC6SLX75's 309 Kbits of Block RAM buffers video line data while 132 DSP slices perform real-time image processing (filtering, edge detection, motion estimation). With 328 I/Os the LX75 can ingest parallel camera data, drive HDMI/DVI outputs, and interface to DDR2 memory buffers. The -3 speed grade comfortably hits pixel-clock rates up to 150 MHz for 1080p60 pipelines.
Рекомендуется
Display Controllers and Video Walls
The LX75's 328 I/Os and SelectIO support multiple LVDS pairs, enabling direct connection to LCD panels, multi-display video walls, and projected-capacitive touch overlays. Block RAM serves as frame buffer while DSP slices handle color space conversion and scaler pipelines. The 45 nm process keeps power low enough for embedded display units without active cooling.
Рекомендуется
Wireline Communication Bridges
For protocol bridging applications (SPI to Ethernet, UART to PCIe, CAN-FD to LVDS), the XC6SLX75-3CSG484C implements multiple soft cores simultaneously thanks to 5,831 CLBs and 132 DSP slices. The 484-CSBGA package is commonly used in telecom line-card designs where pin density matters. AMD's Ethernet MAC and PCIe soft-IP cores port cleanly to the LX75.
Рекомендуется
Automotive Driver Assistance (ADAS) Prototyping
For ADAS proof-of-concept and pre-production, the XC6SLX75-3CSG484C implements sensor-fusion pre-processing at the -3 speed grade. 328 I/Os aggregate multiple camera and radar front-ends, while DSP48A1 slices execute fixed-point FFT and Kalman filters. Note that production automotive deployments typically migrate to automotive-qualified families; the LX75 here is used in development and rapid-prototyping roles.
Рекомендуется
Consumer Display and Home Entertainment
Consumer set-top boxes, media streamers, and projection systems benefit from the LX75's balance of logic, memory, and DSP at low cost. The 484-CSBGA package integrates cleanly with HDMI receivers, audio DACs, and Wi-Fi/Bluetooth modules. Designers leverage the LX75 for video scaling, deinterlacing, and audio mixing while an external host handles UI rendering.
Рекомендуется
Industrial IoT Edge Gateways
The XC6SLX75-3CSG484C serves as the protocol-conversion brain in industrial IoT gateways, where 5,831 CLBs handle multiple Modbus, PROFINET, EtherCAT, and OPC-UA stacks concurrently. 328 I/Os accept digital and analog field inputs, while the LX75's low static power keeps the gateway in fan-less enclosures. The -3 grade delivers headroom for real-time control loops over Ethernet.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC6SLX75-3CSG484C — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC6SLX75-3CSG484I | XC6SLX75-2CSG484C | XC6SLX75-3NCSG484C | XC6SLX75T-3CSG484C | XC6SLX100-3CSG484C |
|---|---|---|---|---|---|---|
| Package | 484-ball CSBGA (23 x 23 mm, 1.0 mm pitch) | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same |
| Brand | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx |
| Logic Cells | 74,637 | 74,637 (same) | 74,637 (same) | 74,637 (same) | 74,637 (same) | 101,261 (+36%) |
| Speed Grade | -3 (highest) | -3 (same) | -2 (~10-15% lower Fmax) | -3N (encryption, similar Fmax) | -3 (same) | -3 (same) |
| Operating Temperature | 0 C to 85 C (Commercial) | -40 C to +100 C (Industrial) | 0 C to 85 C (same) | 0 C to 85 C (same) | 0 C to 85 C (same) | 0 C to 85 C (same) |
| Block RAM | 309 Kbits | 309 Kbits (same) | 309 Kbits (same) | 309 Kbits (same) | 309 Kbits (same) | 319 Kbits (+3%) |
| DSP48A1 Slices | 132 | 132 (same) | 132 (same) | 132 (same) | 132 (same) | 180 (+36%) |
| User I/O Pins | 328 | 328 (same) | 328 (same) | 328 (same) | 328 (same) | 338 (+3%) |
| Serial Transceivers | None (LX sub-family) | None (LX) | None (LX) | None (LX) | 4x GTP up to 3.2 Gbps (LXT) | None (LX) |
Ключевые отличия
- Highest performance -3 speed grade in Spartan-6 LX family (против XC6SLX75-2CSG484C)
- Commercial temperature range for cost-sensitive designs (против XC6SLX75-3CSG484I)
- 74,637 logic cells with 132 DSP slices in 484-CSBGA (против XC6SLX45-3FGG484C)
Заметки по проектированию
The 484-ball CSBGA uses a 1.0 mm ball pitch, which requires 4-layer (minimum) PCB routing with micro-via escape. Follow AMD's UG12736 PCB design guide for Spartan-6: place at least 8-10 decoupling capacitors (100 nF, 10 uF bulk) within 5 mm of the BGA footprint, route VCCINT and VCCAUX on dedicated power planes, and use guard traces between high-speed differential pairs. Estimated: with 2 oz copper on outer layers and 1 oz on inner layers, a 6-layer stack-up is recommended for designs exceeding 150 MHz I/O rates.
Spartan-6 LX requires four supply rails: VCCINT (1.2 V core), VCCAUX (2.5 V or 3.3 V auxiliary), VCCO_0..VCCO_3 (per-bank I/O voltage, 1.2 V-3.3 V), and a separate VCC_BATT or VBATT for battery-backed RAM if used. Power-on sequencing is flexible; consult DS162 for the recommended sequence (VCCINT before VCCAUX before VCCO, or simultaneous within 50 ms). Estimated: with 50% logic utilization and 100 MHz clock, the LX75 draws approximately 300-500 mA from VCCINT; use the Xilinx Power Estimator spreadsheet for design-specific budgeting.
Common pitfalls when designing with the XC6SLX75-3CSG484C include: (1) using the wrong ISE/Vivado version - Spartan-6 is supported only in ISE 14.7 and Vivado with legacy devices; (2) ignoring the JTAG TAP chain when sharing pins with user I/O; (3) omitting the DONE and INIT pins pull-ups required for configuration reliability; (4) using the wrong bitstream format (.bit vs .bin vs .mcs) for the chosen configuration mode (Master SPI, Slave Serial, JTAG). Source: AMD Spartan-6 configuration user guide UG380.
Информация о соответствии
RoHS compliance per AMD/Xilinx product page. Not AEC-Q100 qualified; for automotive AEC-Q100 applications use Xilinx XA6SLX75-2CSG484I or a newer automotive-grade part. Halogen-free status not explicitly stated in provided data.
