Mga Produkto (44,000+)

WM8533ECSN/R - 24-Bit 192kHz Stereo DAC | Cirrus Logic
WM8533ECSN/R

WM8533ECSN/R - 24-Bit 192kHz Stereo DAC | Cirrus Logic

Cirrus Logic WM8533ECSN/R is a 24-bit, 192kHz stereo audio digital-to-analog converter with 2Vrms ground-referenced line output, I2C and SPI control interfaces, and a 20-WCSP package measuring 1.84 mm by 1.77 mm. The verified product data identifies it as a two-channel audio DAC suitable for digital audio equipment requiring a compact, high-resolution conversion stage. An audio DAC is a data converter that transforms digital audio samples into analog voltage signals. Within the broader hierarchy of ADC/DAC converters, data converters, and integrated circuits, a stereo DAC supports two independent analog output channels. The WM8533ECSN/R operates at up to 192kHz and accepts 24-bit audio data, making its digital audio interface suitable for high-resolution consumer and embedded audio systems. Key verified features include 24-bit resolution, a maximum sample rate of 192kHz, stereo operation, 2Vrms ground-referenced line outputs, and configurable I2C or SPI control. The compact 20-WCSP package is intended for space-constrained designs where a conventional leaded package or larger multi-pin surface-mount package would be inconvenient. Exact device dimensions, pin assignments, clock requirements, supply voltages, and output topology details require confirmation from the manufacturer datasheet. The converter can sit at the output of a digital audio pipeline, receiving serial audio data from a USB interface, audio processor, Bluetooth receiver, or digital transport. I2C is useful for compact control buses, while SPI provides an alternative digital control path. The verified 2Vrms ground-referenced output description indicates that the analog stage is intended for line-level audio rather than direct headphone drive. Typical uses include premium portable audio products, digital media equipment, active speakers, audio docking systems, and embedded playback platforms. In each case, the 24-bit and 192kHz capabilities allow high-resolution source material to be represented, although actual signal fidelity also depends on clocking, analog layout, power quality, output filtering, and the surrounding signal chain. Designers should verify the complete pinout and reference circuit directly against the manufacturer datasheet before PCB layout. The 1.84 mm by 1.77 mm WCSP requires fine-pitch assembly, and the I2C and SPI interface pins, analog outputs, supplies, and ground connections must be routed according to the documented reference layout. This page consolidates verified distributor descriptions, package information, interface details, and selection guidance while clearly identifying parameters that still require datasheet verification. It also records that no verified pin-to-pin replacement candidates were found, avoiding unsupported substitution claims.

RFQ Kontak
WM8569SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8569SEDS/RV

WM8569SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8569SEDS/RV is a 24-bit stereo audio codec with two ADCs, two DACs, an SPI digital audio interface, and a maximum sampling rate of 192 kSPS. The device is packaged in a 28-pin SSOP measuring 5.30 mm wide and is supplied in tape-and-reel packaging. It combines analog-to-digital conversion, digital-to-analog conversion, and onboard volume control in one compact interface IC. An audio codec is a mixed-signal integrated circuit that converts digital audio samples into analog signals and analog sound into digital data. Within the signal-chain hierarchy, a stereo codec belongs to the interface IC and audio-codec class of broader integrated circuits. Its digital interface connects to a host processor, while its analog inputs and outputs provide the physical connection to microphones, line-level equipment, amplifiers, speakers, and audio processing circuits. The WM8569SEDS/RV supports 24-bit processing at rates up to 192 kSPS. According to the Wolfson Microelectronics manufacturer datasheet, the ADC signal-to-noise ratio is typically 100 dB and the DAC signal-to-noise ratio is typically 103 dB. The codec includes two ADC channels, two DAC channels, stereo volume control, and an SPI-compatible digital interface. These characteristics make it suitable for consumer audio, communications, and embedded audio systems requiring more than basic playback capability. The device combines high-resolution conversion with integrated level control, reducing the need for separate digital volume-control circuitry. Its 192 kSPS maximum rate supports high-resolution digital audio, while the SPI interface provides a compact connection to microcontrollers, digital signal processors, and application-specific processors. The 5.30 mm-wide 28-pin SSOP also offers a lower-area option than many larger leaded or high-pin-count audio packages. Typical uses include digital active loudspeakers, personal audio equipment, communications terminals, USB or portable audio systems, and embedded playback platforms. In a typical signal path, digital samples enter through SPI, pass through the DAC and volume-control functions, and leave through the stereo analog outputs. An ADC path can simultaneously capture two analog channels for monitoring, voice processing, or digital capture. PCB design should preserve analog and digital signal separation, provide short return paths for analog outputs, and place decoupling and input-filter components close to their associated pins. The analog and digital ground strategy, supported passive values, and supported clock configuration should be taken directly from the manufacturer datasheet and reference circuit rather than inferred from generic codec layouts. This product page combines the manufacturer-level conversion specifications, package information, pricing workflow, drop-in assessment, and practical integration guidance. It also distinguishes genuine replacement options from package-only lookalikes and identifies which board-level decisions still require confirmation from the full datasheet.

RFQ Kontak
WM8569SEDS/V - 24-Bit 192kHz Stereo Audio Codec | Cirrus Logic
WM8569SEDS/V

WM8569SEDS/V - 24-Bit 192kHz Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8569SEDS/V is a stereo audio codec with a 24-bit digital audio interface, 192 kHz maximum sampling rate, and integrated analog-to-digital and digital-to-analog converters. The device is specified in a 28-pin SSOP package and uses an SPI-compatible control interface for register configuration. Its stereo ADC and DAC architecture supports separate record and playback clocking, allowing different sampling rates for capture and playback. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog audio signals. Within the signal-chain hierarchy, the WM8569SEDS/V combines an audio ADC, a stereo multi-bit sigma-delta DAC, digital interpolation filters, volume control, and a digital control interface. This integration allows a host processor to play and record stereo audio through one compact device instead of using separate converter packages. The principal performance parameters are 24-bit resolution, sampling rates from 8 kHz to 192 kHz, two ADC channels, and two DAC channels. Digital audio input word lengths can be configured from 16 to 24 bits. The separate ADC and DAC clocking architecture is particularly useful in consumer equipment where the system clock supplied to the capture and playback paths is not identical. The WM8569 uses multi-bit sigma-delta conversion for its stereo DAC, with oversampling and digital interpolation filtering in the signal path. The device also includes volume control and is identified by the manufacturer as suitable for DVD, PVR, LCD-TV, and automotive audio systems. Digital configuration is performed through a serial control interface, allowing software-defined gain, routing, and operating-mode settings. Typical deployments include DVD and personal-video-recorder audio paths, LCD television sound systems, automotive head-unit audio, and other multimedia products that require simultaneous stereo recording and playback. Independent ADC and DAC clocks are valuable when the source device records at a different rate from the playback stream. The 192 kHz capability also supports high-resolution audio processing pipelines. When laying out the circuit, treat analog input, analog output, digital interface, and supply connections as separate functional groups. Follow the pin-description table and recommended application circuit in the manufacturer datasheet for decoupling, grounding, and analog routing. Confirm the digital audio word length, master-clock configuration, and serial-interface mode in firmware before enabling the playback and capture paths.

RFQ Kontak
WM8580AGEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8580AGEFT/V

WM8580AGEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8580AGEFT/V is a multichannel stereo audio codec with an integrated S/PDIF transceiver, a 24-bit serial interface, and operation to 192 kSPS. It is packaged in a 48-pin TQFP measuring 7 x 7 mm. The device supports stereo audio conversion, one A/D converter, and digital audio connections for consumer and industrial audio systems. An audio codec is a mixed-signal semiconductor that converts between analog audio signals and digital data. The WM8580AGEFT/V belongs to the audio codec hierarchy, where codec functionality includes signal conversion, filtering, sampling, and digital interface control. Its S/PDIF capability supports digital consumer-audio formats, while the serial interface provides a digital path between the codec and a host processor or audio engine. Principal features include a 24-bit serial data format, support for sampling rates up to 192 kSPS, and an operating temperature range from -40°C to +85°C. The integrated S/PDIF transceiver supports systems that require digital audio transmission, and the listed operating supply current is 25 mA. The 48-TQFP arrangement provides all required signal, power, control, and ground connections in a compact surface-mount footprint. The WM8580AGEFT/V combines analog-to-digital conversion with digital audio interface functions in one device. According to the manufacturer datasheet, the codec includes one A/D converter and is designed for multichannel audio conversion. The 192 kSPS capability allows it to support high-resolution audio streams, while the 24-bit interface provides sufficient resolution for modern digital audio processing. Exact converter signal-to-noise ratio, distortion, clocking, and digital timing limits must be taken from the manufacturer datasheet before finalizing an audio design. Typical uses include digital audio equipment, multimedia systems, active speaker products, consumer electronics, and embedded audio platforms. In each case, the codec can convert an analog audio input to digital data or route digital audio through its serial and S/PDIF interfaces. Hosts using the codec must supply the required clocking, configure the operating mode, and implement the appropriate software or firmware controls. PCB implementation should prioritize short, quiet analog and digital return paths and place decoupling capacitors close to the device power pins. Because this mixed-signal component combines 24-bit audio conversion with digital interfaces, routing should minimize coupling between sensitive analog nodes and high-speed digital lines. Ground and power-plane geometry should follow the pinout and layout guidance in the manufacturer datasheet. This product page summarizes the codec's confirmed resolution, sampling rate, channel configuration, package, temperature range, and digital-interface characteristics. It also organizes replacement considerations, application guidance, comparison parameters, and practical PCB recommendations for engineers evaluating the WM8580AGEFT/V.

RFQ Kontak
WM8580GEFT/RV - 6-Channel Audio Codec | Cirrus Logic
WM8580GEFT/RV

WM8580GEFT/RV - 6-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8580GEFT/RV is a 6-channel audio codec with an integrated S/PDIF transceiver, supporting 24-bit I2S audio and sampling rates from 8 kHz to 192 kHz. It operates from 2.7 V to 5.5 V and is housed in a 48-pin TQFP package measuring 7 mm by 7 mm. The device also provides an integrated phase-locked loop, digital gain control, mute control, and link-status monitoring. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog sound into a digital stream. The WM8580 belongs to the audio codec hierarchy within interface ICs, combining multichannel DAC and ADC functions, digital audio interfaces, clock recovery, and S/PDIF transmission or reception. This integration lets a system handle multiple playback and recording paths without implementing each converter as a separate discrete device. Principal features include six-channel codec operation, 24-bit I2S resolution, a broad 8 kHz-to-192 kHz sampling-rate range, and support for I2C, SPI, I2S, and S/PDIF connections. Its integrated phase-locked loop supports synchronization of digital audio data, while link-status monitoring allows software to determine whether the digital link is operating correctly. These functions are useful in home theater, automotive audiovisual, DVD, and surround-sound systems. The WM8580GEFT/RV supports digital supply operation from 2.7 V to 3.6 V and analog supply operation from 2.7 V to 5.5 V. That separation permits the digital interface and analog converter sections to use appropriate rail levels. The 48-pin TQFP construction provides external routing access for analog, digital, clock, and control signals while supporting conventional surface-mount assembly. Typical uses include home hi-fi receivers, DVD player audio paths, surround-sound processors, automotive head units, and other audiovisual equipment requiring multiple analog channels plus S/PDIF connectivity. The integrated S/PDIF transceiver is especially useful when a design must pass digital audio between the codec, an amplifier, and external source equipment. PCB design should keep analog and digital return currents separated and place decoupling capacitors close to the relevant supply pins. Confirm the clock topology, supported master or slave mode, and signal levels against the manufacturer datasheet before laying out the digital interface. The 7 mm by 7 mm TQFP footprint also requires adequate assembly clearance and thermal copper for reliable production handling. This product record combines the WM8580GEFT/RV device identity, electrical and interface characteristics, sourcing information, comparison guidance, and practical integration considerations in one engineering-focused reference.

RFQ Kontak
WM8580GEFT/V - Multichannel Audio Codec | Cirrus Logic
WM8580GEFT/V

WM8580GEFT/V - Multichannel Audio Codec | Cirrus Logic

The Cirrus Logic WM8580GEFT/V is a multichannel audio codec with an integrated S/PDIF transceiver, offered in a 48-pin TQFP package measuring 7 x 7 mm. The device accepts a 2.7 V to 5.5 V analog supply and a 2.7 V to 3.6 V digital supply, and its specified operating-temperature range is -40 °C to +85 °C. It is designed for multichannel consumer, automotive, home-theater, and audiovisual equipment. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog audio into digital data. The WM8580 belongs to the broader hierarchy of audio codec, audio interface IC, interface IC, and integrated circuit. Its integrated S/PDIF transceiver adds digital-audio transmission capability, allowing the codec to support digital audio links alongside its analog audio conversion functions. The WM8580GEFT/V combines a multichannel audio codec with S/PDIF transmit and receive capability in one package. Its analog and digital supply domains accept different voltage ranges, supporting integration with equipment that separates analog audio rails from low-voltage digital logic rails. The 48-TQFP surface-mount package provides 48 external connections for digital audio, analog audio, power, control, and supporting functions. This component is intended for DVD, surround-sound processing, home-audio, automotive, and related audiovisual systems. The manufacturer datasheet describes the WM8580 family as a multichannel codec with S/PDIF transceiver and identifies applications including DVD and surround-sound processing equipment for home hi-fi, automotive, and other audiovisual products. Integrating the codec and digital interface can reduce the number of separate signal-chain devices required in an audio subsystem. Typical deployments include multichannel home-theater receivers, DVD and surround-sound processors, automotive head units, digital-audio source equipment, and other consumer audiovisual products. The analog supply range reaches 5.5 V, while the digital supply range reaches 3.6 V, which permits use in both legacy and modern low-voltage digital audio architectures when the remaining interface requirements are satisfied. PCB design should preserve clean analog and digital return paths, place decoupling capacitors close to their associated supply pins, and route S/PDIF signals away from noisy analog and switching-power sections. Before finalizing a layout, use the manufacturer pin-description table and typical application circuit in the WM8580 datasheet to assign every signal and define the power and ground connections correctly. This page combines package, electrical, environmental, sourcing, and drop-in replacement information with practical design guidance. It also identifies the limits of the available cross-reference results so engineers can distinguish documented package compatibility from an unverified functional substitution before changing an existing PCB.

RFQ Kontak
WM8581AGEFT/V - 8-Channel 24-Bit Audio Codec | Cirrus Logic
WM8581AGEFT/V

WM8581AGEFT/V - 8-Channel 24-Bit Audio Codec | Cirrus Logic

The Cirrus Logic WM8581AGEFT/V is an 8-channel, 24-bit audio codec with an integrated S/PDIF transceiver, one ADC, four DACs, and a 48-TQFP surface-mount package measuring 7 mm by 7 mm. Its analog supply accepts 2.7 V to 5.5 V, while its digital supply accepts 2.7 V to 3.6 V. The device supports an operating temperature range of -40 °C to 85 °C. An audio codec is a mixed-signal interface IC that converts between analog audio signals and digital audio data. The WM8581 belongs to the broader codec, audio interface, and interface IC hierarchy. It integrates analog-to-digital and digital-to-analog conversion functions with digital audio interfaces, allowing an audiovisual system to process multiple audio channels while limiting the number of separate converters and interface components required on the printed circuit board. The WM8581 provides a 24-bit audio interface and eight-channel codec capability, with one ADC and four DACs identified in the product documentation. Its integrated S/PDIF transceiver provides a digital audio interface for consumer electronics, automotive audio, home hi-fi, DVD equipment, and surround-sound processing. Separate analog and digital supply ranges support systems using different rail voltages, while the 2.7 V minimum supply operation accommodates low-voltage portable and embedded systems. The part combines several signal-processing blocks in one 48-lead TQFP device. One ADC serves analog input conversion, four DACs support multichannel analog output, and the S/PDIF block handles digital transmission or reception. The 24-bit interface format represents the digital audio word length, while the eight-channel description reflects the codec's multichannel organization. Exact sampling rates, dynamic range, clock requirements, and digital-interface formats must be confirmed in the manufacturer datasheet before finalizing a system design. Typical uses include home-theater and DVD audio paths, surround-sound processors, automotive infotainment systems, digital active speakers, AV receivers, and other equipment requiring both analog audio conversion and S/PDIF connectivity. The integrated S/PDIF transceiver can reduce the need for a separate digital audio interface transceiver when the board architecture already uses this codec for conversion. Layout is critical because the TQFP device combines sensitive analog inputs and outputs with high-speed digital interfaces. Place decoupling capacitors close to the relevant supply pins, return analog and digital grounds carefully, and route clock, data, and S/PDIF signals away from sensitive analog inputs. Confirm the exposed-pad and thermal-layout requirements in the package drawing before fabrication. This product page combines device specifications, sourcing guidance, application analysis, and design-focused information for engineers evaluating the WM8581AGEFT/V. The comparison material also distinguishes confirmed drop-in candidates from alternatives that require functional or package-level redesign.

RFQ Kontak
WM8594SEFT/RV - 24-Bit 192kHz Audio Codec | Cirrus Logic
WM8594SEFT/RV

WM8594SEFT/RV - 24-Bit 192kHz Audio Codec | Cirrus Logic

The Cirrus Logic WM8594SEFT/RV is a 24-bit, 192 kHz multichannel audio codec with one analog-to-digital converter, two digital-to-analog converters, 2 Vrms output capability, and a 48-pin TQFP surface-mount package. It combines an audio interface and conversion functions for systems that require both digital audio input and stereo analog output. An audio codec is an interface IC that converts digital audio data into analog signals and analog audio into digital data. In the broader semiconductor hierarchy, it belongs to the audio interface and converter family, connecting an audio signal chain to a digital processor, interface, or control system. The WM8594SEFT/RV supports 24-bit resolution, making it appropriate for consumer audio, communication, and embedded audio systems where multi-channel conversion and serial digital audio connectivity are required. Key features include one ADC, two DAC channels, 24-bit data resolution, operation up to 192 kHz, and a 2 Vrms analog output level. The 48-pin TQFP package provides 48 external connections for digital audio, analog inputs and outputs, control interfaces, clocks, and power connections. Its surface-mount construction supports compact, automated electronic assemblies while offering more I/O than a compact surface-mount device such as an SOIC-8. The WM8594SEFT/RV combines conversion and interface functions in one device, reducing the number of separate signal-chain components needed for an audio subsystem. The two DAC outputs support analog playback, while the ADC channel supports analog capture or monitoring. The 192 kHz capability accommodates high-rate audio processing, and the 24-bit word length provides 16.8 million discrete amplitude levels per channel. Typical uses include multichannel consumer audio equipment, embedded audio systems, instrumentation, signal synthesis, control-loop audio monitoring, and digital sound processing. Its multi-channel architecture is useful where playback and recording functions coexist, while the TQFP package offers adequate routing flexibility for mixed-signal boards. Designers should follow the pin-description and application-circuit tables in the Cirrus Logic device documentation when assigning tracks, grounding analog and digital sections, and selecting bypass capacitors. Clocking, digital interface configuration, analog signal levels, and power sequencing must be validated together because incorrect routing or grounding can degrade audio performance even when the nominal sample rate and resolution are supported. This page consolidates the confirmed converter configuration, package information, sourcing guidance, application context, and verified drop-in cross-reference information into a practical engineering reference for audio-codec design, PCB implementation, and component sourcing.

RFQ Kontak
WM8594SEFT/V - 24-Bit 192kHz Audio Codec | Cirrus Logic
WM8594SEFT/V

WM8594SEFT/V - 24-Bit 192kHz Audio Codec | Cirrus Logic

Cirrus Logic WM8594SEFT/V is a high-performance 24-bit, 192kHz, multi-channel audio codec with flexible analog input and output selection, digital and analog volume control, and support for 2Vrms signals. The device is packaged in a 48-pin TQFP measuring 7mm by 7mm, making it suitable for compact consumer, communications, and multimedia audio systems. An audio codec is an interface IC that converts between analog audio signals and a digital audio data stream. Within the product hierarchy, a codec combines an analog-to-digital converter, digital-to-analog converter, routing logic, and audio signal management into one integrated circuit. This integration allows a host processor to exchange digital audio data while the codec handles analog input selection, output routing, gain control, and signal conversion. The WM8594SEFT/V supports 24-bit audio operation at a maximum sampling rate of 192kHz and accommodates 2Vrms multi-channel audio. Its flexible input and output selection allows multiple analog sources and destinations to be routed through the device, while digital and analog volume controls provide attenuation and gain adjustment within the audio signal chain. These features make the codec suitable for multi-zone entertainment equipment, communications terminals, recording interfaces, and other systems requiring more than a basic stereo codec. As a mixed-signal device, the WM8594SEFT/V requires careful treatment of analog signal integrity and digital clock routing. Its multi-channel architecture can simplify board design by consolidating several audio functions, but correct grounding, decoupling, impedance control, and clock implementation remain essential. The analog and digital sections should use a controlled layout that minimizes coupling between high-gain audio paths, switching clocks, digital control buses, and external power-supply nodes. Typical uses include powered speakers, home-audio equipment, automotive infotainment systems, telephones, personal-audio products, and multimedia appliances. The 192kHz capability is useful when the source system requires high-resolution digital audio, while the 2Vrms interface capability can reduce gain constraints in conventional line-level audio paths. External amplifiers may still be required when the codec must directly drive low-impedance speakers rather than line-level inputs. For a new layout, follow the manufacturer datasheet for the pin-description table, recommended application circuit, decoupling network, clock requirements, and exposed routing guidance. Verify the exact input and output topology, analog signal ranges, digital audio interface format, and supported clocks before finalizing the PCB. Because this page is synthesized from the listed manufacturer and distributor resources, its main added value is a design-oriented summary of the codec's use cases, sourcing requirements, and selection considerations.

RFQ Kontak
WM8595GEFL/RV - 24-Bit 192kHz Audio Codec | Cirrus Logic
WM8595GEFL/RV

WM8595GEFL/RV - 24-Bit 192kHz Audio Codec | Cirrus Logic

The Cirrus Logic WM8595GEFL/RV is a 24-bit multichannel audio codec supporting operation up to 192 kHz and a 2 Vrms output level, housed in a 48-pin QFN package. It is designed for audio systems that require digital-to-analog and analog-to-digital conversion within one integrated interface device. The combination of 24-bit resolution, 192 kHz sampling capability, and 2 Vrms signal handling positions the WM8595GEFL/RV for high-fidelity consumer, communications, and multimedia audio equipment. An audio codec is a mixed-signal interface IC that converts digital audio samples into analog signals, converts analog inputs into digital data, and provides the associated clocking, filtering, and signal-path controls. Within the broader semiconductor hierarchy, a codec belongs to the interface IC class, connects digital audio logic to analog circuitry, and sits between a processor or digital audio bus and external microphones, speakers, headphones, or line-level inputs. The WM8595GEFL/RV's defining listed features include 24-bit audio resolution, operation to 192 kHz, and support for 2 Vrms signals. These figures indicate suitability for high-resolution playback, recording, and audio processing systems. The 192 kHz capability also makes the device relevant to professional monitoring and consumer applications that sample above the CD standard rate of 44.1 kHz, while the 2 Vrms output range can simplify matching to line-level downstream circuitry. Integrating conversion functions into one codec can reduce the number of separate converters in an audio design. However, analog performance depends on the complete signal chain, including the digital audio interface, clock source, supply arrangement, decoupling, grounding, output filtering, and the impedances presented by the connected amplifier or recorder. The codec should therefore be evaluated as part of the board-level audio architecture rather than selected from resolution and sampling-rate specifications alone. Typical uses include multichannel home entertainment equipment, active speaker systems, recording interfaces, digital mixers, audiovisual receivers, and communication terminals requiring synchronous analog and digital audio paths. The 48-QFN package supports compact designs, but its dense footprint makes careful escape routing and clean supply distribution important. Clocking, ground reference, analog routing, and exposed-pad thermal management should be planned before schematic capture. The primary design consideration is signal integrity at the analog and digital interfaces. Keep analog input and output routing away from switching nodes, use the manufacturer-recommended decoupling and clock connections, and provide a continuous ground reference beneath the device. Verify timing margins and audio-channel mapping in the final schematic and layout because changes to clocking, grounding, or filtering can affect observable channel performance. This page organizes the available WM8595GEFL/RV specifications, identifies the verified sourcing route for the manufacturer datasheet, compares the closely related WM8595GEFL/V device, and summarizes practical packaging, replacement, lifecycle, and sourcing considerations. It also highlights where detailed electrical, acoustic, pinout, and application information must be confirmed in the official device documentation before a production design is released.

RFQ Kontak
WM8711CLGEFL/R - 24-Bit Stereo Audio DAC | Cirrus Logic
WM8711CLGEFL/R

WM8711CLGEFL/R - 24-Bit Stereo Audio DAC | Cirrus Logic

The Cirrus Logic WM8711CLGEFL/R is a 24-bit stereo digital-to-analog converter with a 96 kHz maximum sampling rate, DSP processing, and I2S digital audio interfacing in a 28-QFN 5 x 5 mm package. It operates from a 1.42 V to 3.6 V supply and includes stereo headphone and line-input functionality, making it suitable for compact consumer audio systems. An audio DAC is a digital-to-analog converter, a category of data-conversion IC that transforms digital audio samples into continuous analog voltage signals. In the broader signal-chain hierarchy, it sits between a digital audio source—such as a host controller, USB interface, or digital audio processor—and an analog headphone or line-output amplifier. A stereo DAC supports two independent audio channels, while its DSP functions can perform signal processing before the analog output stage. The WM8711CLGEFL/R combines a 24-bit conversion format with operation up to 96 kHz. Its I2S interface provides a conventional digital audio connection to a source device, while the integrated DSP adds configurable processing capability. The dual-channel architecture supports stereo playback paths, and the listed headphone and line-in functions allow the device to participate in complete audio signal chains rather than serving only as a basic conversion stage. The component uses CMOS technology and is packaged in a compact 28-terminal PQCC28-style surface-mount package measuring 5 x 5 mm with a stated 0.85 mm pitch. Its low-voltage 1.42 V to 3.6 V operating range is suitable for portable and embedded audio systems in which supply efficiency and board area are important. The reel suffix identifies the tape-and-reel shipping configuration represented by the WM8711CLGEFL/R ordering code. Typical uses include digital headphone playback, line-level stereo audio outputs, compact consumer audio equipment, portable media systems, and embedded audio subsystems. In these applications, the I2S interface can receive digital samples from an audio controller, the DSP can perform configured signal processing, and the converter can generate stereo analog signals for downstream amplification. The exact digital format, master-clock requirements, filter configuration, and output topology should be confirmed from the manufacturer datasheet. Designers should treat the 1.42 V minimum and 3.6 V maximum supply limits as firm operating boundaries. Decoupling, analog-output routing, clock generation, and exposed-pad thermal management must follow the recommended layouts in the manufacturer datasheet. This part has a documented end-of-life notice, so new designs should confirm lifecycle availability and obtain an approved sourcing plan before committing the component to a production BOM. This page consolidates the confirmed converter architecture, package information, supply limits, lifecycle notice, sourcing guidance, and engineering considerations for engineers evaluating the WM8711CLGEFL/R. It also distinguishes documented device functions from parameters that require direct verification in the manufacturer datasheet, helping teams assess fit before layout work begins.

RFQ Kontak
WM8716SEDS/V - 24-Bit Stereo DAC | Cirrus Logic
WM8716SEDS/V

WM8716SEDS/V - 24-Bit Stereo DAC | Cirrus Logic

Cirrus Logic WM8716SEDS/V is a high-performance stereo digital-to-analog converter with 24-bit resolution, a maximum sampling rate of 192 kHz, and a 28-pin SSOP package. It accepts digital audio through an SPI-compatible serial interface and operates from a 3.3 V to 5 V analog and digital supply range. The device is designed for consumer audio equipment requiring two-channel conversion with high-resolution playback. A DAC is a data converter that transforms digital audio samples into proportional analog voltages or currents. In the signal hierarchy, a stereo DAC sits between a digital audio source and an analog power amplifier. It converts compact disc, DVD, home-theater, set-top-box, digital-TV, and other digital-audio streams into a left and right analog pair suitable for downstream audio amplification. The WM8716SEDS/V belongs to the audio DAC, data converter, and integrated audio IC categories. The WM8716SEDS/V provides two audio channels, 24-bit conversion, and operation at sampling rates up to 192 kHz. Its SPI-compatible control interface supports digital configuration of operating functions, while the integrated oscillator indicated by the product description provides a timing reference for the conversion system. A single 3.3 V to 5 V supply range simplifies mixed-voltage audio designs that also use modern digital source components. The converter is intended for hi-fi and multimedia applications where channel separation, audio bandwidth, and direct digital control are important. At 192 kHz, it supports high-resolution audio playback while retaining a two-channel architecture. Its 28-pin SSOP package provides enough connections for stereo analog outputs, digital audio data, serial control signals, clocking, power, and ground without requiring a large surface-mount footprint. Typical uses include CD and DVD players, home-theater receivers, set-top boxes, digital televisions, multi-channel audio systems, and other consumer playback equipment. The stereo DAC can sit between an audio processor or digital transport and an analog power-amplifier stage. Its 24-bit format and 192 kHz maximum rate are particularly useful when the source material exceeds conventional CD resolution and the downstream converter must preserve the original sample rate. A critical design consideration is separating analog and digital return paths. Keep the stereo analog outputs away from SPI clock and data traces, connect decoupling capacitors close to the supply pins, and use the pin-description table in the Cirrus Logic datasheet when assigning PCB tracks. Designers should also verify the required master clock, digital interface mode, and analog output configuration in firmware before releasing a production layout. This page combines the manufacturer specifications, verified distributor identification, a documented same-footprint replacement candidate, application guidance, and practical PCB considerations. It provides a focused engineering reference for evaluating the WM8716SEDS/V in stereo digital-audio systems while clearly separating known electrical facts from parameters that still require datasheet confirmation.

RFQ Kontak
WM8718SEDS/V - 24-Bit Stereo Audio DAC | Cirrus Logic
WM8718SEDS/V

WM8718SEDS/V - 24-Bit Stereo Audio DAC | Cirrus Logic

Cirrus Logic WM8718SEDS/V is a 24-bit differential stereo digital-to-analog converter with volume control, supporting audio processing up to 192 kHz and digital audio through an I2S interface. The device is supplied in a 20-SSOP package for surface-mount assembly. Its combination of differential outputs, integrated digital volume control, and high-resolution conversion makes it suitable for professional audio, consumer audio, communications equipment, and multimedia playback systems. A DAC is a digital-to-analog converter, a signal-conversion integrated circuit that transforms sampled digital audio into an analog voltage suitable for amplification and loudspeaker output. Within the broader semiconductor hierarchy, the WM8718SEDS/V belongs to the ADC/DAC class of data-conversion ICs and ultimately to the integrated-circuit category. It provides the output-side conversion function in a digital audio signal chain, typically following a source, codec, decoder, or digital audio processor. The manufacturer datasheet identifies the WM8718SEDS/V as a 24-bit DAC operating to 192 kHz with digital signal processing, I2S connectivity, differential stereo outputs, and volume control. These features distinguish it from basic fixed-output DACs: differential output architecture supports balanced audio routing, while integrated volume control allows output-level adjustment without relying exclusively on a separate analog attenuator. The I2S interface also provides a conventional connection to digital audio processors and application processors. The 20-SSOP package supports compact, surface-mount PCB construction while exposing the required digital, analog, clock, and power connections. Because the converter handles both digital and analog signals, board implementation requires careful partitioning. The digital interface and clock signals should remain separated from the differential analog outputs, with the manufacturer’s recommended application circuit and pin description used as the basis for component placement and trace routing. Typical uses include multichannel consumer-audio receivers, powered speakers, sound-bar signal paths, digital mixing consoles, portable listening equipment, and embedded audio systems that require a compact stereo DAC. The 192 kHz capability is useful when the source material and upstream signal path support that rate, although operating at the maximum rate generally requires correspondingly clean clocking, layout, and power delivery. Designers should verify the required master clock, I2S word length, sample-rate configuration, output load, and external filtering against the manufacturer datasheet before layout release. Differential routing should be treated as a matched pair, and the analog return path should connect cleanly to the device ground reference. These controls help preserve channel balance and reduce distortion introduced by the PCB rather than by the converter itself. This product page combines the exact manufacturer and distributor identifiers, organizes the documented conversion and interface capabilities, and adds application, comparison, replacement, and layout guidance. It is intended to help engineers narrow a DAC choice by resolution, sample rate, interface, package, output architecture, and assembly requirements before completing a production BOM.

RFQ Kontak
WM8725CGED - 24-Bit Stereo Audio DAC | Cirrus Logic
WM8725CGED

WM8725CGED - 24-Bit Stereo Audio DAC | Cirrus Logic

The Cirrus Logic WM8725CGED is a 24-bit stereo audio digital-to-analog converter with a 96 kHz sampling rate, selectable normal or I2S-compatible serial input, and a 14-pin SOIC package. According to the verified distributor listing, it is designed as a special-purpose audio DAC and provides an excellent 99 dB signal-to-noise performance. The WM8725 belongs to the audio DAC hierarchy: digital-to-analog converter, audio converter, data-acquisition and signal-conversion integrated circuit. Its function is to convert digital audio samples into left and right analog output signals while preserving low-noise performance for portable audio equipment, video CD players, and related consumer audio systems. The selectable serial interface supports 16-bit to 24-bit digital input formats, while integrated digital filtering helps shape the conversion output. Key verified features include stereo DAC operation, 24-bit resolution, 96 kHz operation, normal or I2S-compatible serial data interfaces, and 99 dB signal-to-noise performance. The 14-SOIC package is appropriate for conventional surface-mount PCB assembly. Exact supply-voltage limits, analog output specifications, clock requirements, filter characteristics, and electrical operating limits were not included in the supplied source text and are therefore not inferred here. The device architecture combines a digital input interface, digital filtering, and sigma-delta DAC stages. This arrangement is suitable when a system accepts digital audio from a decoder, portable player, or digital audio processor and requires analog stereo outputs. The 99 dB SNR figure provides a concrete selection criterion when comparing audio-conversion stages, although system-level noise also depends on the supply, clock, analog output network, grounding, and downstream amplifier. Typical applications include portable audio equipment, video CD players, digital audio adapters, compact stereo systems, and embedded audio products. In each case, the important design question is whether the required input word length, sample rate, interface mode, supply arrangement, and analog output topology match the device and its application circuit. A key design consideration is to preserve clean analog and digital grounding while keeping the digital interface and clock signals away from sensitive analog output paths. Decoupling and output filtering should follow the manufacturer application guidance once the complete electrical data is available. This page synthesizes the verified distributor specifications, source links, and engineering context rather than adding unverified datasheet values. The verified distributor records identify Cirrus Logic as the current source brand and describe WM8725CGED as a 24-bit, 96 kHz, stereo, 14-SOIC audio DAC. LCSC also reports the part as in stock with a listed price of $1.0043, while current quantity pricing beyond that single source is not provided.

RFQ Kontak
WM8725CGED/R - 24-Bit Stereo Audio DAC | Cirrus Logic (Tape & Reel)
WM8725CGED/R

WM8725CGED/R - 24-Bit Stereo Audio DAC | Cirrus Logic (Tape & Reel)

The Cirrus Logic WM8725CGED/R is a 24-bit stereo audio digital-to-analog converter with a 96 kHz sampling rate, selectable normal or I2S-compatible serial input, and a 14-pin SOIC package. According to the verified distributor listing, it is designed as a special-purpose audio DAC and provides an excellent 99 dB signal-to-noise performance. The WM8725 belongs to the audio DAC hierarchy: digital-to-analog converter, audio converter, data-acquisition and signal-conversion integrated circuit. Its function is to convert digital audio samples into left and right analog output signals while preserving low-noise performance for portable audio equipment, video CD players, and related consumer audio systems. The selectable serial interface supports 16-bit to 24-bit digital input formats, while integrated digital filtering helps shape the conversion output. Key verified features include stereo DAC operation, 24-bit resolution, 96 kHz operation, normal or I2S-compatible serial data interfaces, and 99 dB signal-to-noise performance. The 14-SOIC package is appropriate for conventional surface-mount PCB assembly. Exact supply-voltage limits, analog output specifications, clock requirements, filter characteristics, and electrical operating limits were not included in the supplied source text and are therefore not inferred here. The device architecture combines a digital input interface, digital filtering, and sigma-delta DAC stages. This arrangement is suitable when a system accepts digital audio from a decoder, portable player, or digital audio processor and requires analog stereo outputs. The 99 dB SNR figure provides a concrete selection criterion when comparing audio-conversion stages, although system-level noise also depends on the supply, clock, analog output network, grounding, and downstream amplifier. Typical applications include portable audio equipment, video CD players, digital audio adapters, compact stereo systems, and embedded audio products. In each case, the important design question is whether the required input word length, sample rate, interface mode, supply arrangement, and analog output topology match the device and its application circuit. A key design consideration is to preserve clean analog and digital grounding while keeping the digital interface and clock signals away from sensitive analog output paths. Decoupling and output filtering should follow the manufacturer application guidance once the complete electrical data is available. This page synthesizes the verified distributor specifications, source links, and engineering context rather than adding unverified datasheet values. The verified distributor records identify Cirrus Logic as the current source brand and describe WM8725CGED/R as a 24-bit, 96 kHz, stereo, 14-SOIC audio DAC. LCSC also reports the part as in stock with a listed price of $1.0043, while current quantity pricing beyond that single source is not provided.

RFQ Kontak
WM8726CGED - 24-Bit 192 kHz Stereo DAC | Cirrus Logic
WM8726CGED

WM8726CGED - 24-Bit 192 kHz Stereo DAC | Cirrus Logic

Cirrus Logic WM8726CGED is a 24-bit, 192 kHz stereo digital-to-analog converter (DAC) with a 14-lead SOIC package and a 3.0 V to 5.5 V supply range. It accepts I2S, 16-bit right-justified, and DSP audio data through a pin-selectable interface, making it suitable for consumer audio equipment, digital televisions, home-theater systems, DVD players, set-top boxes, and automotive audio systems. A stereo DAC is an audio data-converter IC that transforms digital PCM samples into left- and right-channel analog voltage signals. It belongs to the ADC/DAC hierarchy within integrated circuits and ultimately falls under semiconductor signal-conversion and audio-processing devices. In an audio signal chain, the WM8726CGED typically follows a digital audio processor and precedes an analog output amplifier, volume-control stage, or speaker-driving circuit. The verified 24-bit resolution supports high-fidelity digital audio reproduction, while operation up to 192 kHz accommodates high-sample-rate source material. The pin-selectable interface provides compatibility with I2S, 16-bit right-justified, and DSP formatting, reducing host-format adaptation requirements. Its 3.0 V to 5.5 V supply operation supports both common low-voltage digital and mixed analog-supply system architectures. The WM8726CGED provides separate left- and right-channel outputs, digital audio inputs, clock inputs, mute control, and digital control signaling. Its architecture is intended for stereo playback systems where a conventional audio DAC is required without the complexity of a general-purpose conversion subsystem. The package also reflects its role as a compact, surface-mount audio converter for volume-production consumer and automotive electronics. Typical applications include DVD players, home-theater systems, digital televisions, set-top boxes, and automotive audio equipment. In these systems, the device can accept digital audio from a decoder or processor, generate left and right analog outputs, and provide digital mute control. System-level performance still depends on the external clock scheme, output filtering, power-supply implementation, analog gain stage, and speaker or headphone amplifier. Designers should follow the manufacturer’s recommended application circuit, interface timing, decoupling, and output-filtering guidance. Clock routing requires particular care because audio data must be synchronized with the appropriate bit clock and left/right channel signal. Adequate analog and digital supply decoupling helps isolate the converter from switching noise and prevents unintended coupling into the analog output path. This page consolidates verified distributor identification, package and interface facts, supply information, a pin-compatible WM8725 option, application guidance, and engineering-oriented selection notes. It distinguishes documented replaceability from broader functional similarities so designers can avoid treating devices with the same general specifications as guaranteed drop-in replacements.

RFQ Kontak
WM8727CGED/R - 24-Bit 192kHz Stereo DAC | Cirrus Logic
WM8727CGED/R

WM8727CGED/R - 24-Bit 192kHz Stereo DAC | Cirrus Logic

The Cirrus Logic WM8727CGED/R is a 24-bit stereo digital-to-analog converter (DAC) designed for audio systems that require 192 kHz sampling capability and an I2S digital audio interface. The device is offered in an 8-pin SOIC package, making it suitable for compact consumer, communications, and multimedia audio designs. A digital-to-analog converter is an integrated circuit that converts digital audio samples into proportional analog voltage signals that can drive amplifiers, speakers, or line-level output stages. In the broader component hierarchy, the WM8727CGED/R is an audio DAC, within the ADC/DAC class of integrated circuits and the wider signal-conversion and signal-processing semiconductor category. The key headline specifications are 24-bit resolution, a maximum sampling rate of 192 kHz, stereo operation, an I2S serial audio interface, and an 8-pin SOIC package. These attributes position the converter for applications in which digital audio source quality must be preserved through the DAC stage. The 192 kHz capability supports high-resolution audio streams, while the stereo architecture provides two independent analog output channels for conventional left-right playback systems. The WM8727CGED/R belongs to the Wolfson Microelectronics audio-converter product family, which Cirrus Logic has represented through its audio IC portfolio. It is intended for applications where a digital audio stream must be converted into an analog output suitable for downstream amplification. Its I2S interface allows connection to digital audio processors, USB interface controllers, application processors, and digital audio transports. Typical uses include hi-fi audio equipment, digital audio decoding modules, multimedia consoles, audio interfaces, soundbars, set-top boxes, and portable or networked audio products. In these systems, the converter can accept 24-bit digital samples and provide the analog stereo signal required by a headphone or line-output amplifier stage. Board-level design should include correct analog and digital grounding, short output routing, and the bypass capacitors required by the manufacturer datasheet. One important design consideration is that converter headline specifications do not determine the final system audio performance. Clock source quality, digital-audio layout, analog output filtering, power-supply noise, amplifier selection, and output impedance all influence the reproduced signal. Use the manufacturer pin-description table and application information to assign PCB nets and verify the supported clock and interface configurations. This page organizes the verified product identity, package information, interface description, and sourcing links for the WM8727CGED/R. It also provides engineering context for audio-converter selection, distinguishes the exact ordered part from related family members, and highlights where a drop-in substitution requires explicit pin and function verification before PCB release.

RFQ Kontak
WM8728SEDS/V - 24-Bit Stereo DAC | Cirrus Logic
WM8728SEDS/V

WM8728SEDS/V - 24-Bit Stereo DAC | Cirrus Logic

The Cirrus Logic WM8728SEDS/V is a 24-bit, 192 kHz stereo digital-to-analog converter with integrated volume control, I2S digital audio input, and a 20-pin SSOP package. It converts two digital audio channels into balanced or unbalanced analog outputs, making it suitable for audio equipment that requires high-resolution playback and a compact mixed-signal footprint. A stereo DAC is an audio interface that accepts digital PCM samples and reconstructs the corresponding left- and right-channel analog waveforms. In the product hierarchy, a DAC belongs to the ADC/DAC class of data-conversion integrated circuits and supports the broader audio-processing chain. The WM8728SEDS/V combines digital audio input, volume control, and analog output stages in one package, reducing the number of external components required in compact audio products. The converter supports 24-bit digital audio operation at sample rates up to 192 kHz. Its integrated volume control provides a convenient way to adjust playback gain without implementing a separate analog attenuation circuit. The I2S-compatible interface connects to digital audio processors, USB audio bridges, portable media systems, and home-audio equipment, while the 20-pin SSOP package supports conventional surface-mount assembly. System partitioning is especially important for this converter. Digital audio data enters through the serial interface, while the analog section reconstructs left- and right-channel signals at the converter output. Correct synchronization between the audio processor and the DAC is essential for preventing clicks, repeated samples, or channel misalignment. Power, ground, and analog-output routing must be arranged to minimize noise coupling into the reconstructed waveform. Typical uses include digital active speakers, compact stereo amplifiers, USB audio equipment, portable audio products, and embedded playback systems. The 192 kHz capability makes the device appropriate for high-resolution audio paths, while the integrated volume control simplifies signal-chain design. The same device can support headphone, line-level, or other analog stages when its output configuration and external network are matched to the intended load. The primary design trade-off is integration versus implementation flexibility. Integrated volume control reduces external circuitry and helps simplify control software, but an adjustable external analog amplifier may provide wider gain control or additional filtering. Before finalizing the layout, consult the manufacturer datasheet for the exact output-mode pins, recommended capacitors, supported clocking arrangements, and analog output configuration. This product summary consolidates the exact resolution, sample-rate, interface, channel, packaging, and volume-control characteristics into an engineering-focused selection guide. It also distinguishes the WM8728SEDS/V from the identified WM8728SEDS-RV option and provides design notes covering clocking, grounding, filtering, output loading, and thermal verification for dependable stereo audio implementation.

RFQ Kontak
WM8731CLSEFL Stereo Audio Codec with Headphone Driver | Cirrus Logic
WM8731CLSEFL

WM8731CLSEFL Stereo Audio Codec with Headphone Driver | Cirrus Logic

The Cirrus Logic WM8731CLSEFL is a stereo audio codec with integrated headphone driver, designed for portable Internet audio devices and other embedded audio systems. The device is identified as a 24-bit serial audio interface and is offered in a 28-QFN 5 x 5 mm package. Its primary function is to combine audio input conversion, audio output conversion, digital audio serial interfacing, and headphone amplification within one compact integrated circuit. The 24-bit architecture supports high-resolution digital audio signal processing, while the integrated headphone driver reduces the need for external analog output stages in headphone-equipped products. An audio codec is a mixed-signal semiconductor that converts analog audio into digital data and converts digital audio back into analog signals. In the wider hierarchy, the WM8731CLSEFL belongs to the audio codec category, combines an ADC and DAC, and operates as an interface IC for portable audio equipment. This integration helps simplify board space and signal routing compared with separate converters, amplifiers, and control logic. The exact sampling-rate, voltage, dynamic-range, and headphone-output details should be confirmed against the manufacturer datasheet before final schematic and firmware release. Key documented characteristics include a 24-bit serial audio interface, a 28-QFN package measuring 5 x 5 mm, and support for portable Internet audio applications. The WM8731 is manufactured on a CMOS process and is identified as an ESD-sensitive device, so production handling should include appropriate electrostatic-discharge controls. The integrated headphone-driver architecture is particularly relevant to portable products that need a local audio output without a separate output amplifier. The WM8731CLSEFL can be paired with a host processor through its serial digital audio interface, allowing recorded or streamed audio to be decoded and mixed within the same system. Its compact package is suitable for space-constrained portable equipment, while the integrated analog and digital functions support a streamlined audio signal chain. Designers should confirm logical-interface levels, clocking, sample-rate support, analog input configuration, and external component requirements against the manufacturer datasheet. Typical uses include portable audio players, Internet-audio products, headset electronics, portable media devices, and compact embedded audio systems. The device is also relevant to designs where a headphone output and microphone or line input must coexist with a serial digital audio processor. The integration can reduce external component count, although headphone-output loading, thermal conditions, and analog grounding still require careful validation. A key design consideration is the separation of analog and digital signal paths. Keep microphone and headphone-related analog routing away from high-speed serial clock lines, provide the decoupling and filtering specified by the manufacturer, and use stable low-noise supplies for audio performance. Because the device includes sensitive mixed-signal circuitry, PCB layout and grounding can be as important as the nominal codec specifications. This product page combines the manufacturer datasheet identity, package information, available distributor listings, lifecycle-oriented sourcing context, and practical integration guidance. It is intended to help engineers identify the correct footprint, plan the surrounding audio architecture, and determine whether the WM8731CLSEFL matches the required portable-audio application.

RFQ Kontak
WM8731CSEFL - Stereo Audio Codec with Headphone Driver | Cirrus Logic
WM8731CSEFL

WM8731CSEFL - Stereo Audio Codec with Headphone Driver | Cirrus Logic

Cirrus Logic, Inc. WM8731CSEFL is a stereo audio codec with an integrated headphone driver, 24-bit serial audio interface, programmable sample-rate support, and a 28-QFN 5 mm by 5 mm package. The device is positioned for portable Internet audio equipment that requires one compact IC to perform digital-to-analog conversion, headphone amplification, and analog audio input handling. An audio codec is an interface IC that converts digital audio samples into analog signals and accepts analog audio for conversion into a digital format. In the broader component hierarchy, the WM8731 belongs to the audio codec class, sits within interface ICs, and ultimately forms part of a signal-chain or audio-processing subsystem. Its integrated headphone driver reduces the need for separate analog output stages in space-constrained portable products. The WM8731CSEFL is identified as a 24-bit codec with a serial interface and programmable sample rates. Those features support designs in which a host processor exchanges audio data over a serial bus while an application selects the required sample rate. The operating supply range listed for this device is 2.7 V to 3.6 V, which makes it appropriate for 3.3 V portable systems with a regulated analog or mixed-signal supply rail. The 28-QFN package measures 5 mm by 5 mm and supports compact PCB placement. Because it integrates the codec and headphone-driver functions, board designers can reduce the number of discrete audio components while preserving a defined signal path from a digital audio source to headphones or another analog output. The manufacturer datasheet is the authoritative source for supported interfaces, control registers, clocking requirements, analog performance, and recommended application circuits. Typical uses include portable Internet audio players, digital personal audio products, compact consumer audio equipment, and embedded systems with a headphone connector. The codec can sit beside a host processor or digital audio interface, with the host configuring the serial link and operating registers. System partitioning still depends on microphone topology, analog signal levels, connector impedance, and the desired headphone output power. Careful layout is essential because mixed-signal devices combine high-speed digital interfaces with low-level analog inputs and outputs. Place decoupling capacitors close to the supply pins, route headphone outputs away from sensitive inputs, and follow the ground and layout recommendations in the manufacturer datasheet. Verify package dimensions, exposed-pad requirements, and pin assignments against the latest datasheet revision before fabrication. This product page organizes the device identity, package information, operating voltage, sourcing questions, replacement limits, and application-oriented design guidance. Because audio designs are sensitive to clocking, grounding, and output loading, engineers should use the manufacturer application information together with board-level acoustic and thermal validation before releasing a production design.

RFQ Kontak
WM8731SEDS/V - 24-Bit Stereo Codec with Headphone Driver | Cirrus Logic
WM8731SEDS/V

WM8731SEDS/V - 24-Bit Stereo Codec with Headphone Driver | Cirrus Logic

The Cirrus Logic WM8731SEDS/V is a 24-bit stereo audio codec with an integrated headphone driver, programmable sample rates up to 96 kHz, and a 28-pin SSOP package. It operates from a 2.7 V to 3.6 V analog supply and supports an ambient temperature range of -40°C to 85°C. The device is designed for portable Internet audio, multimedia, communications, and other embedded systems requiring digital audio conversion and headphone-output support. An audio codec is an interface IC that converts digital audio samples into analog signals and converts analog audio inputs into digital data. Its hierarchy includes audio codec, audio interface IC, signal-conversion device, and semiconductor. The WM8731SEDS/V integrates stereo conversion, digital audio interfaces, gain control, and headphone drive into one device, reducing the number of external components required in portable and embedded audio equipment. Key features include 24-bit resolution, programmable sampling rates, a stereo headphone driver, and operation from 2.7 V to 3.6 V. The 96 kHz maximum sample rate supports higher-bandwidth digital audio streams than designs limited to 48 kHz. Its integrated headphone stage is particularly useful where the design needs amplified stereo output without a separate headphone amplifier. The part uses a 28-pin SSOP package and is controlled through a serial audio interface and digital control interface. Exact interface timing, supported data formats, clock requirements, filter characteristics, and register addresses are defined by the manufacturer datasheet. System designers should treat the digital interface configuration and analog power arrangement as critical parts of the implementation rather than treating the codec as a simple standalone converter. Typical uses include portable media players, personal audio devices, headset electronics, internet appliances, voice-processing equipment, and embedded audio systems. It is also appropriate for prototype platforms that require a conventional stereo codec with an integrated headphone output. In these systems, the codec can sit between a digital audio processor and analog headphones or line-level circuitry. When designing the circuit, use the pin-description and reference-layout information in the manufacturer datasheet to implement supply decoupling, analog and digital grounding, clock routing, and output filtering. Confirm that the external clock, interface voltage levels, supported audio format, and bypass-capacitor values match the intended system before releasing the PCB layout. This page combines the verified WM8731SEDS/V product identity, technical-package details, sourcing information, carefully qualified alternatives, comparison data, and practical integration guidance. It also distinguishes documented drop-in candidates from functional alternatives that would require different packages, footprints, or interface verification.

RFQ Kontak
WM8737CLGEFL/R - 24-Bit Stereo ADC | Cirrus Logic | Audio
WM8737CLGEFL/R

WM8737CLGEFL/R - 24-Bit Stereo ADC | Cirrus Logic | Audio

The Cirrus Logic WM8737CLGEFL/R is a low-power stereo audio analog-to-digital converter with 24-bit resolution, operation up to 96 kHz, an SPI interface, and a 32-pin QFN package measuring 5 x 5 mm. The device combines stereo ADC conversion and microphone preamplifier functionality for compact digital audio systems. An audio ADC is a signal-processing semiconductor that converts left- and right-channel analog voltages into digital sample data. It belongs to the ADC hierarchy within data-converter integrated circuits, where precision, bandwidth, noise performance, clocking, and interface efficiency determine suitability for recording, communication, and consumer audio equipment. The WM8737CLGEFL/R supports 24-bit conversion at rates up to 96 kHz and uses a serial peripheral interface for digital data transfer. Its analog and digital supply range of 1.42 V to 3.6 V supports low-voltage portable and embedded designs. The operating temperature range of -25°C to +85°C covers industrial-room conditions, while the surface-mount QFN-32 package supports compact PCB construction. The stereo ADC architecture is intended to capture two audio channels simultaneously, making the device suitable for microphone preamplification and stereo line-level digitization. A serial interface reduces the number of data connections compared with a parallel ADC and allows the converted audio stream to be transferred efficiently to a digital signal processor, audio controller, or system-on-chip. Typical uses include digital microphones, voice-capture equipment, audio recording modules, soundbars, speaker systems, and portable consumer electronics. Low-power operation is particularly useful in battery-powered products where every milliampere affects run time. The small 5 x 5 mm footprint also helps designers retain a compact board area while implementing two-channel conversion. PCB implementation requires careful separation of analog and digital return paths, placement of the exposed thermal pad, and a clean supply arrangement around the converter. Use the manufacturer datasheet for the complete pin-description table, recommended application circuit, exposed-pad layout, and supported interface timing before assigning tracks. This page combines the manufacturer-device identity, package information, commercial inquiry path, technical application guidance, and available cross-reference information to help engineers evaluate the WM8737CLGEFL/R for low-voltage stereo audio acquisition systems.

RFQ Kontak
WM8738CGED - 24-Bit 96kHz Stereo ADC | Cirrus Logic
WM8738CGED

WM8738CGED - 24-Bit 96kHz Stereo ADC | Cirrus Logic

The Cirrus Logic WM8738CGED is a 24-bit stereo audio analog-to-digital converter supporting sampling rates up to 96 kHz and digital audio data transfer through I2S. It is supplied in a 14-pin SOIC package and is identified by distributor listings as a low-power stereo ADC device. The WM8738CGED is intended for audio capture, conversion, and signal-chain designs where a compact package, stereo conversion, and a 96 kHz maximum sampling rate are the principal selection criteria. An ADC, or analog-to-digital converter, is an integrated circuit that samples an analog audio voltage and converts it into a digital representation. A stereo ADC processes two audio channels, which allows left and right microphone, line, or other analog sources to be captured simultaneously. Digital audio words are then transferred to a processor, digital signal processor, or audio codec using a serial interface such as I2S. The WM8738CGED therefore occupies the boundary between the analog input stage and the digital audio processing stage. According to the verified DigiKey and Mouser product listings, the key device parameters are 24-bit conversion, operation up to 96 kHz, stereo ADC operation, I2S support, and a 14-SOIC package. The 24-bit resolution provides a nominal 16,777,216 quantization levels per channel, while 96 kHz supports the conversion rate required by many CD-rate and higher-rate audio systems. These figures make the part applicable to consumer audio, communications, multimedia, and embedded audio-conversion equipment. The 14-SOIC package is mechanically compact relative to many older through-hole audio converters and is suitable for conventional surface-mount PCB assembly. Its small pin count should be evaluated carefully in designs requiring multiple analog inputs, auxiliary digital functions, or extensive filtering. The verified distributor data does not expose the complete input topology, clocking architecture, analog reference arrangement, or auxiliary interface implementation, so those details should be confirmed in the manufacturer datasheet before layout is released. For implementation, the analog input path, grounding, and clocking integrity are the decisive engineering areas. Short, symmetrical analog traces, adequate bypass capacitors, and a clean source of digital audio clock signals help preserve converter performance. Designers should also verify supported master and slave clock configurations, input coupling requirements, and the required logical control sequence against the official datasheet. This page consolidates verified distributor specifications, source links, and drop-in replacement information for the Cirrus Logic WM8738CGED. It also separates confirmed parameters from values that still require the manufacturer datasheet, preventing unverified electrical, pinout, and compliance claims from being presented as established facts.

RFQ Kontak
WM8738CGED/R - 24-Bit Stereo ADC, 96kHz, 14-SOIC | Cirrus Logic
WM8738CGED/R

WM8738CGED/R - 24-Bit Stereo ADC, 96kHz, 14-SOIC | Cirrus Logic

Cirrus Logic Inc. WM8738CGED/R is a low-power 24-bit stereo audio analog-to-digital converter with a maximum sampling rate of 96 kHz, supplied in a 14-pin SOIC package. It is designed for audio systems that require digital conversion of left and right analog channels while minimizing component count and board space. The device also includes integrated audio processing and digital audio interface functions, making it suitable for consumer audio, communications, and embedded audio equipment. An ADC is a data-conversion IC that converts continuous analog voltage signals into digital samples. Within the broader semiconductor hierarchy, the WM8738CGED/R belongs to the analog-to-digital converter and audio codec product class, with an I2S digital output that connects to a digital signal processor, audio processor, or other digital audio controller. Its stereo architecture permits simultaneous or coordinated conversion of two audio channels rather than requiring a separate converter for each channel. The principal documented specifications are a 24-bit conversion resolution, a 96 kHz maximum sampling rate, stereo operation, I2S connectivity, low-power operation, and a 14-SOIC package. These characteristics make the converter suitable for digital recording, playback, voice processing, audio capture, and communication equipment. The I2S interface reduces the number of external digital signal lines needed to transfer converted audio data into a host processor. The WM8738CGED/R can be used as the analog front end of a compact stereo audio subsystem. Its multiple digital inputs and outputs support digital-audio signal routing, while integrated mixer, filter, gain, and analog input functions can reduce the need for separate support circuitry. Designers should confirm the required input impedance, clock configuration, codec routing, and system-level channel mapping in the manufacturer datasheet before finalizing the PCB. Typical applications include consumer audio equipment, portable and connected audio products, voice-recording systems, communication terminals, and embedded multimedia platforms. The 14-pin SOIC package is mechanically straightforward for conventional surface-mount assembly, although the analog and digital sections still require careful grounding and decoupling to limit noise coupling. When designing around this converter, prioritize a clean analog supply, short return paths, and separate routing of sensitive audio inputs away from switching nodes and digital clock lines. Confirm the supported input configuration, master or slave clock mode, data format, and required external components against the manufacturer datasheet and reference circuit before production release. This page combines the exact part identification, package information, converter specifications, practical integration guidance, sourcing workflow, and compatibility analysis. It also distinguishes confirmed technical facts from parameters that must be checked directly in the manufacturer datasheet, helping engineers plan a sound evaluation rather than relying on an abbreviated distributor listing.

RFQ Kontak