XC7A35T-L2CPG236E - 28nm Artix-7 FPGA, 106 I/O | AMD
Артикул: XC7A35T-L2CPG236E ✓ АктивенXC7A35T-L2CPG236E Обзор
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and dedicated input/output resources. The Artix-7 family combines low power consumption and cost with the performance of a 28 nm programmable logic architecture. Within the power-management IC and FPGA hierarchy, this device acts as a reconfigurable digital platform rather than a fixed-function processor, allowing interface bridging, signal processing, control logic, and hardware acceleration to be implemented in one package.
Key characteristics include 33,280 logic cells, 106 user I/O, a 0.9 V core supply, and operation from a 238-ball CSBGA package. The I/O count and package combination suit communications, industrial control, test equipment, embedded vision, and general-purpose prototyping systems. Because an FPGA pin assignment, power architecture, and bank voltage are design-specific, the complete package pinout and electrical limits must be taken from the AMD Artix-7 documentation and package pinout files.
The XC7A35T family is positioned between low-cost CPLDs and larger programmable SoCs. It is appropriate when a design needs parallel logic, moderate serial connectivity, deterministic timing, or frequent design revisions without changing the PCB. The -2 grade provides a different speed qualification than -1 devices, so timing constraints, tool settings, and production qualification should be reviewed before substituting speed grades.
Typical deployments include industrial automation, robotics, communications infrastructure, instrumentation, embedded control, and low-cost prototyping. The 238-CSBGA footprint requires careful ball assignment, decoupling, power planning, and signal-integrity layout. The package also requires appropriate assembly capability and thermal verification for designs operating near the device's upper temperature limits.
A key design consideration is that the FPGA is only one element of the power tree. Separate VCCINT, VCCAUX, VCCO, and other supply requirements must be generated with appropriate sequencing and decoupling. Designers should also reserve configuration resources, validate every pin against the package files, and confirm that the selected bitstream, timing constraints, and board-level interfaces are supported before production release.
Аналоги без доработки для XC7A35T-L2CPG236E — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC7A35T-L2CPG236E (тот же форм-фактор и посадочное место) — отличается по Logic Cells, Process Technology, Product Type, RoHS Status.
XC7A35T-1CPG236C
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A35T-1CPG236I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC7A35T-2CPG236C
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC7A35T-2CPG236I
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A35T-1CPG236E
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC7A35T-L2CPG236E Максимальные параметры и электрические характеристики
| FPGA Family | Artix-7 |
| Logic Cells | 33,280 |
| User I/O Pins | 106 |
| Process Technology | 28 nm |
| Core Supply Voltage | 0.9 V |
| Package Type | 238-CSBGA |
| Package Pin Count | 238 |
| Speed Grade | -2 |
| Temperature Grade Suffix | E |
| Product Type | Field-Programmable Gate Array |
| Architecture | 28 nm Artix-7 FPGA architecture |
| Programmable Logic | 33,280 logic cells |
| User I/O Resources | 106 user I/O pins |
| Тип монтажа | Surface Mount |
| Ball Grid Array | CSBGA |
| Manufacturer | AMD / Xilinx |
| Статус RoHS | unknown |
| REACH Status | unknown |
Руководство по цоколевке XC7A35T-L2CPG236E в корпусе 238
Цоколевка для XC7A35T-L2CPG236E (корпус 238). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC7A35T-L2CPG236E.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC7A35T-L2CPG236E подходит для 6 применениеs: Industrial Automation Controller, Robotics Control Platform, Communications Interface Bridge, Test and Measurement Equipment, Embedded Vision and Sensor Hub, Low-Cost FPGA Prototyping.
Industrial Automation Controller
The XC7A35T-L2CPG236E is suitable for industrial automation when a controller needs parallel I/O, deterministic programmable logic, and flexible communication interfaces. Its 33,280 logic cells can implement sequencing, interlocks, counters, and protocol conversion, while 106 user I/O pins support sensors, actuators, encoders, and digital buses. The 28 nm Artix-7 architecture is appropriate for compact industrial modules that must be reprogrammable during commissioning. Designers should use the package-specific pinout files to separate I/O banks, plan VCCO for the attached logic levels, and validate timing with the required AMD tools before releasing a controller revision.
Рекомендуется
Robotics Control Platform
A robot motion controller can use the XC7A35T-L2CPG236E for real-time position loops, sensor fusion pre-processing, and safety interlock logic. The FPGA fabric allows multiple independent control channels to run concurrently, and the 106-I/O budget can accommodate digital encoders, limit switches, motor drivers, and communication transceivers. The -2 speed grade provides additional timing margin for deterministic control paths, subject to final static timing analysis. Keep motor power and FPGA logic supplies on separate, properly filtered rails, and use the AMD package files to preserve ball assignments when planning a new robotics carrier board.
Рекомендуется
Communications Interface Bridge
The XC7A35T-L2CPG236E can bridge legacy parallel interfaces to modern serial links in access equipment, instrumentation, and industrial gateways. Its programmable logic resources support protocol converters, FIFOs, clock-domain crossing, and custom framing, while the 106 user I/O provide ample parallel-side connectivity. The -2 grade is useful when interface timing margins are tight or several fixed-rate channels must operate concurrently. A robust design should define clock topology, constrain timing for every I/O standard, isolate external transceiver supplies, and verify signal integrity at the selected board connector and cable environment.
Рекомендуется
Test and Measurement Equipment
In test and measurement products, the XC7A35T-L2CPG236E can implement acquisition control, timing generation, pattern processing, and data formatting in one programmable device. The 33,280 logic cells are appropriate for moderate parallel data paths, while the 106-I/O count supports triggering, status indicators, instrument buses, and external memory interfaces. The FPGA architecture allows measurement algorithms to be updated without changing the instrument hardware, which is valuable for laboratory and manufacturing test platforms. Keep analog, clock, and digital sections partitioned carefully, and verify that the selected package and I/O voltage banks meet the front-panel and fixture requirements.
Рекомендуется
Embedded Vision and Sensor Hub
The XC7A35T-L2CPG236E is a practical controller for sensor aggregation, image pre-processing, frame timing, and command routing in embedded vision systems. Programmable logic can connect cameras or sensors to memory and a host processor while adding deterministic filtering or trigger synchronization. Its 106 user I/O pins allow multiple digital sensors, serial links, and synchronization signals to coexist in a compact design. The 28 nm device provides a compact programmable implementation without requiring a separate FPGA for every interface function. Validate high-speed I/O timing, use controlled-impedance routing for external links, and check thermal margins when the fabric operates continuously.
Рекомендуется
Low-Cost FPGA Prototyping
The XC7A35T-L2CPG236E works well for prototypes that need more logic and I/O than a small CPLD while retaining Artix-7's low-cost positioning. Engineers can prototype parallel buses, custom peripherals, control loops, and interface adapters before moving to a production board. The 238-CSBGA footprint requires a fine-pitch assembly process and careful ball-assignment review, so use a development board or a validated carrier design during early bring-up. Program the device through the intended configuration interface and preserve the exact pin constraints in project files, since changing the suffix or package can invalidate otherwise compatible prototype assumptions.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC7A35T-L2CPG236E — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC7A35T-1CPG236C | XC7A35T-1CPG236I | XC7A35T-2CPG236C | XC7A35T-2CPG236I | XC7A35T-1CPG236E |
|---|---|---|---|---|---|---|
| Package | 238-CSBGA | 238-CSBGA | 238-CSBGA | 238-CSBGA | 238-CSBGA | 238-CSBGA |
| Brand | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx |
| Logic Cells | 33,280 | 33,280 | 33,280 | 33,280 | 33,280 | 33,280 |
| User I/O | 106 | 106 | 106 | 106 | 106 | 106 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V |
| Speed Grade | -2 | -1 | -1 | -2 | -2 | -1 |
| Temperature Suffix | E | C | I | C | I | E |
Ключевые отличия
- Faster speed grade within the same Artix-7 family (против XC7A35T-1CPG236C)
- Extended-temperature suffix (против XC7A35T-2CPG236C)
- Same-package migration family (против XC7A35T-1CPG236I)
Заметки по проектированию
Design the FPGA power tree around the separate supply requirements of VCCINT, VCCAUX, VCCO, and any additional device rails. Place the required decoupling capacitors close to the associated balls and follow the recommended values and topology in the AMD Artix-7 power guidance. Confirm sequencing, voltage tolerances, and power-up behavior in the device datasheet.
The 238-CSBGA footprint requires fine-pitch routing, multilayer construction, and careful escape planning from the FPGA balls. Assign every ball in the package-specific constraint file, maintain the required power and ground connectivity, and use controlled-impedance routing for high-speed interfaces. Validate the PCB stackup and escape paths before releasing the board for fabrication.
Estimate the FPGA's dissipation from the selected speed grade, I/O activity, core voltage, and utilization rather than assuming that the -2 grade always operates at the same power. Provide adequate exposed-board thermal paths, avoid placing heat-sensitive components in the hottest region, and verify junction-temperature margin with the manufacturer thermal model and the actual PCB stackup.
Do not treat a same-package Artix-7 suffix change as automatically equivalent. The speed grade changes timing margins, while the temperature suffix changes the environmental qualification. Re-run timing analysis, verify the configuration file and pin constraints, and review the exact ordering code before approving a replacement for the XC7A35T-L2CPG236E.
Информация о соответствии
Compliance declarations were not identified in the available product results. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral requirements with the manufacturer or the applicable supplier documentation.