Infineon

XMC4500F100K1024AAXQSA1 - 120MHz Cortex-M4 | Infineon

Артикул: XMC4500F100K1024AAXQSA1 ✓ Активен
3.3 V Vdss PG-LQFP-100-11 Package 120 MHz Speed 1024 kByte Memory
MOQ: 1 |

XMC4500F100K1024AAXQSA1 Обзор

The Infineon Technologies XMC4500F100K1024AAXQSA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 1024 kByte of flash memory and integrated Ethernet connectivity, in a 100-pin PG-LQFP package.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The XMC4500 belongs to the XMC4000 family of 32-bit ARM microcontrollers. Its hierarchy is ARM Cortex-M4 microcontroller, embedded processor, and programmable control IC. The XMC4000 family combines the ARM Cortex-M4 core with a configurable peripheral set intended to support application-specific industrial control systems.

Three headline specifications define the XMC4500F100K1024AAXQSA1: a 120 MHz Cortex-M4 core, 1024 kByte of flash memory, and Ethernet connectivity. The flash is organized as 1 MB, or 1M by 8 bits, according to distributor product listings. These characteristics make the device suitable for industrial embedded systems that require deterministic control processing, substantial local program storage, and network communication.

The part belongs to the XMC4500-F100x1024 device group, whose manufacturer datasheet covers ordering designations, electrical characteristics, physical characteristics, and supported peripheral functions. The manufacturer describes the XMC4000 platform as combining an ARM Cortex-M4 core with a configurable peripheral set. That architecture allows designers to tailor the controller around particular measurement, communication, and industrial-control requirements rather than relying on a fixed peripheral arrangement.

Typical uses include industrial Ethernet equipment, factory automation controllers, connected sensor hubs, building automation equipment, and industrial data-acquisition systems. The Ethernet interface supports connected control architectures, while the 120 MHz Cortex-M4 processing capability is suited to real-time supervisory and control tasks. The 1024 kByte flash also provides practical space for application firmware, configuration data, and field-upgrade handling within a single embedded device.

The 100-pin LQFP package provides a substantial pin count for mixed-signal and peripheral-heavy industrial designs. Board layout should preserve the pin-oriented package geometry and route sensitive analog or communications signals away from high-current switching paths. Firmware selection and peripheral configuration should be validated against the exact ordering code and pin multiplexing table in the manufacturer datasheet before production release.

This page combines the exact ordering information, package details, memory configuration, processor capability, and Ethernet feature with application guidance, engineering considerations, and a focused drop-in comparison. It is intended to help engineers determine whether the XMC4500F100K1024AAXQSA1 fits an industrial embedded design before beginning PCB implementation.

Аналоги без доработки для XMC4500F100K1024AAXQSA1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с XMC4500F100K1024AAXQSA1 (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Package.

Infineon
Mounting Type: Surface Mount
Package: PG-LQFP-100-11 (100-pin LQFP)
Сравнить с XMC4500F100K1024AAXQSA1 →

XMC4500F100K1024ACXQSA1

✅ Прямая замена
Infineon
📦 PG-LQFP-100-11
ARM Cortex-M4 with FPU · 120 MHz · 32-bit · 1024 KB (1M x 8) · 160 KB · PG-LQFP-100-11 (100-pin LQFP) · Surface Mount · 3.0 V to 3.6 V

Уточнить цену

Открыть даташит →

XMC4500F100K1024ABXQMA1

✅ Прямая замена
📦 PG-LQFP-100-11
Ordering code differs from AAXQSA1, while the XMC4500-F100x1024 family core and 1024 kByte memory ratings differ by 0%; qualification and suffix-specific limits require confirmation

📋 Справочный аналог (нет в каталоге)

XMC4500-F100K1024-AA

✅ Прямая замена
📦 PG-LQFP-100-11
Manufacturer ordering designation omits the full XQSA1 suffix, while the 120 MHz Cortex-M4 and 1024 kByte flash ratings differ by 0%; exact suffix attributes require confirmation

📋 Справочный аналог (нет в каталоге)

XMC4500-F100K1024-AC

✅ Прямая замена
📦 PG-LQFP-100-11
Manufacturer ordering designation uses the AC configuration rather than AA, while the documented 120 MHz core and 1024 kByte flash ratings differ by 0%; qualification details require confirmation

📋 Справочный аналог (нет в каталоге)

XMC4500F100K1024AAXQSA1 Максимальные параметры и электрические характеристики

Product Type 32-bit ARM Cortex-M4 industrial microcontroller
Series XMC4000
Device Family XMC4500
Processor Core ARM Cortex-M4
CPU Word Length 32 bit
Maximum CPU Frequency 120 MHz
Flash Memory 1024 kByte
Flash Organization 1M x 8 bits
Connectivity Ethernet
Напряжение питания 3.3 V
Корпус PG-LQFP-100-11
Число выводов 100 pins
Тип монтажа Surface-mount LQFP

Руководство по цоколевке XMC4500F100K1024AAXQSA1 в корпусе pg-lqfp-100-11

Цоколевка для XMC4500F100K1024AAXQSA1 (корпус pg-lqfp-100-11). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса pg-lqfp-100-11 для XMC4500F100K1024AAXQSA1

Нет подробных данных о распиновке для XMC4500F100K1024AAXQSA1.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

XMC4500F100K1024AAXQSA1 подходит для 6 применениеs: Industrial Ethernet Controllers, Factory Automation Equipment, Connected Sensor Hubs, Building Automation Systems, Industrial Data Acquisition, Industrial Communication Gateways.

🌐

Industrial Ethernet Controllers

The XMC4500F100K1024AAXQSA1 fits industrial Ethernet controllers that combine protocol handling with local real-time control. Its 120 MHz ARM Cortex-M4 core processes network and supervisory tasks, while 1024 kByte of flash stores application firmware and configuration data. Ethernet connectivity is a defined feature of the XMC4500-F100x1024 family. In a controller architecture, the MCU can coordinate sensors, safety interlocks, actuator commands, and status reporting through the Ethernet interface. The 100-pin LQFP package also exposes a broad peripheral complement for board-level integration. Engineers should confirm the exact Ethernet MAC, PHY, isolation, and connector requirements in the manufacturer datasheet before selecting the board topology.

🏭

Factory Automation Equipment

The XMC4500F100K1024AAXQSA1 is suited to factory automation equipment that needs deterministic processing, local program storage, and industrial communications. Its 120 MHz Cortex-M4 core can manage motion commands, machine-state logic, diagnostics, and communication tasks in a unified embedded controller. The 1024 kByte flash capacity provides room for control firmware, lookup data, and configuration parameters without requiring a separate program-memory device. Its Ethernet capability supports connected machine monitoring and supervisory control. For a production design, validate real-time interrupt latency, peripheral multiplexing, and the exact operating-temperature requirements for the selected ordering suffix before releasing the schematic and firmware.

🧩

Connected Sensor Hubs

The XMC4500F100K1024AAXQSA1 can serve as the central processor in a connected sensor hub for industrial and building monitoring. The 120 MHz ARM Cortex-M4 core supports acquisition, filtering, diagnostics, and communication workload, while 1024 kByte of flash provides ample space for embedded firmware and field configuration. Ethernet connectivity allows measurements and equipment status to be aggregated before transmission to supervisory software. Because the XMC4000 family uses a configurable peripheral set, designers can tailor the signal path to the selected sensor types. Check pin multiplexing and analog-peripheral requirements against the 100-pin package table, and place sensitive measurement paths away from Ethernet and switching circuitry.

🏠

Building Automation Systems

The XMC4500F100K1024AAXQSA1 is appropriate for building automation controllers that coordinate connected equipment while retaining local control capability. Its 120 MHz Cortex-M4 processor handles application logic, scheduling, communication, and diagnostic routines, and its 1024 kByte of flash supports firmware plus configuration tables. Ethernet connectivity allows the controller to integrate with supervisory building-management systems. The 100-pin LQFP package provides access to a broad set of I/O and peripheral functions for lamps, HVAC interfaces, sensors, and actuators. Design teams should reserve pins for programming, debug, clocking, reset, and communications, and verify the exact package pin functions before finalizing the PCB footprint and signal assignments.

📟

Industrial Data Acquisition

The XMC4500F100K1024AAXQSA1 fits industrial data-acquisition equipment that must collect local measurements and provide network connectivity. The 120 MHz ARM Cortex-M4 core can execute sampling coordination, signal conditioning support, calibration routines, and data packaging, while the 1024 kByte flash capacity accommodates acquisition firmware and lookup or calibration data. Ethernet connectivity supports transfer of acquired records and status information to a supervisory system. The configurable XMC4000 peripheral architecture allows the design to be tailored around the required acquisition channels. Engineers should verify converter interfaces, timing pins, clocking, and interrupt resources in the package-specific pin table, and assess thermal and power performance at the system operating temperature.

🔧

Industrial Communication Gateways

The XMC4500F100K1024AAXQSA1 can support industrial communication gateways that translate between local equipment interfaces and an Ethernet-connected supervisory network. The 120 MHz Cortex-M4 core provides compute capacity for frame handling, protocol conversion, diagnostics, and device management, while 1024 kByte of flash supports gateway firmware and configuration storage. The XMC4000 family's configurable peripheral set allows communications-oriented signal assignments to be tailored to the installation. For deployment, validate protocol timing, watchdog behavior, bootloader requirements, and recovery after communication faults. The 100-pin LQFP package must be checked against the exact multiplexing table so unused or alternate-function pins are connected or left in accordance with the manufacturer guidance.

Сводка рекомендуемых товаров

XMC4500F100K1024AAXQSA1 Infineon Используется в: Industrial Ethernet Controllers, Factory Automation Equipment, Connected Sensor Hubs, Building Automation Systems, Industrial Data Acquisition, Industrial Communication Gateways XMC4500-F100K1024-AC Related XMC4500 family ordering configuration Используется в: Industrial Ethernet Controllers, Building Automation Systems XMC4500F100K1024ACXQSA1 Infineon Используется в: Factory Automation Equipment, Industrial Data Acquisition XMC4500-F100K1024-AA Related XMC4500 family configuration Используется в: Connected Sensor Hubs XMC4500F100K1024ABXQMA1 Related XMC4500-F100x1024 ordering variant Используется в: Industrial Communication Gateways
What are the key specifications of XMC4500F100K1024AAXQSA1?
The XMC4500F100K1024AAXQSA1 is a 120 MHz ARM Cortex-M4 microcontroller with 1024 kByte of flash, Ethernet connectivity, and a 100-pin PG-LQFP-100-11 package. According to the Infineon XMC4500 manufacturer datasheet, the device belongs to the XMC4500-F100x1024 family and combines a configurable peripheral set with the Cortex-M4 core. Distributor product records also identify the flash organization as 1M by 8 bits.
What is the operating voltage of XMC4500F100K1024AAXQSA1?
The XMC4500F100K1024AAXQSA1 operates from a 3.3 V supply. The manufacturer datasheet is the controlling source for electrical limits, timing, and pin-level operating conditions. When designing the power tree, confirm the exact minimum and maximum operating voltages against the ordering-specific electrical characteristics before selecting regulators, capacitors, and level-shifting components.
Where can I download the XMC4500F100K1024AAXQSA1 datasheet PDF?
The official XMC4500 datasheet PDF is available from Infineon at https://www.infineon.com/assets/row/public/documents/30/49/infineon-xmc4500-datasheet-en.pdf. It covers the XMC4500-F100x1024 family, including ordering designations, electrical and physical characteristics, and supported package pin functions. Use the package pin table for the 100-pin variant when assigning board signals.
Where can I find the XMC4500F100K1024AAXQSA1 pinout?
The XMC4500F100K1024AAXQSA1 pinout is published in the manufacturer XMC4500 datasheet, in the package-specific pin table. The target uses the PG-LQFP-100-11 package, so designers should map each signal against that 100-pin column rather than a pin table for the 144-pin device. Pin multiplexing must also be coordinated with the device configuration used by the development software.
Is XMC4500F100K1024AAXQSA1 suitable for industrial Ethernet control systems?
The XMC4500F100K1024AAXQSA1 is suitable for industrial Ethernet control systems because it combines Ethernet connectivity, a 120 MHz ARM Cortex-M4 core, and 1024 kByte of flash. The manufacturer identifies the XMC4000 family as an industrial microcontroller platform with a configurable peripheral set. Final suitability depends on the required interface standards, environmental limits, and real-time behavior of the complete design.
How much flash memory does XMC4500F100K1024AAXQSA1 contain?
The XMC4500F100K1024AAXQSA1 contains 1024 kByte of flash, equivalent to 1 MB. Distributor product records describe the memory organization as 1M by 8 bits. This capacity allows the device to hold application firmware, configuration parameters, and update logic, although the practical code and data budget still depends on the linker configuration and reserved memory areas.
What is the difference between XMC4500F100K1024AAXQSA1 and XMC4500F100K1024ACXQSA1?
Both XMC4500F100K1024AAXQSA1 and XMC4500F100K1024ACXQSA1 are Infineon XMC4500-F100x1024 Cortex-M4 devices with a 120 MHz core, 1024 kByte of flash, Ethernet, and a 100-pin LQFP package. Their ordering-code suffixes distinguish configuration or qualification variants. Review the manufacturer ordering table and parameter limits for each suffix before treating either device as a substitution.
When should I choose XMC4500F100K1024AAXQSA1 over another XMC4500 variant?
Choose the XMC4500F100K1024AAXQSA1 when the design specifically calls for the AA ordering variant with a 120 MHz Cortex-M4 core, 1024 kByte of flash, Ethernet, and a 100-pin LQFP footprint. If a different ordering suffix changes temperature range, qualification, or another limit, select that variant only after confirming its exact ordering table. The footprint alone does not prove functional equivalence.
What is the best drop-in replacement for XMC4500F100K1024AAXQSA1?
The closest drop-in candidate is the Infineon XMC4500F100K1024ACXQSA1 because it retains the XMC4500-F100x1024 family, 120 MHz Cortex-M4 core, 1024 kByte of flash, Ethernet, and 100-pin package. A true drop-in decision still requires checking every electrical limit, pin configuration, qualification attribute, and software-support requirement for the selected suffix in the manufacturer ordering information.
Can XMC4500F100K1024ACXQSA1 replace XMC4500F100K1024AAXQSA1?
The XMC4500F100K1024ACXQSA1 can be considered for a replacement review because its documented core frequency, flash capacity, Ethernet feature, and 100-pin package align with the target. It should not be treated as an unconditional replacement until the ordering-code differences have been verified against the manufacturer datasheet. Confirm temperature, qualification, lifecycle, and peripheral-configuration requirements before schematic release.
What can replace XMC4500F100K1024AAXQSA1 in a pin-compatible design?
XMC4500F100K1024ACXQSA1 is the principal pin-compatible candidate identified for the XMC4500F100K1024AAXQSA1 because both use the 100-pin XMC4500-F100x1024 configuration and share the 120 MHz Cortex-M4 and 1024 kByte flash ratings. Use the manufacturer package pin table and ordering table to verify signal multiplexing and qualification. Do not substitute a different package or pin count without a PCB redesign.
Where can I buy XMC4500F100K1024AAXQSA1 online?
Use the Request a Quote form on this page to request XMC4500F100K1024AAXQSA1 availability, current lead time, and order quantities. The manufacturer product page and datasheet provide the technical identification, including the 120 MHz Cortex-M4 core, 1024 kByte flash, Ethernet, and 100-pin package. The quote form is the appropriate route for a product-specific commercial request.
What is the price of XMC4500F100K1024AAXQSA1?
The current commercial terms for XMC4500F100K1024AAXQSA1 are handled through the Request a Quote form on this page. Submit the required quantity, package preference, and target delivery location so a product-specific response can be prepared. The visible technical page does not publish a static unit-price figure that may become outdated or fail to match the requested configuration.
What is the lead time and stock status for XMC4500F100K1024AAXQSA1?
Request the current stock status, lead time, and minimum order quantity for XMC4500F100K1024AAXQSA1 through the Request a Quote form on this page. Because availability can change with order volume and supply conditions, a product-specific quotation is more reliable than a generic stock statement. Include the required quantity and intended delivery schedule with the request.
Is XMC4500F100K1024AAXQSA1 RoHS and REACH compliant?
The XMC4500F100K1024AAXQSA1 is an industrial ARM Cortex-M4 microcontroller with a 3.3 V supply, 1024 kByte flash, Ethernet, and a 100-pin LQFP package. RoHS, REACH, lead-free, halogen-free, and conflict-mineral status should be confirmed from the current manufacturer product declaration or material-compliance documentation before a regulated production release. The technical datasheet alone does not establish every compliance declaration.

Справочные инженерные данные для XMC4500F100K1024AAXQSA1 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the XMC4500F100K1024AAXQSA1 when the bill of materials specifically requires the AA ordering configuration of the XMC4500-F100x1024 family. It provides a 120 MHz ARM Cortex-M4 core, 1024 kByte of flash, Ethernet connectivity, and a 100-pin LQFP package for industrial embedded designs. Review XMC4500F100K1024ACXQSA1 when that ordering variant satisfies the required qualification and temperature limits. Consider XMC4500F100K1024ABXQMA1 only after its full electrical and software configuration is confirmed. The shorter XMC4500-F100K1024-AA and XMC4500-F100K1024-AC designations are useful family references, but the complete ordering suffix must be resolved before procurement or PCB release. None of these candidates should replace the target solely on package or core-frequency similarity; verify pin multiplexing, peripheral settings, electrical limits, lifecycle status, and firmware support as one complete decision.

Сравнение с аналогами

Параметр Этот товар XMC4500F100K1024ACXQSA1 XMC4500F100K1024ABXQMA1 XMC4500-F100K1024-AA XMC4500-F100K1024-AC
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package PG-LQFP-100-11 PG-LQFP-100-11 PG-LQFP-100-11 PG-LQFP-100-11 PG-LQFP-100-11
Processor Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 1024 kByte 1024 kByte 1024 kByte 1024 kByte 1024 kByte
CPU Word Length 32 bit 32 bit 32 bit 32 bit 32 bit
Ordering Designation XMC4500F100K1024AAXQSA1 XMC4500F100K1024ACXQSA1 XMC4500F100K1024ABXQMA1 XMC4500-F100K1024-AA XMC4500-F100K1024-AC

Ключевые отличия

  • Exact AA ordering configuration (против XMC4500F100K1024ACXQSA1)
  • Full manufacturer ordering code (против XMC4500-F100K1024-AC)
  • Industrial Ethernet integration (против XMC4500F100K1024ABXQMA1)

Заметки по проектированию

Assign every signal from the 100-pin package column in the manufacturer datasheet before schematic release. The XMC4500 uses multiplexed functions, so a pin that appears to be a general-purpose I/O may have dedicated alternate functions. Preserve the PG-LQFP-100-11 land pattern, provide the required power, ground, clock, reset, and programming connections, and cross-check every unused pin against the device-specific guidance rather than another XMC4500 package.

Design the 3.3 V supply path for both steady-state and transient requirements. Place the bulk and high-frequency decoupling network close to the relevant supply pins, minimize loop area, and verify the regulator's transient response against the XMC4500 electrical characteristics. Because the LQFP package has numerous ground-related connections, use an uninterrupted ground plane and adequate via distribution while maintaining the manufacturer's thermal and copper recommendations.

Separate Ethernet and other communication signals from sensitive analog or measurement traces, and provide a continuous reference plane beneath controlled-impedance routes. Keep switching nodes, high-current return paths, and clock sources away from precision acquisition circuitry. Route oscillator and debug connections using the shortest practical paths, observe return paths beneath the device, and perform signal-integrity and EMC checks on the final board rather than relying only on schematic connectivity.

Do not approve a substitute solely because its product title contains the same F100K1024 family identifier. Compare the complete ordering suffix, pin multiplexing, electrical limits, qualification attributes, software-support level, and lifecycle status for the exact alternative. A footprint-compatible package establishes mechanical compatibility, but it does not by itself prove that firmware, peripheral configuration, and production qualification requirements are unchanged.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral declaration was identified for the exact ordering code. Confirm current compliance documents with Infineon before production release.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

XMC4500F100K1024AAXQSA1 datasheet XMC4500F100K1024AAXQSA1 specifications XMC4500F100K1024AAXQSA1 pinout XMC4500F100K1024AAXQSA1 datasheet pdf XMC4500F100K1024AAXQSA1 equivalent XMC4500F100K1024AAXQSA1 replacement XMC4500F100K1024AAXQSA1 cross reference XMC4500F100K1024AAXQSA1 vs XMC4500F100K1024ACXQSA1 Infineon XMC4500F100K1024AAXQSA1 XMC4500F100K1024AAXQSA1 price XMC4500F100K1024AAXQSA1 stock XMC4500F100K1024AAXQSA1 LQFP-100 XMC4500F100K1024AAXQSA1 industrial Ethernet XMC4500F100K1024AAXQSA1 programming what is XMC4500F100K1024AAXQSA1

Связанные компоненты & термины

Infineon Technologies XMC4500F100K1024AAXQSA1 XMC4500F100K1024ACXQSA1 XMC4500F100K1024ABXQMA1 XMC4500-F100K1024-AA XMC4500-F100K1024-AC ARM Cortex-M4 32-bit microcontroller embedded microcontroller industrial microcontroller XMC4000 XMC4500 Ethernet 1024 kByte flash 120 MHz PG-LQFP-100-11 LQFP surface-mount package 3.3 V configurable peripheral set industrial automation factory automation building automation industrial data acquisition real-time control
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ