XMC4500F100K1024AAXQSA1 - 120MHz Cortex-M4 | Infineon
料号: XMC4500F100K1024AAXQSA1 ✓ 量产中XMC4500F100K1024AAXQSA1 概述
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The XMC4500 belongs to the XMC4000 family of 32-bit ARM microcontrollers. Its hierarchy is ARM Cortex-M4 microcontroller, embedded processor, and programmable control IC. The XMC4000 family combines the ARM Cortex-M4 core with a configurable peripheral set intended to support application-specific industrial control systems.
Three headline specifications define the XMC4500F100K1024AAXQSA1: a 120 MHz Cortex-M4 core, 1024 kByte of flash memory, and Ethernet connectivity. The flash is organized as 1 MB, or 1M by 8 bits, according to distributor product listings. These characteristics make the device suitable for industrial embedded systems that require deterministic control processing, substantial local program storage, and network communication.
The part belongs to the XMC4500-F100x1024 device group, whose manufacturer datasheet covers ordering designations, electrical characteristics, physical characteristics, and supported peripheral functions. The manufacturer describes the XMC4000 platform as combining an ARM Cortex-M4 core with a configurable peripheral set. That architecture allows designers to tailor the controller around particular measurement, communication, and industrial-control requirements rather than relying on a fixed peripheral arrangement.
Typical uses include industrial Ethernet equipment, factory automation controllers, connected sensor hubs, building automation equipment, and industrial data-acquisition systems. The Ethernet interface supports connected control architectures, while the 120 MHz Cortex-M4 processing capability is suited to real-time supervisory and control tasks. The 1024 kByte flash also provides practical space for application firmware, configuration data, and field-upgrade handling within a single embedded device.
The 100-pin LQFP package provides a substantial pin count for mixed-signal and peripheral-heavy industrial designs. Board layout should preserve the pin-oriented package geometry and route sensitive analog or communications signals away from high-current switching paths. Firmware selection and peripheral configuration should be validated against the exact ordering code and pin multiplexing table in the manufacturer datasheet before production release.
This page combines the exact ordering information, package details, memory configuration, processor capability, and Ethernet feature with application guidance, engineering considerations, and a focused drop-in comparison. It is intended to help engineers determine whether the XMC4500F100K1024AAXQSA1 fits an industrial embedded design before beginning PCB implementation.
直接替换替代料: XMC4500F100K1024AAXQSA1 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XMC4500F100K1024AAXQSA1 (相同外形与封装尺寸) ——差异在于 Mounting Type, Package.
XMC4500F100K1024ACXQSA1
✅ 直接替换联系询价
查看数据手册 →XMC4500F100K1024ABXQMA1
✅ 直接替换📋 参考替代料(不在目录中)
XMC4500-F100K1024-AA
✅ 直接替换📋 参考替代料(不在目录中)
XMC4500-F100K1024-AC
✅ 直接替换📋 参考替代料(不在目录中)
XMC4500F100K1024AAXQSA1 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M4 industrial microcontroller |
| Series | XMC4000 |
| Device Family | XMC4500 |
| Processor Core | ARM Cortex-M4 |
| CPU Word Length | 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 1024 kByte |
| Flash Organization | 1M x 8 bits |
| Connectivity | Ethernet |
| 电源电压 | 3.3 V |
| 封装 | PG-LQFP-100-11 |
| 引脚数量 | 100 pins |
| 安装类型 | Surface-mount LQFP |
XMC4500F100K1024AAXQSA1 pg-lqfp-100-11 引脚配置指南
XMC4500F100K1024AAXQSA1(pg-lqfp-100-11 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XMC4500F100K1024AAXQSA1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XMC4500F100K1024AAXQSA1 适用于 6 应用s: Industrial Ethernet Controllers, Factory Automation Equipment, Connected Sensor Hubs, Building Automation Systems, Industrial Data Acquisition, Industrial Communication Gateways.
Industrial Ethernet Controllers
The XMC4500F100K1024AAXQSA1 fits industrial Ethernet controllers that combine protocol handling with local real-time control. Its 120 MHz ARM Cortex-M4 core processes network and supervisory tasks, while 1024 kByte of flash stores application firmware and configuration data. Ethernet connectivity is a defined feature of the XMC4500-F100x1024 family. In a controller architecture, the MCU can coordinate sensors, safety interlocks, actuator commands, and status reporting through the Ethernet interface. The 100-pin LQFP package also exposes a broad peripheral complement for board-level integration. Engineers should confirm the exact Ethernet MAC, PHY, isolation, and connector requirements in the manufacturer datasheet before selecting the board topology.
推荐
Factory Automation Equipment
The XMC4500F100K1024AAXQSA1 is suited to factory automation equipment that needs deterministic processing, local program storage, and industrial communications. Its 120 MHz Cortex-M4 core can manage motion commands, machine-state logic, diagnostics, and communication tasks in a unified embedded controller. The 1024 kByte flash capacity provides room for control firmware, lookup data, and configuration parameters without requiring a separate program-memory device. Its Ethernet capability supports connected machine monitoring and supervisory control. For a production design, validate real-time interrupt latency, peripheral multiplexing, and the exact operating-temperature requirements for the selected ordering suffix before releasing the schematic and firmware.
推荐
Connected Sensor Hubs
The XMC4500F100K1024AAXQSA1 can serve as the central processor in a connected sensor hub for industrial and building monitoring. The 120 MHz ARM Cortex-M4 core supports acquisition, filtering, diagnostics, and communication workload, while 1024 kByte of flash provides ample space for embedded firmware and field configuration. Ethernet connectivity allows measurements and equipment status to be aggregated before transmission to supervisory software. Because the XMC4000 family uses a configurable peripheral set, designers can tailor the signal path to the selected sensor types. Check pin multiplexing and analog-peripheral requirements against the 100-pin package table, and place sensitive measurement paths away from Ethernet and switching circuitry.
推荐
Building Automation Systems
The XMC4500F100K1024AAXQSA1 is appropriate for building automation controllers that coordinate connected equipment while retaining local control capability. Its 120 MHz Cortex-M4 processor handles application logic, scheduling, communication, and diagnostic routines, and its 1024 kByte of flash supports firmware plus configuration tables. Ethernet connectivity allows the controller to integrate with supervisory building-management systems. The 100-pin LQFP package provides access to a broad set of I/O and peripheral functions for lamps, HVAC interfaces, sensors, and actuators. Design teams should reserve pins for programming, debug, clocking, reset, and communications, and verify the exact package pin functions before finalizing the PCB footprint and signal assignments.
推荐
Industrial Data Acquisition
The XMC4500F100K1024AAXQSA1 fits industrial data-acquisition equipment that must collect local measurements and provide network connectivity. The 120 MHz ARM Cortex-M4 core can execute sampling coordination, signal conditioning support, calibration routines, and data packaging, while the 1024 kByte flash capacity accommodates acquisition firmware and lookup or calibration data. Ethernet connectivity supports transfer of acquired records and status information to a supervisory system. The configurable XMC4000 peripheral architecture allows the design to be tailored around the required acquisition channels. Engineers should verify converter interfaces, timing pins, clocking, and interrupt resources in the package-specific pin table, and assess thermal and power performance at the system operating temperature.
推荐
Industrial Communication Gateways
The XMC4500F100K1024AAXQSA1 can support industrial communication gateways that translate between local equipment interfaces and an Ethernet-connected supervisory network. The 120 MHz Cortex-M4 core provides compute capacity for frame handling, protocol conversion, diagnostics, and device management, while 1024 kByte of flash supports gateway firmware and configuration storage. The XMC4000 family's configurable peripheral set allows communications-oriented signal assignments to be tailored to the installation. For deployment, validate protocol timing, watchdog behavior, bootloader requirements, and recovery after communication faults. The 100-pin LQFP package must be checked against the exact multiplexing table so unused or alternate-function pins are connected or left in accordance with the manufacturer guidance.
推荐
推荐产品汇总
工程参考数据: XMC4500F100K1024AAXQSA1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XMC4500F100K1024ACXQSA1 | XMC4500F100K1024ABXQMA1 | XMC4500-F100K1024-AA | XMC4500-F100K1024-AC |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1024 kByte | 1024 kByte | 1024 kByte | 1024 kByte | 1024 kByte |
| CPU Word Length | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit |
| Ordering Designation | XMC4500F100K1024AAXQSA1 | XMC4500F100K1024ACXQSA1 | XMC4500F100K1024ABXQMA1 | XMC4500-F100K1024-AA | XMC4500-F100K1024-AC |
关键差异点
- Exact AA ordering configuration (对比 XMC4500F100K1024ACXQSA1)
- Full manufacturer ordering code (对比 XMC4500-F100K1024-AC)
- Industrial Ethernet integration (对比 XMC4500F100K1024ABXQMA1)
设计说明
Assign every signal from the 100-pin package column in the manufacturer datasheet before schematic release. The XMC4500 uses multiplexed functions, so a pin that appears to be a general-purpose I/O may have dedicated alternate functions. Preserve the PG-LQFP-100-11 land pattern, provide the required power, ground, clock, reset, and programming connections, and cross-check every unused pin against the device-specific guidance rather than another XMC4500 package.
Design the 3.3 V supply path for both steady-state and transient requirements. Place the bulk and high-frequency decoupling network close to the relevant supply pins, minimize loop area, and verify the regulator's transient response against the XMC4500 electrical characteristics. Because the LQFP package has numerous ground-related connections, use an uninterrupted ground plane and adequate via distribution while maintaining the manufacturer's thermal and copper recommendations.
Separate Ethernet and other communication signals from sensitive analog or measurement traces, and provide a continuous reference plane beneath controlled-impedance routes. Keep switching nodes, high-current return paths, and clock sources away from precision acquisition circuitry. Route oscillator and debug connections using the shortest practical paths, observe return paths beneath the device, and perform signal-integrity and EMC checks on the final board rather than relying only on schematic connectivity.
Do not approve a substitute solely because its product title contains the same F100K1024 family identifier. Compare the complete ordering suffix, pin multiplexing, electrical limits, qualification attributes, software-support level, and lifecycle status for the exact alternative. A footprint-compatible package establishes mechanical compatibility, but it does not by itself prove that firmware, peripheral configuration, and production qualification requirements are unchanged.
合规信息
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral declaration was identified for the exact ordering code. Confirm current compliance documents with Infineon before production release.