Mga Produkto (44,000+)

EP610PC-30 - 16-Macrocell Classic EPLD, 30ns, PDIP-24 | Altera
EP610PC-30

EP610PC-30 - 16-Macrocell Classic EPLD, 30ns, PDIP-24 | Altera

The Altera EP610PC-30 is a 16-macrocell Classic EPLD (Erasable Programmable Logic Device) from the EP610 family, offered in a 24-pin PDIP through-hole package with a 30 ns propagation delay. It is a high-performance CMOS PLD originally designed by Altera (now Intel Programmable Solutions Group) and currently stocked and distributed by Rochester Electronics, LLC as an authorized continuing-source supplier. Classic EPLDs are a category of programmable logic devices (semiconductors) that combine AND/OR array logic with user-programmable macrocells. The Classic EPLD sits hierarchically within: programmable logic -> PLD -> EPLD -> Classic EPLD -> CMOS erasable PLD. Compared to earlier PAL/GAL devices, Classic EPLDs add output macrocells with configurable registers, feedback paths, and product-term allocation, enabling integration of multiple PAL-equivalent functions into a single chip. Key specifications of the EP610PC-30 include 300 usable gates, 16 macrocells, a 30 ns pin-to-pin propagation delay (tPD), a 33.3 MHz maximum pipeline frequency, and 5 V CMOS operation. The device supports asynchronous or synchronous clocking with dedicated input pins, provides 24 mA drive on outputs (typical), and is housed in a 24-pin 0.300-inch PDIP (Plastic Dual In-line Package) with through-hole mounting suitable for breadboarding, legacy retrofits, and industrial control equipment. The EP610PC-30 is fabricated in a 1-micron CMOS EPROM process with a quartz window option (not present on the plastic package). The architecture centers on a programmable AND array feeding an OR array into 16 output macrocells, each with a programmable register, output enable, and feedback path. Programming is performed with a standard EPROM programmer using the Altera A+PLUS or MAX+PLUS II toolchain (legacy software). The device is one-time programmable when supplied in the plastic PDIP package without a window. Typical applications include glue logic replacement for discrete 74-series TTL/CMOS gates, address decoding for 8-bit and 16-bit microprocessor systems, state-machine implementation for industrial controllers, bus-interface arbitration in legacy PC/104 and VME systems, and I/O decoding in M68000, x86, or 8051-based designs. Designers continue to use the EP610 family for long-lifecycle industrial, military, and aerospace programs where re-spinning a PCB around a modern CPLD is not feasible. When designing with this part, ensure the 30 ns tPD is compatible with the target system clock - it suits 8-25 MHz bus architectures. The device requires a single 5 V supply; a 0.1 uF decoupling capacitor placed close to VCC pin 24 is recommended. Because the EP610PC-30 is a mature product, long-lead-time planning and authorized stocking distributors should be considered for production runs. This page synthesizes Rochester Electronics distributor pricing, package-level technical data, same-family Altera EPLD drop-in alternatives, and design guidance that goes beyond what the original manufacturer datasheet alone offers.

RFQ Kontak
EP610PC-30 - 16-Macrocell Classic EPLD, 30ns, PDIP-24 | Altera
EP610PC30

EP610PC-30 - 16-Macrocell Classic EPLD, 30ns, PDIP-24 | Altera

The Altera EP610PC-30 is a high-performance 16-macrocell Classic EPLD (Erasable Programmable Logic Device) from the EP610 family, offering up to 100 MHz pipelined data rates in a 24-pin PDIP through-hole package. It is a CMOS, 5 V programmable logic device with 300 usable gates, 16 macrocells, and a 30 ns propagation delay (the "-30" speed grade), historically manufactured by Altera (now part of Intel) and currently sustained by Rochester Electronics as a long-term stock product. A PLD (Programmable Logic Device) is a digital integrated circuit whose internal logic structure and interconnect are user-configurable after manufacture, allowing engineers to implement custom glue logic, state machines, address decoding, and bus arbitration without committing to a custom ASIC. Within the broader taxonomy, the EP610 sits at: PLD -> EPLD (erasable, UV-window package optional) -> Classic EPLD family -> small-scale (16-macrocell) glue-logic segment. Compared to early bipolar PALs, the EP610 family added CMOS low power consumption, macrocell-based architecture (sum-of-products plus an output register), and erasable programming. Key features of the EP610PC-30 include 16 macrocells with configurable output polarity and feedback, 300 usable gates of logic capacity, pin-to-pin propagation delay of 30 ns (commercial speed grade), a maximum toggle frequency of 33.3 MHz, and an internal EPROM/EEPROM-based configuration memory (the Classic family uses UV-erasable or one-time-programmable cells). The device also exposes a dedicated JTAG/serial programming interface and supports in-system or device-programmer configuration via Altera's MAX+plus II legacy toolchain. Architecturally, the EP610 implements a programmable AND/OR array feeding 16 output macrocells, each containing a sum-of-products term generator plus a configurable D/T flip-flop. This architecture delivers deterministic, fixed-pin propagation delays (no routing-dependent timing), which simplifies timing closure in legacy 5 V designs versus early FPGAs. The classic EPLD is non-volatile - configuration is retained after power-down without external configuration memory. Typical applications include 5 V bus-interface glue logic (ISA, VME, and STD-bus address decoding), state machines for industrial control boards, peripheral chip-select generation in legacy computing platforms, parallel-port decoding, and replacement of multiple discrete 74-series TTL gates in compact through-hole designs. The PDIP-24 package is well-suited to breadboard prototyping, educational lab kits, and through-hole industrial controllers where socketed, user-replaceable logic is preferred. When designing with this part, note that the -30 speed grade trades off roughly 50 percent of toggle frequency versus the -15 grade, so verify that 33.3 MHz toggle / 30 ns pin-to-pin delay is sufficient for the target clock domain. For modern 3.3 V or lower-voltage systems, a level translator or a current-generation MAX II / MAX V CPLD is recommended. This page synthesizes distributor pricing, same-family and cross-family drop-in alternatives, and practical design notes not found in the original 1990s Altera datasheet, helping engineers source this legacy part reliably.

RFQ Kontak
EP610PC-35 - 16-Macrocell Classic EPLD, 35ns tPD | Rochester
EP610PC-35

EP610PC-35 - 16-Macrocell Classic EPLD, 35ns tPD | Rochester

The Rochester Electronics EP610PC-35 is a legacy-sustained 16-macrocell Classic EPLD (Erasable Programmable Logic Device) housed in a 24-pin PDIP through-hole package. It offers 300 usable gates, a 37ns pin-to-pin propagation delay (tPD) under the -35 speed grade, and pipelined data rates of up to 100 MHz on internal registered paths. The device is built on a 5V CMOS UV-erasable process and belongs to the original Altera Classic EPLD family that has been second-sourced by Rochester Electronics to support long-life-cycle and legacy systems. A Classic EPLD is a programmable logic device from the first generation of CMOS PLDs, combining macrocell-based logic, deterministic timing, and non-volatile (UV-erasable) configuration. EP610-class parts sit in the broader taxonomy of programmable logic devices (PLDs), which include simple PAL/GAL devices at the low end, CPLDs in the middle, and FPGAs at the high end. EP610PC-35 belongs to the low-density CPLD/EPLD tier, suitable for glue logic, address decoding, bus arbitration, and state-machine replacement in industrial, military, and avionics systems designed in the late 1980s and 1990s. Key features include 16 macrocells, 300 gates of usable logic, 35ns worst-case tPD, 100 MHz internal fCNT, 5V ±5% supply operation, and JEDEC-standard 24-pin PDIP packaging. The device supports synchronous and asynchronous clocking, programmable I/O architecture with output enable, and a 100% factory-tested AC performance specification. The -35 speed grade positions this part at the slower end of the EP610 family; faster -25 and -20 grades exist for timing-critical paths. Technically, the EP610 family uses a Classic macrocell architecture with sum-of-products logic feeding a programmable output register. The 24-pin PDIP footprint is a JEDEC-standard 0.600" wide plastic DIP with through-hole leads, making the EP610PC-35 suitable for socketed designs, hand-prototyping breadboards, and legacy board repair. Parts are tested and re-qualified by Rochester Electronics against the original Altera specifications to provide form-fit-function continuity. Typical applications include legacy industrial control replacement, address decoding for 8/16-bit microprocessor buses, state-machine implementation for instrumentation, and pin-compatible second-source for end-of-life designs. The UV-erasable window variant (EP610DC) and one-time-programmable plastic versions share the same logic and timing. When designing with this part, note that it is not pin-compatible with modern low-voltage CPLDs (3.3V or 1.8V). Use it only where 5V I/O, original Altera EP610 footprints, or long-term military/industrial sustainment programs require it. Modern low-cost alternatives from Lattice (GAL/iCE40) require PCB rework. This page synthesizes distributor pricing, Rochester sustainment lead times, and practical cross-references not found in the original Altera datasheet, with drop-in alternatives sourced from verified EP610-family listings.

RFQ Kontak
EP610PC25 - 16-Macrocell Classic EPLD, 25ns, PDIP-24 | Altera
EP610PC25

EP610PC25 - 16-Macrocell Classic EPLD, 25ns, PDIP-24 | Altera

The Altera EP610PC25 is a 16-macrocell Classic-series Erasable Programmable Logic Device (EPLD) in a 24-pin plastic DIP (PDIP-24) package, with a propagation delay of 25 ns and pipelined data rates up to 100 MHz. Fabricated in 5 V CMOS, this OTP-EPLD delivers 300 usable gates of low-density glue logic in a through-hole form factor still favored for legacy industrial, instrumentation, and educational designs. The Classic EPLD architecture combines AND/OR logic with per-macrocell flip-flops, making it functionally similar to a small array of PAL-type devices integrated into a single package. An EPLD (Erasable Programmable Logic Device) is a one-time- or UV-programmable non-volatile logic device that preceded modern CPLDs and FPGAs. EPLDs sit in the PLD hierarchy above simple PAL/GAL devices but below today's high-density FPGAs - useful as glue logic, address decoding, state machines, and bus interface controllers. Within the broader taxonomy, EPLDs fall under programmable logic devices (PLDs) -> CPLDs -> programmable semiconductors, and they share architecture with later MAX-series CPLDs while retaining the Classic-series' distinctive 24-pin PDIP footprint. Key features of the EP610PC25 include 16 macrocells (each with a programmable flip-flop), 24 dedicated input pins, 16 output pins, and pin-compatible JEDEC-standard programming via standard device programmers. The 25 ns tPD allows clocked logic up to ~40 MHz (synchronous), while pipelined internal paths support up to 100 MHz. Power consumption is approximately 200 mA ICC at 5 V, and the device operates over the commercial 0C to +70C range. The PDIP-24 through-hole package allows easy socket-mounting and rework, valuable in lab and production-line environments. Architecturally, the EP610PC uses a sum-of-products AND-OR logic array feeding 16 macrocells, each with a configurable D/T/JK flip-flop and output enable. Inputs feed through a global interconnect to the AND array, and outputs drive bidirectional I/O pins. Programming is performed via a standard JEDEC fuse map on a device programmer using Altera's classic flow. The Classic EPLD family was a precursor to the MAX 7000/5000-series CPLDs that subsequently dominated low-density programmable logic. Typical applications include address decoding for 8-bit and 16-bit microprocessors, glue logic for peripheral interfacing, state machines in industrial controllers, bus arbitration logic in VME/ISA-style backplanes, and replacement of multiple discrete 74LS/74HC TTL gates in legacy systems. The DIP-24 footprint makes it popular in educational lab kits and in long-life-cycle equipment where surface-mount migration is undesirable. When designing with this device, note that it requires a 5 V supply and a programming voltage of 12 V on the VPP pin. A proper decoupling scheme (100 nF + 10 uF bulk) near the supply pins is mandatory, and unused inputs should be tied to ground through a resistor or to VCC to prevent floating inputs. Designers transitioning from the EP610PC to newer logic should consider the pin-compatible LC/LI/DC speed grades or migrating to a modern MAX II CPLD in a JTAG-programmable package.

RFQ Kontak
EP610PI-25 - 16-Macrocell Classic EPLD, 25ns DIP-24 | Rochester
EP610PI-25

EP610PI-25 - 16-Macrocell Classic EPLD, 25ns DIP-24 | Rochester

The Rochester Electronics EP610PI-25 is a member of the Altera Classic EP610 family of Erasable Programmable Logic Devices (EPLDs), supplied in a 24-pin ceramic DIP (PI) through-hole package with a 25 ns pin-to-pin propagation delay. It integrates 16 macrocells and approximately 300 usable gates of combinational and sequential logic on a single CMOS die, making it a compact glue-logic replacement for multiple 74LS/74HC discrete devices in legacy industrial, telecom, and instrumentation designs. A Programmable Logic Device (PLD) is a general-purpose digital IC whose logic function is defined after manufacture by the user, sitting in the broader hierarchy of programmable logic between simple PAL/GAL arrays and modern CPLD/FPGA fabrics. The Classic EP610 family represents an early generation of CMOS UV-erasable EPLDs that consolidated several PAL-equivalent macrocells into a single AND/OR array with per-macrocell flip-flop and output enable control. The 'P' suffix designates the plastic/ceramic DIP package, the 'I' indicates the industrial operating temperature range, and the '-25' suffix specifies the 25 ns tPD speed grade, which is the slowest of the family and well suited to bus-interface and control-logic applications running below ~40 MHz. Key features of the EP610PI-25 include 16 macrocells, four dedicated inputs, 16 bidirectional I/O pins in the 24-pin DIP, output macrocell flip-flops with configurable D/T/JK/SR modes, programmable output enable per macrocell, and a single global clock. Architecture is based on a sum-of-products (AND-OR) PLA with each macrocell feeding one bidirectional I/O pin. The device is non-volatile (UV-erasable) and offers deterministic 25 ns propagation delay that does not depend on routing density, an advantage over later channel-routed CPLDs. Power consumption is typically under 200 mW at 5 V, and the part is 100% pin-compatible with the EP610PI-20 and EP610PI-15 faster speed grades, allowing direct in-circuit speed upgrade. Typical applications include legacy bus-interface decoding (8086, 68000, Z80 address decode and glue logic), industrial control state machines, telecommunications channel-bank control, instrumentation address decoding, and as a pin-compatible replacement for multiple PAL/GAL devices in legacy aerospace and military systems. The DIP-24 through-hole footprint also supports easy breadboarding and socketed replacement in maintenance scenarios. When designing with the EP610PI-25, use the Altera MAX+PLUS II (legacy) or A+PLUS development environment for schematic/VHDL/Verilog entry, and ensure the JTAG/programming socket allows UV erasure (windowed packages). Provide a clean 5 V ±5% supply and decouple VCC with a 0.1 µF ceramic capacitor adjacent to the IC. Note that modern 5 V-tolerant CPLDs such as the MAX II family offer much higher density but at a different pinout; the EP610PI-25 is a true drop-in for legacy EP610 designs only. This page synthesizes legacy Rochester Electronics distributor pricing, drop-in EP610 family alternatives that share the DIP-24 footprint, and practical design notes for maintaining legacy EPLD designs not found in the original Altera datasheet.

RFQ Kontak
EP610PI-30 - 16-Macrocell Classic EPLD, 30ns, PDIP-24
EP610PI-30

EP610PI-30 - 16-Macrocell Classic EPLD, 30ns, PDIP-24

The Intel (originally Altera) EP610PI-30 is a high-performance Classic EPLD (Erasable Programmable Logic Device) in the EP610 family, packaged in a 24-pin PDIP with 16 macrocells, 300 usable gates, and a 30 ns pin-to-pin propagation delay. It is built on CMOS EEPROM technology, is one-time-user-programmable (UV-erasable windowless package), and supports pipelined data rates up to 100 MHz while consuming only CMOS-level standby current. A Classic EPLD is an early-generation programmable logic device that sits between discrete 74-series glue logic and modern CPLDs/FPGAs in the programmable logic hierarchy: discrete logic -> PAL/GAL -> EPLD -> CPLD -> FPGA -> SoC FPGA. The EP610 family replaced fuse-link bipolar PALs with CMOS EEPROM cells, providing reprogrammability, lower power, and predictable timing - the macrocell architecture gives every output a fixed, deterministic propagation delay independent of logic complexity, which is the key advantage over early FPGAs. Key features of the EP610PI-30 include 16 macrocells, 4 dedicated inputs, 10 I/O pins, 2 global clock inputs, in-system programmable EEPROM configuration memory, and a 5 V single supply with CMOS/TTL-compatible I/O. The PI-30 speed grade corresponds to a 30 ns tPD (worst-case commercial), making the part suitable for asynchronous glue-logic replacement, address decoding, state-machine control, and bus-interface adaptation up to roughly 33 MHz non-pipelined / 100 MHz pipelined operation. Architecturally the EP610 uses sum-of-products logic feeding output macrocells with programmable register/bypass modes, plus a global interconnect. Because every macrocell has a fixed, deterministic delay, the device eliminates the place-and-route timing closure step that complicates FPGA design - the user simply writes Boolean equations and the timing is known by inspection. The EEPROM process retains the bitstream for 20+ years and supports 100+ reprogram cycles. Typical applications include asynchronous state-machine controllers in industrial PLCs, address-decoding and chip-select logic in 5 V microcomputer systems, bus arbitration and glue logic between 8/16-bit microprocessors and peripherals, and replacement of legacy 74LS/74F series TTL gate arrays. Designers often select the EP610 family to consolidate dozens of SSI/MSI packages onto a single, factory-programmed part. When designing with the EP610PI-30, ensure that all inputs respect the 5 V CMOS/TTL logic thresholds (VIL <= 0.8 V, VIH >= 2.0 V) and that outputs are not loaded beyond the 24 mA sink/source rating per pin. A 0.1 uF decoupling capacitor should be placed within 5 mm of the VCC pin. Programming requires an Altera/Intel-compatible device programmer such as the Altera MAX+PLUS II flow; this device is no longer recommended for new designs but remains supported by Rochester Electronics as a long-life buy. This page synthesizes distributor stock, parametric cross-references, and practical design notes beyond the original manufacturer datasheet to help engineers evaluate, source, and apply the EP610PI-30 in legacy 5 V systems.

RFQ Kontak
EP610SC-15 - 16-Macrocell Classic EPLD, 15ns tPD | Altera (Intel)
EP610SC-15

EP610SC-15 - 16-Macrocell Classic EPLD, 15ns tPD | Altera (Intel)

The Altera (now Intel) EP610SC-15 is a member of the Altera Classic EPLD family, integrating 300 usable gates and 16 macrocells into a 24-pin small-outline (SOP/SOIC-24) package with a 15 ns pin-to-pin propagation delay. Operating from a single 5 V supply (4.75 V to 5.25 V), the part provides a CMOS-compatible, UV-erasable EPLD architecture intended for high-speed, low-power logic integration that replaces multiple TTL/CMOS SSI/MSI gates. An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device sitting between simple PAL/GAL architectures and modern FPGAs/CPLDs in the programmable logic hierarchy. The Classic family uses a sum-of-products AND/OR structure with a programmable macrocell, allowing designers to implement glue logic, state machines, address decoding, and bus interfacing in a single chip that retains its configuration when power is removed. This product category sits between discrete 74-series logic gates and modern complex programmable logic devices (CPLDs), offering deterministic 15 ns timing without the need for JTAG or in-system programming. Key features include a maximum operating frequency in the tens of MHz range (fMAX around 83 MHz typical for the -15 speed grade), 24 input/output pins, 16 macrocells, low CMOS standby current, and a JEDEC-standard 24-pin 300-mil SOIC package. The part supports both combinatorial and registered logic modes through its macrocell flip-flop, with independent feedback paths into the AND array. Programming is performed via a standard EPROM-style algorithm and the configuration is erased with a UV window (the ceramic-windowed variants such as the EP610LC series), while the 'SC' commercial plastic package is one-time-programmable for production volumes. Typical applications include TTL/CMOS logic replacement, bus address decoding and chip-select generation, state machines for peripheral controllers, encoder/decoder logic, and interface glue between microprocessors and peripherals. Its deterministic 15 ns timing and 5 V interface make it especially suitable for legacy industrial control boards, telecommunications backplane cards, and instrumentation front-ends that require bus-interface logic without software-driven PLD configuration. When designing with the EP610SC-15, ensure that the 24-pin SOP land pattern matches the JEDEC SO-24 300-mil footprint. Decoupling should include a 0.1 µF ceramic capacitor as close as possible to the VCC and GND pins. Designers migrating to lower-density CPLDs from Lattice or Xilinx should verify pinout compatibility because the EP610's pin ordering is specific to the Classic family. This page consolidates distributor pricing, drop-in speed-grade alternatives within the EP610 family, and practical design notes beyond the manufacturer datasheet.

RFQ Kontak
EP610SC-20 - 16-Macrocell Classic EPLD, 22ns, 5V, SOIC-24
EP610SC-20

EP610SC-20 - 16-Macrocell Classic EPLD, 22ns, 5V, SOIC-24

The Altera (Rochester Electronics) EP610SC-20 is a 16-macrocell Classic-family Erasable Programmable Logic Device (EPLD) delivering pipelined data rates up to 100 MHz with a 22 ns propagation delay, housed in a 24-pin plastic small-outline (SOIC-24 / PDSO24) package. Originally an Altera-classic part, the EP610SC-20 is now manufactured/re-distributed by Rochester Electronics as an authorized source for legacy EPLD demand, with active lifecycle status and 300 gate equivalents at 5V CMOS operation. An EPLD (Erasable Programmable Logic Device) is a non-volatile reprogrammable logic device that sits in the programmable logic hierarchy between simple PAL/GAL devices and modern CPLDs/FPGAs. Classic EPLDs use EPROM cells to store the configuration, providing true non-volatile instant-on behavior without external boot memory. The EP610 family belongs to Altera's first-generation classic architecture, later succeeded by MAX-series CPLDs, and is often specified for long-lifecycle industrial, telecom, and aerospace systems where modern FPGAs are unacceptable for legacy reasons or where instant-on logic glue is required. Key features of the EP610SC-20 include 16 macrocells (24-pin logic capacity), 22 ns tPD combinational delay enabling 100 MHz pipelined operation, 5V CMOS I/O, and 300 gate equivalent density. The 24-pin SOIC package offers easy through-hole-compatible SMT assembly and supports JTAG-free ISP via Altera's classic programming algorithm using dedicated programming pins. Power consumption is moderate for the 5V CMOS process, and the device is specified over commercial and industrial temperature grades depending on sub-variant. The EP610SC-20 uses Altera's classic EPLD architecture with EPROM-configured AND/OR arrays feeding 16 flip-flop-equipped macrocells. Each macrocell offers configurable D/T/JK flip-flop polarity, feedback paths, and output enable control. With 22 ns tPD and registered throughput up to 100 MHz, the architecture targets glue-logic, address decoding, state-machine, and bus-interface applications that benefit from instant-on non-volatile configuration. The CMOS EPROM cell provides bit-level reprogrammability with UV-windowed ceramic variants historically available for engineering development. Typical applications include legacy industrial control board replacement, telecom infrastructure glue logic, address decoding and bus arbitration in 5V embedded designs, 5V state machines, and military/aerospace sustainment programs that require drop-in Altera-classic form-fit-function continuity. Rochester Electronics' ongoing manufacture makes the EP610SC-20 a viable long-term sustainment part. When designing with this device, ensure your design fits within the 16 macrocell and ~300 gate-equivalent logic capacity, as overflow requires logic partitioning across multiple devices. Verify the 5V VCC tolerance of downstream logic since 5V CMOS outputs may exceed 3.3V tolerance of newer devices. This page synthesizes distributor pricing, Rochester Electronics lifecycle status, drop-in EPLD alternatives, and practical design notes not found in the original Altera datasheet alone.

RFQ Kontak
EP9100C-30 - 900 Gates Classic EPLD, 30ns CMOS | Intel / Altera
EP9100C-30

EP9100C-30 - 900 Gates Classic EPLD, 30ns CMOS | Intel / Altera

The Intel / Altera EP9100C-30 is a member of the Altera Classic EPLD (Erasable Programmable Logic Device) family, fabricated on advanced CMOS technology and offered in a commercial 30 ns pin-to-pin propagation delay speed grade. The EP9100C-30 integrates approximately 900 usable gates of programmable logic with 48 macrocells and 24 flip-flops, packaged in a 40-pin ceramic DIP (J-Lead CDIP option also available) footprint commonly seen in legacy Altera Classic EPLDs. The Classic family provides high-speed, low-power logic integration for glue-logic, decoder, state-machine, and bus-interface applications that predate modern CPLD/FPGA architectures. A Classic EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-style macrocell arrays on a single CMOS die, erasable via ultraviolet light (windowed packages) or one-time-programmable (OTP) in ceramic DIP form. In the broader taxonomy, EPLDs sit below CPLDs (Complex PLDs) and FPGAs (Field-Programmable Gate Arrays); they are predecessors to today's MAX II/MAX V CPLD families from Intel (formerly Altera). EPLDs offer deterministic pin-to-pin timing, predictable interconnect delays, and instant-on operation because the configuration is stored in non-volatile memory rather than loaded from an external flash at boot. Key features of the EP9100C-30 include a 30 ns combinatorial propagation delay (tPD), a maximum toggle frequency of 62.5 MHz (from the -30 speed grade), 48 macrocells with 24 flip-flops, 24 dedicated input pins, and I/O organized around a Programmable Interconnect Array (PIA). The device supports 5 V single-supply operation (VCC = 4.75 V to 5.25 V), TTL-compatible inputs and outputs, and offers three speed grades (-20, -25, -30, -35) plus a military / MIL-STD-883 variant (EP9100C-30/883). Programming is performed via the Altera Altera Programming Unit (APU) or compatible third-party programmers using the JEDEC fuse-map format. The EP9100 architecture uses a sum-of-products (AND-OR) macrocell fed by a global Programmable Interconnect Array. Each macrocell contains a programmable AND array, a fixed OR array, an output flip-flop with programmable clock/clear/preset controls, and an I/O pin with tri-state control. Compared to PAL/GAL devices, the EP9100 adds the PIA, which routes any input or feedback signal to any macrocell - enabling true sum-of-products logic for any function. Compared to modern MAX V CPLDs, the EP9100C-30 has lower logic density and slower speeds, but its instant-on non-volatile architecture and 30-year production heritage make it a reliable choice for legacy equipment sustainment and aerospace/defense systems where re-design qualification is costly. Typical applications include legacy industrial controller glue logic, address decoding for 8086/68000 microprocessor systems, state-machine replacement of discrete 74LS logic, TTL-to-CMOS bus bridging, and aerospace/defense equipment with established reliability data. The EP9100C-30 is also widely used as a drop-in replacement for discrete SSI/MSI logic clusters in 5 V designs where power, board area, and reliability improvements are needed. When designing with the EP9100C-30, ensure the input rise/fall times are faster than 100 ns to prevent additional propagation delay, and derate outputs according to the DC output current vs. VCCOL curves in the datasheet. Use a bypass capacitor of at least 0.1 µF close to each VCC pin to suppress switching transients on the global PIA clock network. For new designs, consider the Intel MAX V CPLD family (e.g., 5M80ZE64) as a modern equivalent with more density and lower power; however, the EP9100C-30 remains preferred for legacy 5 V systems with established firmware/silicon qualification. This page synthesizes distributor availability, JEDEC-spec parametric comparison data, and practical design notes not consolidated in the original Altera Classic EPLD datasheet.

RFQ Kontak
EP910DC-15 - Classic EPLD 900 Gates 15ns DIP-24 | Altera
EP910DC-15

EP910DC-15 - Classic EPLD 900 Gates 15ns DIP-24 | Altera

The Altera EP910DC-15 is a member of the Classic EPLD (Erasable Programmable Logic Device) family, providing high-speed, low-power CMOS logic integration in a 24-pin ceramic DIP (DC) package. The device is speed grade 15, indicating a 15 ns maximum pin-to-pin propagation delay, and is specified for the commercial operating temperature range. Built on advanced CMOS EPROM technology, the EP910 delivers approximately 900 usable gates of combinatorial and registered logic for glue-logic, bus decoding, state-machine, and address- decoding applications that previously required multiple discrete TTL or CMOS SSI/MSI parts. An EPLD (Erasable Programmable Logic Device) is a one-time- or UV-erasable non-volatile programmable logic IC from the late-1980s/early-1990s era, sitting in the device hierarchy between simple PAL/GAL SPLDs and modern SRAM-based FPGAs. EPLDs integrate multiple AND/OR arrays, programmable macrocells, and a fixed interconnect into a single package, giving designers higher density and predictable timing compared to discrete 22V10-style PALs while remaining simpler and cheaper than contemporary FPGAs. Altera's Classic family extended this concept by sharing a uniform macrocell architecture across EP310, EP320, EP610, EP910, EP1800 and EP1810 densities, allowing seamless design migration through the same toolchain. Key features of the EP910DC-15 include 24 macrocells, 12 dedicated inputs, 12 bidirectional I/O pins, 10 flip-flops, 24 product terms per macrocell, and a 15 ns tPD. The device is erasable via a quartz window (ceramic DIP package only), enabling prototype iteration and field re-programming on the same silicon. I/O structures are TTL-compatible and the part supports either 5V-only or, on later die revisions, 5V/3.3V mixed-voltage operation, making it suitable for bridging legacy and modern logic rails in brownfield designs. A logic-lock feed-through path and pin-keeper circuits reduce external glue requirements. Architecturally, the EP910 implements a sum-of-products PLA structure feeding a flexible output macrocell. Each macrocell contains a programmable flip-flop, output enable, and feedback path that can be reconfigured post-fit to implement D/T/JK flip-flops, latches, or pure combinatorial output with selectable polarity. This uniform architecture yields predictable, deterministic timing - a key reason Classic EPLDs were preferred over early SRAM-based FPGAs for control logic where tCO and tSU needed to be fixed at compile time. Power consumption is approximately 200-400 mW active at 25 MHz, depending on utilization and toggle rate, and drops to a low CMOS standby in idle. Typical applications include address decoding and chip-select generation in 8086/68k/MIPS-based microprocessor systems, bus arbitration, DRAM/VRAM control logic, channelized interface glue between legacy peripherals, firmware state machines for disk controllers, and industrial PLC ladder-logic replacement. The 24-pin DIP form factor is also convenient for through-hole prototype boards, educational labs, and legacy equipment repair where surface-mount adapters would be impractical. When designing with the EP910DC-15, treat the 15 ns tPD as a hard budget: derive fMAX from the registered tCO + logic + tSU path and de-rate by 20% for setup margin. Decouple VCC with a 0.1 uF ceramic plus 10 uF tantalum placed within 5 mm of the pins, and reserve the unused macrocells as outputs driving a known state to avoid bus contention during ISP. For new designs, prefer Altera MAX II or Lattice ispMACH 4000 families; the EP910DC-15 is recommended only when matching an existing pinout or repairing installed equipment. This page synthesizes distributor pricing snapshots, same-brand and cross-brand drop-in alternatives, and practical design notes not assembled on any single manufacturer or distributor datasheet.

RFQ Kontak
EP910DC-30 - 900-Gate UV EPLD, 24 Macrocells, DIP-40 | Altera / Intel
EP910DC-30

EP910DC-30 - 900-Gate UV EPLD, 24 Macrocells, DIP-40 | Altera / Intel

The Altera / Intel EP910DC-30 is a 900-gate CMOS UV-erasable / OTP Erasable Programmable Logic Device (EPLD) from the Classic EPLD family, packaged in a 40-pin ceramic or plastic DIP and rated for 30 ns pin-to-pin propagation delay (the "-30" speed grade). The part delivers 24 macrocells interconnected through a global programmable interconnect, supports two external clock inputs, and offers 36 dedicated input pins plus 24 output macrocells for I/O. It is the largest member of the EP910 family and is typically used as a glue-logic replacement for multiple 22V10-style PALs. What is an EPLD? An EPLD (Erasable Programmable Logic Device) is a member of the Programmable Logic Device (PLD) family that sits in the taxonomy between simple PAL/GAL (Programmable Array Logic / Generic Array Logic) and full FPGAs. EPLDs use a sum-of-products AND-OR architecture with a fixed OR array, providing deterministic, glitch-free combinatorial and registered logic at modest gate counts (100 to a few thousand gates). EPLDs hold a special role in the modern logic-device hierarchy: PLD -> EPLD -> CPLD -> FPGA, where EPLDs and CPLDs are favored for fast pin-to-pin timing, predictable I/O behavior, and instant-on power-up with no external configuration memory. The EP910's classic AND-OR plane makes it well suited to state machines, address decoding, and interrupt control logic where timing predictability matters more than raw density. Key features of the EP910DC-30 include 33.3 MHz maximum flip-flop toggle frequency, 30 ns tPD / 25 ns tCO combinational timing, 24 macrocells with configurable D/T/JK flip-flops, individually programmable output macrocells with tri-state control, and CMOS low-power operation with 5 V supply. The UV-erasable windowed package permits laboratory prototyping and design iteration, while the OTP variant supports production programming. The EP910 architecture uses Altera's second-generation Classic EPLD macrocell, which combines a programmable product-term array feeding a configurable flip-flop and output cell. Logic is implemented as sum-of-products equations compiled by Altera's MAX+PLUS II or later Quartus tools (legacy Classic device support), with JEDEC fuse-map programming. Outputs support four user-selectable configurations (registered, combinatorial, tri-state, open-drain options per macrocell). Typical applications include PDP-11 / VMEbus / Multibus address decoding, 24/32-bit microprocessor glue logic replacement of 74LS/74F logic, peripheral controller state machines, asynchronous bus interface adapters, and legacy industrial control retrofits where timing-deterministic logic outperforms SRAM-based FPGAs. When designing with the EP910DC-30, remember that the DIP-40 footprint imposes a fixed 600-mil row spacing; allocate board area accordingly, and route the two dedicated clock pins (CLK1/CLK2) with controlled impedance if used at the 33.3 MHz toggle rate. Outputs are 5V TTL-compatible but the inputs tolerate TTL thresholds; no 3.3V tolerance exists, so use a level translator when interfacing to modern 3.3V logic. This page synthesizes distributor pricing, drop-in same-package alternatives from the EP910/EP610 family, and practical design notes not found on a single distributor listing.

RFQ Kontak
EP910DC-35 - 35ns 900-Gate CMOS UV PLD DIP-40 | Intel / Altera
EP910DC-35

EP910DC-35 - 35ns 900-Gate CMOS UV PLD DIP-40 | Intel / Altera

The Intel / Altera EP910DC-35 is a 35ns propagation-delay UV-erasable CMOS Programmable Logic Device (PLD) from the Classic EPLD EP910 family, packaged in a 40-pin ceramic DIP (CDIP-40) with through-hole leads. It delivers 900 usable gates, 24 macrocells, 36 inputs (12 dedicated + 24 I/O lines) and 24 outputs, with 240 product terms available for sum-of-products logic implementation at a maximum clock frequency of approximately 37 MHz. The device operates from a single 5V supply (4.75V to 5.25V) over the commercial 0°C to 70°C temperature range. A Programmable Logic Device (PLD) is a digital integrated circuit whose internal AND/OR array and output macrocell logic can be configured by the user to implement arbitrary combinational and registered Boolean functions, replacing discrete SSI/MSI gate packages. PLDs sit beneath FPGAs in the programmable-logic hierarchy and are subdivided into PAL-type (one-time programmable or UV-erasable), GAL/EPLD (electrically erasable CMOS) and CPLD (complex PLD, multiple macrocell blocks with central interconnect) families. The EP910 sits at the high end of the Classic EPLD family, providing register-intensive glue-logic integration for bus interface, address decoding and state-machine consolidation. Key features of the EP910DC-35 include 35ns pin-to-pin propagation delay (the slowest speed grade of the EP910DC series), 24 flip-flop-equipped macrocells, JEDEC-standard fuse-map programming, a UV-erasable quartz window on the ceramic package for development iteration, and TTL-compatible I/O. Architecturally the EP910 uses a sum-of-products AND-OR array feeding a flexible macrocell block that can be configured as D, T, JK or SR flip-flop, or as combinational output with selectable polarity. The device is specified at 5V ±5% with 5.25V absolute maximum. Typical applications include TTL/CMOS logic consolidation on VMEbus and Multibus adapter cards, address decoding for 8086/68000/80386 microcomputer boards, peripheral controllers (DMA, interrupt, wait-state generation), industrial state machines, and replacement of legacy 24-pin PAL glue-logic clusters. The ceramic DIP-40 windowed package makes the part especially suitable for prototype and low-volume production where in-house UV erase and reprogram cycles are practical. Design consideration: the ceramic DIP-40 quartz-windowed package requires a UV eraser for reprogramming (typically 20-30 minutes of 12,000 µW/cm² short-wave UV). Production users should migrate to the OTP plastic DIP variant (EP910PC-35) once logic is frozen, or to the pin-compatible but electrically erasable 5ns MAX-class CPLD family when higher density is required. This page synthesizes distributor stock and pricing, drop-in EP910 speed-grade alternatives from the same Classic EPLD family, and practical design notes that are not assembled in any single manufacturer datasheet, helping engineers source or substitute this legacy part with confidence.

RFQ Kontak
EP910DC-40 - 24-Macrocell UV EPLD, 25 MHz, DIP-40 | Altera
EP910DC-40

EP910DC-40 - 24-Macrocell UV EPLD, 25 MHz, DIP-40 | Altera

The Altera EP910DC-40 is a UV-erasable, 24-macrocell Erasable Programmable Logic Device (EPLD) from the Classic EP910 series, supplied in a 40-pin ceramic DIP package and rated for 40 ns propagation delay with up to 25 MHz maximum operating frequency. It integrates 24 macrocells interconnected through a global programmable interconnect, with 12 dedicated inputs and 24 bidirectional I/O pins delivering a combined 36 inputs to the logic array. An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that fuses the architectural simplicity of PAL-type logic with the re-programmability of UV-erasable EPROM cells. Within the broader taxonomy, EPLDs sit between simple SPLDs (such as PALs and GALs) and modern FPGAs, offering deterministic combinational and registered logic, predictable timing, and erasable programmability at the cost of lower density than an FPGA. The EP910 family belongs to the Classic EPLD category introduced by Altera in the 1980s and remains in service today for legacy industrial and military refresh designs. Key features of the EP910DC-40 include a maximum propagation delay of 40 ns (commercially graded; the -40 suffix indicates 40 ns tPD), an internal global interconnect that links all 24 macrocells through a single unified bus, up to 240 product terms distributed across the array, two dedicated global clock inputs for synchronous sequential logic, and on-board logic test circuitry enabling AC specification verification during standard production flow. The part is built on a CMOS process that consumes modest power compared with bipolar PAL alternatives of the same era. Architecturally, the EP910DC-40 uses a PAL-type AND/OR structure in each macrocell. Combinational logic is implemented via AND-plane product terms feeding an OR gate that drives the macrocell output, while registered operation is achieved by routing the OR-plane result through a configurable D flip-flop clocked from one of the two global clock inputs. The 24 I/O pins share connections to both the input array and the macrocell feedback network, allowing pin and feedback resource pooling that maximizes logic utilization per device. Typical applications include legacy glue logic replacement (replacing multiple 24-pin PALs with a single EPLD), bus-interface adaptation (synchronizing 8-bit and 16-bit buses with predictable timing), address decoding for microprocessor and microcontroller systems, industrial control boards that require ceramic-DIP through-hole packages for harsh environments, and military/aerospace refresh programs where the ceramic DIP form factor and Altera Classic EPLD pinout are mandated. Designers should note that the DIP-40 ceramic package has long lead times and a shrinking authorized-distribution channel. Most surviving stock is broker or aftermarket; for new designs engineers typically migrate to Altera MAX II CPLDs or modern Lattice ispMACH CPLDs that provide denser, in-system-programmable, and RoHS-compliant equivalents with similar 5V tolerant I/O characteristics. This page synthesizes distributor pricing, drop-in Classic EPLD alternatives, and practical design notes that are not collated in the original Altera datasheet.

RFQ Kontak
EP910DI-30 - 24-Macrocell EPLD, 30ns, CDIP-40 | Altera (Rochester)
EP910DI-30

EP910DI-30 - 24-Macrocell EPLD, 30ns, CDIP-40 | Altera (Rochester)

The Altera EP910DI-30 is a UV-erasable Classic EPLD (Erasable Programmable Logic Device) built on a 24-macrocell CMOS array, housed in a 40-pin ceramic DIP (CDIP-40) package and rated for 30 ns pin-to-pin propagation delay. It belongs to the legacy Classic EPLD family that Altera introduced in the late 1980s as one of the industry's first commodity programmable logic products, predating the modern CPLD and FPGA generations. A programmable logic device (PLD) is a general-purpose digital IC whose logic function is set by the end user via on-chip fuses, anti-fuses, EPROM, EEPROM, or SRAM configuration cells. EPLDs sit in the product-type hierarchy: programmable logic device -> erasable PLD -> complex PLD (CPLD) -> semiconductor -> integrated circuit. They were historically used as glue logic, address decoding, state machines, and bus-interface bridges before modern FPGAs and CPLDs took over most of those roles. Key features of the EP910DI-30 include 24 macrocells, 50% of which are user-configurable as registered or combinatorial outputs, 10 dedicated input pins, 12 dedicated I/O pins, and a maximum toggle frequency of 62 MHz. The device operates from a single 5 V supply and is windowed (UV-erasable) for design iteration - it must be removed from the circuit and exposed to UV light to erase. The 30 ns speed grade suits asynchronous state machines, address decoders, and bus-interface logic in legacy 5 V systems. The 40-pin ceramic DIP package is a through-hole form factor with a quartz window on top for erasure, and provides robust thermal and mechanical performance suitable for industrial and military temperature grades. Because the part is supplied through Rochester Electronics (the authorized aftermarket manufacturer for legacy Altera EPLDs), it is targeted at long-lifecycle programs that must keep a 20-30 year production run alive. Typical applications include legacy bus-interface bridging (e.g., 8-bit to 16-bit address demultiplexing), glue logic in industrial controllers, replacement of discrete TTL/MSI logic in avionics and military systems, and state-machine controllers in medical and test equipment where redesign is impractical. Because of the CDIP-40 footprint and 5 V supply, the EP910DI-30 drops directly into boards originally designed for the EP910 family. When designing with this device, engineers should note that modern design tools no longer natively support the EP910 family - programming is typically done with legacy Altera hardware or third-party JEDEC-file programmers. The 5 V supply rail should be well decoupled with 0.1 uF ceramic capacitors adjacent to each VCC/GND pair, and unused inputs must be tied to VCC or GND through a defined logic level rather than left floating. This page synthesizes Rochester Electronics distributor stock data, JEDEC-file programming considerations, and drop-in alternatives for the Classic EPLD family - practical engineering context not found in the original manufacturer datasheet alone.

RFQ Kontak
EP910DI-35 - 24-Macrocell EPLD, 35ns, CDIP-40 | Altera/Rochester
EP910DI-35

EP910DI-35 - 24-Macrocell EPLD, 35ns, CDIP-40 | Altera/Rochester

The Altera EP910DI-35 is a Classic EPLD (Erasable Programmable Logic Device) featuring 24 macrocells and 450 usable gates in a 40-pin ceramic DIP (CDIP) through-hole package. The 'DI' suffix denotes the industrial-temperature-range ceramic DIP form factor, and the '35' speed grade indicates a 35 ns propagation delay (tPD). It is an ultraviolet-erasable CMOS PLD from Altera's original Classic EPLD family, manufactured today as a long-life-cycle replacement by Rochester Electronics. The EP910 family sits between the smaller EP900 (16 macrocells) and the larger EP1800 (48 macrocells), filling the popular 24-macrocell mid-density niche for glue-logic, decoder, and bus-interface applications. What is an EPLD? An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that uses EPROM (UV-erasable) or EEPROM technology to store AND/OR logic arrays. EPLDs belong to the broader programmable logic hierarchy: PLD -> CPLD -> FPGA. They provide deterministic pin-to-pin timing, low power consumption, and instant-on behavior with no configuration load step, distinguishing them from SRAM-based FPGAs. Each macrocell combines a programmable AND array feeding an OR term with a configurable flip-flop, providing both combinational and registered outputs. Key features of the EP910DI-35 include 24 macrocells, 10 dedicated input pins, 20 I/O pins (bidirectional), 450 usable gates, a 35 ns maximum pin-to-pin propagation delay, and a 28.6 MHz toggle frequency (fCNT). The device operates from a single 5 V supply (VCC = 4.75 V to 5.25 V) and is fabricated in CMOS technology for low power (Icc typically 40 mA). The CDIP-40 package includes a quartz window on the top of the ceramic body for UV erasure of the EPROM cell array. Architecturally, the EP910 implements a PAL-type AND/OR structure with each macrocell offering a sum-of-products expression plus an optional D flip-flop. Output enable, preset, and clear signals are globally controlled. The 24 macrocells share a common programmable interconnect array optimized for predictable timing, making the part well-suited for state machines, address decoding, and bus arbitration. Typical applications for the EP910DI-35 include bus-interface glue logic in industrial 5 V backplanes, address decoders for microprocessor systems, register/buffer insertion between legacy peripherals, control logic in telecom and military systems requiring ceramic-package reliability, and replacement of multiple 74-series TTL gates. Its industrial -40C to +85C temperature range and ceramic CDIP package make it especially useful where the original Altera die must be sourced through a long-term authorized manufacturer. When designing with the EP910DI-35, note that the device requires a 5 V-only supply (not 3.3 V tolerant on inputs), and that the ceramic DIP footprint is identical to the plastic PDIP-40 EP910PI variant, allowing PCB reuse across temperature grades. Programming requires a standard EPROM/PLD programmer (e.g., Data I/O, BP Microsystems) using a JEDEC fuse map generated by Altera's legacy MAX+PLUS II (or the modern Altera/Intel Quartus Classic support). Erasure requires a UV eraser exposing the window for 20-30 minutes at 12,000 uW/cm2. This page synthesizes distributor pricing, drop-in same-package alternatives from the Site MPN list, and practical design notes not consolidated in any single distributor listing.

RFQ Kontak
EP910DM-40 - 24-Macrocell UV EPLD Classic PAL-Type | Altera
EP910DM-40

EP910DM-40 - 24-Macrocell UV EPLD Classic PAL-Type | Altera

The Altera EP910DM-40 is a UV-erasable programmable logic device (EPLD) from the Altera Classic EP910 family, fabricated on advanced CMOS technology and housed in a 40-pin ceramic DIP (Cerdip) package with 40 ns propagation delay. It features 24 macrocells interconnected by a global programmable interconnect bus, 36 dedicated inputs, 24 dedicated outputs, 24 bidirectional I/O lines, and 240 product terms, making it suitable for high-speed, low-power logic integration in glue-logic and state-machine applications. A UV Erasable Programmable Logic Device (EPLD) is a type of programmable logic IC that uses ultraviolet light to erase its configuration before re-programming. EPLDs belong to the broader category of Programmable Logic Devices (PLDs) within the programmable logic semiconductor hierarchy: PLD -> EPLD -> Classic EPLD. The EP910 sits between simpler PAL/GAL devices (typically 8-16 macrocells) and larger CPLDs, providing a balance of logic density and predictable timing. Its PAL-type AND/OR architecture with a global bus provides deterministic pin-to-pin delays, which is why EPLDs remained popular for asynchronous state machines and bus-interface glue logic long after FPGAs became mainstream. Key features include 24 macrocells with user-configurable I/O, a non-volatile UV-erasable configuration memory, 4 dedicated clock inputs supporting two clock domains, and JEDEC-standard fuse-map programming. The EP910DM-40's 40 ns tPD makes it appropriate for control logic running at clock rates up to approximately 20-25 MHz, and its CMOS technology delivers low standby power for always-on systems. Typical applications include address decoding and bus-interface glue logic for microprocessors, asynchronous state machines, custom decoder/replacement logic, and legacy 5V industrial control boards. The DIP-40 ceramic package (windowed Cerdip) allows in-circuit reprogramming via UV erasure, which is valuable for prototyping and field-upgradable equipment. When designing with the EP910DM-40, note that 5V CMOS signal levels are mandatory and that unused I/O pins should be left unconnected or tied per datasheet recommendations. The ceramic DIP-40 (windowed) package retains its UV window for re-erasure, while the plastic OTP variants cannot be re-programmed. This page synthesizes distributor availability, parametric datasheet figures, and Altera EP910 cross-family variant listings that go beyond the standalone EP910 datasheet, helping engineers source and substitute this legacy Classic EPLD part.

RFQ Kontak
EP910DM/883B - Altera Classic EPLD, 24 Macrocells, MIL-883B | Intel / Altera
EP910DM/883B

EP910DM/883B - Altera Classic EPLD, 24 Macrocells, MIL-883B | Intel / Altera

The Intel / Altera EP910DM/883B is a member of the Altera Classic EPLD family that delivers high-speed, low-power CMOS logic integration in a 24-pin ceramic DIP (Cerdip) package. Fabricated on an advanced CMOS process, this part provides 24 macrocells, 10 dedicated input pins, 12 I/O pins, and a maximum propagation delay on the order of nanoseconds, making it suitable for glue-logic, bus decoding, and state-machine replacement in long-life-cycle military and aerospace programs. Background: An EPLD (Erasable Programmable Logic Device) is a type of programmable logic IC that sits in the hierarchy between simple PLDs (PAL/GAL) and larger CPLDs/FPGAs. The classic Altera EPLD family uses UV-erasable or one-time-programmable CMOS cells to implement combinational and registered logic in a single non-volatile device, replacing dozens of 74-series TTL parts with one chip. EPLDs are non-volatile (retain configuration without a bootloader), deterministic in timing, and instantly reconfigurable, which is why they remain preferred for low-density, latency-critical applications and legacy MIL-grade designs. Key features include 24 macrocells with flexible output polarity, 10 dedicated inputs, 12 bidirectional I/O pins, 4 sum-product terms per macrocell, and an in-system programmable architecture (on selected variants). The CMOS process yields typical standby current in the low milliamp range, and the ceramic DIP-24 package supports the MIL-STD-883B environmental and reliability screening that this /883B suffix designates. The EP910DM/883B uses a programmable AND/OR array with output macrocells that can be configured as D, T, JK, or SR flip-flops. This allows designers to implement complex state machines, address decoding, and synchronous glue logic in a single device while preserving deterministic pin-to-pin propagation delays across operating conditions. Typical applications include avionics data-bus controllers, military radar interface logic, naval communication backplanes, industrial-control state machines, and legacy VME/VXI interface adapters. The MIL-STD-883B screening specifically supports high-reliability environments where commercial-grade EPLDs would not meet vibration, thermal, or burn-in requirements. When designing with this device, note that the EP910DM/883B requires a 5V VCC supply typical of the classic EPLD family and a programmer compatible with the Altera Classic architecture. Designers migrating to modern Intel/Altera devices should consider MAX II or MAX V CPLDs as the architectural successors. This page synthesizes distributor pricing, MIL-grade drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Kontak
EP910DM883B - 24-Macrocell CMOS EPLD, 40ns, CDIP-40 | Altera
EP910DM883B

EP910DM883B - 24-Macrocell CMOS EPLD, 40ns, CDIP-40 | Altera

The Altera EP910DM883B is a 24-macrocell Classic-series Erasable Programmable Logic Device (EPLD) fabricated on advanced CMOS technology, offering 36 inputs, 24 outputs, and 240 product terms in a 40-pin ceramic dual in-line (CDIP-40) through-hole package with MIL-STD-883B processing. It is part of the Altera EP910 family of high-speed, low-power PAL-type logic integration devices. What is an EPLD? An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that combines the architectural flexibility of a PLD with erasable (UV-erasable) configuration memory. It sits in the taxonomy: programmable logic -> PLD -> EPLD -> CMOS EPLD. EPLDs were widely used before modern FPGAs and CPLDs became dominant, and remain in service today in legacy industrial, military, and aerospace systems where long-life-cycle, pin-compatible replacements are mandatory. Key features include a typical propagation delay of 40 ns (tPD), a maximum clock frequency of 25 MHz, 24 dedicated macrocells connected via a global interconnect bus, and support for both combinational and registered logic. The PAL-type AND-OR-NOT architecture delivers predictable, deterministic timing. The device operates from a single 5 V supply and is rated across the military temperature range of -55 °C to +125 °C thanks to the /883B MIL-STD screening. The EP910DM883B is housed in a hermetic ceramic DIP-40 (CDIP-40) package that provides exceptional reliability in shock, vibration, and thermal cycling environments. The /883B suffix denotes full MIL-STD-883B Class B processing, including burn-in, temperature cycling, and Hermeticity testing. Typical applications include military and aerospace avionics, industrial control logic glue, legacy interface bridging, and pin-compatible replacement of original Altera Classic EPLDs. The wide temperature range and hermetic package make it ideal for downhole, automotive under-hood, and defense electronics. When designing with this part, engineers should provide a 5 V ±5% supply and route the 40 DIP pins to a 0.1 µF bypass network near the supply pin. UV-erase window programming requires a 12.5 V VPP pulse; for in-system reprogramming, consider a flash-based CPLD as a modern alternative. This page synthesizes distributor pricing, parametric comparison with related EP910/E610 family parts, MIL-STD-883B processing notes, and practical design guidance not found in a single manufacturer PDF.

RFQ Kontak
EP910IDC-15 - 450-Gate, 24-Macrocell Classic EPLD | Altera
EP910IDC-15

EP910IDC-15 - 450-Gate, 24-Macrocell Classic EPLD | Altera

The Altera EP910IDC-15 is a 450-gate, 24-macrocell Classic-family Erasable Programmable Logic Device (EPLD) in a 40-pin ceramic DIP (CDIP) through-hole package, with a 15 ns commercial-speed grade. It operates from a single 5 V supply and integrates 24 macrocells, 48 flip-flops, and a programmable AND/OR logic array, providing TTL-compatible glue-logic, decoder, state-machine, and bus-interface functions on a single chip. What is a Classic EPLD? An EPLD (Erasable Programmable Logic Device) is a UV-erasable CMOS programmable logic device that preceded modern CPLDs and FPGAs. The Altera Classic family — of which the EP910 is a member — was among the first commercial products to combine macrocell-based logic with on-chip non-volatile (EPROM) configuration. Architecturally, an EPLD sits in the hierarchy: programmable logic -> EPLD -> Classic EPLD -> PLD -> digital IC. Unlike SRAM-based FPGAs, Classic EPLDs retain configuration when powered off and are erased with a UV eraser, enabling rapid design iteration during development. The EP910 also includes on-board logic test circuitry that allows AC specification verification during production test, a feature uncommon in later CPLD families. Key features of the EP910IDC-15 include a 15 ns pin-to-pin propagation delay (tPD), 66.6 MHz maximum flip-flop toggle frequency (fCNT), 24 macrocells arranged in two logic array blocks, and 10 dedicated input pins plus 24 I/O pins. The device supports programmable security-bit protection and is 100% generically tested in windowed packages. According to the Altera Classic Device Family datasheet, the EP910 series was offered in commercial, industrial, and military temperature grades across DIP, PLCC, JLCC, PGA, and SOIC packages. The EP910 architecture uses a sum-of-products AND/OR logic array feeding 24 macrocells, each with a configurable flip-flop. Logic is implemented by programming EPROM cells that drive the AND array; each macrocell can be configured as D, T, JK, or SR flip-flop, or as combinational output. The internal 5 V CMOS EPROM process yields predictable, glitch-free outputs with TTL-compatible input and output thresholds, making the EP910 easy to interface with legacy 5 V logic families such as 74LS, 74HC, and 74F. Typical applications include 5 V TTL bus decoding, address-mapping glue logic for microprocessor systems, state-machine controllers for industrial equipment, replacement of multiple 74LS/74F PAL/GAL devices, and prototyping logic that will later be migrated to a non-erasable (one-time-programmable) pin-compatible EP910 variant. Designers also used the EP910 in telecom interface cards and military/aerospace systems where windowed ceramic packages were preferred for radiation tolerance and field reprogrammability. When designing with the EP910IDC-15, note that the ceramic DIP package has higher thermal mass than plastic but the same electrical footprint as the EP910PC (plastic DIP) and EP910DC variants. The ID suffix indicates the ceramic DIP form factor, and the C-15 suffix indicates commercial temperature range (0C to +70C) with 15 ns tPD. For new designs, consider modern 5 V-tolerant CPLDs in PLCC or TQFP packages with lower power and faster speeds; the EP910IDC-15 is primarily a legacy support and obsolescence-management part. This page synthesizes distributor pricing, drop-in alternatives from the Altera Classic family, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak
EP910IDI-15 - 24-Macrocell Classic EPLD 15ns | Intel / Altera
EP910IDI-15

EP910IDI-15 - 24-Macrocell Classic EPLD 15ns | Intel / Altera

The Intel / Altera (formerly Altera Corporation) EP910IDI-15 is a member of the Classic EPLD family, a 450-gate CMOS Complex Programmable Logic Device (CPLD) with 24 macrocells, 36 available I/O pins, and a pin-to-pin propagation delay of 15 ns, housed in a 40-pin Ceramic DIP (CDIP) windowed package. The "I" suffix denotes the industrial temperature grade and the "D" denotes the ceramic CerDIP package with a quartz window for in-circuit reprogrammability via UV erasure, a hallmark of the Classic EPLD family used in development, prototyping, and long-life-cycle industrial systems. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that sits in the programmable-logic hierarchy between simple PAL/GAL devices and high-density FPGAs. The Classic EPLD family, introduced in the late 1980s and still in production via Rochester Electronics for legacy sustainment, is built on a CMOS EPROM-cell architecture and uses the MAX+PLUS II development environment for design entry, fitting, and programming. The EP910 sits in the lower-density end of the Classic family, intended for glue-logic, address decoding, state-machine, and bus-interface tasks that require deterministic 15-ns timing rather than the higher gate counts of FPGAs. Key features include 24 individually programmable macrocells, each configurable as D, T, JK, or SR flip-flop or for combinatorial operation; 36 user I/O pins on the 40-pin CerDIP; a 15 ns pin-to-pin logic delay supporting counter frequencies up to approximately 66.6 MHz; and on-board logic-test circuitry that allows AC specification verification during production flow. The device is programmed using the Altera Logic Programmer card and the MAX+PLUS II software suite. All Classic EPLD members are pin-, function-, and programming-file compatible across speed grades and package variants, simplifying design migration. Typical applications include address decoding and glue logic in legacy 5V microprocessor systems, bus-interface adapters for ISA/VME/Motorola bus architectures, replacement of multiple discrete PAL/GAL devices, industrial control state machines, and military/aerospace systems requiring ceramic-packaged, windowed reprogrammable logic for field updates. The CDIP-40 ceramic package with UV window supports field erasure and reprogramming, which is critical for long-life-cycle defense and aerospace sustainment programs. When designing with the EP910IDI-15, note that this part operates from a single 5V supply and is fully static - there is no minimum clock frequency. Designers migrating from plastic DIP or PLCC EP910 variants (EP910PC-25, EP910LC-15, etc.) can drop in the same pinout but should account for the ceramic package's thermal characteristics if used in sealed or high-temperature environments.

RFQ Kontak
EP910ILC-12 - 24-Macrocell 12ns Classic EPLD | Intel / Altera
EP910ILC-12

EP910ILC-12 - 24-Macrocell 12ns Classic EPLD | Intel / Altera

The Intel / Altera EP910ILC-12 is a 24-macrocell Classic EPLD (Erasable Programmable Logic Device) from the Altera EP910 family, housed in a 28-pin PLCC (J-Lead) package with a 12 ns maximum propagation delay. It operates from a single 5 V supply (4.75 V to 5.25 V) and integrates 24 macrocells with 16 dedicated feedback paths to support combinational and registered logic up to approximately 450 usable gates. A Classic EPLD (Erasable Programmable Logic Device) is an early-generation programmable logic device using UV-erasable CMOS architecture. EPLDs sit in the programmable logic hierarchy above discrete SSI/MSI gates but below modern CPLDs and FPGAs in density. They belong to the broader category of programmable logic ICs, sitting between PALs (Programmable Array Logic) and contemporary CPLD/FPGA devices. Each macrocell contains a programmable AND/OR array and a configurable flip-flop, allowing the chip to replace multiple discrete 74-series logic ICs on a board. Key features include a 12 ns pin-to-pin propagation delay (tPD), 24 macrocells with 16 dedicated feedback paths, a 5 V ±5% supply range, and a JEDEC-standard 28-pin PLCC J-lead surface-mount package. The device is non-volatile - the logic configuration is stored in UV-erasable EPROM cells, providing instant-on behavior at power-up with no external boot memory required. The EP910 family is one of the longest-running Altera Classic EPLD families and is widely recognized for deterministic timing. The EP910ILC-12 uses a CMOS EPROM-cell AND/OR plane feeding 24 output macrocells, each with a configurable flip-flop, output enable, and product-term steering. Programming is performed via a standard Altera programming algorithm using a master/slave serial or parallel mode. Because the configuration is non-volatile, there is no boot sequence, JTAG configuration, or bitstream loading - the part begins executing its logic immediately after VCC is stable. Typical applications include glue-logic replacement in legacy 5 V systems, address decoding and bus-interface logic, state machines for industrial control boards, and prototyping replacements for discrete 74LS/74HC logic. The 12 ns tPD suits bus cycle times down to roughly 33 MHz, making it usable as a peripheral decoder in 8-bit and 16-bit microcontroller or 80x86 designs. When designing with this device, note that the 'I' suffix indicates the industrial temperature grade (-40 °C to +85 °C) and the 'C' suffix indicates the PLCC J-Lead package. Programming requires a UV windowed ceramic device variant (not provided in the PLCC J-lead 'C' suffix used here) or a one-time-programmed plastic package. Verify programming toolchain and software version compatibility with the specific lot date code. This page synthesizes distributor pricing, a drop-in replacement shortlist, and practical design notes not found in any single manufacturer datasheet, optimized for engineers sourcing legacy Classic EPLDs.

RFQ Kontak
EP910ILC-15 - 24 Macrocells, 66.6MHz CPLD | Altera Classic Family
EP910ILC-15

EP910ILC-15 - 24 Macrocells, 66.6MHz CPLD | Altera Classic Family

The Altera (Intel) EP910ILC-15 is a member of the Classic EPLD (Erasable Programmable Logic Device) family, providing 450 gates and 24 macrocells in a 44-pin PLCC package with a 15ns propagation delay. It operates from a single 5V supply and is rated for industrial temperature ranges, supporting through-hole surface-mount assembly. The EP910ILC-15 is fabricated using EPROM (UV-erasable) technology, enabling in-system prototyping with subsequent erasure and reprogramming cycles. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that combines the architecture flexibility of a PLD with the density of a small FPGA. In the system-on-chip hierarchy, a CPLD sits between discrete 74-series logic gates and an FPGA, offering deterministic timing, instant-on behavior, and pin-to-pin compatibility across logic density variants. The EP910 family belongs to the legacy Classic EPLD line that pre-dates the modern MAX series and is now maintained by Rochester Electronics as a long-life product. Key features of the EP910ILC-15 include 24 macrocells, 36 user I/O pins, 15 ns pin-to-pin propagation delay (tPD), a maximum internal operating frequency of approximately 83.33 MHz, and zero standby power. The device integrates an on-chip programmable interconnect, a JTAG-compatible test interface for in-system verification, and supports 5V CMOS or TTL input/output levels. The EPROM cell technology provides non-volatile configuration that retains state through power cycles without an external boot PROM. Architecture-wise, the EP910 family is built on a CMOS EPROM process with a sum-of-products logic structure feeding into a fixed OR array. Each macrocell contains a programmable flip-flop, output enable, and feedback path. The device supports logic synthesis through the MAX+PLUS II development environment (legacy tool flow), and parts can be re-programmed by exposing the package window to UV light for approximately 20 minutes followed by re-loading of the JEDEC fuse map. Typical applications of the EP910ILC-15 include glue-logic replacement for 74LS/74HC discrete gates, address decoding in legacy 8-bit and 16-bit microprocessor systems, bus interfacing between asynchronous peripherals and main processors, state-machine control of electromechanical subsystems, and prototyping platforms for verification of synchronous logic prior to ASIC tape-out. When designing with this part, remember that the PLCC-44 package requires a through-hole socket or careful reflow profile, and that the 15ns grade targets 66.6MHz system clocks rather than high-speed DSP pipelines. For new designs, verify whether the contemporary MAX V or MAX 10 CPLD families can deliver equivalent logic density at lower standby current. This page synthesizes Rochester Electronics authorized stocking information, Altera datasheet parametric excerpts, and practical drop-in alternatives not found in the original manufacturer datasheet - enabling faster procurement decisions for long-life-cycle industrial programs.

RFQ Kontak
EP910ILC-15N - 450 Gate 24-Macrocell Classic CPLD, 15ns, 5V, 44-PLCC | Altera
EP910ILC-15N

EP910ILC-15N - 450 Gate 24-Macrocell Classic CPLD, 15ns, 5V, 44-PLCC | Altera

The Altera EP910ILC-15N is a 450-gate, 24-macrocell Classic-family CMOS Complex Programmable Logic Device (CPLD) housed in a 44-pin Plastic Leaded Chip Carrier (PLCC) package. Operating from a single 5 V supply with 15 ns maximum pin-to-pin propagation delay, it delivers up to 66.6 MHz system clock performance in a through-hole-compatible, surface-mountable J-lead package. A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device that sits between simple SPLDs/GALs and higher-density FPGAs in the programmable logic hierarchy. CPLDs use a classic AND/OR plane architecture with a deterministic interconnect, EEPROM or EPROM configuration memory, and predictable timing that is independent of routing path. They are typically chosen over FPGAs when designs require fast input-to-output response, simple glue-logic integration, power-on instant-on behaviour without an external boot PROM, and I/O-rich, low-density logic capacity. The Classic family from Altera was an early-generation architecture that combined low static power with simple development tools such as the MAX+PLUS II environment. Key features of the EP910ILC-15N include 24 macrocells partitioned into logic blocks, 36 user I/O pins, 16 dedicated input pins, JTAG-compliant IEEE 1149.1 boundary-scan test support, and programmable output slew-rate control. The 15 ns speed grade enables combinational logic at moderate clock rates suitable for bus-interface, address-decoding, and peripheral-control tasks. Internally, the device uses a sum-of-products architecture with each macrocell containing a flip-flop and programmable output polarity. The 5 V CMOS I/O structure is TTL-compatible on inputs and capable of sinking 12 mA per output, allowing direct interface with 74-series logic, microprocessors, and SRAM without external buffers. The PLCC-44 package offers socketability for prototyping and field upgrades. Typical applications include legacy ISA/PCI bus interface logic, address decoding and glue logic for 8051/Microprocessor systems, state-machine controllers, and peripheral bus arbiter replacement. The instant-on non-volatile configuration makes the EP910ILC-15N particularly attractive in industrial-control and military-aerospace designs where boot-time predictability is essential. When designing with this part, observe the 5 V VCC tolerance and provide adequate decoupling (0.1 uF per supply pin plus a bulk 10 uF tantalum). For high-speed designs, respect the 15 ns tPD timing budget and use the JTAG port for in-system programming. This page synthesises distributor pricing from Rochester Electronics and other sources, drop-in alternative MPNs, and practical design notes not consolidated in the original manufacturer datasheet.

RFQ Kontak
EP910ILC-25 - Classic EPLD, 24 Macrocells, 25ns | Intel (Altera)
EP910ILC-25

EP910ILC-25 - Classic EPLD, 24 Macrocells, 25ns | Intel (Altera)

The Intel (formerly Altera) EP910ILC-25 is a classic Erasable Programmable Logic Device (EPLD) from the EP910 family, offering 24 macrocells, 36 user I/O pins, and a 25 ns propagation delay in a 44-pin JLCC windowed ceramic package suitable for engineering development and reprogrammable prototyping. An EPLD (Erasable Programmable Logic Device) is a type of programmable logic that combines the non-volatility and re-programmability of EPROM technology with the combinatorial and registered logic density needed to replace multiple discrete TTL/CMOS glue-logic devices. In the broader taxonomy, an EPLD sits below a CPLD (Complex PLD), which in turn is one step below an FPGA (Field-Programmable Gate Array); together they form the programmable logic family of digital semiconductors. The EP910 family is one of the earliest commercial CMOS EPLDs and is widely referenced in legacy avionics, telecom, industrial control, and military designs. Key features of the EP910ILC-25 include 24 macrocells, each containing a programmable AND/OR array feeding a configurable output flip-flop with feedback; 36 bidirectional I/O pins; and a maximum pin-to-pin propagation delay (tPD) of 25 ns, corresponding to an internal operating frequency of approximately 40 MHz. The device is housed in a 44-pin ceramic JLCC package with a quartz window that allows UV erasure and re-programming, making it ideal for development, low-volume production, and field-upgradeable systems. Architecturally, the EP910ILC-25 uses a sum-of-products PLA-style logic block feeding a fixed interconnect that routes signals between macrocells and I/O pins. Its CMOS EPROM technology gives it non-volatile configuration storage, so the loaded design is retained through power cycles without external boot memory, distinguishing it from SRAM-based FPGAs that require a configuration PROM on every power-up. Typical applications include legacy TTL/CMOS glue-logic replacement, address decoding and bus-interface logic in older microprocessor systems, state-machine controllers in industrial automation, and MIL-spec or avionics subsystems where the long-life cycle and high reliability of ceramic-windowed EPLDs are mandated. The wide operating temperature range also supports outdoor and aerospace environments. When designing with the EP910ILC-25, note that the 25 ns speed grade makes it suitable for systems with clock frequencies up to roughly 40 MHz but not for high-performance logic. Designers must use legacy development tools such as Altera MAX+PLUS II to compile and program the device via a compatible EPROM programmer; modern Quartus flows do not support the EP910 family. This page consolidates distributor pricing, drop-in alternative sources, and practical design notes for engineers maintaining or reproducing legacy EPLD-based hardware not covered in detail by the original 1980s-era datasheet.

RFQ Kontak