Mga Produkto (46,000+)

LM324DTBG - Quad 3-32V Op Amp | onsemi | TSSOP-14
LM324DTBG

LM324DTBG - Quad 3-32V Op Amp | onsemi | TSSOP-14

onsemi LM324DTBG is a low-cost, general-purpose quad operational amplifier with four true differential-input amplifiers in a 14-pin TSSOP package. The device operates from 3 V to 32 V, delivers a gain-bandwidth product of 1 MHz, and provides a slew rate of 0.6 V/µs. Its input offset voltage is specified at 5 mV, making it suitable for general instrumentation, buffering, and signal-conditioning circuits that do not require rail-to-rail precision. A quad operational amplifier combines four independent amplifier sections in one package. An operational amplifier is a voltage-feedback amplifier whose differential input is amplified by a high open-loop gain. The LM324 belongs to the broader hierarchy of analog signal-chain ICs, amplifier ICs, and general-purpose operational amplifiers. Four sections in one package reduce board area and can simplify designs requiring several low-frequency signal stages. The LM324DTBG provides four amplifier circuits, a 1 MHz gain-bandwidth product, and a 0.6 V/µs slew rate. These characteristics suit audio-frequency control loops, sensor conditioning, low-frequency active filters, and general-purpose voltage amplification. The 3 V to 32 V supply range also supports single-supply operation from conventional 5 V and 24 V industrial rails, subject to the device's detailed operating limits. The LM324 series uses true differential inputs, which is important when each amplifier receives two independently changing input voltages. A 5 mV input offset voltage characterizes the practical dc error around the signal path. The 1 MHz gain-bandwidth product limits the frequency range over which closed-loop gain can remain stable, while the 0.6 V/µs slew rate governs large-signal response. These are general-purpose figures rather than high-speed or precision-amplifier ratings. Typical applications include four-channel sensor buffering, industrial control interfaces, low-frequency active filters, audio preamplifier stages, and general instrumentation. The same quad package can also implement four independent amplifier functions, such as comparator-style signal conditioning, differential-to-single-ended conversion, or distributed gain stages. Because the device is not specified as a rail-to-rail amplifier, input and output common-mode limits must be respected in each design. For stable operation, follow the manufacturer datasheet when selecting input and output compensation components, grounding the unused amplifier sections, and setting gain through appropriate feedback networks. Keep sensitive input traces short, place bypass capacitance close to the supply pins, and verify common-mode and output-swing limits against the actual signal range. The TSSOP-14 footprint also requires adequate copper area and assembly-process clearance. This product page combines the LM324DTBG electrical identity, package information, sourcing structure, comparison criteria, and practical design guidance. It helps engineers evaluate whether this 3 V to 32 V, 1 MHz quad operational amplifier is appropriate for a new design or an existing 14-TSSOP circuit before beginning detailed circuit simulation and qualification.

RFQ Kontak
LM324DTBR2 - 3-32V Quad Op Amp | onsemi | TSSOP-14
LM324DTBR2

LM324DTBR2 - 3-32V Quad Op Amp | onsemi | TSSOP-14

onsemi LM324DTBR2 is a standard general-purpose quad operational amplifier with four amplifier circuits in a 14-pin TSSOP package. It operates from 3 V to 32 V, supports single-supply operation, and has a maximum input offset voltage of 5 mV. The LM324 series uses true differential inputs, making the device suitable for conventional amplifier, comparator, buffer, and low-frequency signal-conditioning circuits. An operational amplifier, commonly abbreviated op amp, is an analog semiconductor that amplifies the difference between two input voltages. The LM324 belongs to the broader operational amplifier -> voltage amplifier -> analog IC hierarchy. Its four independent channels make it efficient for designs requiring several analog functions on one board, while its wide supply range permits operation from low-voltage systems through industrial 24 V rails. The principal benefits are the integrated quad-channel configuration, a 3 V to 32 V operating range, and a 5 mV maximum input offset voltage. True differential inputs support input signals referenced to ground in single-supply systems. Its general-purpose architecture also makes it suitable for noninverting and inverting amplifiers, voltage followers, comparators, current-to-voltage conversion, and basic sensor interfaces when precision and speed requirements are modest. Internally, each channel provides differential input and single-ended output operation. The four channels share a common supply connection, while their input stages accept signals from ground to near the positive supply. Because the LM324 is intended primarily for low-cost, general-purpose designs, the application should not assume precision, high speed, rail-to-rail output, or low-noise operation unless those characteristics are separately confirmed for the selected device. Typical uses include four-channel sensor conditioning, industrial control interfaces, low-frequency audio signal paths, battery-powered monitoring equipment, and general analog measurement systems. In a single-supply circuit, designers should bias non-inverting inputs above ground to provide an operating common-mode range. The device is also useful in multiple independent gain stages where using four separate packages would increase board area and cost. A primary design consideration is to keep the input and feedback networks close to the amplifier pins and maintain adequate supply bypassing. The wide supply capability does not remove the need for stable reference and feedback components. Verify input offset, input bias current, output swing, gain-bandwidth, noise, and temperature limits against the manufacturer datasheet before using the LM324 for precision or safety-critical measurements. This page organizes the verified product identity, package information, sourcing questions, cross-reference alternatives, and practical circuit guidance into one engineering reference. It also distinguishes true same-package drop-in candidates from broader LM324 functional equivalents, helping designers avoid packages that require PCB changes.

RFQ Kontak
LM324DTBR2G - 4-Channel 32V Op Amp | onsemi | Industrial
LM324DTBR2G

LM324DTBR2G - 4-Channel 32V Op Amp | onsemi | Industrial

The onsemi LM324DTBR2G is a general-purpose, four-circuit operational amplifier with true differential inputs, a 3 V to 32 V supply-voltage range, 5 mV input-offset voltage, 1 MHz gain-bandwidth product, and 0.6 V/µs slew rate. The device is supplied in a 14-pin TSSOP package configured for tape-and-reel handling. An operational amplifier is an analog signal-conditioning IC that compares two input voltages and amplifies the difference between them. In its wider hierarchy, the operational amplifier belongs to the amplifier IC family, the analog-processing family, and ultimately the semiconductor category. The LM324 series is specifically positioned as a low-cost general-purpose quad amplifier for single-supply applications, while also supporting conventional split-supply operation. Four independent amplifier sections in one package make the LM324DTBR2G useful where a board needs multiple buffered channels without allocating four separate packages. Its 32 V maximum supply voltage provides useful headroom for industrial, control, and instrumentation circuits. The 1 MHz gain-bandwidth product supports general-purpose gain and buffering rather than demanding high-speed signal-chain applications. The 5 mV input-offset voltage is especially relevant when the amplified differential signal is small or when system calibration must account for amplifier input offset. The LM324 architecture provides true differential inputs and internally compensated operation. Internally compensated amplifiers avoid the need for an external dominant-pole capacitor when operating in a conventional closed-loop configuration. This simplifies board design, although the bandwidth, output drive, and slew rate remain those of a general-purpose device rather than a precision or high-speed amplifier. Typical uses include sensor-signal conditioning, current-to-voltage conversion, low-frequency active filtering, general instrumentation, audio preamplification, and industrial control interfaces. The four-channel organization can also reduce board area when several independent low-frequency analog signals must be amplified or buffered. Application-specific checks should confirm output swing, input common-mode range, load capability, noise, and stability. Designers should place input and output bypassing capacitors close to their associated supply pins, maintain short feedback paths, and verify that the selected feedback network remains stable at the operating gain and capacitive load. Because this is a quad device, unused amplifier sections should still be configured conservatively to avoid floating inputs and unnecessary channel activity. This product page consolidates the manufacturer-family characteristics, exact package information, practical application guidance, and a conservative drop-in comparison. It also distinguishes confirmed substitutions from package-only or functionally similar parts that should not be treated as true PCB drop-ins.

RFQ Kontak
LM324EDR2G - Quad Single-Supply Op Amp | onsemi | SOIC-14
LM324EDR2G

LM324EDR2G - Quad Single-Supply Op Amp | onsemi | SOIC-14

The onsemi LM324EDR2G is a four-circuit, single-supply operational amplifier in a 14-pin SOIC package. It provides four independent amplifier channels in one package, making it suitable for compact analog signal-conditioning designs that require more than one amplifier function on the same board. The device is identified as a standard general-purpose instrumentation and buffer amplifier. An operational amplifier, commonly called an op amp, is a high-gain differential amplifier used to amplify, buffer, compare, or otherwise condition analog signals. The LM324 belongs to the quad operational-amplifier family, combining four amplifiers in one package. This integration reduces board area and simplifies designs that need several similar analog channels, such as sensor interfaces, filters, control loops, and signal conditioning stages. The LM324EDR2G is intended for single-supply operation, which is useful in systems powered from a positive rail with a ground reference. Its four-circuit arrangement allows designers to assign separate amplifiers to independent signal paths while retaining a common package and supply arrangement. The 14-pin SOIC package is a standard surface-mount option for through-hole assembly and conventional PCB manufacturing. The LM324 is a general-purpose amplifier rather than a precision or high-speed signal-chain device. Its four channels make it especially useful in designs where several moderate-bandwidth, moderate-accuracy amplifier functions are required. Common uses include buffering sensor outputs, amplifying low-level control signals, implementing simple active filters, driving ADC input stages, and providing gain in feedback-control circuits. In practical designs, the amplifier supply pins must be connected according to the manufacturer pinout, and each channel must have appropriate input and feedback components. Input common-mode range, output swing, noise, bandwidth, input bias current, output-current capability, and absolute maximum ratings should be checked against the manufacturer datasheet before finalizing the circuit. Decoupling capacitors should be placed close to the supply pins to reduce supply noise and improve transient response. Because the LM324 is a quad amplifier in a 14-pin SOIC, PCB layouts should preserve adequate clearance around adjacent pins and route sensitive input traces away from noisy switching nodes. The same package footprint and four-channel organization can simplify product-family standardization when a design moves between related quad operational amplifiers. This product page combines the manufacturer-family identity, package information, application guidance, comparison criteria, and practical layout considerations to support faster component selection and PCB planning.

RFQ Kontak
LM324F-E2 - 4-Channel 3-32V Op Amp | ROHM Semiconductor
LM324F-E2

LM324F-E2 - 4-Channel 3-32V Op Amp | ROHM Semiconductor

ROHM Semiconductor LM324F-E2 is a four-circuit ground-sense operational amplifier in a 14-SOP package. The device is designed for general-purpose signal-conditioning applications using a 3 V to 32 V supply, with four independent amplifier channels and internally frequency-compensated operation. Its 14-pin package supports integration into industrial control, instrumentation, sensor interface, and analog signal-processing equipment. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs while providing feedback control of gain and bandwidth. The quad-amplifier configuration combines four independent channels in one package, reducing board area and simplifying multi-channel designs. The LM324F family belongs to the operational-amplifier hierarchy, which includes general-purpose amplifiers, instrumentation amplifiers, buffer amplifiers, and analog signal-conditioning ICs. The principal features of the LM324F-E2 include four amplifier circuits in one package, a 3 V to 32 V operating supply range, and a 14-SOP surface-mount package. Ground-sense operation makes the device applicable where signals are referenced to the system ground and the amplifier must tolerate operation from a single positive supply. The four-channel architecture is particularly useful when a board requires several similar low-frequency signal paths. Internally frequency compensation allows each amplifier to operate as a stable closed-loop gain stage without external compensation components. This characteristic supports standard inverting, non-inverting, summing, differential, buffer, and feedback-control circuits. Designers should still verify gain-bandwidth, output swing, input common-mode range, slew rate, and output-current behavior against the manufacturer datasheet for the selected operating voltage and load. Typical applications include four-channel sensor conditioning, industrial transducer interfaces, low-frequency control loops, instrumentation buffering, current-to-voltage conversion, and general analog measurement systems. The four channels may be used independently for different signal paths or combined in multi-stage circuits when signal polarity, biasing, and loading permit. The 3 V to 32 V supply range is useful for equipment operating from low-voltage electronics through higher industrial rails. The principal design consideration is ensuring that every input, output, and bias point remains inside the electrical limits for the intended supply. Decoupling capacitors should be placed close to the power pins, the unused amplifier in a quad package should be configured according to the manufacturer guidance, and PCB traces should minimize coupling between high-gain and sensitive input nodes. Confirm the exposed package details and pin assignments on the official LM324F datasheet before layout release. This product page combines the LM324F-E2 package and operating information with application guidance, replacement analysis, and design-focused comparisons. It is intended to help engineers identify the correct amplifier function, verify footprint compatibility, and plan PCB implementation without relying on a distributor summary alone.

RFQ Kontak
LM324F-GE2 - 3-32V Quad Ground-Sense Op Amp | ROHM
LM324F-GE2

LM324F-GE2 - 3-32V Quad Ground-Sense Op Amp | ROHM

ROHM Semiconductor LM324F-GE2 is a four-circuit, ground-sense operational amplifier designed for single-supply operation from 3 V to 32 V, or dual-supply operation from ±16 V to ±32 V. The device is packaged in a 14-pin SOP and is not recommended for new designs, making it primarily relevant to maintenance, repair, and continuation of existing qualified equipment. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to compare an input signal with a feedback network. The LM324F family is a ground-sense amplifier, placing emphasis on input and output voltage-range behavior near the lower supply rail. Four amplifiers are integrated into one package, reducing board area in designs requiring multiple general-purpose analog channels. Key characteristics include four amplifier circuits, a 3 V to 32 V single-supply range, a ±16 V to ±32 V dual-supply description, ground-sense input and output operation, and operation from a 14-pin SOP package. Low current consumption and a wide operating-voltage range support battery-powered, industrial-control, instrumentation, and signal-conditioning equipment where component count and supply flexibility are important. The LM324F architecture provides four general-purpose amplifier sections rather than a dedicated high-speed or precision design. Its supply tolerance allows operation from conventional low-voltage rails through substantially higher industrial bus voltages, subject to the absolute maximum ratings and application limits stated in the manufacturer datasheet. Ground-sense behavior should be reviewed carefully when the input source approaches ground or when the output must remain close to the lower rail. Typical uses include DC signal amplification, sensor conditioning, current-loop receivers, sample-and-hold circuits, comparators with external feedback, low-voltage audio stages, and general instrumentation. The four-amplifier arrangement is particularly useful when a design requires several channels with similar voltage ranges and supply requirements within one compact package. Designers should confirm the complete pin assignment, input-common-mode limits, output-swing limits, output-current capability, stability requirements, and bypass-capacitor recommendations in the manufacturer datasheet before layout release. Because the manufacturer marks LM324F as not recommended for new designs, production quantities and availability should be confirmed through the Request a Quote form before committing a new build. This product page consolidates lifecycle guidance, package details, sourcing instructions, replacement analysis, and application-oriented engineering guidance. It also distinguishes the original ground-sense LM324F device from alternatives that share the 14-pin SOP footprint but may differ in supply range, output-stage design, or qualification status.

RFQ Kontak
LM324FVJ-E2 - 4-Channel 3-32V Op Amp | ROHM
LM324FVJ-E2

LM324FVJ-E2 - 4-Channel 3-32V Op Amp | ROHM

ROHM Semiconductor LM324FVJ-E2 is a four-circuit, general-purpose operational amplifier designed for ground-sense signal conditioning in a 14-pin TSSOP-BJ package. The device operates from a 3 V to 32 V supply according to the Mouser product listing. Its four internal amplifiers support applications that require several independent analog channels in one package, while the ground-sense architecture is intended for measurements referenced close to the source signal. ROHM identifies the LM324FVJ as Not Recommended for New Designs, so it should be selected primarily for maintenance, continuity, or previously validated designs rather than new platform development. An operational amplifier is an analog integrated circuit that compares two input voltages and amplifies their difference. A ground-sense operational amplifier is designed to minimize errors caused by ground currents, especially when the input signal is close to the amplifier supply ground. Within the broader hierarchy, this component is a four-channel general-purpose operational amplifier, placing it among linear amplifiers and analog signal-conditioning ICs. Integrating four amplifiers into one package can reduce board area and simplify multi-channel instrumentation layouts. The principal documented features of the LM324FVJ-E2 are its four amplifier circuits, 3 V to 32 V operating-supply range, general-purpose classification, and 14-TSSOP-BJ surface-mount package. The ground-sense configuration is particularly relevant to sensor interfaces, transducer monitoring, and analog measurement systems where the signal source may sit near ground potential. Because the device is not recommended for new designs, engineers should verify current availability, environmental requirements, and any redesign requirements through the Request a Quote form before committing a new production release. Architecturally, the part combines four amplifiers in one multi-channel package. The wide 3 V to 32 V listed supply range allows operation from conventional low-voltage rails through substantially higher industrial-style rails, provided the circuit remains within every absolute-maximum and operating condition listed in the manufacturer documentation. Ground-sense behavior should be evaluated with the actual source impedance, return-current path, signal bandwidth, and bypass network because PCB grounding errors can dominate the useful accuracy of the measurement chain. Typical uses include four-channel sensor conditioning, low-level analog measurement, industrial control interfaces, instrumentation buffering, and signal amplification referenced to an analog ground. In these applications, the four channels can process related inputs or provide independent gain stages. The common 14-TSSOP-BJ package also allows routing and assembly practices compatible with other fine-pitch surface-mount operational amplifiers, provided designers verify the pinout and land pattern rather than relying only on package dimensions. For robust implementation, place input and supply bypass capacitors close to their associated pins, keep sensitive input traces short, and return amplifier ground currents through a path that avoids high-current load currents. The main engineering tradeoff is lifecycle suitability: the LM324FVJ-E2 offers a familiar ground-sense quad-amplifier format but is marked Not Recommended for New Designs, so a new design should weigh continuity against the use of a currently recommended amplifier family.

RFQ Kontak
LM324J - Quad 32 V 1 MHz Op Amp | Texas Instruments
LM324J

LM324J - Quad 32 V 1 MHz Op Amp | Texas Instruments

The Texas Instruments LM324J is a low-power, general-purpose, quad operational amplifier built for single-supply operation across a wide voltage range. Each of its four amplifiers is intended for 32 V maximum supply operation and 1 MHz gain-bandwidth performance, while the J package is a 14-pin ceramic dual in-line package identified by the verified DigiKey listing. The device combines four amplifiers in one package, making it useful when several independent analog stages must fit on a relatively compact board. An operational amplifier is an active analog component that uses high open-loop gain and negative feedback to amplify the difference between two input signals. In the broader electronics hierarchy, an op amp belongs to amplifier ICs and analog signal-chain devices. The LM324 family supports common general-purpose tasks including voltage buffering, summing, comparison, filtering, transducer conditioning, and gain stages, provided the designer observes its supply, input, output, and stability limits. Verified distributor information identifies the LM324J as a standard, general-purpose, four-circuit amplifier in a 14-CDIP package. The Mouser listing further identifies it as a military quad operational amplifier with 32 V operation and 1 MHz bandwidth. Those confirmed points establish the device’s most important selection criteria: four integrated channels, wide single-supply capability, roughly 1 MHz bandwidth, and a through-hole ceramic DIP footprint for higher-temperature or ruggedized legacy-style assemblies. Each amplifier shares the same positive supply, negative supply, and ground pins on the 14-pin package. The common architecture saves board area and reduces package count compared with four separate single op-amp ICs. It also makes rail planning and decoupling straightforward: the designer must ensure that all four channels remain within their electrical limits simultaneously and that power-supply bypass capacitors are placed close to the package supply pins. Typical uses include industrial control interfaces, sensor signal conditioning, low-frequency active filters, audio preamplification, instrumentation, power-supply feedback, and general mixed-signal embedded systems. The 1 MHz bandwidth favors low- to moderate-frequency signals rather than high-speed video, RF, or precision signal-path work. For those applications, verify exact gain-bandwidth, slew-rate, input-offset, output-current, and temperature limits against the official LM324 manufacturer documentation before production release. The principal design consideration is ensuring adequate output-voltage headroom and stability at the selected supply voltage, load, and gain. Because the verified excerpts do not publish exact capacitor values, common-mode limits, output-current ratings, or full pin names, those details remain deliberately unstated rather than guessed. This page combines verified sourcing data, package information, application guidance, and a conservative interpretation of the LM324J’s general-purpose role. Its differentiation is practical rather than headline performance: one 14-CDIP package supplies four general-purpose amplifier channels, while the 32 V and 1 MHz figures cover common industrial and embedded signal-conditioning needs. For an existing 14-pin LM324-family footprint, engineers should still compare the exact suffix, grade, pinout, and operating-temperature limits before approving a substitute.

RFQ Kontak
LM324KAD - Quad Op-Amp, 1.2MHz, SOIC-14 | Texas Instruments
LM324KAD

LM324KAD - Quad Op-Amp, 1.2MHz, SOIC-14 | Texas Instruments

The Texas Instruments LM324KAD is a quadruple general-purpose operational amplifier with four independent, high-gain, frequency-compensated amplifiers in a single 14-pin SOIC package. It operates from a single supply of 3V to 32V (or dual supplies of ±1.5V to ±16V), delivers a gain bandwidth product of 1.2 MHz, a slew rate of 0.5 V/µs, and includes 2kV ESD protection on all pins. A general-purpose operational amplifier is a voltage amplifier with differential inputs and a single-ended output that, with external feedback networks, performs amplification, filtering, comparison, buffering, and mathematical operations. Op-amps sit at the foundation of the analog signal chain hierarchy: operational amplifier -> analog front end -> signal conditioning IC -> mixed-signal system. The LM324 family is the industry-reference quad op-amp, and the LM324KAD variant adds enhanced 2kV ESD robustness for assembly environments. Key differentiating features include common-mode input voltage range that extends to ground (negative rail), enabling direct sensing of signals near 0V in single-supply systems; low supply-current drain of typically 0.8 mA per amplifier that is essentially independent of supply voltage; wide supply voltage tolerance for use across 5V, 12V, 24V industrial rails and ±15V analog rails; and four matched amplifiers sharing one bias network for reduced board space and matched thermal drift. The internal architecture uses high-gain, internally frequency-compensated stages, so no external compensation capacitor is required at unity gain. The differential input stage with PNP input transistors allows inputs to swing to ground, a defining trait of the LM324 topology. Output stages source and sink current with the class-ab biasing characteristic of the family. Typical applications include transducer amplifiers with ground-referenced sensors, DC gain blocks, active filters, comparators with hysteresis, summing and difference amplifiers, oscillator and multivibrator circuits, and general industrial instrumentation operating from single-ended 24V rails. A key design consideration: the LM324 output cannot pull fully to the positive rail and its sink capability at low output voltages is limited, so a pulldown resistor or load-to-ground reference is needed for outputs near 0V. Margin of 1.5V to the positive supply is required for linear output swing. This page adds information beyond the datasheet: verified distributor pricing context, drop-in alternative comparison (LM324AD, TS974IDT, MC3403DR, TL074), pinout table, practical design notes, and application-level selection guidance.

RFQ Kontak
LM324KADR - Quad 30V 1.2MHz Op Amp | Texas Instruments
LM324KADR

LM324KADR - Quad 30V 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM324KADR is a quad, general-purpose operational amplifier rated for a 30 V maximum supply, 1.2 MHz gain-bandwidth performance, and 3 mV input offset voltage. The device contains four independent, internally frequency-compensated amplifiers and is available in a 14-pin SOIC (D) package. Its improved ESD withstand rating is 2 kV, making it suitable for industrial control, instrumentation, signal conditioning, and low-cost general-purpose analog systems. An operational amplifier is a high-gain differential amplifier whose external feedback network determines its behavior. In the signal-chain hierarchy, the LM324KADR belongs to the operational-amplifier family within amplifier ICs and analog signal-chain devices. Unlike a single-amplifier package, this quad device integrates four independent amplifiers, allowing one component to support multiple analog channels while reducing package count and board area. Key features include four independent amplifiers, operation from a single supply or split supplies, a 1.2 MHz gain-bandwidth product, and a 3 mV input offset voltage. The 14-pin SOIC package also provides improved 2 kV ESD protection. These characteristics make the LM324KADR appropriate for low-frequency control loops, sensor amplification, buffering, and general-purpose signal processing where a broad supply-voltage range and economical quad integration are more important than precision or high-speed performance. The amplifiers are internally frequency compensated, which simplifies closed-loop design when stable operation is required. The 30 V maximum supply supports higher-voltage industrial interfaces than many low-voltage rail-to-rail amplifier families. Split-supply operation is also possible when the difference between the supplies remains within the device's permitted range. Its 1.2 MHz bandwidth is adequate for audio-band and general control applications but is not intended for high-speed instrumentation or RF signal paths. Typical uses include 4–20 mA current-loop receivers, industrial sensor interfaces, active low-pass filters, audio preamplifier stages, relay and motor-control loops, and general instrumentation. Using four amplifiers in one SOIC package simplifies multi-channel designs, although each amplifier has an independent signal path and shares the common supply and ground pins. PCB design should keep sensitive input and feedback traces short, place input bypassing close to the supply pins, and maintain a stable ground reference around the device. Do not substitute a rail-to-rail amplifier without checking input common-mode range, output swing, offset voltage, bandwidth, stability, and maximum supply voltage; those electrical differences can change the behavior of an existing LM324-based circuit.

RFQ Kontak
LM324KADRG4 - Quad 32V Op Amp with 2kV ESD | Texas Instruments
LM324KADRG4

LM324KADRG4 - Quad 32V Op Amp with 2kV ESD | Texas Instruments

The Texas Instruments LM324KADRG4 is a quadruple general-purpose operational amplifier in a 14-pin SOIC package, with four independent, frequency-compensated amplifiers that can operate from a single supply or split supplies. Its 3 V to 32 V operating range, typical 0.8 mA supply-current drain, and common-mode input range that includes ground make it suitable for cost-sensitive industrial and consumer signal-conditioning circuits. The LM324 family combines a high-gain differential input stage with single-ended output stages designed for straightforward single-supply operation. According to the Texas Instruments LMx24, LMx24x, LMx24xx, LM2902, LM2902x, LM2902xx and LM2902xxx datasheet, operation from split supplies is also possible when the total supply difference is 3 V to 32 V. This flexibility supports legacy industrial control, sensor conditioning, audio preamplification, and low-frequency filter designs. Key characteristics include four amplifiers in one package, a 3 V to 32 V supply range, low quiescent current of approximately 0.8 mA typical, and input common-mode voltage that includes ground. The LM324KADRG4 variant also carries 2 kV ESD protection according to its Texas Instruments product listing. The 14-pin SOIC footprint allows direct substitution with compatible LM324-family devices where electrical and temperature requirements are equivalent. The internal architecture favors general-purpose precision over high-speed or low-noise performance. Each channel is internally frequency compensated, so no external compensation network is required for unity-gain voltage-follower or non-inverting amplifier configurations. Input bias and offset currents remain part of the error budget when the amplifier operates with high-impedance sensors. Typical uses include four-channel sensor interfaces, low-frequency active filters, buffered ADC inputs, audio preamplifier stages, and general DC signal conditioning. Because all four channels share one package, ground-return and supply-bypass placement directly affect every amplifier and should follow the pinout and layout guidance in the manufacturer datasheet. For new single-rail designs, first verify output swing, input common-mode limits, output-current capability, and noise at the intended signal bandwidth. The LM324 remains effective where its supply range and low quiescent current outweigh the lower noise, wider bandwidth, and faster slew rate available from modern precision operational amplifiers. This page also organizes practical substitution options, application guidance, and design checks that are not presented together on a standard distributor listing.

RFQ Kontak
LM324KAN - 14-PDIP Quad Operational Amplifier | Texas Instruments
LM324KAN

LM324KAN - 14-PDIP Quad Operational Amplifier | Texas Instruments

The Texas Instruments LM324KAN is a four-circuit general-purpose operational amplifier in a 14-pin PDIP package, designed for low-power operation from a single power supply across a wide voltage range. The device provides four independent amplifier sections in one package, making it suitable for general-purpose signal conditioning, buffering, voltage amplification, and feedback-control circuits. The LM324KAN is identified as the military-temperature-grade ordering option within the LM324 family. An operational amplifier is an active analog device that amplifies the difference between its two inputs. The LM324 family belongs to the broader hierarchy of operational amplifiers, analog amplifiers, linear integrated circuits, and signal-chain semiconductors. Its single-supply capability allows operation from one positive rail and ground, although the complete electrical limits and common-mode behavior should be confirmed in the manufacturer datasheet before fixing system voltages. The primary feature of the LM324KAN is its integration of four general-purpose amplifier channels into one 14-pin PDIP. This reduces component count and board area compared with four single-amplifier packages. The through-hole PDIP format also suits educational equipment, industrial control prototypes, audio projects, legacy instruments, and maintenance applications where socketed or hand-soldered installation is common. Each amplifier section includes differential input and output connections arranged in a standard quad-op-amp layout. Pin 11 supplies the positive rail, pin 4 connects to the negative rail, and pins 1, 7, 8, and 14 provide the four outputs. Input pins 2 and 3, 5 and 6, 9 and 10, and 12 and 13 form the four differential input pairs. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks or socket connections. Typical uses include audio preamplification, sensor-signal conditioning, low-frequency filtering, active feedback, sample-and-hold support, and general instrumentation. Because the LM324KAN is a general-purpose amplifier rather than a precision or high-speed device, its noise, input-bias-current, slew-rate, output-current, and input-offset-voltage characteristics should be checked against the signal amplitude, source impedance, bandwidth, and required accuracy of the design. When designing around this device, check the maximum supply voltage and input common-mode range at the selected operating voltage. Decoupling capacitors should be placed close to the supply pins, and unused amplifier sections should be configured according to the manufacturer recommendations instead of being left floating. The DIP footprint also requires adequate spacing for through-hole insertion and soldering access. This page combines device identification, pin-level guidance, application analysis, drop-in alternatives, and practical design notes to support schematic capture, PCB layout, sourcing, and legacy-product maintenance for the LM324KAN.

RFQ Kontak
LM324KANSR - 1.2MHz Quad Op Amp | Texas Instruments
LM324KANSR

LM324KANSR - 1.2MHz Quad Op Amp | Texas Instruments

The Texas Instruments LM324KANSR is a four-circuit general-purpose operational amplifier with a 1.2 MHz gain-bandwidth product, supplied in a 14-pin small-outline integrated-circuit package. The device contains four independent, internally frequency-compensated amplifiers designed for general-purpose signal conditioning, control, and analog signal-processing applications. An operational amplifier, commonly abbreviated op amp, is a high-gain differential amplifier. Within the broader semiconductor hierarchy, an op amp belongs to the linear amplifier family, which sits within amplifier ICs and analog signal-processing devices. LM324-type amplifiers are valued for straightforward operation from single or split supplies, broad input-voltage flexibility, and low cost. The LM324KANSR is specifically identified as a 14-SO device. The four-amplifier configuration allows one package to serve several independent signal paths. Its 1.2 MHz gain-bandwidth product supports general-purpose feedback networks, instrumentation-style buffering, comparators with suitable hysteresis, differential summing circuits, and low-frequency active-filter stages. Because the amplifiers are frequency compensated, many common closed-loop configurations do not require external compensation components. Each circuit operates independently, allowing four unrelated signals to be processed simultaneously while sharing one package and supply connection. The 14-pin arrangement provides four amplifier sections, supply pins, and input or output connections for every channel. Its standard general-purpose classification supports broad industrial, instrumentation, control, audio, and interface applications where moderate bandwidth and precision are sufficient. Typical uses include sensor-signal conditioning, low-level signal amplification, active filtering, control-loop support, transducer interfacing, and general analog conditioning. Because the four channels operate independently, a single device can implement a sensor amplifier, output buffer, active filter section, and auxiliary gain stage when the required accuracy and bandwidth meet the application requirements. When assigning PCB tracks, use the pin-description table in the Texas Instruments datasheet and preserve the pin order associated with the 14-SO outline. Decouple the supply pins with the capacitance and placement required by the datasheet, and verify input and output common-mode limits for every operating condition. Stable feedback-network values and proper grounding are important because the 1.2 MHz bandwidth limits high-frequency gain and stability margin. This page combines the exact LM324KANSR ordering information, package details, sourcing guidance, drop-in replacement analysis, and practical design guidance to support faster component selection, PCB implementation, and legacy-design maintenance.

RFQ Kontak
LM324KAPW - Quad 2 kV ESD Op Amp | Texas Instruments
LM324KAPW

LM324KAPW - Quad 2 kV ESD Op Amp | Texas Instruments

Texas Instruments LM324KAPW is a quad general-purpose operational amplifier with 2 kV ESD protection, four amplifier channels, and a 14-pin TSSOP package. The device is intended for single-supply operation and is identified in manufacturer-related listings as a standard general-purpose amplifier. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to compare two input voltages and drive an output according to their difference. The quad LM324 combines four amplifiers in one package, reducing component count and simplifying layout in audio, sensor, filtering, and control circuits. As a general-purpose amplifier, it belongs to the operational-amplifier hierarchy within integrated circuits and analog signal processing. The principal device-level features include four amplifier channels, a 14-pin TSSOP package, operation from a single positive supply, and 2 kV ESD protection. Searchable manufacturer product information identifies the LM324KAPW as a general-purpose amplifier, while comparison data lists a gain-bandwidth product of 1.2 MHz. The four-channel integration allows one package to support independent filtering, buffering, amplification, or feedback-control functions. The LM324 architecture is suited to low-cost, low-frequency analog designs where moderate bandwidth and straightforward external compensation are sufficient. Its quad organization can reduce board area compared with four single-amplifier packages. Designers should still account for input common-mode range, output swing, supply headroom, input bias current, and stability when selecting external feedback components for a specific topology. Typical applications include low-frequency audio signal conditioning, resistive sensor amplification, active filtering, DC error amplification, and general feedback control. The same package can also be used for multi-stage signal conditioning where four channels must operate independently. For instrumentation or precision measurement designs, verify the complete electrical limits and noise performance against the manufacturer datasheet before finalizing the gain and bandwidth budget. PCB implementation should preserve short feedback paths, provide an unobstructed ground return, and decouple the supply close to the IC. The TSSOP-14 lead pitch also makes the device practical for compact, high-density analog assemblies. Avoid long signal traces between input and output nodes because parasitic capacitance can alter feedback behavior or cause instability in high-gain configurations. This product record combines manufacturer-related product descriptions, package information, cross-reference findings, and practical engineering guidance. The comparison section distinguishes true pin-compatible options from alternatives that may require a footprint or pinout change, while the design notes emphasize supply bypassing, feedback layout, and stability checks that are important when replacing a quad amplifier in an existing design.

RFQ Kontak
LM324KAPWR - Quad 2 kV ESD Op Amp | Texas Instruments (Tape & Reel)
LM324KAPWR

LM324KAPWR - Quad 2 kV ESD Op Amp | Texas Instruments (Tape & Reel)

Texas Instruments LM324KAPWR is a quad general-purpose operational amplifier with 2 kV ESD protection, four amplifier channels, and a 14-pin TSSOP package. The device is intended for single-supply operation and is identified in manufacturer-related listings as a standard general-purpose amplifier. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to compare two input voltages and drive an output according to their difference. The quad LM324 combines four amplifiers in one package, reducing component count and simplifying layout in audio, sensor, filtering, and control circuits. As a general-purpose amplifier, it belongs to the operational-amplifier hierarchy within integrated circuits and analog signal processing. The principal device-level features include four amplifier channels, a 14-pin TSSOP package, operation from a single positive supply, and 2 kV ESD protection. Searchable manufacturer product information identifies the LM324KAPWR as a general-purpose amplifier, while comparison data lists a gain-bandwidth product of 1.2 MHz. The four-channel integration allows one package to support independent filtering, buffering, amplification, or feedback-control functions. The LM324 architecture is suited to low-cost, low-frequency analog designs where moderate bandwidth and straightforward external compensation are sufficient. Its quad organization can reduce board area compared with four single-amplifier packages. Designers should still account for input common-mode range, output swing, supply headroom, input bias current, and stability when selecting external feedback components for a specific topology. Typical applications include low-frequency audio signal conditioning, resistive sensor amplification, active filtering, DC error amplification, and general feedback control. The same package can also be used for multi-stage signal conditioning where four channels must operate independently. For instrumentation or precision measurement designs, verify the complete electrical limits and noise performance against the manufacturer datasheet before finalizing the gain and bandwidth budget. PCB implementation should preserve short feedback paths, provide an unobstructed ground return, and decouple the supply close to the IC. The TSSOP-14 lead pitch also makes the device practical for compact, high-density analog assemblies. Avoid long signal traces between input and output nodes because parasitic capacitance can alter feedback behavior or cause instability in high-gain configurations. This product record combines manufacturer-related product descriptions, package information, cross-reference findings, and practical engineering guidance. The comparison section distinguishes true pin-compatible options from alternatives that may require a footprint or pinout change, while the design notes emphasize supply bypassing, feedback layout, and stability checks that are important when replacing a quad amplifier in an existing design.

RFQ Kontak
LM324KAPWRG4 - Quad 14-TSSOP Op Amp | Texas Instruments
LM324KAPWRG4

LM324KAPWRG4 - Quad 14-TSSOP Op Amp | Texas Instruments

The Texas Instruments LM324KAPWRG4 is a low-power, general-purpose quadruple operational amplifier integrating four amplifiers in a 14-pin TSSOP package. It supports single-supply operation, offers a typical low-supply-current drain of 0.8 mA, and is designed for general-purpose applications that require one amplifier per signal channel. An operational amplifier is an analog signal-conditioning device that uses high open-loop gain to amplify differences between its input terminals. The LM324 family combines four operational amplifiers with supply drain that remains largely independent of supply voltage. Its common-mode input range includes ground, allowing the device to operate from a positive supply while processing signals whose lower excursion approaches the negative supply rail. The LM324KAPWRG4 is identified as a standard general-purpose amplifier with four circuits and 2 kV ESD protection. According to the LM324 manufacturer information, it supports wide supply ranges of up to 26 V for single-supply operation and up to plus or minus 13 V for dual supplies. Its common-mode input capability is especially useful for sensor interfaces, transducer amplifiers, audio paths, and control signals referenced to ground. The four-amplifier configuration reduces the number of packages needed when several independent low-frequency signals must be processed. Each amplifier can operate independently, allowing one LM324KAPWRG4 to implement functions such as two instrumentation-amplifier sections, four voltage followers, or a mixture of summing, buffering, and gain stages. Independent operation requires careful grounding and decoupling so that high-current output stages do not disturb sensitive channels sharing the package. Typical applications include low-cost sensor conditioning, audio preamplification, active filtering, current-to-voltage conversion, and general industrial control. The TSSOP-14 surface-mount package supports compact PCB layouts, but its small thermal dissipation area makes trace and copper-plan consideration important when driving capacitive loads or operating continuously near the supply limits. For layout, place the package power-decoupling capacitor close to the supply pins and connect each ground reference to a low-impedance ground plane. Avoid placing sensitive input traces beside output traces carrying fast transients. Check output-swing and common-mode limits at the actual supply voltage and load before committing the design. This product page combines package, application, and drop-in replacement guidance with practical PCB and signal-integrity considerations. It also distinguishes same-footprint LM324 variants so engineers can review orderable suffixes and functional differences before redesigning an existing 14-TSSOP layout.

RFQ Kontak
LM324KD - Quad 30V 1.2MHz Op Amp | Texas Instruments
LM324KD

LM324KD - Quad 30V 1.2MHz Op Amp | Texas Instruments

The Texas Instruments LM324KD is a quad general-purpose operational amplifier rated for supply voltages up to 30 V, with a gain-bandwidth product of 1.2 MHz and improved 2 kV ESD protection. The device contains four independent, frequency-compensated amplifiers in a 14-pin SOIC package measuring 0.154 inch, or 3.90 mm, wide. Its combination of single- or dual-supply operation, low input bias current, and broad supply range makes it suitable for general-purpose analog signal conditioning. An operational amplifier, or op amp, is a high-gain differential amplifier used within the wider voltage-amplifier and analog IC hierarchy. LM324-family devices are commonly used for buffering, voltage amplification, current-to-voltage conversion, filtering, comparators, and instrumentation interfaces. Unlike rail-to-rail precision amplifiers, the LM324 uses conventional bipolar input stages and includes internal compensation, allowing straightforward use without an external frequency-compensation network. The LM324KD provides four amplifiers in one package, reducing board area and simplifying designs that require multiple similar analog channels. Its verified supply capability covers 3 V to 32 V for single-supply operation and ±1.5 V to ±16 V for dual-supply operation. The listed per-channel output current capability is 60 mA, while the input bias current is listed as 20 nA. The 1.2 MHz gain-bandwidth product supports moderate-bandwidth closed-loop applications. Each channel is independent and can operate with common input ranges that include ground, making single-supply sensing of signals near 0 V practical. The LM324K family also incorporates improved 2 kV ESD protection, an important consideration for exposed sensor, interface, and control boards. The internal architecture prioritizes forgiving general-purpose operation rather than the low offset, low drift, and rail-to-rail performance expected from precision or modern energy-efficient amplifier families. Typical uses include low-frequency sensor amplifiers, buffered analog inputs, audio preamplification, loop-filter sections, motor and industrial control interfaces, and general instrumentation. The 14-pin SOIC package supports conventional surface-mount assembly, while the four-amplifier configuration can implement two differential channels, four single-ended channels, or a mixture of amplifiers and comparators. Designers should preserve adequate input and output common-mode range, account for the typical 0.5 uA supply current, and verify operation across the full industrial supply range. Decoupling close to the positive and ground pins is recommended, and signal routing should minimize parasitic capacitance around high-impedance input nodes. The published 24-page datasheet and manufacturer product page should be consulted for the complete electrical limits, pin configuration, and test conditions. This page combines verified manufacturer and distributor information, current pricing, package and pinout details, drop-in replacement evidence, and application-focused design guidance. It is intended to help engineers compare the LM324KD with other LM324-family choices while preserving PCB footprint, supply-voltage, and signal-chain compatibility.

RFQ Kontak
LM324KDR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM324KDR

LM324KDR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)

The Texas Instruments LM324KDR is a quad general-purpose operational amplifier rated for supply voltages up to 30 V, with a gain-bandwidth product of 1.2 MHz and improved 2 kV ESD protection. The device contains four independent, frequency-compensated amplifiers in a 14-pin SOIC package measuring 0.154 inch, or 3.90 mm, wide. Its combination of single- or dual-supply operation, low input bias current, and broad supply range makes it suitable for general-purpose analog signal conditioning. An operational amplifier, or op amp, is a high-gain differential amplifier used within the wider voltage-amplifier and analog IC hierarchy. LM324-family devices are commonly used for buffering, voltage amplification, current-to-voltage conversion, filtering, comparators, and instrumentation interfaces. Unlike rail-to-rail precision amplifiers, the LM324 uses conventional bipolar input stages and includes internal compensation, allowing straightforward use without an external frequency-compensation network. The LM324KDR provides four amplifiers in one package, reducing board area and simplifying designs that require multiple similar analog channels. Its verified supply capability covers 3 V to 32 V for single-supply operation and ±1.5 V to ±16 V for dual-supply operation. The listed per-channel output current capability is 60 mA, while the input bias current is listed as 20 nA. The 1.2 MHz gain-bandwidth product supports moderate-bandwidth closed-loop applications. Each channel is independent and can operate with common input ranges that include ground, making single-supply sensing of signals near 0 V practical. The LM324K family also incorporates improved 2 kV ESD protection, an important consideration for exposed sensor, interface, and control boards. The internal architecture prioritizes forgiving general-purpose operation rather than the low offset, low drift, and rail-to-rail performance expected from precision or modern energy-efficient amplifier families. Typical uses include low-frequency sensor amplifiers, buffered analog inputs, audio preamplification, loop-filter sections, motor and industrial control interfaces, and general instrumentation. The 14-pin SOIC package supports conventional surface-mount assembly, while the four-amplifier configuration can implement two differential channels, four single-ended channels, or a mixture of amplifiers and comparators. Designers should preserve adequate input and output common-mode range, account for the typical 0.5 uA supply current, and verify operation across the full industrial supply range. Decoupling close to the positive and ground pins is recommended, and signal routing should minimize parasitic capacitance around high-impedance input nodes. The published 24-page datasheet and manufacturer product page should be consulted for the complete electrical limits, pin configuration, and test conditions. This page combines verified manufacturer and distributor information, current pricing, package and pinout details, drop-in replacement evidence, and application-focused design guidance. It is intended to help engineers compare the LM324KDR with other LM324-family choices while preserving PCB footprint, supply-voltage, and signal-chain compatibility.

RFQ Kontak
LM324KN - Quad 14-PDIP General-Purpose Op Amp | Texas Instruments
LM324KN

LM324KN - Quad 14-PDIP General-Purpose Op Amp | Texas Instruments

Texas Instruments LM324KN is a four-circuit general-purpose operational amplifier in a 14-pin PDIP package. The device combines four independent, internally frequency-compensated amplifiers with an operating supply range extending to 36 V, a typical low supply-current drain of 0.8 mA, and input common-mode operation that includes ground. It is designed for single-supply or split-supply operation and includes 2 kV ESD protection. An operational amplifier is an analog signal-conditioning IC that uses feedback to control gain, amplify differential inputs, buffer sensors, and perform general-purpose analog calculations. The LM324 family belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its common-mode input range includes ground, making it useful in circuits powered from a positive rail and sensing signals near 0 V. The four independent channels can perform simultaneous amplification, filtering, buffering, or summing functions while sharing one package. Internal frequency compensation makes the LM324 suitable for general-purpose closed-loop amplifier designs without external compensation networks. Its low 0.8 mA typical supply-current drain helps reduce system power consumption, while the broad supply capability supports industrial and legacy equipment operating from multiple rail voltages. Common applications include sensor-signal conditioning, low-level current-to-voltage conversion, audio preamplification, active filtering, comparators with additional biasing, and general instrumentation. The 14-pin PDIP format also supports manual assembly and through-hole prototyping in laboratories, educational equipment, industrial control systems, and repair products. When designing an LM324KN circuit, verify input and output voltage limits against the selected operating rail, including output swing limitations when driving capacitive loads. Place input compensation or bias resistors close to the relevant amplifier pins, keep feedback loops short, and provide stable bypassing at the supply pins to limit noise and prevent oscillation. This product page combines the LM324KN package and feature information with practical analog-design guidance, application context, verified alternatives, and a parameter comparison for faster component selection.

RFQ Kontak
LM324KNSR - Quad 30-V 1.2-MHz Op Amp | Texas Instruments
LM324KNSR

LM324KNSR - Quad 30-V 1.2-MHz Op Amp | Texas Instruments

The Texas Instruments LM324KNSR is a quadruple general-purpose operational amplifier with four independent, high-gain, frequency-compensated amplifiers, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth performance, and improved 2 kV ESD protection in a 14-pin SOIC (NS) package. Each amplifier can operate from a single supply or split supply, making the device useful in general-purpose analog signal-processing circuits. An operational amplifier, or op amp, is a high-gain differential amplifier that compares two input voltages and drives its output to represent their difference. Within the broader semiconductor hierarchy, an op amp is an analog amplifier IC used for signal conditioning, buffering, amplification, filtering, feedback control, and voltage-level conversion. The LM324KNSR integrates four such amplifiers into one package, reducing board area compared with four separate single or dual amplifier packages. The principal device ratings include operation from a single or split supply, a 30 V maximum supply voltage, 1.2 MHz gain-bandwidth bandwidth, and 2 kV improved ESD protection. The manufacturer identifies LM324KNSR as a standard general-purpose amplifier with four circuits and a 14-pin SOP package. Its specified operating-temperature range is 0 to 70 °C, making it appropriate for commercial equipment where an extended industrial temperature rating is not required. The LM324K family is designed for broad compatibility with established LM324-type amplifier boards. Because the four amplifiers share a common package but operate independently, separate signal paths can be implemented within one device. The frequency-compensated architecture simplifies closed-loop use when the amplifier is configured as a standard inverting or non-inverting gain stage, although loop stability and bandwidth still depend on the external feedback network and load. Typical uses include audio preamplification, sensor signal conditioning, current-to-voltage conversion, active filtering, voltage comparison, and general instrumentation. The four-amplifier arrangement is especially useful when a design needs several channels of similar gain and bandwidth, such as multiple sensor inputs or a balanced differential stage followed by additional gain stages. PCB layout should keep input and feedback connections short and route them away from high-current switching nodes. Decoupling capacitors should be placed close to the power pins, while the unused amplifier in any unused channel must be configured according to the Texas Instruments LM324K datasheet rather than left floating. The 14-pin SOIC footprint simplifies replacement on compatible LM324NS-style boards. This product record combines manufacturer specifications, package and ordering information, drop-in candidate analysis, comparison parameters, and practical PCB guidance. It helps engineers evaluate the LM324KNSR for general-purpose analog designs and identify whether a same-footprint LM324-family device is appropriate when supply voltage, temperature grade, or sourcing requirements change.

RFQ Kontak
LM324KPWR - Quad 30V 1.2MHz Op Amp | Texas Instruments
LM324KPWR

LM324KPWR - Quad 30V 1.2MHz Op Amp | Texas Instruments

The Texas Instruments LM324KPWR is a four-circuit general-purpose operational amplifier with a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, and improved 2 kV ESD protection. The device is packaged in a 14-pin TSSOP, combining four amplifiers in a compact surface-mount footprint. Each channel supports the standard op-amp functions of voltage amplification, filtering, buffering, summing, and difference amplification. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to control an output voltage. The LM324 belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Its four channels share a positive supply, negative supply, and ground reference, making it useful where several independent low-frequency analog stages are required in the same board area. The principal features include four amplifiers per package, a 1.2 MHz gain-bandwidth product, operation from a single supply or dual supplies, a 30 V maximum total supply rating, and 2 kV ESD protection. These characteristics suit general-purpose signal conditioning rather than precision or high-speed instrumentation. The quad organization also reduces component count and simplifies routing when one board section contains four similar low-frequency channels. Each amplifier uses differential inputs, an output stage, bias compensation, and internal frequency compensation. The common design is intended for stable operation with feedback networks that define closed-loop gain. Because this is a general-purpose amplifier, input offset, input bias current, output-current capability, slew rate, and common-mode limits should be checked against the exact signal levels and load conditions before finalizing a design. Typical uses include sensor-signal conditioning, low-frequency active filters, audio preamplification, comparators with suitable feedback, DC summing and difference stages, and general buffer or gain stages. The 14-pin TSSOP is appropriate for compact industrial, instrumentation, consumer, and embedded-control equipment where four analog channels are preferable to separate single or dual amplifier packages. Layout and stability remain the primary implementation considerations. Keep input and feedback traces short, place compensation or bypass components close to their associated pins, and maintain a common ground reference across all four channels. Avoid long unprotected inputs and place external input clamps where exposed connectors can carry electrostatic discharge. Confirm the selected channel’s input and output swing against the intended supply rails. This page consolidates the exact package, electrical headline ratings, drop-in alternatives, comparison parameters, and practical design guidance for LM324KPWR. It helps engineers identify the correct TI orderable MPN and assess whether the quad general-purpose amplifier meets a circuit’s voltage, bandwidth, ESD, footprint, and sourcing requirements.

RFQ Kontak
LM324LVIDR - 4-Channel 5.5V Op Amp | Texas Instruments
LM324LVIDR

LM324LVIDR - 4-Channel 5.5V Op Amp | Texas Instruments

The Texas Instruments LM324LVIDR is a four-channel, general-purpose operational amplifier designed for low-voltage operation from 2.7 V to 5.5 V, with a gain-bandwidth product of 1 MHz and a typical input offset voltage of 3 mV. The device is packaged in a 14-pin SOIC (D) and supports operation from -40°C to 125°C. Four independent amplifiers in one package make it suitable for compact analog signal-conditioning, sensing, filtering, and buffering systems. An operational amplifier, or op amp, is a high-gain differential amplifier that compares two input voltages and drives its output to represent their difference. The LM324LV belongs to the broader operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its four channels can amplify sensor signals, buffer high-impedance sources, perform active filtering, or provide simple differential-to-single-ended conversion when configured with external resistors. The LM324LV family is optimized for supply voltages down to 2.7 V, making it more useful in low-voltage systems than standard LM324 devices intended for wider supply ranges. Its 1 MHz gain-bandwidth product supports general-purpose signal paths rather than high-speed video or precision instrumentation. The 3 mV input offset specification is important for dc applications because it influences the output error after gain is applied and can contribute to input-referred error near the lower end of the input range. Each channel provides practical flexibility for single-supply designs. Input and output behavior depends on the common-mode and output-swing limits, so the circuit must keep signals within the amplifier's supported operating region. The four amplifiers share a common supply voltage, but their input stages are independent, allowing different signals and gains to be processed in one package. Grounding, bypassing, and output-load conditions remain important for stable low-frequency operation. Typical uses include battery-powered sensor interfaces, industrial control signals, audio preamplifier stages, active low-pass filters, transducers, and low-voltage data-acquisition modules. The SOIC-14 package is also convenient for prototyping and conventional surface-mount assembly. Because all four channels are independent, unused amplifiers can be configured as buffers, followers, or signal conditioners rather than left unconnected. For reliable operation, place the supply bypass capacitor close to the positive and ground pins and keep feedback resistors close to the corresponding amplifier inputs. Check input common-mode range and output swing against the actual signal. When replacing a standard LM324, verify voltage range, offset, bandwidth, output-current capability, and stability because the LM324LV is optimized specifically for low-voltage operation. This page combines the LM324LVIDR electrical and package details with application guidance, validated replacement information, comparison parameters, and practical PCB design notes for engineers evaluating a 2.7 V to 5.5 V quad op amp.

RFQ Kontak
LM324LVIPWR - Quad 5.5V 1MHz Op Amp | Texas Instruments
LM324LVIPWR

LM324LVIPWR - Quad 5.5V 1MHz Op Amp | Texas Instruments

The Texas Instruments LM324LVIPWR is a quad, general-purpose operational amplifier rated for a 5.5 V maximum supply, operating from ±2.75 V to 5.5 V. Each of its four amplifiers provides 1 MHz of gain-bandwidth product and a 3 mV offset-voltage rating. The device is packaged in a 14-pin TSSOP (PW) and is specified across the -40°C to +125°C industrial temperature range. An operational amplifier, or op amp, is an analog integrated circuit that amplifies the difference between two input voltages. The LM324LV belongs to the broader hierarchy of operational amplifiers, analog amplifiers, and integrated circuits. Its quad configuration integrates four amplifiers in one package, reducing board area when a design requires several independent gain stages, buffers, comparators, or current-feedback loops. The LM324LV series is designed for low-voltage operation while retaining the familiar pin arrangement and general-purpose characteristics associated with industry-standard quad amplifiers. The 1 MHz gain-bandwidth product supports audio-frequency and general analog signal conditioning, while the 3 mV offset specification supports precision-enough closed-loop amplification when resistor matching and calibration are considered. The 5.5 V ceiling allows operation from regulated 3.3 V or 5 V rails common in industrial control, instrumentation, sensor-conditioning, and embedded systems. Because the IC contains four amplifiers, each channel has independent input, output, and power connections arranged according to the manufacturer pin-description table. Typical applications include voltage buffers, transimpedance stages, active filters, differential amplifiers, level shifting, and low-frequency audio paths. Decoupling capacitors near the supply pins help control impedance and prevent supply noise from appearing at the amplifier output. A key design consideration is that the gain-bandwidth product must be appropriate for the operating frequency. A closed-loop gain of 10 leaves approximately 100 kHz of bandwidth, so higher closed-loop gains reduce usable bandwidth. The offset specification alone does not determine total accuracy; input bias current, input common-mode range, output swing, resistor tolerance, and temperature drift also contribute to the final error budget. This page organizes the device specifications, package information, design guidance, and engineering selection criteria into a compact reference. It also highlights where additional datasheet details are required before a circuit is released for production.

RFQ Kontak
LM324M - Low-Power Quad Op Amp | Texas Instruments
LM324M

LM324M - Low-Power Quad Op Amp | Texas Instruments

The Texas Instruments LM324M is a low-power, general-purpose quad operational amplifier containing four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin SOIC package. The verified source identifies the device as a standard four-circuit amplifier designed for operation from a single power supply over a wide voltage range. Because exact electrical ratings were not included in the supplied source data, values such as supply voltage, gain-bandwidth product, input bias current, and output-current limits remain subject to confirmation in the manufacturer datasheet. An operational amplifier is an analog signal-processing IC that uses high open-loop gain to amplify the difference between two inputs. Negative feedback establishes a stable closed-loop gain and bandwidth. The LM324 family belongs to the broader quad-operational-amplifier hierarchy: operational amplifier, analog amplifier, linear amplifier, and integrated circuit. Its four internally compensated channels can amplify AC or DC signals when supported by suitable biasing, decoupling, feedback, and output-loading conditions. The principal feature of LM324M is integration. Four amplifiers in one 14-pin SOIC reduce package count and simplify common dual-rail or single-supply analog boards. Internal frequency compensation means each channel does not require a separate compensation network for ordinary closed-loop operation. The verified manufacturer result specifically describes LM324 as low-power and optimized for single-supply operation, while the distributor result classifies LM324M as a standard general-purpose instrumentation and buffer amplifier. The four channels are intended for independent signal-conditioning tasks. Typical functions include noninverting and inverting amplification, voltage buffering, active filtering, cross-coupled analog networks, and sensor-signal conditioning. Internal compensation supports unity-gain buffer use, but stability, output swing, input common-mode range, slew rate, noise, and usable bandwidth must be checked against the actual circuit. A low-power general-purpose amplifier may not be suitable when very wide bandwidth, very low offset, low noise, rail-to-rail input/output, or high capacitive-drive capability is required. A practical single-supply design must establish a suitable input common-mode voltage and output bias point. Bypass the power pin close to the IC, route traces to avoid feedback around unintended paths, and avoid excessive capacitive loading on an output. Because the provided search result does not include verified temperature, RoHS, REACH, or package-dimension details, those specifications should be taken from the official LM324 documentation before release to production. Typical uses include low-frequency sensor conditioning, buffered instrumentation, active filters, classroom electronics, industrial control blocks, and general analog signal chains. This page summarizes the verified product identity and package, provides practical design guidance, distinguishes confirmed facts from missing ratings, and directs buyers to the official product page for complete electrical and qualification data.

RFQ Kontak