XC3S250E-4VQ100C - 250K Gate Spartan-3E FPGA | AMD
MPN: XC3S250E-4VQ100C ✗ Tapus ng BuhayXC3S250E-4VQ100C Ulas
A field-programmable gate array is a semiconductor whose digital logic can be configured after fabrication. An FPGA belongs to the programmable-logic device hierarchy, where configuration memory, programmable logic blocks, block RAM, and programmable I/O implement parallel hardware functions. The Spartan-3E family targets consumer, communications, industrial, and embedded systems where a small FPGA provides more flexibility than fixed logic without the cost of the largest devices.
The XC3S250E-4VQ100C provides 250,000 system gates, 5,508 configurable logic elements, 612 logic array blocks, and 221,184 total RAM bits. Its 66 user I/O pins support external interfaces, while the -4 speed grade is associated with a maximum clock frequency of 572 MHz. The 100-pin TQFP package uses a 0.5 mm pitch, allowing conventional surface-mount assembly while keeping the device physically smaller than many larger FPGA packages.
The device is based on 90 nm CMOS technology and operates from a 1.2 V core supply. Its architecture supports parallel datapaths, control logic, communication interfaces, and general-purpose embedded processing implemented as programmable logic. Configuration data establishes the interconnection and logic functions, allowing one board design to support multiple firmware or configuration revisions without changing the PCB.
Typical uses include industrial control, networking equipment, video and display interfaces, consumer electronics, test systems, and embedded protocol bridges. Its 66 I/O pins are useful for designs requiring a moderate number of external connections, while the 221,184-bit RAM resource can support buffering, packet storage, and state-machine data. The 572 MHz maximum clock supports demanding datapaths when device utilization and routing permit the target frequency.
PCB design should reserve the Spartan-3E configuration interface, provide a stable 1.2 V supply, and follow the manufacturer's decoupling and pinout guidance. Designers migrating from another FPGA should treat the device as an obsolete architecture and verify timing, I/O standards, configuration behavior, and tool-chain compatibility before committing new production hardware.
This product overview consolidates the core Spartan-3E architecture, pin and package information, application guidance, and confirmed same-package alternatives. It also highlights the migration considerations engineers should evaluate before selecting this legacy FPGA for an existing or new design.
Mga alternatibo na pwedeng ilagay na XC3S250E-4VQ100C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
XC3S250E-4VQG100C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC3S250E-4VQ100I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S250E-5VQ100C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S250E-5VQ100I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S250E-4VQ100C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC3S250E-4VQ100C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Spartan-3E field-programmable gate array |
| System Gates | 250,000 gates |
| Logic Cells | 5,508 logic cells |
| Logic Array Blocks | 612 LABs/CLBs |
| Total RAM | 221,184 RAM bits |
| User I/O Pins | 66 I/O pins |
| Maksimum na Taktiko ng Oras | 572 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm CMOS |
| Packhaging | 100-pin TQFP |
| Package Pitch | 0.5 mm |
| Terminal Count | 100 terminals |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng XC3S250E-4VQ100C 0.5 mm
Pin configuration para sa XC3S250E-4VQ100C (0.5 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC3S250E-4VQ100C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC3S250E-4VQ100C ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, Networking and Protocol Conversion, Video and Display Interfaces, Consumer Programmable Logic, Test and Measurement Equipment, Embedded Communication Gateways.
Industrial Control and Automation
The XC3S250E-4VQ100C fits industrial controllers that combine sequencing, machine timing, and communication logic on one FPGA. Its 5,508 logic cells and 612 LABs/CLBs provide parallel hardware for interlocks, counters, motion sequencing, and diagnostics, while 221,184 RAM bits can buffer process data. The 66 user I/O pins connect sensors, actuators, and field buses, and the 572 MHz maximum clock supports time-critical logic. Because the device is a mature architecture, new machinery designs should verify tool support and consider a current FPGA when redesign freedom is practical.
Inirekomenda
Networking and Protocol Conversion
The XC3S250E-4VQ100C can implement protocol bridges and interface adapters where parallel logic offers deterministic timing and flexible packet handling. The 250,000-system-gate device includes 5,508 logic cells, 612 LABs/CLBs, and 221,184 RAM bits for framing logic, transmit and receive buffers, and state management. Its 66 user I/O pins support multiple data paths, and the 572 MHz maximum clock can accommodate demanding packet-processing blocks. Board-level validation remains essential because I/O standards, timing, and configuration requirements must match the selected external interface components.
Inirekomenda
Video and Display Interfaces
The XC3S250E-4VQ100C is suitable for modest display timing, video timing generation, and interface-format conversion designs. Programmable logic can implement horizontal and vertical counters, synchronization generation, pixel routing, and data alignment, while the 221,184 RAM bits provide line buffers or frame-related storage. Its 66 I/O pins allow connection to memory and display-interface components, and the 572 MHz maximum clock supports parallel datapaths. Actual video bandwidth and pixel timing remain design-dependent and must be checked against routing, memory bandwidth, and the selected panel interface.
Inirekomenda
Consumer Programmable Logic
The Spartan-3E architecture of the XC3S250E-4VQ100C targets cost-sensitive consumer products that need flexible post-production logic. Its 250,000 system gates and 5,508 logic cells can implement feature control, user interfaces, simple media handling, and accessory logic without a separate microcontroller. The 100-pin TQFP package supports compact surface-mount construction, while 66 user I/O pins connect buttons, displays, and peripheral devices. Designers should account for the architecture's legacy status, configuration support, and product-lifecycle requirements when planning new consumer releases.
Inirekomenda
Test and Measurement Equipment
The XC3S250E-4VQ100C can implement flexible timing, stimulus generation, acquisition control, and pattern processing in test equipment. Its 612 LABs/CLBs and 5,508 logic cells support parallel state machines and digital datapaths, while 221,184 RAM bits can store samples, vectors, or calibration data. The 66 I/O pins provide connections to converters, memories, and fixture controls, and the 572 MHz maximum clock enables high-rate digital sequencing. Signal integrity, I/O standards, and timing closure must be evaluated for each instrument architecture before layout release.
Inirekomenda
Embedded Communication Gateways
The XC3S250E-4VQ100C fits gateway products that need parallel protocol handling, local buffering, and configurable logic around one or more communication controllers. Its 5,508 logic cells can implement framing, byte stuffing, filtering, and supervisory state machines, while 221,184 RAM bits support packet buffering and queues. The 66 user I/O pins are suitable for serial, parallel, and control interfaces, and the 572 MHz maximum clock supports concurrent datapaths. For new gateway products, compare migration effort and lifecycle risk against current low-power FPGA families before finalizing the architecture.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC3S250E-4VQ100C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC3S250E-4VQG100C | XC3S250E-4VQ100I | XC3S250E-5VQ100C | XC3S250E-5VQ100I | XC3S250E-4VQ100C |
|---|---|---|---|---|---|---|
| Package | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| System Gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates |
| Logic Cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells |
| Logic Array Blocks | 612 LABs/CLBs | 612 LABs/CLBs | 612 LABs/CLBs | 612 LABs/CLBs | 612 LABs/CLBs | 612 LABs/CLBs |
| Total RAM | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits |
| User I/O Pins | 66 I/O pins | 66 I/O pins | 66 I/O pins | 66 I/O pins | 66 I/O pins | 66 I/O pins |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Pangunahing mga Pagkakaiba
- Commercial-temperature -4 speed option in a compact 100-pin TQFP (kumpara saXC3S250E-4VQ100I)
- Same-footprint choice with a higher speed ordering class (kumpara saXC3S250E-5VQ100C)
- Direct same-package alternative confirmed in channel cross-reference records (kumpara saXC3S250E-4VQG100C)
Talaan ng Disenyo
Design the 1.2 V core rail and the device's auxiliary supply requirements from the AMD/Xilinx DS312 power-supply recommendations. Place the required bulk and decoupling capacitors at the pins identified in the package and reference-design guidance; do not substitute generic bulk-capacitor distances for the manufacturer's layout. Check startup current, configuration behavior, and rail sequencing under worst-case I/O activity before finalizing the power tree.
Route the configuration interface and clock inputs according to the DS312 pinout and layout guidance, keeping sensitive configuration paths away from noisy switching nodes. The 100-pin TQFP uses a 0.5 mm pitch, so inspect the assembled land pattern, solder-paste volume, and via strategy on a representative board. Preserve access for boundary-scan or programming connections if the product's test plan depends on them.
Do not treat another FPGA in a 100-pin package as interchangeable merely because the outline and pitch match. The XC3S250E-4VQ100C depends on Spartan-3E configuration, supply sequencing, I/O behavior, and device-specific timing. When changing speed or temperature ordering variants, rebuild the timing constraints and verify power, configuration, and I/O standards. A migration to another family should be treated as a redesign with a new pinout and tool flow.
Use the manufacturer's recommended clock topology and controlled-impedance routing for high-speed interfaces. The 572 MHz figure is a device capability rather than a guaranteed system operating frequency; achievable timing depends on logic utilization, routing, I/O standards, and external components. Run post-route timing analysis and reserve margin for speed grade, temperature, and process variation before treating the target frequency as achieved.
Impormasyon ng Pagsunod sa Kautusan
No exact-part environmental or automotive qualification statement is included in the cited component records. Request lot- and date-code-specific quality documentation before using the device in regulated production.
