Mga Produkto (46,000+)

XC3S2000-4FG676I - 2M Gate Spartan-3 FPGA | AMD
XC3S2000-4FG676I

XC3S2000-4FG676I - 2M Gate Spartan-3 FPGA | AMD

The AMD XC3S2000-4FG676I is a Spartan-3 field-programmable gate array with 2,000,000 system gates, 46,080 flip-flops, 489 user I/Os, and a 676-ball BGA package. The device operates with a 1.2 V core voltage and targets industrial-temperature equipment rated for -40°C to +100°C. An FPGA is a semiconductor device whose digital logic, interconnect, and peripheral functions are configured after manufacture. The Spartan-3 family combines configurable logic blocks, block RAM, dedicated multipliers, programmable I/O, and embedded hardwired resources. This hierarchy places the XC3S2000 above a programmable-logic device and within the broader field-programmable gate array category, providing substantial parallel processing capacity for embedded control, signal processing, communications, and interface consolidation. Key device attributes include 2,000,000 system gates, 737,280 configurable logic cells, 46,080 flip-flops, and 489 user I/Os. The -4 suffix denotes the device performance grade, while the I suffix identifies the industrial temperature range. A 1.2 V core supply supports lower-voltage logic operation, while the large I/O count allows a single FPGA to bridge multiple external buses, displays, sensors, and communication interfaces. The Spartan-3 architecture is implemented on 90 nm CMOS technology and combines programmable logic with dedicated arithmetic resources. The 630 MHz maximum figure associated with this device should be treated as an advertised device-speed parameter rather than a guarantee of performance for every implemented design. Actual Fmax depends on logic depth, routing constraints, memory usage, clocking, and the selected I/O standard. Typical applications include industrial automation, video display control, communications infrastructure, instrumentation, embedded storage interfaces, and high-density programmable logic systems. The 489 available user I/Os are particularly useful when consolidating control logic, data acquisition channels, serial links, and external memory interfaces into one device. The primary design consideration is the 676-ball BGA layout. Use the manufacturer package drawing and pinout tables to assign power, ground, configuration, clock, and user I/O balls. Confirm the PCB stack-up, escape-routing rules, differential-pair geometry, power-plane segmentation, and decoupling strategy before releasing the layout because these requirements cannot be inferred from the catalog package name alone. This page organizes the device identity, verified technical attributes, package characteristics, practical design guidance, and application-specific selection context. It also distinguishes pin-compatible Spartan-3 choices that retain the same 676-ball footprint while helping engineers assess temperature grade, lead-free construction, and sourcing constraints.

RFQ Kontak
XC3S2000-4FG900I - 2M-Gate Spartan-3 FPGA | AMD Xilinx
XC3S2000-4FG900I

XC3S2000-4FG900I - 2M-Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S2000-4FG900I is a Spartan-3 field-programmable gate array with 2,000,000 system gates, 46,080 logic cells, 565 I/O, and a 1.2 V supply in a 900-ball BGA package. The -4 speed designation places it in the device family’s -4 performance grade, while the I suffix identifies the industrial temperature option. A field-programmable gate array is a programmable digital semiconductor in which configurable logic blocks, programmable interconnect, and input/output resources implement digital systems. An FPGA belongs to the broader hierarchy of programmable logic devices, alongside CPLDs, and provides substantially greater logic capacity. The Spartan-3 architecture combines configurable logic, block RAM, dedicated DSP resources, programmable I/O, and on-chip support for clocking and configuration. The XC3S2000-4FG900I’s headline resources are 2,000,000 system gates, 46,080 logic cells, 565 I/O, and a 900-ball BGA package. Its 1.2 V core supply suits low-voltage digital systems where board-area efficiency and high I/O density are priorities. The large ball-grid array also supports dense connections between programmable resources and external circuitry without relying on a larger leaded package. Within the Spartan-3 family, the -4 speed grade provides a defined balance between logic performance and device organization. Exact maximum clock rates depend on the selected design, I/O standard, speed grade, timing constraints, and tool version. Because an FPGA’s usable performance is determined by the routed critical path rather than a single headline frequency, timing closure must be completed with the appropriate synthesis and implementation constraints. Typical uses include network-interface control, industrial automation, communications equipment, embedded video processing, instrumentation, and general-purpose digital signal-processing systems. A design requiring parallel interfaces, substantial logic density, moderate-to-high-speed serial links, and deterministic embedded control can benefit from combining programmable logic, block RAM, DSP, and dedicated I/O in one device. A 900-ball BGA requires careful PCB planning, including a multilayer board with controlled-impedance routing, via access beneath the device, adequate power and ground distribution, and assembly-process compatibility. Designers should also verify configuration logic, memory-interface topology, I/O standards, voltage tolerances, thermal performance, and pin constraints in the manufacturer datasheet before schematic capture and layout release. This product page consolidates the device’s principal architecture, package, and application information with engineering-focused comparison data and design guidance. It is intended to help engineers confirm fit, plan the PCB, and assess Spartan-3 alternatives without treating package similarity alone as proof of drop-in compatibility.

RFQ Kontak
XC3S2000-5FG676C - 2M Gate Spartan-3 FPGA, 676-BGA | AMD
XC3S2000-5FG676C

XC3S2000-5FG676C - 2M Gate Spartan-3 FPGA, 676-BGA | AMD

The AMD (Xilinx) XC3S2000-5FG676C is a Spartan-3 field-programmable gate array (FPGA) built on a 90 nm CMOS process, delivering 2,000,000 system gates in a 676-ball FCBGA (FG676) package with 489 user I/O. What is an FPGA? A field-programmable gate array is a reconfigurable digital integrated circuit whose logic and interconnect are configured by a bitstream rather than fixed in silicon. A device such as the XC3S2000 sits in the hierarchy of programmable logic devices: FPGA as the core category, then programmable logic, then digital logic ICs, then semiconductors. Because the configuration is stored in static CMOS latch memory, the same board can be re-programmed in the field to change functionality, shorten NRE, and consolidate several discrete CPLD and glue-logic parts into one device. Key features of this device include the -5 speed grade, a 1.2 V core supply, 489 user I/O in the FG676 package, and a commercial (C) temperature grade. The Spartan-3 architecture combines configurable logic blocks (CLBs) with embedded distributed RAM, dedicated block RAM for on-chip storage, and a programmable interconnect with dedicated routing resources such as RAM16 and DSP48E1 arithmetic slices. Multipliers, FIFOs, and small state machines can therefore be consolidated into a single silicon device. The FG676 package is a 27 x 27 mm flip-chip BGA with a 1.0 mm ball pitch, and the device is offered in both tin-lead (FG) and lead-free (FGG) ball finishes within the same Spartan-3 family. Spartan-3 devices are supported by the ISE and ISE Design Suite-style tool flows, so existing Spartan-3 bitstreams, constraints, and board-level footprints remain reusable across the family. Typical applications include industrial control and instrumentation, video and image processing pipelines, communications and network interface line cards, test and measurement equipment, and embedded system glue logic around microprocessors. The large I/O count and block RAM make the XC3S2000 well suited to multi-channel data acquisition and protocol bridging designs. When laying out a board around the FG676 package, route power planes with careful via stitching, keep the configuration pins accessible for multi-boot or JTAG use, and provide clean, terminated clock inputs with low jitter because most high-speed designs depend on PLL quality. Note that the Spartan-3 family is a mature, legacy platform: verify current tool and availability status before starting a new production design. This page consolidates package, pin-count, and I/O details, drop-in package-compatible alternatives, and practical design notes that are not gathered in one place in the manufacturer datasheet, helping engineers evaluate a migration path quickly.

RFQ Kontak
XC3S200A-4FG320C - 200K Gate Spartan-3A FPGA | AMD Xilinx
XC3S200A-4FG320C

XC3S200A-4FG320C - 200K Gate Spartan-3A FPGA | AMD Xilinx

AMD Xilinx XC3S200A-4FG320C is a Spartan-3A field-programmable gate array (FPGA) with 200,000 system gates, 4,032 logic cells, 294,912 RAM bits, and 248 user I/O in a 320-BGA surface-mount package. The -4 designation identifies the performance speed grade, while the commercial-temperature C suffix identifies the specified commercial grade. A Spartan-3A FPGA is a programmable digital semiconductor used to implement logic, control, signal processing, communications, and embedded-system functions in parallel hardware. It belongs to the hierarchy FPGA and CPLD > programmable logic device > digital integrated circuit > semiconductor. Unlike a fixed-function microcontroller, the XC3S200A-4FG320C combines configurable logic blocks, block RAM, programmable I/O, and dedicated hard resources on one device. The device provides 448 logic blocks, according to the product listing, alongside the 4,032 logic cells and 294,912 total RAM bits. Its 248 I/O provide substantial board-level connectivity for buses, control signals, counters, serial links, and external memory interfaces. The 320-BGA package also supports compact, high-density PCB layouts, although ball-grid construction complicates prototype assembly and inspection. Spartan-3A devices combine programmable logic with selectable DSP resources for arithmetic-heavy designs and dedicated block memory for buffers, tables, and packet data. Configuration data determines the implemented circuit, allowing one FPGA family to serve many product variants. Engineers must still account for pin constraints, supported I/O standards, clocking resources, configuration memory, and timing when translating a design into the physical device. Typical applications include industrial control, video and image processing, communications infrastructure, test equipment, consumer electronics, embedded signal processing, and cost-sensitive high-volume products. The 200,000-gate Spartan-3A device is especially appropriate when parallel hardware performance and programmable logic density are more important than using a very large FPGA with unnecessary resources. A critical design consideration is that the FG320 package is not a direct pin match for smaller Spartan-3A packages such as FTG256 or VQG100. Maintain a conservative separation between clock, configuration, serial interface, and sensitive I/O routing, and verify every selected pin against the manufacturer pin-description table. Prototype inspection, X-ray analysis, or a compatible BGA assembly process is also needed when solder joints cannot be visually inspected. This page combines the core Spartan-3A architecture facts, package and I/O constraints, grade comparisons, and practical migration guidance. It is intended to help engineers determine whether the XC3S200A-4FG320C remains appropriate for an existing design and how to evaluate pin-compatible options without overlooking speed-grade, temperature-grade, lifecycle, or PCB differences.

RFQ Kontak
XC3S200A-4FG320I - 294912-Logic-Cell Spartan-3A FPGA | AMD
XC3S200A-4FG320I

XC3S200A-4FG320I - 294912-Logic-Cell Spartan-3A FPGA | AMD

AMD XC3S200A-4FG320I is a Spartan-3A field-programmable gate array with 294,912 logic cells, 4,032 configurable logic blocks, 248 user I/Os, and a -4 speed grade, packaged in a 320-ball FBGA. The device is designed for cost-sensitive embedded systems requiring high programmable logic density, extensive I/O, and reconfigurable hardware architecture. Its industrial-grade ordering designation supports use in equipment operating across extended industrial temperature conditions. A field-programmable gate array, or FPGA, is a programmable-logic semiconductor whose digital functions are defined after fabrication. By combining configurable logic blocks, programmable interconnect, memory resources, and programmable I/O blocks, an FPGA replaces combinations of fixed-function logic devices with one reconfigurable integrated circuit. Within the product hierarchy, the XC3S200A is a Spartan-3A FPGA, a member of the Spartan family of programmable logic devices. Key features include support for 26 I/O standards, a Device DNA serial number, enhanced MultiBoot operation with a watchdog timer, dual power-management modes, and Dynamic Input Delay for data-to-clock centering. These features make the device suitable for embedded control, communications, industrial automation, instrumentation, video processing, and general-purpose logic consolidation. The 248 user I/Os provide extensive connectivity to external controllers, memories, transceivers, sensors, and display or communication peripherals. The Spartan-3A architecture supports parallel programmable logic and dedicated input and output resources. Dynamic Input Delay allows timing-driven delay adjustment on selected input paths, supporting precise capture of data relative to a clock. Device DNA provides a device-specific identifier useful for configuration control, asset identification, and production traceability. MultiBoot with watchdog monitoring helps FPGA-based products maintain known configuration behavior while enabling controlled startup transitions. Typical applications include industrial controllers, data-acquisition systems, communications infrastructure, video-processing modules, embedded networking equipment, and compact control platforms. Its 320-ball FBGA package supports dense board routing and high I/O availability, but it requires careful escape-routing, power-plane, via, and assembly planning. The 320-ball land pattern also makes thermal management and PCB assembly quality important in space-constrained industrial equipment. Designers should use the AMD DS529 family data sheet and the device-specific pinout information to assign power, ground, configuration, clock, and user I/O connections. Validate every power rail against the selected Spartan-3A device configuration, preserve the required decoupling topology, and route configuration signals according to the documented startup requirements. PCB redesign is necessary if the current design does not use the exact 320-ball FBGA footprint. This product page combines the verified device identity, package characteristics, Spartan-3A feature set, sourcing guidance, comparison information, and practical implementation considerations. It also identifies where timing, pin-level, and lifecycle details must be confirmed against the authoritative family documentation before a new PCB or production release is approved.

RFQ Kontak
XC3S200A-4FGG320I - 200K Spartan-3A FPGA | AMD
XC3S200A-4FGG320I

XC3S200A-4FGG320I - 200K Spartan-3A FPGA | AMD

The AMD/Xilinx XC3S200A-4FGG320I is a Spartan-3A FPGA with 294,912 system gates, 4,032 logic cells, 248 user I/Os, and a 320-BGA package. The device is offered in the -4 speed grade and industrial temperature option, making it suitable for industrial control, embedded processing, communications, instrumentation, and other logic-intensive systems requiring a moderately sized FPGA. A field-programmable gate array, or FPGA, is a programmable semiconductor containing configurable logic blocks, input/output blocks, and programmable interconnect. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic behavior, interface assignments, and timing-related implementation to be changed through a configuration bitstream. The Spartan-3A family occupies the FPGA segment of the broader programmable-logic hierarchy and provides a practical balance of logic density, I/O capability, and device flexibility. The XC3S200A-4FGG320I provides 200K-equivalent logic capacity, 4,032 logic cells, 248 I/Os, and a listed operating frequency of 667 MHz. Its 320-BGA package supports dense PCB integration for designs requiring substantial signal connectivity. The -4 suffix identifies the performance grade, while the industrial-temperature ordering option supports operation from -40°C to +100°C according to the manufacturer family data and product listings. The Spartan-3A architecture uses configurable logic blocks containing lookup tables and storage elements, with input/output blocks controlling the flow of data between package pins and internal logic. This architecture supports parallel logic, state machines, control functions, data acquisition, and interface bridging. The 90 nm process information associated with the XC3S200A family identifies this as an established Spartan generation rather than a low-power or high-performance system-on-chip platform. Typical designs include industrial automation controllers, programmable logic instruments, communication interfaces, video timing and control, test equipment, embedded control systems, and general-purpose prototyping platforms. The 248 available I/Os make the device especially useful when a design must combine substantial internal logic with multiple external buses, control signals, serial links, and status or diagnostic outputs. When planning a PCB, use the exact 320-BGA land pattern, ball map, and power-decoupling guidance in the manufacturer data sheet rather than treating the package designation as a generic BGA footprint. Confirm the configuration mechanism, JTAG connections, startup behavior, supported I/O standards, and clock requirements before release. If a replacement is needed, verify both the package ballout and the configuration bitstream compatibility, because a device with the same family name may differ in speed grade, temperature grade, or package ballout.

RFQ Kontak
XC3S200A-4FT256C - 4032-Cell Spartan-3A FPGA | AMD Xilinx
XC3S200A-4FT256C

XC3S200A-4FT256C - 4032-Cell Spartan-3A FPGA | AMD Xilinx

The AMD Xilinx XC3S200A-4FT256C is a Spartan-3A field-programmable gate array built on a 90 nm CMOS process and packaged in a 256-ball FT BGA. The device provides 4032 logic cells, 448 configurable logic blocks, approximately 200000 system gates, and 195 user I/O. Its -4 speed designation places it in the 280 MHz performance class, while the device is listed with a maximum operating frequency of 667 MHz for suitable clock conditions. A field-programmable gate array is a reconfigurable digital integrated circuit whose logic, memory, signal processing, and I/O resources are configured after manufacture. Within the semiconductor hierarchy, an FPGA is a programmable logic device, while the Spartan-3A family occupies the low-to-medium density segment of the Xilinx product portfolio. It is intended for embedded systems requiring parallel processing, deterministic control, dedicated interfaces, or hardware-assisted data handling without the cost of a large application-specific integrated circuit. Key features include support for 26 single-ended and differential I/O standards, including TMDS, PPDS, SSTL3 Class I and Class II, and full hot-swap compatibility. The 195 user I/Os make the part suitable for bridging external memory, programmable logic controllers, communications links, display interfaces, and general-purpose digital control. The Spartan-3A architecture also supports interface intellectual property for PCI, PCI Express, USB, FireWire, CAN, SPI, and I2C designs. The XC3S200A-4FT256C operates from a 1.2 V core supply and is specified for the commercial temperature range of 0 °C to 85 °C. Its 256-ball package measures 17 mm by 17 mm and uses a square ball-grid layout. Configuration and programming are handled through the dedicated configuration interface described in the Spartan-3A family documentation, allowing the same hardware platform to be reprogrammed for multiple bitstreams. Typical applications include industrial control and data-acquisition systems, video processing, network-interface adapters, industrial Ethernet equipment, display controllers, communications modules, and embedded storage systems. The combination of 4032 logic cells, 195 I/Os, and a 256-ball package provides substantial integration in a compact surface-mount footprint. A key design consideration is that legacy FPGA availability and lifecycle status can constrain new production designs. Verify current sourcing, configuration-file support, toolchain compatibility, and the exact ball-grid layout before committing a board revision to this device. This page also consolidates technical specifications, drop-in alternatives, application guidance, and design notes for faster engineering evaluation.

RFQ Kontak
XC3S200A-4FT256I - 200K Spartan-3A FPGA | AMD Xilinx
XC3S200A-4FT256I

XC3S200A-4FT256I - 200K Spartan-3A FPGA | AMD Xilinx

The AMD Xilinx XC3S200A-4FT256I is a Spartan-3A field-programmable gate array with 4,032 configurable logic cells, approximately 200,000 logic gates, 195 user I/Os, and 294,912 RAM bits in a 256-ball FT256 BGA package. It uses 90 nm fabrication technology, operates from a 1.2 V core, and is identified with a 667 MHz maximum device speed grade. A field-programmable gate array is a programmable logic device whose digital functions are established by loading a configuration bitstream rather than permanently connecting transistors. The Spartan-3A family belongs to the FPGA hierarchy, combining programmable logic, dedicated memory resources, digital signal-processing capability, and general-purpose I/O. This makes the device suitable for designs that benefit from hardware parallelism, reconfigurability, short development cycles, and integration of multiple digital functions on one device. The XC3S200A provides 4,032 logic cells and 195 user I/Os, providing substantial connectivity for control logic, interfaces, arithmetic pipelines, and embedded state machines. Its 294,912 RAM bits provide dedicated block storage without consuming the same resources needed for general combinational logic. The -4 suffix denotes a performance speed option, while the I suffix identifies the industrial temperature grade. The 256-ball FT256 package supports compact, high-density board layouts through ball-grid-array interconnect. The XC3S200A architecture is based on 90 nm CMOS technology and a 1.2 V core supply. Its logic is organized into configurable slices containing combinational and sequential resources, while dedicated block RAM supports higher-density storage than distributed RAM alone. Dedicated multipliers and digital signal-processing resources can accelerate filtering, transforms, and fixed-point arithmetic when the design and synthesis toolchain use them appropriately. Typical applications include industrial control, communications interfaces, data acquisition, instrumentation, embedded signal processing, and general-purpose digital prototyping. Its 195 I/Os are useful for parallel sensor interfaces, display or control peripherals, high-speed communication logic, and system bus coordination. The FPGA architecture is especially helpful where parallel processing, reconfigurable logic, or deterministic digital control must be consolidated into a compact implementation. A key design consideration is the complete Spartan-3A power, configuration, clocking, and decoupling plan. Board design must provide the specified core and I/O supplies, a valid configuration path, compatible clocking, and clean power delivery to the FT256 package. Because the device is a mature programmable platform, toolchain version and legacy bitstream compatibility should also be confirmed before an update to production. This page consolidates the device identity, package details, application guidance, design considerations, and technically constrained replacement information into an engineering-focused reference. It emphasizes the limits of package and temperature substitution so that a proposed replacement is reviewed as a true board-level decision rather than selected from a family name alone.

RFQ Kontak
XC3S200A-4FTG256C - 4032-Cell Spartan-3A FPGA | AMD
XC3S200A-4FTG256C

XC3S200A-4FTG256C - 4032-Cell Spartan-3A FPGA | AMD

AMD/Xilinx XC3S200A-4FTG256C is a Spartan-3A field-programmable gate array containing 4032 configurable logic cells, 195 user I/Os, and approximately 200000 system gates in a 256-pin FTBGA package. The device uses 90 nm CMOS technology, operates from a 1.2 V core supply, and is rated for a 667 MHz maximum operating frequency. These headline values place it in the low-voltage, high-density programmable-logic segment of the semiconductor hierarchy: FPGA → field-programmable gate array → programmable logic IC → integrated circuit. An FPGA is a reconfigurable digital integrated circuit whose logic, memory, and signal-processing resources can be programmed after manufacture. Unlike a fixed-function application-specific integrated circuit, the Spartan-3A architecture allows designers to implement parallel processing, control logic, interfaces, and hardware acceleration in one device. The XC3S200A-4FTG256C combines that flexibility with a relatively compact 17 mm × 17 mm ball-grid-array footprint. The 4032-cell configuration provides substantial logic capacity for embedded control, communications, instrumentation, and industrial interface designs. Its 195 user I/Os support connections to external memory, converters, transceivers, and digital peripherals. The stated 667 MHz maximum frequency provides a concrete timing target, although actual interface performance remains dependent on the selected clock, I/O standard, routing, logic depth, and timing constraints. The -4 speed designation identifies the device’s specified performance grade, while FTG256 denotes the 256-ball package used by this ordering variant. The C suffix identifies the commercial temperature grade, with an operating range of 0°C to +85°C. Like other FPGAs, the device is configured through a serial or parallel programming path and then operates as a configurable digital circuit rather than a conventional fixed analog or mixed-signal component. Typical uses include industrial control systems, data-acquisition front ends, communications adapters, embedded signal processors, and compact control platforms. The 195 I/O count is especially useful when a design must retain legacy parallel interfaces while also implementing programmable logic and sequencing. The Spartan-3A family was designed for cost-sensitive, high-volume applications where field programmability reduces the need for separate fixed-function devices. PCB design should follow the AMD Spartan-3A family data sheet DS529 for the FTBGA-256 land pattern, power rails, decoupling, configuration pins, and I/O standards. Preserve the required configuration interface, connect unused pins according to the device guidance, and verify every high-speed interface against the selected I/O standard. Because the commercial-grade device is intended for 0°C to +85°C operation, it should not be selected for a wider industrial or automotive temperature environment without a suitable grade. This product summary consolidates the device’s principal capacity, package, speed, and application characteristics into an engineering-oriented reference. It also distinguishes same-footprint Spartan-3A options by logic density and temperature grade, helping designers identify candidate replacements while still requiring bitstream, timing, pinout, and lifecycle verification before substitution.

RFQ Kontak
XC3S200A-4FTG256I - 200K Gate Spartan-3A FPGA, 195 I/O | AMD/Xilinx
XC3S200A-4FTG256I

XC3S200A-4FTG256I - 200K Gate Spartan-3A FPGA, 195 I/O | AMD/Xilinx

The AMD/Xilinx XC3S200A-4FTG256I is a Spartan-3A family Field Programmable Gate Array (FPGA) with 200,000 system gates, 4,032 logic cells, and 195 user I/Os in a 256-ball FineLine Thin-profile BGA (FTG256) package at industrial temperature grade (I suffix). Built on 90nm CMOS technology with a 1.2V core, the device targets cost-sensitive, high-volume digital logic applications. An FPGA (Field Programmable Gate Array) is a class of programmable logic device that allows engineers to implement arbitrary digital circuits using a matrix of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardware blocks such as block RAM and multipliers. Within the broader semiconductor taxonomy, FPGAs sit alongside ASICs and CPLDs as reconfigurable logic; the Spartan-3A family is Xilinx's low-cost, high-volume segment designed for consumer, industrial, and communications glue-logic applications. Key specifications of the XC3S200A-4FTG256I include 448 Configurable Logic Blocks (CLBs), 288 Kbits of block RAM, up to 667 MHz maximum operating frequency (speed grade -4), dedicated 18x18 hardware multipliers for DSP, and a Digital Clock Manager (DCM) block for clock synthesis. The FTG256 package measures 17x17 mm and uses a 1.0 mm ball pitch. Architecturally, the Spartan-3A integrates CLBs arranged in rows and columns, surrounded by IOBs (I/O blocks), with block RAM columns interleaved, four DCMs, and dedicated multiplier blocks. The device supports multiple I/O standards including LVTTL, LVCMOS, LVDS, and differential HSTL/SSTL for direct interface to external memories and high-speed peripherals. Typical applications include industrial control and machine vision, consumer electronics display controllers, communications protocol bridges, low-cost video processing, motor control, and educational/hobbyist development boards. The wide operating temperature range (-40C to +100C industrial grade) also suits factory automation and outdoor equipment. Designers should pay attention to the FTG256 ball-pinout for PCB layout: a 256-ball BGA with 1.0 mm pitch requires 4-6 layer PCB design with microvia or via-in-pad technology for reliable assembly. Use Xilinx ISE WebPACK or the modern AMD Vivado/Vivado Lab Edition for configuration bitstream generation. Power estimation should be performed with the Xilinx Power Estimator (XPE) tool before finalizing thermal management. This page consolidates current distributor pricing, verified pin-compatible drop-in alternatives in the Spartan-3A family, and practical design notes - practical context not found in the bare manufacturer datasheet.

RFQ Kontak
XC3S200A-4VQ100I - 200K Gate Spartan-3A FPGA | AMD
XC3S200A-4VQ100I

XC3S200A-4VQ100I - 200K Gate Spartan-3A FPGA | AMD

The AMD Xilinx XC3S200A-4VQ100I is a Spartan-3A field-programmable gate array with 4,032 logic cells, 294,912 system gates, 68 I/O, and a maximum advertised clock frequency of 667 MHz. The device is manufactured using 90 nm FPGA technology, operates from a 1.2 V core supply, and is packaged in a 100-pin TQFP for surface-mount PCB assembly. An FPGA is a programmable-logic semiconductor that combines configurable logic, memory, and digital input/output resources on one integrated circuit. The Spartan-3A family belongs to the FPGA hierarchy, where programmable logic provides a hardware implementation path for control, interface, signal-processing, and communication functions. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured during design, debug, or upgrade phases. The XC3S200A-4VQ100I combines a 200K-gate device class with 4,032 logic cells and 68 available I/O. Its -4 speed designation identifies a performance grade, while the industrial-temperature suffix supports use in industrial environments. The 100-pin TQFP package provides a compact, leaded surface-mount option for designs using conventional PCB assembly and inspection processes. The Spartan-3A architecture integrates programmable logic blocks, dedicated block RAM resources, digital signal-processing capability, and programmable I/O structures. These resources allow parallel data paths, state machines, protocol interfaces, and control functions to be implemented in hardware. The 667 MHz maximum frequency is a headline device figure and should be treated as a timing-class reference rather than a guaranteed operating frequency for every routed design. Typical uses include industrial control systems, embedded instrumentation, legacy video and communications interfaces, peripheral controllers, and general-purpose digital logic platforms. Its 68 I/O provide connectivity for buses, status signals, clocks, resets, and external converters. The 1.2 V core architecture also makes careful rail design and decoupling essential when integrating the FPGA with modern mixed-signal or processor-based systems. PCB design should follow the manufacturer pinout and package information, with particular attention to supply pins, configuration pins, clock inputs, and exposed requirements for the selected board revision. Verify speed, temperature, and fitment requirements before committing a design to production. This product page combines the core Spartan-3A device data with package-aware alternatives, comparison parameters, and practical replacement guidance intended to accelerate engineering review and sourcing decisions.

RFQ Kontak
XC3S200A-5FGG320C - 200K Spartan-3A FPGA | AMD
XC3S200A-5FGG320C

XC3S200A-5FGG320C - 200K Spartan-3A FPGA | AMD

The AMD XC3S200A-5FGG320C is a Spartan-3A field-programmable gate array with 200,000 system gates, 4,032 configurable logic cells, and 248 user I/O in a 320-pin FBGA package. It combines a 770 MHz maximum performance figure with 90 nm fabrication technology and a nominal 1.2 V core supply, making it suitable for cost-sensitive embedded, industrial, communications, and consumer logic systems. An FPGA is a programmable-logic semiconductor whose interconnect and processing elements are configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and offers an alternative to application-specific integrated circuits when interfaces, control logic, or product requirements are likely to evolve. The Spartan-3A family combines configurable logic, block RAM, dedicated multipliers, and general-purpose I/O in a single device. The Spartan-3A architecture provides 4,032 logic cells, 200,000 system gates, 248 I/O, and up to 4032 blocks of logic-cell resources identified in the ordering information. The -5 suffix denotes the device speed grade, while FGG320C identifies the lead-free 320-ball grid-array package and commercial temperature configuration. The 90 nm process supports a compact implementation while retaining ample I/O for external memory, control signals, and communications interfaces. Its 320-pin FBGA package exposes substantially more interface options than smaller Spartan devices, making the XC3S200A suitable for systems that need several parallel buses or multiple external interfaces. Designers should account for the package's fine pitch, thermal paths, and routing complexity when defining a PCB footprint and assembly process. Configuration storage, startup behavior, clocking, decoupling, and I/O standards remain central implementation considerations. Typical uses include industrial automation controllers, embedded protocol bridges, data-acquisition systems, machine-control interfaces, low-cost network equipment, and consumer electronic logic. The 248 I/O count is particularly useful for parallel sensor acquisition, display and memory interfaces, and mixed peripheral connectivity, while the programmable architecture allows functional updates without changing the PCB. For robust implementation, follow the AMD DS529 family datasheet for pin assignments, supported I/O standards, configuration requirements, and package details. Place all required decoupling capacitors close to the appropriate supply pins, validate high-speed interface signal integrity, and confirm configuration storage or programming interfaces before committing a board layout. This product page consolidates the verified device identity, package characteristics, drop-in speed- and temperature-grade alternatives, sourcing guidance, and practical design considerations needed to evaluate the XC3S200A-5FGG320C for an embedded programmable-logic design.

RFQ Kontak
XC3S200A-5FTG256C - 200K Spartan-3A FPGA | AMD Xilinx
XC3S200A-5FTG256C

XC3S200A-5FTG256C - 200K Spartan-3A FPGA | AMD Xilinx

The AMD Xilinx XC3S200A-5FTG256C is a Spartan-3A field-programmable gate array built on a 90 nm process for logic-dense embedded systems, telecommunications equipment, industrial control, and consumer electronics. It provides 4,032 logic cells, 448 configurable logic blocks, 200,000 equivalent gates, 294,912 RAM bits, and 195 user I/Os in a 17 x 17 mm 256-FTBGA package. An FPGA is a programmable semiconductor whose digital circuits are defined by a configuration bitstream rather than a fixed mask set. Within the broader hierarchy, this device is an FPGA, a reconfigurable digital logic IC, and ultimately a semiconductor. It allows parallel processing, state machines, interfaces, protocol bridging, and fixed-function acceleration to be consolidated into one device without developing a custom ASIC. The Spartan-3A architecture combines logic resources with block RAM, dedicated multipliers, and programmable I/O. The -5 speed designation indicates a higher speed grade than -4 devices, while the C suffix denotes the commercial operating-temperature grade. The family supports single-ended and differential I/O standards, including TMDS, PPDS, SSTL3 Class I and II, plus interface IP for PCI, PCI Express, USB, FireWire, CAN, SPI, and I2C designs. This part provides 195 user I/Os and operates from a 1.14 V to 1.2 V internal supply range in the available device documentation. Its 770 MHz maximum performance figure, 4032 logic cells, and 448 CLBs make it suitable for medium-complexity control logic, multi-interface adapters, embedded protocol bridges, and display-oriented signal processing where a larger FPGA would be unnecessary. Typical applications include industrial automation controllers, telecommunications line and data-plane equipment, consumer video and display interfaces, network interface adapters, embedded storage controllers, and general-purpose digital prototyping. Hot-swap-capable I/O resources and differential signaling support also suit designs where board-level interface reliability and signal integrity are important. When planning a PCB layout, follow the AMD pinout and package information for the FTG256 ball grid, including power, configuration, clock, and user-I/O ball assignments. Confirm the selected configuration memory interface, supply sequencing, decoupling requirements, and differential-pair routing rules before releasing the board layout. This page adds application-specific guidance, engineering design notes, comparison parameters, and practical drop-in alternatives to the basic device specifications. It helps engineers evaluate the XC3S200A-5FTG256C against related Spartan-3A devices before committing a legacy or long-lived design to the FTG256 footprint.

RFQ Kontak
XC3S200A-5VQG100C - 4032-LC 770 MHz Spartan-3A FPGA | Xilinx
XC3S200A-5VQG100C

XC3S200A-5VQG100C - 4032-LC 770 MHz Spartan-3A FPGA | Xilinx

The Xilinx XC3S200A-5VQG100C is a Spartan-3A field-programmable gate array with 4,032 logic cells, 200,000 equivalent logic gates, 294,912 RAM bits, 68 user I/O pins, and a maximum frequency of 770 MHz, housed in a 100-pin VTQFP package. The device operates from a 1.14 V to 1.26 V core-supply range and is specified for 0°C to 85°C ambient operation. An FPGA is a programmable digital integrated circuit in which logic, interconnections, and embedded block RAM are configured after manufacture. The XC3S200A belongs to the Spartan-3A FPGA family, a cost-sensitive logic platform within the broader FPGA and programmable-logic hierarchy. Unlike fixed-function logic ICs, an FPGA can support protocol bridging, control logic, signal processing, data acquisition, and display-interface functions in one configurable device. Key resources include 448 logic array blocks, 4,032 logic cells, 200,000 equivalent gates, 294,912 RAM bits, and 68 user I/O. Its -5 speed grade supports operation up to 770 MHz, making it suitable for designs requiring more timing margin than the -4 grade. The 1.2 V core architecture reduces power requirements relative to many earlier programmable-logic families, while the 100-pin surface-mount package supports compact industrial and embedded equipment. The device uses 90 nm CMOS technology and combines configurable logic blocks with dedicated block RAM and programmable I/O resources. Designers can implement parallel data acquisition, protocol conversion, timing, control, and low-to-moderate-complexity digital signal processing in a single FPGA. Configuration storage is separate from configuration logic, allowing a bitstream to be loaded at power-up or through an external configuration source. Typical uses include industrial automation, motor and sensor interfaces, communications protocol bridges, embedded display control, data-acquisition systems, and legacy video-processing equipment. The Spartan-3A family is particularly relevant to cost-sensitive, high-volume products where a programmable architecture is needed without moving to a larger or higher-cost FPGA platform. Before placing the device in a new design, verify every VQG100 pin assignment against the AMD Spartan-3A family data sheet, including dedicated configuration, clock, power, and I/O pins. Existing XC3S200A-5VQG100C designs should also confirm bitstream compatibility, termination, decoupling, and signal-integrity requirements before any alternate source or grade is substituted. This page combines device specifications, package information, lifecycle status, replacement analysis, application guidance, and practical design considerations to support legacy Spartan-3A maintenance and controlled redesign planning.

RFQ Kontak
XC3S200AN-4FT256C - 200K Gate Spartan-3AN FPGA | AMD
XC3S200AN-4FT256C

XC3S200AN-4FT256C - 200K Gate Spartan-3AN FPGA | AMD

The AMD Xilinx XC3S200AN-4FT256C is a 200K-system-gate Spartan-3AN field-programmable gate array with 4,032 logic cells, 195 user I/Os, and a maximum performance rating of 667 MHz, housed in a 256-pin FTBGA package. It combines programmable logic with non-volatile configuration memory and is intended for cost-sensitive embedded systems requiring compact integration and flexible post-build configuration. An FPGA is a semiconductor device whose digital logic, interconnect, and I/O resources are configured by a bitstream rather than being permanently defined in silicon. The Spartan-3AN family belongs to the broader FPGA hierarchy, combining configurable logic blocks, block RAM, dedicated multipliers, programmable I/O, and on-chip non-volatile memory. This makes it suitable for parallel processing, control, interface bridging, signal generation, and compact embedded logic implementations. The XC3S200AN-4FT256C provides 200K system gates and 4,032 logic cells in a compact FTBGA-256 package. Its 195 I/Os provide substantial connectivity for external memory, communications, control signals, and mixed peripherals. The -4 suffix denotes the device performance grade, while the C suffix identifies the commercial temperature class. Its stated operating range is 0°C to 85°C, making it appropriate for equipment expected to operate within commercial environmental conditions. The Spartan-3AN architecture uses 90 nm fabrication technology and a 1.2 V core supply according to the family comparison data. Its non-volatile configuration capability retains the programmed logic after power removal, avoiding a mandatory external configuration-memory source in designs that exploit that feature. The 256-ball package supports dense PCB integration but requires careful escape routing, thermal analysis, and assembly process control. Typical uses include industrial control and automation, embedded instrumentation, communications gateways, digital signal-processing front ends, and compact consumer electronics. The 195 available I/Os are particularly useful when several buses, sensors, converters, and status or control signals must be consolidated into one programmable device. Designers can also implement parallel algorithms in configurable logic instead of using several discrete components. The primary layout concern is BGA fanout and signal integrity. Place power and ground connections directly according to the package pinout, provide continuous return paths beneath high-speed routes, and follow the manufacturer’s decoupling and printed-circuit-board guidance. Validate the assembly process because the 256-pin FTBGA requires fine-pitch manufacturing, inspection, and adequate solder-joint inspection coverage. This product record combines the family specifications, package details, temperature grade, search demand, and verified cross-reference results with practical substitution and layout guidance. It supports faster engineering review while keeping every unavailable value explicitly identified rather than inferred.

RFQ Kontak
XC3S250E-4CP132I - 250K Gate Spartan-3E FPGA | AMD
XC3S250E-4CP132I

XC3S250E-4CP132I - 250K Gate Spartan-3E FPGA | AMD

The AMD XC3S250E-4CP132I is a Spartan-3E field-programmable gate array with 250,000 gates, 5,508 logic elements, 612 logic array blocks, 221,184 bits of on-chip RAM, and 92 user I/O, packaged in a 132-terminal TFBGA CSPBGA. It operates from a 1.14 V to 1.26 V core supply and supports an industrial junction-temperature range of -40°C to 100°C. A field-programmable gate array is a semiconductor whose logic, interconnect, and I/O behavior can be configured after fabrication. The Spartan-3E family belongs to the FPGA hierarchy, combining programmable logic blocks with block RAM, dedicated input and output resources, and configurable interconnect. This makes the XC3S250E-4CP132I useful when fixed-function logic is insufficient but a dedicated ASIC would be uneconomic. The device provides 5,508 logic elements organized into 612 logic array blocks, together with 221,184 bits of block RAM. Its 92 user I/O support connections to external memory, control interfaces, converters, transceivers, and digital peripherals. The -4 suffix identifies the performance grade, while the I suffix identifies the industrial-temperature option. The exact package is the 132-terminal TFBGA CSPBGA arrangement. The XC3S250E-4CP132I uses a selectable 1.14 V to 1.26 V core supply. Because the core supply range is narrow, a power design must account for regulator tolerance, startup sequencing, and decoupling close to the device. Block RAM provides deterministic on-chip storage for buffers, state machines, lookup tables, and interface pipelines without consuming external memory bandwidth. Typical applications include industrial control and automation, data acquisition, communications gateways, embedded test equipment, video or display processing, and instrumentation. The 92 I/O count is especially useful for parallel buses, high-speed serial interfaces using selectable I/O standards, memory controllers, and systems combining programmable logic with external processors. Design the power rails and ball assignments directly from the Spartan-3E family data sheet. Preserve the required decoupling structure, verify every BGA escape route, and account for BGA solder-mask and paste requirements during PCB fabrication. A complete ball-level assignment must be taken from the package pinout because the public listing does not expose the individual 132-terminal map. This page combines the verified Spartan-3E device specifications, package information, price-location guidance, family-member comparisons, and practical implementation considerations. It also identifies the temperature- and speed-grade alternatives that can use the same 132-terminal footprint while making their different qualification and timing requirements explicit.

RFQ Kontak
XC3S250E-4PQG208C - 250K Gate Spartan-3E FPGA | AMD
XC3S250E-4PQG208C

XC3S250E-4PQG208C - 250K Gate Spartan-3E FPGA | AMD

The AMD XC3S250E-4PQG208C is a Spartan-3E field-programmable gate array with 250,000 system gates, 5,508 logic cells, 612 configurable logic blocks, and a maximum clock frequency of 572 MHz, housed in a 208-pin PQFP package. The device uses 90 nm CMOS technology and operates from a 1.2 V core supply. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a complementary metal-oxide-semiconductor integrated circuit. Spartan-3E devices combine configurable logic blocks, programmable I/O, block RAM, dedicated multipliers, and clock-management resources in a single package, allowing hardware behavior to be revised without changing the printed circuit board. The XC3S250E provides 158 inputs, 126 outputs, 612 CLBs, and 5,508 logic cells. Its 250,000 equivalent system gates support control logic, data acquisition, communications, interface bridging, embedded signal processing, and general-purpose prototype platforms. The 1.2 V supply requirement reflects the low-voltage core architecture, while the PQFP package provides 0.5 mm lead pitch and a surface-mount form factor suitable for multilayer boards and conventional assembly processes. The -4 speed designation identifies the device performance grade, while the PQG208 package code identifies the 208-pin PQFP configuration. The final C suffix denotes the commercial temperature grade. According to the AMD Spartan-3E family data sheet DS312, the device also includes dedicated multipliers and block RAM, making it suitable for designs that require deterministic parallel logic rather than a soft processor alone. Typical applications include industrial automation controllers, data-acquisition systems, communication equipment, test and measurement instruments, and embedded control systems. Engineers can use its programmable logic for protocol termination, data filtering, clock-domain interfaces, and parallel-to-serial conversion while preserving deterministic timing. The package also permits inspection and rework more readily than many fine-pitch ball-grid-array FPGA packages. When laying out the board, use the DS312 pinout and package drawing to assign power, ground, configuration, clock, and I/O signals. Keep core and I/O supply planes properly decoupled, provide all required configuration pins with valid levels during startup, and route high-speed clocks and differential-capable pairs according to the family guidance. Confirm that the selected board-generation tool and bitstream support this device before layout release. This product page combines device specifications, package details, replacement guidance, comparison parameters, and practical PCB considerations. It also distinguishes true same-footprint Spartan-3E options from alternatives requiring a package conversion or redesign, helping engineers preserve existing 208-pin PQFP hardware where possible.

RFQ Kontak
XC3S250E-4TQ144C - 250K Spartan-3E FPGA | AMD | LQFP-144
XC3S250E-4TQ144C

XC3S250E-4TQ144C - 250K Spartan-3E FPGA | AMD | LQFP-144

AMD XC3S250E-4TQ144C is a Spartan-3E field-programmable gate array with 250,000 logic gates, 5,508 configurable logic cells, 612 CLBs, and 108 user I/Os, packaged in a 144-pin LQFP. The -4 speed grade is listed at 572 MHz, while the device uses 90 nm CMOS technology and a 1.2 V core supply. A field-programmable gate array is a semiconductor in which the digital logic, interconnect, and selected input/output functions are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, above individual logic gates and below application-specific programmable devices. Spartan-3E devices combine configurable logic blocks, embedded block RAM, dedicated multipliers, and programmable I/O in a single package. The XC3S250E-4TQ144C provides 221,184 bits of RAM and 108 I/Os in a 22 x 22 mm TQFP-144 package with a 0.5 mm lead pitch. Its 250K logic density and 144-pin footprint make it useful for embedded control, communications, instrumentation, and general digital signal-processing designs. The -4 suffix identifies the device speed grade, while the final C character identifies the commercial temperature option used in the ordering code. Spartan-3E devices combine programmable logic with dedicated arithmetic and memory resources. The 612 CLBs supply the configurable fabric, while the 5,508-cell count and 250,000-gate rating describe the device's nominal logic capacity. The 108 available I/Os support external interfaces, subject to the voltage, timing, and pin constraints defined for the selected configuration. The 1.2 V core technology supports higher system performance than older FPGA generations while retaining a familiar 144-pin surface-mount footprint. Typical applications include industrial control modules, sensor and instrumentation interfaces, serial data acquisition, embedded communications, and compact control logic. The available I/O count can support multiple parallel buses, serial transceivers, status indicators, and external memory interfaces when the design's pin constraints are respected. The 572 MHz listed device performance also makes the part suitable for pipeline-oriented logic and fixed-function signal processing implemented in programmable logic. Designers should treat the XC3S250E-4TQ144C as a legacy Spartan-3E device and verify toolchain availability, bitstream support, and the required I/O standard against the complete AMD/Xilinx documentation before committing a new production design. PCB layouts should follow the manufacturer's 144-pin package drawing, including power and ground distribution, decoupling, and signal-routing guidance. This page combines the XC3S250E-4TQ144C ordering information, architecture specifications, drop-in alternatives, application guidance, and package-aware comparison information to support engineering selection and sourcing decisions.

RFQ Kontak
XC3S250E-4VQ100C - 250K Gate Spartan-3E FPGA | AMD
XC3S250E-4VQ100C

XC3S250E-4VQ100C - 250K Gate Spartan-3E FPGA | AMD

The AMD XC3S250E-4VQ100C is a Spartan-3E field-programmable gate array with 250,000 system gates, 5,508 logic cells, 66 user I/O pins, and a 572 MHz maximum clock frequency in a 100-pin TQFP package. Designed for cost-sensitive programmable-logic applications, it combines 221,184 RAM bits with 612 logic array blocks and is manufactured using 90 nm CMOS technology at a 1.2 V core voltage. A field-programmable gate array is a semiconductor whose digital logic can be configured after fabrication. An FPGA belongs to the programmable-logic device hierarchy, where configuration memory, programmable logic blocks, block RAM, and programmable I/O implement parallel hardware functions. The Spartan-3E family targets consumer, communications, industrial, and embedded systems where a small FPGA provides more flexibility than fixed logic without the cost of the largest devices. The XC3S250E-4VQ100C provides 250,000 system gates, 5,508 configurable logic elements, 612 logic array blocks, and 221,184 total RAM bits. Its 66 user I/O pins support external interfaces, while the -4 speed grade is associated with a maximum clock frequency of 572 MHz. The 100-pin TQFP package uses a 0.5 mm pitch, allowing conventional surface-mount assembly while keeping the device physically smaller than many larger FPGA packages. The device is based on 90 nm CMOS technology and operates from a 1.2 V core supply. Its architecture supports parallel datapaths, control logic, communication interfaces, and general-purpose embedded processing implemented as programmable logic. Configuration data establishes the interconnection and logic functions, allowing one board design to support multiple firmware or configuration revisions without changing the PCB. Typical uses include industrial control, networking equipment, video and display interfaces, consumer electronics, test systems, and embedded protocol bridges. Its 66 I/O pins are useful for designs requiring a moderate number of external connections, while the 221,184-bit RAM resource can support buffering, packet storage, and state-machine data. The 572 MHz maximum clock supports demanding datapaths when device utilization and routing permit the target frequency. PCB design should reserve the Spartan-3E configuration interface, provide a stable 1.2 V supply, and follow the manufacturer's decoupling and pinout guidance. Designers migrating from another FPGA should treat the device as an obsolete architecture and verify timing, I/O standards, configuration behavior, and tool-chain compatibility before committing new production hardware. This product overview consolidates the core Spartan-3E architecture, pin and package information, application guidance, and confirmed same-package alternatives. It also highlights the migration considerations engineers should evaluate before selecting this legacy FPGA for an existing or new design.

RFQ Kontak
XC3S400-4FG320C - 400K-Gate Spartan-3 FPGA | AMD Xilinx
XC3S400-4FG320C

XC3S400-4FG320C - 400K-Gate Spartan-3 FPGA | AMD Xilinx

AMD Xilinx XC3S400-4FG320C is a Spartan-3 field-programmable gate array with 400,000 system gates, 221 I/O, and a 1.2 V operating voltage, packaged in a 320-ball fine-pitch BGA. The -4 suffix identifies its device speed grade, while the commercial C suffix denotes the grade category indicated in the manufacturer part number. It is designed for cost-sensitive embedded systems requiring configurable logic, parallel processing, and flexible interface support. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after manufacture. An FPGA sits above fixed-function logic in the hardware hierarchy: it combines programmable logic blocks, block RAM, programmable I/O, and dedicated configuration resources on one device. Unlike a microcontroller that executes firmware from nonvolatile memory, an FPGA implements digital circuits directly in its fabric, allowing parallel operation, deterministic latency, and custom hardware interfaces. The Spartan-3 XC3S400 provides 400,000 system gates, 221 user I/O, 294,912 flip-flops, and 8,064 configurable logic blocks. Its 1.2 V core voltage supports low-voltage, power-conscious digital designs. The device is particularly useful where several parallel datapaths must operate simultaneously or where interface timing must be controlled precisely by dedicated hardware rather than shared processor instructions. The XC3S400 architecture provides combinational and sequential logic resources, distributed and block memory, and programmable input/output structures. Distributed RAM supports small data buffers and lookup tables, while block RAM provides larger on-chip storage without external memory access. Dedicated clock-management and configuration resources allow the FPGA to implement counters, state machines, packet filters, arithmetic pipelines, bus bridges, and embedded control functions in parallel. Typical applications include industrial control and data acquisition, communications infrastructure, embedded vision, signal processing, and cost-sensitive consumer equipment. Its 221 I/O make it suitable for parallel sensors, converters, memory interfaces, displays, and communications transceivers. Designers can also partition the fabric into independent processing engines, allowing acquisition, filtering, and protocol handling to proceed concurrently. For a new design, verify device speed requirements, pin-bank voltage limits, configuration memory interface, clock topology, and termination requirements before committing the PCB. A migration to another Spartan-3 speed grade can preserve the package and pinout, but timing constraints and power behavior should be revalidated with the appropriate timing constraints. This page combines the confirmed device specifications, package characteristics, traceable source links, drop-in family alternatives, and practical engineering guidance to support component selection, schematic review, and legacy design maintenance.

RFQ Kontak
XC3S400-4FG320I - 400K Gate Spartan-3 FPGA | Xilinx
XC3S400-4FG320I

XC3S400-4FG320I - 400K Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S400-4FG320I is a Spartan-3 field-programmable gate array with 400,000 system gates, 8,064 logic cells, 294,912 RAM bits, and 221 user I/Os, packaged in a 19 mm × 19 mm 320-pin fine-pitch ball grid array. It operates from a 1.2 V core supply and is identified by the -4 performance grade and I industrial temperature designation. A field-programmable gate array, or FPGA, is a reconfigurable semiconductor in which digital logic and interconnects are programmed after manufacture. An FPGA belongs to the programmable-logic hierarchy, which combines parallel gate-level logic, block RAM, programmable I/O, and embedded processing resources. This combination allows one physical device to implement control logic, protocol interfaces, data acquisition, signal processing, or complete embedded systems without changing the printed circuit board. The XC3S400 provides 221 user I/Os for external buses, counters, serial links, memory interfaces, and mixed-signal control functions. Its 294,912 bits of block RAM support buffering, packet storage, lookup tables, and data-pipeline stages, while the -4 speed grade identifies its position within the Spartan-3 performance range. The industrial I suffix distinguishes it from commercial-temperature C variants. The 320-ball FBGA offers dense board connectivity but requires careful escape-routing, thermal analysis, and assembly control. Spartan-3 devices combine dedicated arithmetic and logic resources with programmable interconnect and a large selection of I/O standards. The 8,064 logic cells allow concurrent datapath and control operations, while block RAM avoids extensive use of logic for storage-heavy functions. Because the I/O count is fixed at 221 for the XC3S400, system planning must reserve enough pins for clocks, configuration access, power, ground, and high-speed interfaces. Typical uses include industrial automation, programmable logic controllers, sensor acquisition, motor-control interfaces, embedded communications, test equipment, and cost-sensitive control systems. The FPGA is especially useful where parallel logic, deterministic timing, configurable I/O, and field-updateable firmware must coexist in a compact package. Its 1.2 V core supply also allows modern low-voltage designs to consolidate multiple logic functions. PCB implementation should use the manufacturer's pinout and recommended layout guidance rather than a generic BGA fanout. Decoupling must be placed directly at the supply and ground balls, unused configuration pins must be handled exactly as specified, and every power ball must connect to the appropriate plane or via array. The high pin count also makes inspection, solderability, and thermal cycling important production considerations. This page combines the device's principal architecture and package data with same-family migration options, application guidance, and design checks. It focuses on the decisions that materially affect a Spartan-3 design: logic capacity, RAM, I/O availability, speed grade, temperature grade, package migration, configuration stability, and PCB implementation.

RFQ Kontak
XC3S400-4FG456C - 400K Spartan-3 FPGA | AMD Xilinx
XC3S400-4FG456C

XC3S400-4FG456C - 400K Spartan-3 FPGA | AMD Xilinx

AMD Xilinx XC3S400-4FG456C is a Spartan-3 field-programmable gate array with 400,000 system gates, 294,912 logic cells, 8,064 dedicated block RAM bits, 264 I/O sites, and a 456-BBGA package. It operates from a 1.2 V core supply and targets logic-intensive embedded systems requiring programmable combinational and sequential logic, dedicated memory, and a large general-purpose I/O complement. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. The XC3S400 belongs to the Spartan-3 FPGA hierarchy, which combines configurable logic, block RAM, programmable I/O, and dedicated arithmetic resources on one device. This position between fixed-function ASICs and microcontrollers makes it suitable when a design needs hardware-level parallelism, flexible interfaces, or product-specific logic that would be expensive to implement in silicon. The -4 designator identifies a Spartan-3 performance grade, while FG456 identifies the 456-ball fine-pitch BGA package and C identifies the commercial temperature designation. The 456-BBGA footprint supports a high pin count and dense board routing, making the device appropriate for industrial control, communications, instrumentation, embedded processing, and legacy platform designs that already use the Spartan-3 package. Its large I/O count can reduce the need for external interface logic when connecting the FPGA to buses, converters, memories, and control signals. The device includes 294,912 logic cells and 8,064 bits of dedicated block RAM. These resources allow parallel datapaths, state machines, protocol handling, data acquisition, and control functions to be implemented concurrently rather than executed sequentially by a general-purpose processor. Programming is performed through the Xilinx configuration flow, while the final configuration determines which interconnect and logic resources are active. Designers should preserve the exact 456-BBGA land pattern, power architecture, decoupling strategy, configuration interface, and I/O constraints when replacing another programmable device. Because this package contains many fine-pitch balls, assembly and inspection require qualified PCB manufacturing processes and appropriate BGA assembly capability. Any modernization should begin with a pin, configuration, I/O-standard, and timing comparison rather than assuming that a newer FPGA is automatically interchangeable. This product page combines the device identity, verified ordering information, package details, same-family replacement candidates, and practical implementation guidance. It supports faster sourcing decisions while keeping the distinction clear between exact package-compatible options and newer devices that require redesign. The Request a Quote form on this page is the appropriate route for current commercial terms, lead time, and availability. Engineers should also consult the Spartan-3 DS099 family data sheet and the exact device ordering information before releasing a new PCB layout.

RFQ Kontak
XC3S400-4FG456I - 400K Gate Industrial Spartan-3 FPGA | AMD
XC3S400-4FG456I

XC3S400-4FG456I - 400K Gate Industrial Spartan-3 FPGA | AMD

AMD XC3S400-4FG456I is an industrial-grade Spartan-3 field-programmable gate array with 400,000 system gates, 8,064 logic cells, and 264 user I/Os, packaged in a 456-ball FBGA. It uses 90 nm fabrication technology, supports a 1.14 V to 1.26 V core supply, and is specified for an industrial junction-temperature range of -40°C to +100°C. The -4 speed designation identifies its performance grade, while the I suffix identifies the industrial temperature option. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic, flip-flops, memory blocks, and programmable I/O in one device. An FPGA belongs to the broader semiconductor and programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during development to implement control logic, interfaces, signal processing, and system functions without changing the printed circuit board. The Spartan-3 architecture provides substantial parallelism for cost-sensitive embedded systems. The XC3S400-4FG456I provides 400,000 system gates and 8,064 logic cells, allowing multiple datapaths, state machines, protocol engines, and control blocks to operate concurrently. Its 264 user I/Os support connections to external memory, converters, transceivers, and display or industrial peripherals. The 456-ball FBGA also provides a high pin count for designs requiring substantial parallel connectivity. Operating from a 1.14 V to 1.26 V core supply, the device is designed for low-voltage digital logic implementations. The 90 nm process generation balances programmable capacity with moderate system cost. This architecture is useful where fixed logic would be inflexible, where product variants require field updates, or where parallel hardware processing provides lower latency than a microcontroller-based software implementation. Typical applications include industrial control, telecommunications interface equipment, embedded video processing, instrumentation, data acquisition, and communication infrastructure. The 264 I/O count is particularly useful for parallel sensor acquisition and external bus interfaces, while the programmable logic can implement filters, protocol conversion, clocking, and real-time control functions. Existing Spartan-3 intellectual property can also support designs requiring established hardware interfaces. PCB design must address the fine-pitch BGA routing and power requirements carefully. Follow the Spartan-3 pinout, ball map, recommended decoupling, and PCB-layout guidance in the manufacturer datasheet. Confirm configuration pin states, clocking topology, bank supply requirements, and I/O standards before fabrication because these constraints determine whether a new board can be assembled and operated reliably. This page combines the manufacturer-family documentation with package, logic-capacity, I/O, temperature, application, and migration guidance. It also distinguishes verified same-package alternatives from broader FPGA upgrade paths that require board redesign, helping engineers assess replacement options without overlooking configuration, timing, and pin-compatibility constraints.

RFQ Kontak
XC3S400-4FGG320I - 400K Gate Spartan-3 FPGA | AMD | Industrial
XC3S400-4FGG320I

XC3S400-4FGG320I - 400K Gate Spartan-3 FPGA | AMD | Industrial

AMD XC3S400-4FGG320I is a Spartan-3 field-programmable gate array with 400,000 system gates, 294,912 logic cells, 221 user I/Os, and a 1.2 V core supply in a 320-pin fine-pitch ball grid array. The industrial-temperature designation supports equipment intended for operation from 0°C to 85°C. An FPGA is a programmable semiconductor in which digital logic, interfaces, and signal-processing functions are configured after manufacture. The Spartan-3 family occupies the FPGA hierarchy between fixed-function logic devices and larger programmable-logic arrays. Its configurable lookup tables, programmable interconnect, block RAM, dedicated multipliers, and user I/Os allow one board design to support multiple protocols, control sequences, or accelerator architectures. Key features include 400,000 system gates, 294,912 logic cells, 221 user I/Os, and a 1.2 V supply. The 320-BGA package provides dense board connectivity in a relatively small land pattern. The -4 speed designation identifies the device performance grade, while the industrial I suffix denotes the associated temperature range. The Spartan-3 architecture combines programmable logic with dedicated arithmetic resources. Its LUT-based logic fabric is suitable for control logic, interface bridging, packet processing, and parallel data pipelines. Dedicated block memory supports buffering, lookup tables, and data storage, while dedicated multiplier blocks accelerate multiply and accumulate operations. Configuration data determines the implemented circuit, allowing field updates without changing the PCB. Typical applications include industrial automation, embedded control, communications infrastructure, instrumentation, medical equipment, and compact digital signal-processing systems. The 221 available I/Os are useful for parallel sensor acquisition, external memory interfaces, serial transceivers, status indicators, and control signals. A clocking strategy and pin-constrained configuration file are essential for deterministic multi-clock designs. Power and signal integrity require careful PCB planning because a 320-BGA device has dense escape routing requirements. Decoupling capacitors should be placed directly beneath or near the supply and ground balls, and each power ball should be connected through short, low-inductance paths. Signal-integrity simulation should include package and board effects before high-speed interfaces are finalized. This page combines verified device characteristics, lifecycle information, same-package replacement options, comparison parameters, and practical implementation guidance. It also distinguishes a genuinely useful package-compatible replacement from larger Spartan-3 devices that require a different footprint and therefore cannot be soldered onto the original PCB land pattern.

RFQ Kontak