Mga Produkto (46,000+)

XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD
XC3S1000-4FT256I

XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD

The AMD XC3S1000-4FT256I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 1,920 logic array blocks, and 173 user I/Os. The device operates from a 1.2 V core supply and has a 630 MHz performance rating. It is packaged in a 256-ball fine-pitch ball grid array designated FT256. A field-programmable gate array, or FPGA, is a programmable digital logic device within the broader semiconductor and configurable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel processing, control, interface, and signal-processing logic in a reconfigurable device. The Spartan-3 architecture combines logic cells, dedicated block RAM, digital signal processing resources, and programmable I/O within one integrated circuit. The XC3S1000-4FT256I provides 432 kbit of embedded memory according to the manufacturer family documentation. Its -4 speed designation identifies the device performance class, while the I suffix identifies the industrial-temperature ordering option. A 256-ball FTBGA package supports dense PCB routing and is suitable for compact control, communications, instrumentation, and embedded-processing systems where many external signals must terminate on a programmable device. Within the Spartan-3 family, this device provides 173 user I/Os and up to 630 MHz device performance. The programmable architecture permits design changes without changing the PCB, while dedicated block RAM supports buffering, packet storage, and moderate-width data paths. The 1.2 V core operating point reduces core power relative to earlier-generation programmable devices, although total board power still depends on I/O activity, configuration resources, and the selected design. Typical uses include industrial automation, embedded control, data acquisition, communications interfaces, and low-cost digital signal processing. The combination of 17,280 logic elements and 173 I/Os allows one device to consolidate several discrete logic functions. Designs requiring more memory, higher I/O density, or a newer migration path should be evaluated against larger Spartan-3 variants or later AMD FPGA families before PCB release. The FT256 package requires careful power, ground, and signal-integrity planning. Follow the Spartan-3 family datasheet for decoupling, configuration, clocking, and package-ball guidance, and validate every board with the completed design rather than relying only on theoretical resource counts. Confirm that the assembled board, manufacturing process, and operating environment remain compatible with the industrial-grade ordering option.

RFQ Kontak
XC3S1000-5FG320C - 1M-Gate Spartan-3 FPGA | Xilinx
XC3S1000-5FG320C

XC3S1000-5FG320C - 1M-Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-5FG320C is a 1-million-system-gate Spartan-3 field-programmable gate array with 17,280 logic cells, 221 I/O, and 442,368 bits of block RAM. It operates from a 1.2 V core supply, uses 90 nm FPGA technology, and is packaged in a 320-pin fine-pitch ball grid array for surface mounting. An FPGA is a semiconductor whose digital logic, interconnect, memory, and I/O behavior are configured through a programmable bitstream. Within the product hierarchy, the XC3S1000 belongs to the Spartan-3 FPGA family, joining programmable logic devices and field-programmable gate arrays within the broader integrated-circuit and semiconductor categories. This makes it appropriate when a design needs hardware parallelism, reconfigurable interfaces, or dedicated logic rather than a software-controlled processor. The device provides 725 MHz maximum performance and 17,280 configurable logic cells. Its 442,368 bits of block RAM support buffering, data storage, and parallel processing, while 221 I/O pins provide extensive connectivity for external memories, control signals, communications, and mixed-signal interfaces. The 320-FBGA package supports compact, high-density PCB layouts but requires careful escape routing and fine-pitch assembly capability. The XC3S1000 architecture is designed for implementation of parallel data paths, protocol bridges, control logic, embedded memory structures, and general-purpose programmable logic. Performance depends on clocking, routing, resource utilization, and the selected FPGA design. A bitstream generated for the correct device, package, speed grade, and configuration settings is essential for reliable operation. Typical applications include industrial automation controllers, networking and communications equipment, test and measurement systems, embedded video processing, sensor acquisition, and legacy interface conversion. The large I/O count and on-chip RAM make the device useful where several external interfaces and parallel data operations must coexist on one device. Design planning should account for the fine-pitch BGA footprint, power decoupling, clock jitter, I/O standards, configuration memory, and thermal performance. PCB signal-integrity analysis is particularly important for high-speed interfaces, while careful bank and voltage planning prevents incompatible I/O standards from being assigned to the same power domain. This page combines the device specifications with application guidance, engineering design notes, and pin-compatible Spartan-3 alternatives. It also highlights where speed grade, temperature grade, and device revision choices affect replacement decisions without overlooking the constraints of an existing 320-ball PCB layout.

RFQ Kontak
XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD
XC3S1000-5FG456C

XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD

The AMD XC3S1000-5FG456C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 333 I/O interfaces, and a 1.2 V supply in a 456-ball FBGA package. It is a 90 nm programmable logic device built for cost-sensitive embedded systems requiring substantial logic, memory, and parallel I/O capacity. The -5 speed grade and FG456 package identify this configuration as the commercial-temperature, 456-ball member of the Spartan-3 family. An FPGA is a programmable semiconductor whose internal logic, routing, and I/O resources are configured after manufacture. Within the product hierarchy, this device is a field-programmable gate array, part of the broader class of programmable logic devices and integrated circuits. This architecture allows one board design to support multiple hardware functions, shorten development cycles, and support field upgrades through a programmable configuration bitstream. The XC3S1000-5FG456C provides 17,280 logic elements distributed across 1,920 configurable logic blocks, with 7,680 adaptive logic modules and 432 embedded-memory bits identified for this device. Its 333 user I/O interfaces support communication with external processors, memory, converters, and industrial peripherals. A listed maximum clock frequency of 725 MHz describes a headline device capability; actual system performance still depends on the selected design, speed grade, clocking scheme, and timing constraints. The device uses a low 1.2 V operating supply and 90 nm process technology. These characteristics place it in the Spartan-3 generation, which combined a large gate count with a cost-oriented architecture for volume embedded applications. Its ball-grid package concentrates a high pin count into a compact 23 mm by 23 mm square footprint while supporting a 1.00 mm terminal pitch. Typical applications include industrial control, data acquisition, communications infrastructure, embedded instrumentation, video processing, and legacy platform control. The large I/O count is especially useful when a design must bridge multiple buses, capture parallel sensor data, or connect directly to high-speed external logic without requiring another programmable device. For a new PCB layout, use the manufacturer pinout and package-mechanical guidance for the exact FG456 ball map. Existing designs should be checked for voltage, temperature, timing, configuration-interface, and pinout compatibility before substituting any speed- or temperature-grade variant. Configuration storage, clocking, decoupling, and signal-integrity requirements must also follow the Spartan-3 design guidance.

RFQ Kontak
XC3S1000-5FG676C - 1M Gate 676-BGA Spartan-3 FPGA | AMD
XC3S1000-5FG676C

XC3S1000-5FG676C - 1M Gate 676-BGA Spartan-3 FPGA | AMD

AMD XC3S1000-5FG676C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, and 391 user I/Os, packaged in a 676-ball fine-pitch BGA. It operates from a 1.2 V core supply and is manufactured using 90 nm CMOS technology. The device combines programmable logic, dedicated block RAM, and a broad user-I/O interface in a 27 mm by 27 mm surface-mount package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and interconnect resources are configured after manufacture. In the broader hierarchy, an FPGA belongs to programmable logic devices, alongside complex programmable logic devices, and operates as a configurable element within an embedded control or signal-processing system. This flexibility allows one physical device to implement multiple hardware functions and supports product revisions without changing the printed circuit board. The Spartan-3 architecture provides 442,368 total RAM bits alongside 17,280 logic cells. Its 391 user I/Os support integration with external memory, converters, clocks, communications links, and control peripherals. The -5 speed designation identifies the device's performance grade, while the C suffix denotes the commercial temperature grade associated with an operating range of 0°C to 85°C. The 676-ball FBGA package supports dense board routing while requiring careful escape routing and multilayer PCB construction. Technical complexity increases with the number of available logic and I/O resources. Designers must account for clock-domain constraints, supported I/O standards, memory bandwidth, pin placement, and the finite routing capacity of the selected FPGA. Configuration data controls the implemented circuit, so the bitstream, configuration interface, clock source, startup behavior, and reset strategy should be validated as one complete design rather than treated as isolated device features. Typical uses include industrial automation, communications equipment, embedded video control, test and measurement, and general-purpose digital signal processing. In an industrial controller, the FPGA can combine parallel interface logic, protocol conversion, and deterministic sampling in one device. In communications equipment, the same programmable fabric can adapt to different framing and signaling requirements while providing 442,368 RAM bits for buffering or packet processing. PCB implementation is the principal practical consideration for this 676-ball package. Use a board stackup that supports the required escape-routing density, place decoupling close to every supply ball, and follow the manufacturer's ball-map and layout guidance for power, ground, and configuration pins. Confirm the selected footprint and pin assignments against the package drawing before releasing the design. This product page combines the device specifications, same-footprint replacement options, engineering guidance, application fit, and package-related constraints into a practical engineering reference. It also distinguishes exact published attributes from parameters that still require confirmation before schematic or PCB sign-off.

RFQ Kontak
XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-5FT256C

XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-5FT256C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, and 173 user I/O in a 256-ball FTFBGA package. Its core supply operates from 1.14 V to 1.26 V, while the -5 speed designation identifies the device’s performance grade. A field-programmable gate array is a semiconductor whose digital logic, memory blocks, and I/O paths are configured after fabrication. The Spartan-3 FPGA family occupies the hierarchy FPGA, programmable logic device, configurable logic, and semiconductor. This makes the XC3S1000-5FT256C suitable for designs requiring parallel logic, embedded block RAM, programmable interfaces, and field-updatable configurations. Key features include 17,280 logic cells, 442,368 total RAM bits, 1,000,000 system gates, and 173 user I/O. The -5 suffix denotes a specific speed grade, while the FT256C package designation identifies a 256-ball fine-pitch plastic ball-grid-array configuration. These resources support concurrent control logic, data buffering, interface bridging, and protocol-specific state machines without relying on multiple discrete programmable devices. The device is based on the Spartan-3 FPGA architecture and provides 1,920 slices as reported by the product listing. Distributed RAM and dedicated block RAM make it useful for small embedded memories, data pipelines, lookup tables, and temporary packet storage. Its 173 available I/O provide broad connectivity for external memory, clocks, serial links, and control signals, although each interface must still be assigned within the device’s supported electrical and timing constraints. Typical uses include industrial control, telecommunications equipment, data-acquisition systems, embedded instrumentation, and legacy network-interface designs. Its 1M-gate architecture can consolidate parallel control and datapath functions into one package, while the substantial I/O count supports board-level integration with processors, memory devices, transceivers, and custom interface logic. Design planning must account for the FTFBGA package’s fine pitch, differential-pair routing, via-in-pad and solder-mask requirements, and the very large exposed BGA footprint. Signal integrity, decoupling, configuration-memory implementation, and bank-specific I/O constraints should be reviewed against the manufacturer’s Spartan-3 design guidance before schematic or layout signoff. This product record combines the exact XC3S1000-5FT256C package and resource details with practical implementation guidance, speed-grade alternatives, and parameter-by-parameter comparison information. It is intended to help engineers identify a configuration-compatible Spartan-3 option and plan the PCB, toolchain, and interface requirements for a maintainable FPGA platform.

RFQ Kontak
XC3S100E-4TQ144I - 2,160-Cell Spartan-3E FPGA | Xilinx
XC3S100E-4TQ144I

XC3S100E-4TQ144I - 2,160-Cell Spartan-3E FPGA | Xilinx

The Xilinx XC3S100E-4TQ144I is a Spartan-3E field-programmable gate array with 2,160 logic cells, 240 logic blocks, 73,728 RAM bits, and 108 user I/O pins. It operates from a nominal 1.2 V core supply, supports a 1.14 V to 1.26 V voltage range, and is packaged in a 144-pin TQFP. The -4 speed grade supports operation up to 572 MHz. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The XC3S100E belongs to the Spartan-3E FPGA family, which sits within the broader hierarchy of FPGA, programmable logic, digital semiconductor, and embedded-electronics components. This makes it suitable for designs requiring parallel logic, control, data acquisition, interface bridging, or programmable signal processing. The device provides 50,000 system gates and 2,160 logic cells, providing a practical capacity for control logic, protocol interfaces, state machines, and small embedded signal-processing functions. Its 73,728 RAM bits can support data buffering, packet storage, lookup tables, and configuration or working memory. The 108 user I/O pins give a system designer substantial connectivity for buses, counters, serial links, and external data acquisition devices. The XC3S100E-4TQ144I uses a 1.2 V CMOS core and is specified for an industrial temperature range of -40°C to +100°C. The -4 designation identifies its performance grade, while the 144-pin TQFP package provides a conventional leaded surface-mount format with exposed thermal and thermal-pad considerations that must be handled according to the package drawing. Its 90 nm Spartan-3E process generation emphasizes low-cost programmable logic rather than the very high performance of larger modern FPGA families. Typical applications include industrial control and automation, data-acquisition front ends, communications protocol converters, embedded test equipment, instrumentation, and compact embedded-processing subsystems. The device can implement parallel-to-serial conversion, FIFO-based data movement, state-machine control, and custom peripheral functions while allowing firmware or logic revisions without changing the PCB. When assigning this FPGA, verify the exact pin assignments, bank supply requirements, configuration interface, clock topology, and I/O standards against the Spartan-3E family data sheet. The industrial temperature grade makes the part appropriate for temperature-challenged equipment, but the legacy 90 nm process and 2,160-cell limit should be considered against system timing, memory, and current design requirements. This product record combines manufacturer-family technical data with practical distinctions between temperature-grade, lead-free, and extended-temperature ordering variants. It also documents drop-in footprint considerations, configuration and design guidance, and application-specific fit so engineers can evaluate the XC3S100E-4TQ144I against other 144-pin Spartan-3E devices before committing to a design.

RFQ Kontak
XC3S100E-4TQG144I - 100K Gate Spartan-3E FPGA | AMD
XC3S100E-4TQG144I

XC3S100E-4TQG144I - 100K Gate Spartan-3E FPGA | AMD

AMD XC3S100E-4TQG144I is a Spartan-3E field-programmable gate array with 100,000 system gates, 2,160 logic cells, 108 user I/Os, and a maximum clock frequency of 572 MHz, housed in a 144-pin TQFP package. It uses 90 nm CMOS technology and operates from a 1.2 V core supply, combining programmable digital logic with 240 configurable logic blocks. A field-programmable gate array, or FPGA, is a semiconductor whose digital functions are defined after fabrication through a configuration bitstream. Within the product hierarchy, the XC3S100E belongs to the Spartan-3E FPGA family and implements configurable logic blocks, programmable I/O, embedded memory, dedicated multipliers, and clock-management resources. This makes it more flexible than a fixed-function application-specific integrated circuit while offering a different performance, power, and software-development profile from a microcontroller. Key features include 240 configurable logic blocks, 2,160 logic cells, 108 user I/O pins, and up to 100,000 equivalent system gates. The maximum listed clock frequency is 572 MHz, while the 90 nm CMOS process supports integration of programmable logic and dedicated fixed resources on one device. The TQFP-144 package provides 144 physical leads with a 0.5 mm terminal pitch and occupies a 22 mm by 22 mm footprint. The device is designed for parallel digital datapaths, control logic, protocol bridging, signal processing, and general embedded system control. Its resources can be combined in parallel to create wide data paths, while dedicated digital clock managers support controlled clock distribution and phase management. The 108 user I/O pins are distributed through the package, allowing external memory, converters, communication transceivers, and custom interfaces to be connected without requiring a separate large-format programmable device. Typical uses include industrial control, data-acquisition systems, instrumentation, communications equipment, embedded video processing, and legacy digital platforms that require configurable hardware. Designers can implement parallel ADC or DAC interfaces, packet-processing functions, custom peripheral controllers, and mixed logic functions in one FPGA. The 144-lead TQFP package is also practical for boards where a leaded component simplifies inspection, repair, or manual assembly compared with a very fine-pitch BGA. For a new PCB, use the manufacturer pin table and package drawing to assign power, ground, configuration, clock, and user-I/O connections. Place bypass capacitors close to the supply pins, route configuration signals away from high-speed nets, and keep every clock and data trace properly terminated. Because the TQFP has exposed leads on all four sides, confirm connector clearance and solder-assembly access around the 22 mm by 22 mm body. This product page combines the key device specifications, verified family documentation, practical integration guidance, and clearly identified same-footprint alternatives. It also distinguishes the industrial-temperature suffix and lead-free package options so engineers can assess replacement suitability without assuming that every similarly named Spartan-3E ordering code has identical environmental or procurement requirements.

RFQ Kontak
XC3S100E-4VQG100C - 2160 Logic Cell FPGA | Xilinx
XC3S100E-4VQG100C

XC3S100E-4VQG100C - 2160 Logic Cell FPGA | Xilinx

The Xilinx XC3S100E-4VQG100C is a Spartan-3E field-programmable gate array with 2,160 logic cells, 100,000 system gates, 66 user I/Os, and a 1.2 V core supply in a 100-pin VQFP package. The -4 speed grade supports demanding control and signal-processing designs, while the commercial C suffix identifies an operating-temperature range of 0°C to +85°C. It combines programmable logic, dedicated digital signal processing resources, and block memory in one reconfigurable semiconductor device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. In the device hierarchy, an FPGA is a programmable logic device and therefore a more flexible relative of fixed-function logic ICs. Where an application requires parallel control, interface adaptation, protocol conversion, or signal processing, an FPGA can implement multiple digital functions in parallel while allowing field upgrades through a programmable configuration bitstream. The XC3S100E provides 2,160 logic cells and 100,000 equivalent system gates, with 66 I/O pins for connections to external components. Its 1.2 V nominal core supply is specified by listings as a 1.14 V to 1.26 V operating range. A listed maximum clock frequency of 572 MHz applies to the associated 100-pin Spartan-3E device family. These resources are suitable for medium-density embedded control, bus-interface bridging, protocol conversion, data acquisition, and industrial automation logic. The XC3S100E belongs to the Spartan-3E architecture, which combines configurable logic blocks, dedicated multipliers, block RAM, and general-purpose I/O in a low-cost FPGA platform. The -4 designation identifies the device speed grade, while VQG100 identifies the 100-pin very-thin quad-flat-pack configuration and C identifies commercial temperature grade. Because configuration determines the implemented logic, designers must match the bitstream, pin constraints, supported device family, and package to the exact device identifier before programming. Typical uses include industrial control modules, custom peripheral interfaces, communications protocol bridges, motor-control support logic, test equipment, and embedded data-acquisition systems. Its 66 I/Os are useful for parallel digital interfaces, while programmable logic can implement state machines, arbitration, framing logic, and data-format conversion. The 100-pin surface-mount package also supports compact controller boards without requiring the larger ball-grid packages used by higher-capacity devices. PCB design should preserve the manufacturer's recommended power, decoupling, configuration, clock, and I/O layout. Place the core and I/O supply decoupling capacitors close to their associated pins, route configuration signals away from fast switching nodes, and assign pins according to the package-specific constraints and bank voltage rules. Confirm the selected device and bitstream with programming tools before production release because speed and temperature suffixes are not interchangeable in every system qualification context. This page combines device specifications, application guidance, pin-compatible alternatives, comparison parameters, and practical FPGA design notes. The recommended alternatives retain the 100-pin package while distinguishing commercial, industrial, faster-speed, and higher-capacity configurations for easier replacement planning.

RFQ Kontak
XC3S100E-5TQ144C - Spartan-3E 100K FPGA | AMD
XC3S100E-5TQ144C

XC3S100E-5TQ144C - Spartan-3E 100K FPGA | AMD

The AMD XC3S100E-5TQ144C is a Spartan-3E field-programmable gate array with 2,160 logic cells, 108 user I/O pins, and 73,728 RAM bits in a 144-pin TQFP package. The -5 speed grade operates with a 1.14 V to 1.26 V core supply and is positioned for designs requiring up to 657 MHz device performance. A field-programmable gate array is a configurable digital semiconductor whose logic, memory, and I/O can be programmed after fabrication. The FPGA hierarchy extends from configurable logic blocks and look-up tables through the Spartan-3E family to the broader FPGA and programmable-logic-device categories. This flexibility allows one physical package to support multiple interfaces, control functions, and signal-processing implementations. Key device resources include 2,160 logic cells, 240 logic array blocks, 108 user I/O pins, and 73,728 RAM bits. The 144-lead surface-mount package provides substantially more I/O than the smaller Spartan-3E package options. The listed operating temperature range of 0°C to 85°C suits commercial equipment, while the C designation identifies the commercial product grade. The Spartan-3E architecture combines programmable logic, dedicated block RAM, and configurable I/O in a single CMOS device. Its 90 nm CMOS implementation is identified in the manufacturer-family documentation, while the -5 suffix denotes the performance grade used in the ordering code. Engineers should distinguish the device's maximum characterized clock frequency from the frequency actually achievable by a specific design, because routing, timing constraints, logic utilization, and I/O requirements determine the final operating point. Typical uses include industrial control, embedded instrumentation, communication interfaces, digital signal conditioning, and compact embedded systems. The 108 available user I/O positions are especially useful for parallel buses, status and control signals, counters, and multi-channel acquisition systems. The 73,728 RAM bits also permit local buffering, packet storage, counters, and small state-machine implementations without depending entirely on external memory. A critical design consideration is the limited I/O voltage relationship of this legacy FPGA family. Confirm the bank-specific supply requirements, decoupling, clock topology, configuration source, and termination network against the Spartan-3E datasheet before layout release. A 144-pin TQFP also demands careful escape routing between its 0.5 mm pitch leads, so a stable multilayer stack-up and adequate ground-plane continuity are important. This product page combines verified device parameters, same-package replacement options, application guidance, and design-focused comparison information. It also highlights which characteristics are confirmed for the exact XC3S100E-5TQ144C ordering code and which engineering details must be checked in the Spartan-3E documentation before a new board is released.

RFQ Kontak
XC3S1500-4FG320C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG320C

XC3S1500-4FG320C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG320C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 total cells, a maximum clock frequency of 630 MHz, and a 1.2 V nominal supply in a 320-pin flip-chip ball grid array package. The device provides 221 user I/O pins for programmable digital logic, control, signal processing, and communication functions. A field-programmable gate array is a semiconductor IC whose digital behavior is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated I/O, and clocking resources. The Spartan-3 family occupies the FPGA and CPLD segment of the broader semiconductor market and is intended for designs requiring substantial parallel processing without the cost of application-specific integrated circuit development. The XC3S1500-4FG320C offers a 1.2 V core supply, a permitted supply range of 1.14 V to 1.26 V, and 90 nm CMOS process technology. Its 29,952 cells provide substantially more logic capacity than smaller CPLDs, while 221 I/O pins support interfaces to memory, converters, transceivers, and control peripherals. The -4 speed designation is associated with a maximum clock frequency of 630 MHz in the device listing. Programmable logic in the Spartan-3 architecture can implement parallel datapaths, state machines, protocol bridges, and fixed-function accelerators. Dedicated memory and I/O resources allow multiple data paths to operate concurrently, while clock-management features support deterministic internal timing. Exact RAM quantities, supported I/O standards, configuration interfaces, and pin functions must be confirmed in the AMD Spartan-3 family data sheet before final board design. Typical uses include industrial automation and machine vision, embedded communications, video and image processing, data acquisition, networking equipment, and cost-sensitive digital control. The XC3S1500-4FG320C is particularly appropriate when a design needs substantially more parallelism than a small CPLD but does not require the resources or power envelope of a larger high-end FPGA. PCB planning must account for the dense 320-ball FBGA footprint, controlled-impedance routing, decoupling near the core and I/O supplies, and proper configuration-memory interface layout. Designers should follow the AMD package pinout and recommended-layout guidance, validate signal integrity across every implemented I/O standard, and confirm thermal performance at the highest expected junction temperature. This product record combines the core electrical, logic-capacity, packaging, and environmental characteristics with practical selection guidance, application context, and package-aware alternatives. It also highlights the distinction between the commercial-grade -4FG320C device and related lower-power or extended-temperature family members.

RFQ Kontak
XC3S1500-4FG320I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG320I

XC3S1500-4FG320I - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG320I is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 3,328 configurable logic blocks and 221 I/O sites in a 320-ball BGA package. It operates from a 1.2 V core supply and is ordered with the -4 speed grade and industrial temperature designation. The XC3S1500-4FG320I provides the logic capacity and pin count required for embedded control, parallel processing, communications, industrial automation and test-equipment designs. A field-programmable gate array, or FPGA, is a programmable digital semiconductor in which configurable logic blocks and programmable interconnect resources implement a designer's circuit after manufacture. In the product hierarchy, an FPGA is a programmable logic device, a semiconductor and an integrated circuit. Unlike a fixed-function ASIC, an FPGA permits design revisions, parallel logic implementation and system adaptation without fabricating a new custom silicon mask set. The 3,328 configurable logic blocks provide the physical foundation for combinational and sequential logic in the Spartan-3 architecture. Its 1.5 million system-gate figure describes the device's broad logic capacity, while 221 I/O sites support connections to external memory, data converters, communications transceivers and control peripherals. The 320-ball BGA package offers dense board-level connectivity for complex systems with numerous high-speed and parallel signals. The -4 portion of the ordering code identifies a specific performance grade, while the I suffix identifies the industrial temperature option. These suffixes are functionally important when replacing or upgrading an FPGA: the package, speed grade, temperature range and power configuration must all be checked against the original design. The Spartan-3 generation is established for programmable embedded systems and remains recognizable through its combination of substantial gate count, dedicated block RAM resources and configurable digital interfaces. Typical uses include industrial automation controllers, data-acquisition systems, communications infrastructure, embedded video and control platforms, and test-and-measurement instruments. The 221 available I/O sites are especially useful where the design must bridge multiple buses, retain parallel data paths or connect external memories and converters while retaining the flexibility of programmable logic. PCB implementation should prioritize the manufacturer's pinout and ball-assignment tables, power-decoupling recommendations and high-speed layout guidance. A 320-ball BGA demands careful escape routing, continuous power planes, via-in-pad or fanout-compatible construction, and adequate thermal spreading beneath the device. Verify the programmed bitstream against the exact device identifier and package before production programming. This product page combines the core device identifiers, package information, design guidance, commercial sourcing answers and qualified drop-in alternatives into one engineering-focused reference. It also distinguishes same-family replacements by speed grade, temperature designation and package configuration so engineers can identify the exact migration path for an existing Spartan-3 design.

RFQ Kontak
XC3S1500-4FG456C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG456C

XC3S1500-4FG456C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD Xilinx XC3S1500-4FG456C is a discontinued Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 logic cells, 333 user I/Os, and a 1.2 V core supply. It is packaged in a 456-ball plastic FBGA measuring 23 × 23 mm and is specified for commercial-temperature operation. The -4 designation identifies its performance speed grade. A field-programmable gate array is a programmable logic device in which digital functions are configured through programmable interconnect and logic resources. The Spartan-3 FPGA family sits within the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, dedicated input/output resources, and programmable interconnect in a single CMOS package. This architecture supports parallel signal processing, control, interface bridging, and embedded-system logic without requiring a custom ASIC. The XC3S1500-4FG456C provides 29,952 logic cells and a listed system-gate count of 1,500,000. Its 576 Kb of block RAM supports buffering, packet storage, data acquisition, and general-purpose on-chip memory. A maximum operating frequency of 630 MHz is listed for the device, while 333 user I/Os provide substantial connectivity for external memory, buses, clocks, control signals, and high-speed interfaces. The device uses 90 nm CMOS fabrication and a nominal 1.2 V core supply. Its 456-ball FBGA places hundreds of contacts beneath the device, supporting dense PCB routing and high I/O availability. The commercial version operates from 0 °C to 85 °C at the junction, making it relevant to cost-sensitive commercial equipment that does not require the broader industrial-temperature qualification associated with related suffix variants. Typical uses include industrial control systems, communications equipment, video-processing modules, embedded instruments, and consumer products requiring high logic density in a compact package. Its large I/O count is particularly useful for parallel interfaces, while block RAM can retain sampled data or packet payloads. Designs must account for the legacy Spartan-3 toolchain, configuration requirements, and the availability of newer programmable-logic devices. PCB implementation requires careful ball-grid-array layout, controlled impedance routing, multiple power rails, decoupling, and a configuration source compatible with the Spartan-3 architecture. Because this exact MPN has been discontinued, long-lived or safety-related products should confirm supply continuity and consider a pin-compatible Spartan-3L option when its electrical and configuration characteristics are acceptable. This page combines the exact XC3S1500-4FG456C ordering characteristics, package and lifecycle information, structured comparisons with pin-compatible alternatives, and practical migration guidance. It also identifies the engineering limits that matter when reusing an existing 456-ball PCB or transferring a design to a newer FPGA family.

RFQ Kontak
XC3S1500-4FG456I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG456I

XC3S1500-4FG456I - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG456I is a Spartan-3 field-programmable gate array with 29,952 logic cells, approximately 1.5 million system gates, 333 I/O sites, and a 1.2 V core supply in a 456-pin FBGA package. It is configured for industrial-temperature operation and combines programmable logic, block RAM, dedicated multipliers, and programmable I/O in one reconfigurable semiconductor. A field-programmable gate array is a digital integrated circuit whose logic, interconnect, memory, and peripheral functions can be programmed after manufacture. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and below an ASIC when development flexibility, field updates, and configurable parallel processing are more important than maximum unit cost or lowest power consumption. The Spartan-3 family targets general-purpose embedded logic, control, communication, and signal-processing systems. The XC3S1500 provides 29,952 logic cells, approximately 1.5 million equivalent system gates, 576 Kb of block RAM, and up to 333 user I/O. Its listed operating performance reaches 630 MHz, while its 1.2 V core voltage is suitable for modern FPGA board power architectures. The -4 suffix identifies the performance grade, FG456 identifies the 456-ball package, and the final I suffix denotes the industrial temperature option. Internally, the device is organized around configurable logic and interconnect resources rather than a fixed processor pipeline. Parallel modules can execute control, filtering, protocol, or arithmetic functions simultaneously, allowing one FPGA to consolidate several discrete logic devices. Block RAM supports buffering and data storage without consuming large amounts of LUT-based logic, while dedicated multipliers accelerate selected arithmetic operations. This architecture favors flexible parallel datapaths over sequential general-purpose processing. Typical uses include industrial control and automation, embedded communications, data acquisition, test equipment, video and image processing, network interface controllers, and embedded systems requiring parallel hardware acceleration. A design can assign interfaces and control functions to programmable I/O, use dedicated RAM for frame or packet buffering, and implement filters or protocol engines in parallel logic. The Spartan-3 architecture also supports field configuration updates when the system architecture permits controlled reconfiguration. The primary PCB constraint is the 456-ball FBGA footprint, whose fine pitch, dense escape routing, and via requirements need careful stack-up and signal-integrity planning. Use the manufacturer pinout, differential-pair rules, and decoupling guidance when assigning pins and laying out power, ground, clock, and high-speed interfaces. Legacy tools and device support should also be checked before beginning a new design because the Spartan-3 generation predates current FPGA families. This product record combines the exact device identity, package and logic-resource details, verified cross-reference candidates, and practical design guidance. It supports faster component identification while preserving the distinction between a genuine pin-compatible replacement and a device that merely belongs to the broader Spartan-3 family.

RFQ Kontak
XC3S1500-4FG676C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG676C

XC3S1500-4FG676C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 487 I/O, and a 1.2 V core operating voltage, supplied in a 676-ball BGA package. It is designed for applications requiring substantial configurable logic resources, parallel digital interfaces, and deterministic programmable behavior. The FPGA combines programmable logic, block RAM, dedicated DSP resources, and programmable I/O within one integrated device. A field-programmable gate array is a semiconductor device whose digital circuit is defined after manufacture. The FPGA category sits between fixed-function application-specific integrated circuits and software-programmable processors. Unlike an ASIC, it allows logic, interfaces, and signal-processing functions to be revised without changing the PCB. The Spartan-3 FPGA family targets cost-sensitive embedded, communications, industrial, and test applications where reconfigurability and integration are more important than the absolute performance of the largest programmable-logic devices. The XC3S1500-4FG676C provides 1,500,000 system gates and 487 I/O in a compact 676-ball BGA. Its 1.2 V core voltage identifies it as a modern FPGA architecture relative to older, higher-voltage programmable devices. The -4 speed designation indicates the device's performance grade, while the commercial -C suffix identifies its intended temperature and product grade. Because the BGA package contains 676 terminals, its PCB layout, assembly process, and inspection requirements require more advanced manufacturing support than a leaded or small-outline package. Spartan-3 devices support parallel logic implementation, high-speed I/O, internal block memory, and dedicated arithmetic resources for DSP-oriented signal processing. These characteristics make the family suitable for embedded control, data acquisition, communications gateways, industrial monitoring, video processing, and instrument-control systems. Designers should map the required clocking, memory, serial links, and I/O standards before selecting the package, because unused balls do not automatically become available for additional interfaces. Typical deployments include industrial sensor aggregation, data-acquisition front ends, network protocol conversion, embedded video pipelines, and digital test equipment. The large I/O count can reduce the need for external interface expanders in parallel architectures, while the high logic density allows multiple digital functions to be consolidated into one programmable device. The principal design consideration is BGA implementation. Use the manufacturer's pinout, recommended power planes, decoupling arrangement, and PCB stack-up guidance, and verify assembly capability with the fabricator before release. Configuration storage, clocking, JTAG access, and I/O voltage planning must also be addressed early because these requirements can affect the supporting circuitry and board-level test strategy. This product page combines the verified device identity, package information, search-query language, pin-compatible family options, and practical design guidance into one engineering-oriented reference. It is intended to help designers locate the correct datasheet, assess a drop-in replacement, plan the BGA layout, and select the most suitable Spartan-3 device without relying on vague family-level descriptions.

RFQ Kontak
XC3S1500-4FG676I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG676I

XC3S1500-4FG676I - 1.5M Gate Spartan-3 FPGA | AMD

AMD XC3S1500-4FG676I is a Spartan-3 field-programmable gate array with 1.5 million system gates, 29,952 logic cells, up to 487 user I/O, and a 1.2 V supply in a 676-pin BGA package. The -4 speed designation corresponds to the listed 630 MHz performance, while the I suffix identifies the industrial-temperature ordering option. A field-programmable gate array, or FPGA, is a programmable digital semiconductor used to implement control logic, signal processing, interface bridging, and embedded systems through a configurable logic and interconnect fabric. FPGAs occupy the programmable-logic portion of the integrated-circuit hierarchy and can shorten development cycles by replacing application-specific gate arrays with reconfigurable devices. The Spartan-3 architecture provides 29,952 configurable logic cells and 487 user I/O in this 676-BGA configuration. Its 1.2 V core supply and 630 MHz listed performance make it useful for demanding parallel data paths, protocol handling, instrumentation, communications, and embedded control. The package offers substantial pin and routing capacity compared with smaller FPGA packages. The XC3S1500 combines programmable logic cells, programmable I/O blocks, dedicated memory resources, internal clocking, and configurable interconnect within one device. This architecture permits parallel datapaths and deterministic control logic to coexist on the same FPGA, reducing external component count compared with a design assembled from separate logic devices. Typical uses include industrial automation, communication equipment, test and measurement, video or image processing, embedded storage systems, and high-performance controller prototypes. Designers can also use it to consolidate several fixed-function logic functions into one reconfigurable device while preserving software or configuration-based field updates. PCB implementation requires careful BGA-layout practices, including the manufacturer-recommended land pattern, multilayer board construction, controlled-impedance routing, complete power and ground planes, and decoupling close to supply pins. Configuration memory, clocking, JTAG access, I/O standards, and bank-specific voltage requirements must be planned before schematic capture. This product page combines the listed device specifications, a focused package-aware comparison, practical design guidance, and ordering information for engineers evaluating the XC3S1500-4FG676I for programmable-logic designs.

RFQ Kontak
XC3S1500-4FGG676C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FGG676C

XC3S1500-4FGG676C - 1.5M Gate Spartan-3 FPGA | AMD

AMD XC3S1500-4FGG676C is a Spartan-3 field-programmable gate array with 1.5 million system gates, 29,952 configurable logic cells, 487 I/O, and a 1.2 V core supply in a 676-ball FBGA package. The -4 designation identifies its performance grade, while the C suffix denotes the commercial temperature option. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, while its parallel configurable cells and programmable routing make it suitable for substantially more complex logic than a basic programmable device. The Spartan-3 family combines logic resources, block RAM, dedicated multipliers, and programmable I/O for embedded control, communications, industrial automation, and signal-processing systems. Key characteristics include 1.5 million system gates, 29,952 logic cells, 487 I/O, a nominal 1.2 V core voltage, and operation from 0°C to 85°C. The FGG676 package provides 676 ball-grid-array contacts in a square surface-mount footprint. Device listings also identify a 630 MHz performance figure and 90 nm fabrication technology, making this part a high-density, cost-optimized member of the Spartan-3 product family. The XC3S1500 architecture supports parallel processing through its large logic fabric and dedicated resources. Its 487 I/O provide substantial connectivity for external memories, communication transceivers, data converters, and general-purpose digital interfaces. The -4 speed grade targets designs requiring a specific performance class, while the commercial temperature range makes the device appropriate for equipment operating in controlled indoor or industrial environments without extended-temperature requirements. Typical uses include industrial control systems, network-interface equipment, video processing, instrumentation, communications infrastructure, and embedded signal-processing platforms. Its high pin count is especially useful when a design must connect multiple buses, external memories, high-speed interfaces, and control logic without requiring a larger package. The principal design trade-off is board complexity. A 676-ball FBGA demands fine-pitch assembly, careful via and escape-routing planning, and PCB layer-count evaluation. Designers should use the manufacturer package drawings and pinout information to define land patterns, power planes, decoupling, and manufacturing rules before releasing a layout. This product page combines exact catalog parameters, lifecycle information, sourcing guidance, package considerations, and same-footprint alternatives. It also highlights where speed, temperature grade, and package choice affect substitution decisions, helping engineers distinguish a true drop-in option from a merely similar Spartan-3 device.

RFQ Kontak
XC3S1500-4FGG676I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FGG676I

XC3S1500-4FGG676I - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FGG676I is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 logic cells, a -4 performance grade, and a 1.2 V supply in a 676-ball FBGA package. It combines programmable logic, block RAM, dedicated digital signal processing resources, and configurable I/O in a single monolithic device. The Spartan-3 architecture supports parallel signal processing, control, interface, and embedded-system functions without relying on a fixed logic configuration. An FPGA is a programmable logic semiconductor whose interconnect and functional blocks are configured after manufacture. Within the product hierarchy, an FPGA is a user-programmable digital integrated circuit that can implement combinational and sequential logic, arithmetic, memory, and parallel data-processing pipelines. The Spartan-3 family combines a 90 nm fabrication process with configurable logic and dedicated resources, placing it between fixed-function ASICs and more complex programmable-logic devices. The XC3S1500-4FGG676I provides 29,952 logic cells, 1,500,000 system gates, and a maximum stated operating frequency of 630 MHz. Its 1.2 V core supply and 676-pin FBGA package support dense, high-pin-count industrial and embedded designs. The -4 code identifies the device performance grade, while the I suffix identifies the temperature-grade option used in the exact ordering code. Spartan-3 devices use configurable logic blocks connected by programmable routing resources. Dedicated block RAM permits efficient data buffering, while DSP resources support multipliers and arithmetic pipelines without using large numbers of general-purpose lookup logic. Design performance depends on the selected speed grade, clocking, routing, I/O standards, memory mapping, and utilization, so the 630 MHz figure should not be interpreted as a guaranteed frequency for every arbitrary design. Typical uses include industrial automation, instrumentation, communications infrastructure, embedded control, video and image processing, networking equipment, and test-and-measurement systems. Its 29,952 logic cells and 676-ball package are appropriate for designs requiring substantial parallel logic, multiple interfaces, and moderate on-chip storage. Related programmable logic devices can be considered when a design requires larger fabric, embedded processors, advanced I/O, or a newer technology node. PCB implementation requires careful power planning, decoupling, BGA escape routing, and thermal analysis. The 676-ball FBGA footprint demands fine-pitch assembly capability, and every power ball or group must be connected according to the package data. Signal-integrity and timing closure also depend on correct I/O standards, controlled-impedance routing, clock topology, and complete timing constraints. This page combines exact device identification, package and technology characteristics, structured alternatives, application guidance, and PCB-focused engineering considerations. It also distinguishes directly orderable suffix variants from broader Spartan-3 options and distinguishes true pin-compatible replacements from parts that require a redesigned footprint.

RFQ Kontak
XC3S1500-5FG320C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-5FG320C

XC3S1500-5FG320C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-5FG320C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 logic cells, and up to 221 I/O in a 320-pin fine-pitch BGA package. The device operates from a 1.2 V core supply, uses 90 nm process technology, and is offered in the -5 performance grade. Its architecture combines configurable logic, dedicated memory resources, programmable I/O, and embedded hard multipliers, making it suitable for digital control, interface, signal-processing, and embedded-system designs. A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where a CPLD provides comparatively simpler fixed-capacity structures while an FPGA offers substantially greater logic density, routing flexibility, and signal-processing resources. The Spartan-3 family occupies the middle ground between small CPLDs and larger high-end FPGAs, targeting cost-sensitive designs that still require considerable parallelism and configurable peripherals. The XC3S1500-5FG320C provides 29,952 logic cells, 1,500,000 system gates, and 221 I/O. Its 90 nm fabrication supports a core supply of 1.2 V, while the -5 suffix identifies its performance grade. The 320-pin FBGA package reduces lead pitch and provides a compact implementation for systems requiring numerous board connections. These characteristics allow one package to carry control logic, memory interfaces, serial links, parallel buses, and arithmetic functions rather than requiring several separate programmable devices. The programmable architecture supports parallel datapaths that can improve throughput through hardware pipelining and resource replication. Designers can assign logic to look-up tables, connect it through programmable routing, and instantiate dedicated block RAM or multiplier resources when regular logic would consume excessive area or power. Performance is design-dependent because routing congestion, external memory speed, I/O standards, clocking, and tool constraints influence the final clock rate. The 725 MHz figure associated with this device family should therefore not be interpreted as a guaranteed system frequency for every design. Typical uses include industrial automation controllers, video-processing pipelines, communication gateways, data-acquisition systems, and embedded instruments. The 221 available I/O are valuable for parallel sensor interfaces, memory buses, control signals, and external converters. Because the FPGA can execute several operations concurrently, it can implement protocol conversion, filtering, buffering, and control functions in parallel. This reduces reliance on multiple processors when deterministic operation and direct hardware interaction are important. PCB implementation requires careful attention to the fine-pitch BGA footprint, power-plane geometry, via distribution, and ball-assignment constraints. Decoupling and multiple power rails must follow the manufacturer’s pinout and reference guidance. Signal integrity also depends on controlled-impedance routing for clocks and high-speed interfaces. Before committing a layout, engineers should generate the physical constraints and perform stackup-aware signal-integrity analysis rather than treating the compact package as a conventional fine-pitch BGA breakout task. This page combines device specifications, package and lifecycle information, qualification of same-footprint alternatives, parameter comparisons, and practical PCB-design guidance. The alternatives listed are restricted to pin-compatible Spartan-3 package variants, while unavailable technical details are clearly marked for datasheet review. This engineering-focused synthesis helps buyers compare migration choices while keeping board-level compatibility and timing closure as the primary decision criteria.

RFQ Kontak
XC3S1500-5FG456C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-5FG456C

XC3S1500-5FG456C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-5FG456C is a Spartan-3 field-programmable gate array with approximately 1.5 million system gates, 29,952 configurable logic cells, 333 I/O sites, and a maximum clock frequency of 725 MHz. It is packaged in a 23 x 23 mm, 456-ball plastic BGA and operates from a nominal 1.2 V core supply, with a 1.14 V to 1.26 V core-voltage range. The commercial-grade -5 suffix supports operation from 0°C to 85°C. A field-programmable gate array is a programmable-logic semiconductor whose configurable logic blocks, programmable interconnect, block RAM, and dedicated I/O resources are configured after manufacture. Within the product hierarchy, an FPGA sits above simple programmable logic devices and provides parallel hardware implementation for digital control, signal processing, communications, and interface functions without relying on a general-purpose processor for time-critical operations. The XC3S1500 combines 29,952 configurable logic cells with 3,328 configurable logic blocks and approximately 1.5 million system gates. Its 333 I/O sites support board-level connections, while 432 Kbits of block RAM provide dedicated on-chip storage. The listed 725 MHz figure represents the maximum device operating speed used for timing-oriented designs; actual interface performance depends on the selected clock, I/O standard, routing, logic depth, and timing constraints. The device uses 90 nm CMOS fabrication and a 1.2 V core architecture. Multiple dedicated I/O banks allow separate voltage domains and selectable I/O standards, making careful bank planning important in mixed-speed designs. Because the FPGA is assembled in a fine-pitch 456-ball BGA, its power delivery, decoupling, via arrangement, and thermal performance depend heavily on multilayer PCB layout and assembly quality. Typical uses include industrial control, data acquisition, communications gateways, embedded video processing, instrumentation, and legacy interface consolidation. The 333 I/O sites are particularly useful for parallel buses, digital converters, memory interfaces, and multiple low-speed peripherals, while embedded block RAM supports packet buffering, FIFO structures, and local data storage. For new designs, verify that the Spartan-3 device, associated synthesis tools, and available intellectual-property cores remain suitable for the production program. An FPGA replacement should be checked for pin compatibility, supported I/O standards, memory resources, configuration interface, timing margins, and thermal performance rather than being selected from capacity alone. This page combines device specifications, lifecycle guidance, drop-in replacement analysis, application-oriented design notes, and a practical comparison framework. It helps engineers identify whether the exact XC3S1500-5FG456C fits a legacy 456-ball design and which parameters must be revalidated before production migration.

RFQ Kontak
XC3S1500-5FG676C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-5FG676C

XC3S1500-5FG676C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD/Xilinx XC3S1500-5FG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 configurable logic cells, and a 676-ball FBGA package. The device operates from a 1.2 V core supply, is manufactured on a 90 nm process, and is specified in the -5 speed grade with a stated performance level of 725 MHz. A field-programmable gate array, or FPGA, is a semiconductor device containing programmable logic, routing, input/output, and memory resources. FPGA design flow combines hardware description languages, synthesis, place-and-route tools, timing analysis, and device programming. The Spartan-3 family occupies the FPGA category within programmable logic devices and is positioned for designs requiring substantial parallel processing in a single package. The XC3S1500 device provides 29,952 logic cells, 589,824 RAM bits, and 487 I/O positions according to its product listing. Its 676-ball surface-mount package supports dense connections among the configurable fabric, dedicated memory, and external circuitry. The -5 designation identifies the performance grade, while the C suffix identifies the commercial temperature class. Spartan-3 devices use a configurable architecture rather than a fixed logic function, allowing designers to implement parallel datapaths, state machines, interfaces, and control systems in one device. The 90 nm fabrication process and 1.2 V core supply place the component within the technology and power characteristics of the Spartan-3 generation. Performance also depends on the selected design, package speed characteristics, memory interface, and external circuitry. Typical applications include industrial automation, communications infrastructure, instrumentation, embedded control, video processing, and general-purpose digital signal processing. The large logic-cell count and 487 I/O positions are useful when a design must combine parallel computation with numerous external interfaces, while the integrated RAM resources support buffers, lookup tables, and moderate data-storage functions. A critical design step is power planning because FPGA configuration and dynamic switching activity can create substantial board-level power demand. Decoupling, supply sequencing, clock integrity, and thermal management should be reviewed against the Spartan-3 design guidance. Because the -5 part is a -5 speed-grade device, timing closure should use the appropriate device speed file and the worst applicable operating conditions. This product record combines the exact ordering code with package, logic-resource, process, and speed information, alongside drop-in same-family options, application guidance, and engineering-focused comparison data that help shorten component identification and design-review work.

RFQ Kontak
XC3S1500-5FGG676C - 1.5M Gate Spartan-3 FPGA | AMD Xilinx
XC3S1500-5FGG676C

XC3S1500-5FGG676C - 1.5M Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S1500-5FGG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 configurable logic elements, 487 user I/O, and 589,824 bits of block RAM in a 676-pin fine-pitch ball grid array. It operates from a 1.2 V supply with a documented 1.14 V to 1.26 V operating range and uses 90 nm FPGA process technology. The device supports operation up to 725 MHz as listed for this configuration. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable input/output blocks, embedded block RAM, dedicated arithmetic resources, and programmable interconnect. Within the product hierarchy, this device belongs to the Spartan-3 FPGA family, which sits between basic fixed-function logic and higher-density programmable-logic families. Engineers use FPGAs for parallel data processing, protocol bridging, signal generation, image processing, and embedded control where field-updatable hardware is valuable. The XC3S1500 configuration provides 487 user I/O for high-speed external interfaces, while its 589,824 bits of block RAM support buffering, packet storage, and lookup functions. The -5 speed designation identifies the 725 MHz performance listing associated with this part number. The FG package suffix denotes the 676-pin fine-pitch BGA form used by the Spartan-3 family, and the trailing C identifies the commercial temperature grade. The 676-pin package makes this device suited to dense boards with substantial routing requirements. A 1.2 V core requires careful power-plane design, local decoupling, and attention to simultaneous switching noise. Because the package contains hundreds of connections, PCB design should follow the AMD Xilinx footprint, pinout, and design-assistance guidance rather than relying on generic BGA conventions. Typical uses include telecommunications line-card and interface logic, industrial data acquisition, video and image pipelines, storage controllers, and embedded signal-processing systems. The large I/O count is particularly useful for parallel buses, multiple high-speed links, and designs that combine several external interface standards. When planning a new design, check the Spartan-3 product status before committing the footprint. For an existing XC3S1500 design, preserve the exact power, decoupling, and routing architecture because FPGA configuration and I/O behavior are tightly coupled to the package and reference design. This page consolidates capacity, package, sourcing, and replacement information to support engineering review.

RFQ Kontak
XC3S1600E-4FG400I - Spartan-3E FPGA, 33192 Logic Cells | AMD Xilinx
XC3S1600E-4FG400I

XC3S1600E-4FG400I - Spartan-3E FPGA, 33192 Logic Cells | AMD Xilinx

The AMD Xilinx XC3S1600E-4FG400I is a Spartan-3E field-programmable gate array with 33,192 logic cells, 1.6 million equivalent gates, 304 user I/O, and a 572 MHz maximum clock frequency in a 400-ball FBGA package. It operates from a 1.14 V to 1.26 V core supply and uses 90 nm CMOS technology. The -4 speed grade and I industrial temperature designation place it between the -1 and -6 performance options of the Spartan-3E family. An FPGA is a reprogrammable semiconductor containing configurable logic blocks, programmable interconnect, and input/output blocks. Its internal architecture allows digital designs to be implemented as parallel hardware rather than sequential software. The Spartan-3E family is positioned between low-cost CPLDs and larger high-end FPGAs, making it suitable for industrial control, communications, instrumentation, embedded video, and prototype systems that require substantial logic density without the resources of the largest device families. The XC3S1600E-4FG400I provides 3,688 configurable logic blocks according to the family documentation, organized into four slices per CLB. Dedicated block RAM and distributed RAM support buffering, lookup tables, FIFO structures, and data-plane designs. The device also includes digital clock managers, programmable I/O standards, and dedicated clock and configuration resources. Its 304 I/O provide substantial connectivity for external memory, buses, transceivers, and industrial interfaces. The 400-ball FBGA package requires a multilayer PCB with a carefully controlled escape-routing area, power planes, and high-speed routing discipline. The 1.2 V core rail and the package’s thermal characteristics must be evaluated against the system’s clock, I/O, and switching activity. Configuration loading, JTAG access, and bitstream compatibility are central considerations when replacing or upgrading an existing Spartan-3E board. Typical designs include industrial automation controllers, networked measurement equipment, data-acquisition systems, video-processing prototypes, embedded storage controllers, and communications infrastructure. Because the device is a mature Spartan-3E member, long-lived industrial programs can benefit from stable architecture and broad software-tool support, while new designs must confirm current availability and lifecycle commitments before layout release. This page summarizes the technical characteristics, practical design notes, package requirements, and drop-in replacement options for the XC3S1600E-4FG400I in one place. It is intended to accelerate schematic review, PCB planning, sourcing, and legacy design migration.

RFQ Kontak
XC3S1600E-4FG484C - 1.6M-Gate Spartan-3E FPGA | AMD
XC3S1600E-4FG484C

XC3S1600E-4FG484C - 1.6M-Gate Spartan-3E FPGA | AMD

AMD XC3S1600E-4FG484C is a Spartan-3E field-programmable gate array with 1.6 million equivalent logic gates, 33,192 logic cells, 3,688 configurable logic blocks, and a 572 MHz maximum clock frequency. It is manufactured in 90 nm CMOS technology, operates from a 1.2 V core supply, and is supplied in a 484-pin FBGA package measuring 23 x 23 mm. The device provides 376 user I/O and is intended for programmable-logic, embedded-processing, communications, and industrial-control systems. A field-programmable gate array is a programmable-logic semiconductor in which configurable logic blocks, programmable interconnect, and dedicated I/O resources implement a digital system. In the product hierarchy, an FPGA belongs to programmable logic devices, complements application-specific integrated circuits, and provides shorter development cycles than a fully custom ASIC. The Spartan-3E family combines relatively high logic density with a large selection of I/O and embedded resources for cost-sensitive embedded designs. The XC3S1600E-4FG484C offers 33,192 logic cells distributed across 3,688 CLBs, corresponding to an advertised 1.6 million equivalent gates. Its 376 I/Os support connection to external memory, control signals, and parallel or serial peripherals. A 572 MHz clock rating supports demanding datapaths, while the -4 suffix identifies a four-nanosecond speed grade. The C suffix identifies the commercial temperature option. The 90 nm CMOS Spartan-3E architecture provides programmable logic, block RAM, dedicated multipliers, clock-management resources, and general-purpose I/O within one device. Its 484-ball FBGA footprint offers high I/O density for compact systems, but it also requires careful escape-routing, via-in-pad awareness, and thermal-management planning. The package has a 1.0 mm ball pitch and a stated height of 2.60 mm. Typical applications include industrial control and automation, communications infrastructure, embedded video processing, instrumentation, data acquisition, and general-purpose interface consolidation. The 376 available I/Os are particularly useful for designs connecting external processors, memory devices, ADC or DAC components, transceivers, and custom logic. An FPGA implementation can also consolidate several fixed-function chips into one programmable subsystem while preserving field-update flexibility. Designers should assign every ball, including power and ground, directly from the manufacturer package data and preserve the recommended power and ground distribution network. Because a 484-BBGA has dense escape routing, use a PCB stack-up and via strategy compatible with a 1.0 mm pitch, and confirm assembly, inspection, and rework capabilities before committing to the layout. This page combines the device architecture, package constraints, drop-in replacement distinctions, and application-oriented design guidance needed to evaluate the XC3S1600E-4FG484C for an existing 484-FBGA Spartan-3E design.

RFQ Kontak
XC3S1600E-4FG484I - 1.6M Gate Spartan-3E FPGA | AMD Xilinx
XC3S1600E-4FG484I

XC3S1600E-4FG484I - 1.6M Gate Spartan-3E FPGA | AMD Xilinx

The AMD Xilinx XC3S1600E-4FG484I is a Spartan-3E family Field Programmable Gate Array (FPGA) delivering 1.6 million system gates, 33,192 logic cells, and 376 user I/Os in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package. Fabricated on a 90nm CMOS process with a 1.2V core supply, this industrial-temperature device (I suffix, -40C to +100C) runs at speed grade -4 and integrates 29,504 registers and 648 Kbits (663,552 bits) of distributed and block RAM. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs) and programmable interconnects that the designer configures in the field via HDL (VHDL/Verilog). Within the programmable logic hierarchy, the FPGA sits above CPLDs in capacity and sits alongside ASSPs as a core digital logic implementation platform for system-on-chip prototyping and production designs. Key features of the XC3S1600E include 3,688 CLBs/LABs providing high logic density, 572MHz maximum toggle capability supported by dedicated digital clock managers (DCMs), and abundant block RAM for FIFOs and dual-port memories. The 376 I/Os support multiple I/O standards with configurable banks, enabling wide data-path interfaces. Architecturally, the Spartan-3E platform uses a 4-input look-up table (LUT) based fabric with dedicated carry logic, multiplier blocks, and DCMs for clock conditioning - well suited to cost-sensitive control, glue logic, and DSP-lite tasks. The 90nm process keeps core power low at 1.2V while retaining robust routing flexibility. Typical applications include industrial control and automation, embedded system prototyping, data acquisition glue logic, motor control interfaces, and communications line cards. The wide 376-I/O budget makes it a natural fit for bus bridging and parallel-to-serial adaptation. A key design consideration: the Spartan-3E family is mature, so plan configuration via a platform Flash PROM (such as XCF-series) and verify 1.2V core, 3.3V auxiliary, and I/O bank rails meet sequencing guidance in the datasheet. This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak