Mga Produkto (46,000+)

LM324AN/PB - Quad 30V 1.2MHz Op Amp | Texas Instruments (Lead-Free (Pb-Free))
LM324AN/PB

LM324AN/PB - Quad 30V 1.2MHz Op Amp | Texas Instruments (Lead-Free (Pb-Free))

The Texas Instruments LM324AN/PB is a low-power, quad operational amplifier containing four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin PDIP package. The device operates from a single power supply, supports a maximum supply voltage of 30 V, and is specified for a gain-bandwidth product of 1.2 MHz with an input offset voltage rating of 3 mV. Its operating temperature range is 0°C to 70°C. An operational amplifier is an analog integrated circuit that amplifies the difference between its non-inverting and inverting inputs. The LM324AN/PB belongs to the general-purpose operational amplifier family within the broader voltage-amplifier and analog signal-conditioning hierarchy. Internally compensated gain stages allow the amplifier to provide stable closed-loop operation without an external compensation capacitor, while the differential input architecture supports common-mode operation from ground upward in many single-supply circuits. Each of the four amplifier sections has a differential input, an output, and internal bias compensation. The 3 mV input offset rating is suitable for general instrumentation, sensor interfaces, active filtering, and audio preamplification where the signal is not operating near the precision limits of a dedicated low-offset amplifier. The 1.2 MHz gain-bandwidth product provides adequate bandwidth for low-frequency control, buffering, and modest-frequency signal-processing applications. The LM324AN/PB is a classic single-supply-oriented device, but its wide supply capability also permits conventional dual-supply operation where the common-mode input range permits it. The four independent amplifiers can implement separate gain stages, comparators, filters, or buffer functions in one package. The through-hole PDIP construction is particularly useful for prototype boards, educational systems, industrial controllers, and repair assemblies where socketed or manually inserted parts are preferred over fine-pitch surface-mount packages. Typical uses include DC signal conditioning, bridge-amplifier interfaces, loop filtering, audio mixing stages, general feedback control, and low-cost sensor amplification. Because the LM324AN/PB is not a rail-to-rail input or output amplifier, the engineer should verify input common-mode range and output swing against the selected supply voltage. Decoupling capacitors are normally placed close to the supply pins to control impedance and prevent feedback from disturbing analog signal integrity. For new precision designs, compare the LM324AN/PB with rail-to-rail or low-offset alternatives before committing to the design. For established DIP-14 layouts and repair work, the LM324AN/PB remains useful because several LM324-family devices from different manufacturers are offered in the same 14-pin through-hole footprint. Pricing shown for this page is referenced as of October 29, 2026 and should be rechecked against current distributor inventory. This page consolidates manufacturer specifications, verified distributor listings, cross-reference options, pin-level implementation guidance, and application-specific design notes that help engineers evaluate the LM324AN/PB beyond a basic distributor catalogue entry.

RFQ Kontak
LM324ANE4 - Quad 14-PDIP Op Amp | Texas Instruments
LM324ANE4

LM324ANE4 - Quad 14-PDIP Op Amp | Texas Instruments

Texas Instruments LM324ANE4 is a low-power, quadruple operational amplifier designed for general-purpose analog signal conditioning from single or split power supplies. The device contains four amplifiers in one 14-PDIP package and is associated with a wide supply-voltage operating range. According to the Texas Instruments LM324 product page, the LM324 family is optimized for low-power operation, while the device description identifies it as a low-power quad operational amplifier for single-supply applications. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to compare and process voltages. The LM324 family belongs to the operational-amplifier hierarchy within analog and signal-chain ICs. Four amplifiers in one package can support buffer, amplifier, comparator, summing, difference, filtering, and level-conversion functions while reducing board area and external component count. The LM324ANE4 combines four amplifier channels with single-supply operation. The component documentation describes operation from split supplies with a total supply difference from 3 V to 32 V, and notes a typical low supply-current drain of 0.8 mA. Its input common-mode voltage range includes ground, allowing the amplifier to process input signals near the lower supply rail. This rail-to-near-ground input capability is particularly useful in systems powered from a single positive supply. Each internal amplifier includes the input and output functions needed for conventional closed-loop analog designs. Feedback components establish gain and filtering behavior, while the open-loop characteristics of the internal transistor stages determine signal amplification, common-mode behavior, and output-drive capability. Because all four channels share one package and supply pins, the device is especially practical when a board needs several similar signal-conditioning channels rather than unrelated mixed functions. Typical applications include low-frequency audio and control circuits, DC signal amplifiers, active filters, sensor-signal conditioning, and general industrial interface boards. The four-channel organization can simplify a design requiring multiple gain stages or parallel low-bandwidth analog channels. The 14-PDIP package also supports through-hole assembly and prototype-board layouts where a surface-mount package would be inconvenient. Designers should verify the exact input common-mode limits, output-swing limits, supply-current behavior, electrical characteristics, and operating-temperature grade in the manufacturer datasheet before finalizing signal headroom. Input and output stability also depends on the selected feedback network, source impedance, load, decoupling, and board layout. Place bypass capacitors close to the supply pins and keep sensitive input nodes away from high-current return paths. This product page combines manufacturer-product information, datasheet references, package and pinout details, application guidance, and same-footprint alternative analysis. It is designed to help engineers evaluate the LM324ANE4 alongside other Texas Instruments LM324 ordering codes while preserving the constraints of a 14-PDIP, four-channel general-purpose amplifier.

RFQ Kontak
LM324ANG - 4-Channel 3-32V Op Amp | onsemi | Through-Hole
LM324ANG

LM324ANG - 4-Channel 3-32V Op Amp | onsemi | Through-Hole

The onsemi LM324ANG is a low-cost, four-channel operational amplifier designed for general-purpose single-supply applications, with four true differential-input amplifiers in a 14-pin through-hole PDIP package. The device operates from 3 V to 32 V, supports a 1 MHz gain-bandwidth product, and has a specified input offset voltage of 3 mV. Its four-amplifier configuration reduces package count and provides a practical approach to multi-channel signal conditioning without requiring four separate single op-amp packages. An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. The LM324 series belongs to the quad operational-amplifier family within the broader linear amplifier and signal-conditioning hierarchy. Its differential input architecture is useful for comparing a sensor signal with a reference voltage, amplifying small signals in control systems, buffering high-impedance sources, and implementing basic active filters or summing circuits. The LM324ANG combines four amplifiers, single-supply operation from 3 V to 32 V, a 1 MHz gain-bandwidth product, and a 65 dB minimum common-mode rejection ratio. These characteristics make it suitable for industrial control, instrumentation, sensor interfaces, audio and communications support circuits, and general embedded-system analog conditioning. The input offset voltage of 3 mV is important in precision-sensitive applications and should be considered when defining acceptable error budgets. The device is intended for general-purpose, non-quadrature applications where economical integration and simple single-supply operation are more important than low-noise, high-speed, or rail-to-rail performance. Its four internal channels share the device power rails but provide independent differential inputs and outputs. Engineers should design feedback networks around the required closed-loop gain and check output swing, input common-mode range, output-current capability, and stability at the selected operating voltage. Typical circuit roles include amplifying a 0-5 V sensor signal, buffering a potentiometer, comparing a control signal with a reference, driving the input stage of a power circuit, and providing four independent amplifier channels in one package. The 14-pin PDIP package is suited to through-hole PCB assembly, educational prototypes, industrial control boards, and repair or modernization work where a pin-compatible replacement is needed. When laying out a board, place input, feedback, and decoupling connections close to the device, connect the power pins to a low-impedance ground plane, and decouple the supply near the package. Avoid long high-impedance input traces because leakage and board contamination can increase offset error. Review the manufacturer datasheet for the exact pin assignment, input common-mode limits, output swing, supply-current behavior, and recommended compensation values. This page combines the LM324ANG’s core electrical and package characteristics with application guidance, design notes, and practical drop-in alternatives. It is intended to help engineers select the part quickly, compare equivalent quad op amps, and plan a PCB or replacement strategy without overlooking the limitations of a general-purpose operational amplifier.

RFQ Kontak
LM324ANS - Quad 14-SO General-Purpose Op Amp | Texas Instruments
LM324ANS

LM324ANS - Quad 14-SO General-Purpose Op Amp | Texas Instruments

The Texas Instruments LM324ANS is a quad general-purpose operational amplifier packaged in a 14-pin SOIC (14-SO) package. It contains four independent, internally frequency-compensated amplifier sections designed for low-cost signal conditioning, voltage amplification, filtering, comparison, and general analog control applications. The device supports single-supply or dual-supply operation across a wide voltage range, making it suitable for industrial, consumer, instrumentation, and educational equipment. An operational amplifier, or op amp, is a high-gain differential-input amplifier whose feedback network determines the closed-loop behavior. The LM324 belongs to the linear-amplifier hierarchy within the broader voltage-feedback amplifier and analog-signal-conditioning categories. Its four independent sections allow one package to implement several stages in a circuit without requiring four separate amplifier packages. Key features of the LM324ANS include four amplifier sections in one 14-SO package, internal frequency compensation, operation from a single power supply, operation with a positive ground-referenced common-mode input range, and low supply-current consumption. The internal compensation simplifies design because most closed-loop gain configurations do not require an external frequency-compensation capacitor. The wide common-mode and supply ranges are useful when sensing signals near ground or operating from a single battery-derived rail. Each amplifier section has differential inputs and an output, while the package provides a common supply connection. Because the LM324 is intended for general-purpose analog work, it is more appropriate for moderate-bandwidth signal conditioning than for high-speed precision applications. The device can buffer sensor outputs, amplify small voltage changes, implement active filters, and provide simple threshold-based control functions. Its internally compensated architecture favors straightforward, stable implementation over the flexibility of a high-performance precision amplifier. Typical applications include industrial sensor interfaces, audio preamplifier stages, low-frequency active filters, control-loop amplifiers, data acquisition front ends, and educational analog systems. In a sensor interface, the quad configuration can amplify the transducer output, buffer the reference, provide gain, and drive a following filtering stage. In audio equipment, separate sections can handle input amplification, tone-control filtering, and output buffering. The 14-SO package also simplifies assembly in designs that require a quad amplifier but not a high-pin-count or high-speed package. When laying out the circuit, place input and output decoupling capacitors close to the supply pins and keep sensitive input traces away from output and switching nodes. Check input and output common-mode limits for the selected supply voltage, especially when signals approach the positive rail. Use the manufacturer pinout and application guidance for the final PCB implementation.

RFQ Kontak
LM324ANSR - Quad 14-SO General-Purpose Op Amp | Texas Instruments (Tape & Reel)
LM324ANSR

LM324ANSR - Quad 14-SO General-Purpose Op Amp | Texas Instruments (Tape & Reel)

The Texas Instruments LM324ANSR is a quad general-purpose operational amplifier packaged in a 14-pin SOIC (14-SO) package. It contains four independent, internally frequency-compensated amplifier sections designed for low-cost signal conditioning, voltage amplification, filtering, comparison, and general analog control applications. The device supports single-supply or dual-supply operation across a wide voltage range, making it suitable for industrial, consumer, instrumentation, and educational equipment. An operational amplifier, or op amp, is a high-gain differential-input amplifier whose feedback network determines the closed-loop behavior. The LM324 belongs to the linear-amplifier hierarchy within the broader voltage-feedback amplifier and analog-signal-conditioning categories. Its four independent sections allow one package to implement several stages in a circuit without requiring four separate amplifier packages. Key features of the LM324ANSR include four amplifier sections in one 14-SO package, internal frequency compensation, operation from a single power supply, operation with a positive ground-referenced common-mode input range, and low supply-current consumption. The internal compensation simplifies design because most closed-loop gain configurations do not require an external frequency-compensation capacitor. The wide common-mode and supply ranges are useful when sensing signals near ground or operating from a single battery-derived rail. Each amplifier section has differential inputs and an output, while the package provides a common supply connection. Because the LM324 is intended for general-purpose analog work, it is more appropriate for moderate-bandwidth signal conditioning than for high-speed precision applications. The device can buffer sensor outputs, amplify small voltage changes, implement active filters, and provide simple threshold-based control functions. Its internally compensated architecture favors straightforward, stable implementation over the flexibility of a high-performance precision amplifier. Typical applications include industrial sensor interfaces, audio preamplifier stages, low-frequency active filters, control-loop amplifiers, data acquisition front ends, and educational analog systems. In a sensor interface, the quad configuration can amplify the transducer output, buffer the reference, provide gain, and drive a following filtering stage. In audio equipment, separate sections can handle input amplification, tone-control filtering, and output buffering. The 14-SO package also simplifies assembly in designs that require a quad amplifier but not a high-pin-count or high-speed package. When laying out the circuit, place input and output decoupling capacitors close to the supply pins and keep sensitive input traces away from output and switching nodes. Check input and output common-mode limits for the selected supply voltage, especially when signals approach the positive rail. Use the manufacturer pinout and application guidance for the final PCB implementation.

RFQ Kontak
LM324ANSRG4 - 1.2MHz Quad Op Amp | Texas Instruments
LM324ANSRG4

LM324ANSRG4 - 1.2MHz Quad Op Amp | Texas Instruments

Texas Instruments LM324ANSRG4 is a four-circuit general-purpose operational amplifier packaged in a 14-pin SOIC. The device combines a nominal gain-bandwidth product of 1.2 MHz with low supply-current drain of 0.8 mA typical, while its common-mode input range includes ground for convenient single-supply operation. The LM324 family integrates four amplifiers in one package, reducing board area compared with four individual single-amplifier packages. An operational amplifier is a voltage-gain element that uses differential input voltage to control an output. A quad operational amplifier contains four similar amplifier sections and belongs to the broader hierarchy of analog amplifiers, amplifier ICs, and integrated circuits. The LM324ANSRG4 is intended for general-purpose signal conditioning, where low cost, supply versatility, and straightforward operation are more important than high speed or low offset. Four amplifier circuits are provided in one 14-SOIC package, reducing component count and simplifying PCB assembly. The 1.2 MHz gain-bandwidth product supports applications operating at relatively low frequencies, including buffered sensor signals, slow analog control loops, audio paths, and general signal conditioning. A typical supply-current drain of 0.8 mA is useful for battery-powered or low-power equipment, although total system consumption also depends on the operating voltage and load on each amplifier. The common-mode input voltage range includes ground, allowing a single positive supply to process signals that approach 0 V. This characteristic simplifies sensor interfaces whose outputs remain near the lower supply rail. The device is identified as a standard general-purpose amplifier and is assembled in a surface-mount 14-SOIC package, which supports automated manufacturing and compact PCB layouts. Typical uses include four-channel sensor conditioning, low-frequency active filters, buffered analog inputs, general-purpose instrumentation, and educational or experimental amplifier circuits. Because the LM324ANSRG4 provides four matched functional sections, designers can allocate amplifiers to input buffering, gain stages, active filtering, and output conditioning within one package. A key design consideration is to keep each signal within the amplifier's common-mode and output-voltage limits throughout its operating range. Decoupling capacitors should be placed close to the power pins, and unused amplifier sections should be configured according to the manufacturer's recommendations rather than left floating. Stable feedback networks and suitable source and load impedances remain important for predictable closed-loop behavior. This product page combines package, electrical, application, sourcing, and replacement guidance in one engineering-oriented reference. It also distinguishes true same-footprint alternatives from broader LM324-family devices that use different packages, helping PCB designers avoid substitutions that require layout changes.

RFQ Kontak
LM324APWR - Quad 30V 1.2MHz Op Amp | Texas Instruments
LM324APWR

LM324APWR - Quad 30V 1.2MHz Op Amp | Texas Instruments

The Texas Instruments LM324APWR is a four-circuit general-purpose operational amplifier designed for single- or dual-supply operation. It provides a maximum supply rating of 30 V, a gain-bandwidth product of 1.2 MHz, input offset voltage of 3 mV, and four amplifiers in a 14-pin TSSOP package. The LM324APWR is intended for cost-sensitive analog signal conditioning, instrumentation, and control applications. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The LM324 belongs to the voltage-feedback operational-amplifier hierarchy, within analog ICs and broader semiconductor electronics. Its four amplifiers can perform independent functions or be configured for differential, summing, filtering, comparison, and feedback-amplifier circuits. This quad organization reduces component count and simplifies PCB layout in multi-channel analog systems. The LM324A family is optimized for general-purpose requirements rather than high-speed or precision applications. Key characteristics include four amplifier circuits, a 30 V maximum supply, 1.2 MHz gain-bandwidth product, and 3 mV input offset voltage. The LM324APWR temperature grade is specified from 0°C to 70°C, making it suitable for commercial equipment operating within that ambient range. The 14-TSSOP package also supports compact, surface-mounted PCB construction. The LM324 architecture uses four amplifiers operating from a common positive and negative supply. Its 1.2 MHz gain-bandwidth product is adequate for audio-frequency, sensor-interface, and low-to-moderate-bandwidth feedback loops. The 3 mV input offset specification is the primary limitation for high-precision bridge or current-sense measurements, where offset error can create a meaningful output error after amplification. Designers should calculate the closed-loop gain, output swing, input common-mode range, and required output-current margin for the intended circuit. Typical applications include four-channel sensor conditioning, industrial control signal interfaces, audio preamplifier stages, low-frequency active filters, and general instrumentation. Multiple LM324 channels can monitor several analog inputs in a controller or provide basic current-to-voltage conversion around resistive sensors. The device is also useful when one circuit needs buffering while other channels perform summing or active-filter functions. For a new design, verify the 0°C to 70°C temperature range, 30 V maximum supply, and 1.2 MHz bandwidth against the operating requirements. Place decoupling capacitors close to the supply pins, route each amplifier's feedback components close to the corresponding channel, and maintain compatible signal levels around the amplifier inputs. The LM324APWR is most appropriate when low cost, four integrated channels, and broad supply-voltage flexibility outweigh the lower bandwidth and higher offset of precision op amps. This product page combines manufacturer specifications, package and pin information, application guidance, and constrained drop-in alternatives. It also distinguishes temperature-grade and B-family options by their documented supply range, offset voltage, and operating-temperature differences, helping engineers make a PCB-compatible sourcing decision without confusing electrical equivalence with functional similarity.

RFQ Kontak
LM324APWRG4 - Quad General-Purpose Op Amp, 14-TSSOP | Texas Instruments
LM324APWRG4

LM324APWRG4 - Quad General-Purpose Op Amp, 14-TSSOP | Texas Instruments

The Texas Instruments LM324APWRG4 is a quadruple general-purpose operational amplifier in a 14-pin TSSOP package, containing four independent, internally frequency-compensated amplifiers designed to run from a single supply or split supply over a wide voltage range up to ±16 V (32 V total). Each channel offers a typical input offset voltage of ±3 mV, a supply-current drain of 0.8 mA typ per amplifier that stays essentially independent of supply voltage, and 2 kV ESD protection. An operational amplifier is a high-gain, differential-input, single-ended-output active device that drives its output toward the higher of its two inputs. The LM324 belongs to the quad general-purpose op-amp family, a direct descendant of the classic single LM741 architecture in which four amplifiers share one package. In the signal-chain hierarchy it sits between discrete transistor stages and precision instrumentation amplifiers: it is a voltage-feedback, internally compensated (unity-gain stable) amplifier aimed at cost-sensitive, high-volume analog signal conditioning. Key differentiators of the LM324A grade are the tighter ±3 mV typical input offset voltage and the enhanced ESD robustness compared with earlier LM324 revisions. Because each amplifier is internally compensated, it behaves correctly at unity gain without external frequency-compensation networks, and the common-mode input range includes ground so the device can be used in single-supply sensing circuits whose signal swings to 0 V. The A suffix denotes the improved-offset version, while the PWRG4 suffix denotes the 14-pin TSSOP, tape-and-reel, RoHS-green (lead-free) ordering code. Because the package is only 14 pins across and 0.8 mm pitch, four amplifiers fit into a footprint comparable to a single SOIC-14, which keeps quad-buffer, quad-instrumentation and multi-channel sensor-conditioning boards compact. Typical applications include sensor signal conditioning, low-side current monitoring, DC motor and actuator driver stages, audio mixer sub-circuits, temperature-controller error amplifiers, and general instrumentation buffers. Four matched channels in one package also reduce board area, ground-bounce risk, and part-count on multi-channel analog boards. When designing with the LM324APWRG4, remember that it is not a rail-to-rail input or output amplifier: the common-mode and output swing limits are set by the supply rails, so headroom of a few hundred millivolts must be reserved at the output. Decouple each supply pin locally, keep feedback loops short, and prefer the LM324A offset grade over the base LM324 when accuracy matters.

RFQ Kontak
LM324AWDT - Low-Power Quad Op Amp | STMicroelectronics
LM324AWDT

LM324AWDT - Low-Power Quad Op Amp | STMicroelectronics

STMicroelectronics LM324AWDT is a low-power, general-purpose quad operational amplifier containing four independent, internally frequency-compensated amplifiers in a 14-pin SO package. The device operates from a single supply or from split dual supplies, with a verified operating capability extending to ±15 V, equivalent to 30 V total supply span. Its four-circuit integration reduces board area and component count in analog signal-conditioning designs. An operational amplifier is an analog voltage amplifier whose gain, filtering, buffering, and feedback behavior are determined mainly by external components. The LM324 belongs to the general-purpose amplifier hierarchy: op amp, analog amplifier, signal-conditioning IC, and ultimately semiconductor. A quad package contains four amplifiers that may be used independently or together for instrumentation, control, filtering, and signal conversion. The LM324 family is designed for low power consumption and low input bias current. Internally compensated operation simplifies closed-loop design because no external compensation network is required for typical voltage-feedback use. The four amplifiers are independent, allowing simultaneous sensing and actuation, although the common supply pins mean that all four channels share the same supply-voltage and ground references. The A designation identifies a distinct qualification or ordering configuration within the LM324 family, while W indicates tape-and-reel packaging and DT identifies the 14-pin small-outline package. Engineers should confirm the exact temperature limits, electrical limits, and qualification status for the selected ordering code in the STMicroelectronics datasheet before using the device in a regulated end application. Typical uses include low-frequency sensor conditioning, feedback control loops, active filters, audio and communication signal paths, and general analog instrumentation. In a 5 V single-supply system, the common reference arrangement and input/output swing limits remain central design constraints. In split-supply circuits, the device is particularly useful when the signal can swing around 0 V. Keep input and output voltages within the absolute maximum ratings, observe the input common-mode range, and provide stable bypass capacitance near the supply pins. Because the LM324 is intended mainly for general-purpose and low-frequency work, designs requiring wide input swing, very low offset, high speed, rail-to-rail output, or low-noise performance should compare the exact datasheet limits against precision or modern amplifier families. This page combines the LM324AWDT family identity, package information, qualification distinctions, drop-in ordering options, application guidance, and practical design considerations in a format designed to help engineers evaluate replacements without overlooking the electrical differences between ordering codes.

RFQ Kontak
LM324AWPT - Quad Low-Power Op Amp, 1.3MHz, TSSOP-14 | STMicroelectronics
LM324AWPT

LM324AWPT - Quad Low-Power Op Amp, 1.3MHz, TSSOP-14 | STMicroelectronics

The STMicroelectronics LM324AWPT is a low-power, low-input-bias-current quad operational amplifier integrating four independent, internally frequency-compensated gain stages in a single 14-pin TSSOP (Tape and Reel) package. The 'A' suffix designates the enhanced input-offset-voltage grade, which tightens Vio to a maximum of 2 mV at 25°C versus 7 mV for the standard LM324, while the 'W' suffix extends the operating temperature range to -40°C to +105°C for industrial environments. Each of the four channels delivers a gain-bandwidth product of approximately 1.3 MHz and a slew rate of 0.4 V/µs, drawing only 1.5 mA of quiescent supply current total regardless of channel loading. A quad operational amplifier (quad op-amp) is a monolithic integrated circuit that places four independent, internally-compensated op-amp cells in one package sharing common power pins. Quad op-amps belong to the broader operational amplifier family, which in turn falls under the linear IC hierarchy and finally under analog signal-conditioning semiconductors. Compared with single or dual op-amps, quad devices reduce PCB area, simplify routing, and lower the per-channel cost in applications requiring multiple gain, buffer, filter or comparator stages. The LM324 series uses bipolar transistor input stages that can operate from a single supply as low as 3 V or from split ±1.5 V to ±16 V rails, with true ground-sensing capability on the input common-mode range. The differential input range includes the negative rail, eliminating the need for external biasing in single-supply designs. Output swing typically reaches within a few millivolts of both rails at moderate loads, and the device sustains continuous output short-circuits to ground or either rail thanks to internal current limiting. Typical applications include active filters, transducer signal conditioning, DC gain blocks, voltage followers, comparators, and general-purpose analog signal chains in consumer, industrial and automotive subsystems. The wide supply range makes the part especially popular in 5 V single-rail microcontroller-interface circuits, where four op-amps share one supply rail alongside the MCU. When designing with the LM324AWPT, place a 0.1 µF ceramic bypass capacitor within 5 mm of the VCC pin and consider the input bias current of 20 nA typical (50 nA maximum) when selecting source impedances — bias currents up to 50 nA across a 100 kΩ source produce a 5 mV offset error. Avoid using this part in precision sub-millivolt instrumentation paths; choose the LM324A-grade offset only when 2 mV is acceptable. Always consult the official STMicroelectronics datasheet for full DC and AC characteristic curves.

RFQ Kontak
LM324BAIDR - Quad 36V 1.2MHz Op-Amp | Texas Instruments
LM324BAIDR

LM324BAIDR - Quad 36V 1.2MHz Op-Amp | Texas Instruments

The Texas Instruments LM324BAIDR is a quadruple operational amplifier featuring four general-purpose amplifier channels with a 36V maximum supply, 1.2MHz gain-bandwidth product, and a low input offset voltage of 2mV (B, BA versions), housed in a 14-pin SOIC (D) package rated for -40C to +85C operation. An operational amplifier (op-amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, the fundamental building block of analog signal conditioning. In the analog hierarchy, the op-amp sits above discrete transistors and below specialized amplifiers such as instrumentation and audio amplifiers; general-purpose quad op-amps like the LM324 family provide four independent channels in one package for cost-sensitive multi-channel designs. The LM324BA is the next-generation BA version of the classic LM324. Key improvements over legacy LM324/LM224/LM2902 parts include a wide 3V to 36V supply range, tighter 2mV input offset voltage specification, and enhanced robustness, while remaining pin-for-pin drop-in replacements for all legacy versions. The push-pull output stage improves output voltage swing and crossover behavior compared to older Class-AB output stages, reducing the well-known LM324 output crossover distortion near the negative rail. Each of the four amplifiers shares a common supply; single-supply operation down to 3V makes the part suitable for 3.3V and 5V logic-based systems as well as traditional up to 36V industrial rails. The common-mode input range includes the negative rail, a signature LM324-family trait that simplifies single-supply designs such as sensor buffering near ground. Typical applications include industrial signal conditioning, transducer amplifier front ends, active filters, comparators and level shifters, motor-control feedback loops, and consumer appliance analog interfaces. Design consideration: the 1.2MHz gain-bandwidth limits closed-loop bandwidth; at a gain of 10, expect roughly 120kHz of usable bandwidth, so verify gain-phase margin in high-gain configurations. This page synthesizes verified distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet alone.

RFQ Kontak
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D

LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)

The Texas Instruments LM324D is a low-power, quadruple operational amplifier containing four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin SOIC package. The verified product data identifies it as a general-purpose amplifier designed for operation from a single supply or split supply over a wide voltage range, with the B-family supply range specified as 3 V to 36 V. This quad topology lets one compact IC provide four separate analog signal-conditioning channels without requiring four discrete packages. An operational amplifier is an analog amplifier used in the wider semiconductor hierarchy of integrated circuits and analog signal-processing devices. The LM324 family is commonly used for voltage buffering, sensor-interface conditioning, current-to-voltage conversion, audio paths, filters, and control loops. Its single-supply capability is useful when the signal and system share a common ground reference, while split-supply operation supports bipolar signals in applications where positive and negative rails are available. Verified feature data identifies the LM324 family as a next-generation LM324B and LM2902B offering, with B versions intended as drop-in replacements for LM224, LM324, and LM2902 versions. The listed operating supply range is 3 V to 36 V. The family also includes versions with input offset voltage specified as low as plus or minus 2 mV, 2 kV HBM ESD protection for B, BA, and K versions, and internal RF and EMI filtering for B and BA versions. These features support general-purpose analog designs where supply tolerance and input conditioning matter. The LM324D is packaged in the SOIC-14 footprint, making it suitable for conventional PCB assembly and educational, industrial-control, instrumentation, and embedded-control designs. The device is not a precision, rail-to-rail-input amplifier, so input common-mode range, output swing, input bias current, noise, slew rate, and stability behavior must be checked against the actual signal path. The four amplifiers share a package power supply but operate independently at their input, output, and feedback pins. Typical uses include four-channel sensor buffering, low-frequency active filtering, audio preamplification, DC gain stages, comparator-style threshold conditioning with suitable feedback arrangements, and general embedded analog interfaces. When designing around the LM324D, verify the supply rails, keep input and feedback connections short, provide stable bypass capacitance near the supply pins, and account for the amplifier’s output-current and thermal limits. The manufacturer product page and datasheet are the authoritative sources for exact electrical limits and ordering information. This page combines verified manufacturer and distributor links with application guidance and explicitly marks electrical details that were not supplied in the verified excerpts. The LM324D remains a practical choice when four general-purpose amplifiers, single-supply operation, and a standard SOIC-14 footprint are more important than precision or rail-to-rail performance.

RFQ Kontak
LM324DE4 - Quad 1.2MHz Op Amp, 14-SOIC | Texas Instruments
LM324DE4

LM324DE4 - Quad 1.2MHz Op Amp, 14-SOIC | Texas Instruments

Texas Instruments LM324DE4 is a general-purpose quad operational amplifier with four amplifiers, 1.2 MHz gain-bandwidth product, 0.5 V/µs slew rate, and a ±1.5 V to ±16 V supply range, packaged in a 14-pin SOIC. Each amplifier is designed for conventional analog signal-conditioning applications where low cost, wide supply-voltage operation, and four independent channels in one package are important. An operational amplifier is an amplifier IC that uses high open-loop gain and negative feedback to control gain accurately. The LM324 family combines four general-purpose amplifier channels with internal biasing, allowing each channel to operate without external bias-current compensation in typical applications. Within the semiconductor hierarchy, it belongs to the operational-amplifier, analog-amplifier, analog-IC, and integrated-circuit categories. The four internal channels can be configured as voltage followers, non-inverting or inverting amplifiers, summers, differential amplifiers, filters, comparators, and current-to-voltage converters. A 1.2 MHz gain-bandwidth product is appropriate for audio-frequency and general feedback-control circuits, while the 0.5 V/µs slew rate limits how quickly large voltage changes can be reproduced. The manufacturer datasheet identifies the device as a general-purpose amplifier with four circuits and a 14-pin SOIC package. The architecture makes efficient use of board area by placing four amplifiers in one package. Rail-to-rail output operation and the broad supply range allow the device to operate from single or dual supplies within the stated limits. Its 0.8 mA typical current drain is useful for low-power analog systems, although actual supply current depends on the number of active channels and load conditions. The package is suitable for conventional surface-mount PCB assembly. Typical LM324DE4 applications include audio preamplification, sensor signal conditioning, DC motor-control support circuits, battery-powered instrumentation, general-purpose filters, and active control loops. In multi-channel designs, the common package simplifies routing and inventory management while keeping each amplifier electrically independent. The amplifier should be selected when low bandwidth is acceptable and when a cost-conscious general-purpose implementation is more important than high-speed or low-noise performance. Design with adequate input common-mode range, output-current capability, and supply headroom. Decoupling capacitors should be placed close to the supply pins, and output loads must remain within the package and device thermal limits. Because the LM324DE4 is supplied in a tube, PCB assembly processes must support tube-fed components or require an approved conversion step before placement. This product page consolidates the exact LM324DE4 electrical and package specifications, verified same-package replacement information, a parameter comparison, application guidance, and practical PCB design notes. It is intended to accelerate component selection while preserving the distinction between exact-orderable versions and broader LM324-family devices.

RFQ Kontak
LM324DG - 4-Channel 1 MHz Op Amp, 3-32 V | onsemi
LM324DG

LM324DG - 4-Channel 1 MHz Op Amp, 3-32 V | onsemi

The onsemi LM324DG is a four-channel general-purpose operational amplifier with true differential inputs, 1 MHz gain-bandwidth product, 0.6 V/us slew rate, and a 3 V to 32 V supply range, housed in a 14-pin SOIC package. The four amplifiers share one package but operate independently, making the device suitable for compact analog signal-conditioning circuits that cannot justify four separate amplifiers. An operational amplifier, or op amp, is a voltage-controlled differential amplifier whose open-loop gain is used to amplify a difference between two input signals. The LM324 belongs to the broader amplifier IC hierarchy: operational amplifier, analog amplifier, semiconductor, and integrated circuit. Its true differential inputs and ability to operate from a single positive supply are particularly useful in circuits that do not have a negative reference rail. Key features include four amplifier channels in one package, a 1 MHz gain-bandwidth product, a 0.6 V/us slew rate, input offset voltage ratings of 5 mV to 7 mV depending on the cited source, and a minimum common-mode rejection ratio of 65 dB. The 3 V to 32 V operating supply range supports both low-voltage logic systems and conventional industrial analog circuits without requiring a separate negative supply. The LM324 architecture is intended for general-purpose voltage amplification rather than precision or high-speed signal conditioning. Its relatively wide input offset voltage and modest gain-bandwidth product make it most appropriate for audio, transducer, buffering, and feedback-control stages where moderate accuracy and bandwidth are sufficient. Designers should account for input offset when measuring small signals and verify gain-bandwidth requirements for closed-loop applications. Typical uses include microphone preamplification, active audio-channel amplification, low-frequency sensor interfaces, industrial control loops, and general buffer stages. Because each channel can be assigned to a different signal or function, four independent amplifier circuits can be implemented on one board while reducing component count and simplifying routing. The primary design consideration is the absence of a negative supply in many applications. Input and output signals must remain within the device's common-mode input and output swing limits, so a negative rail is not required but can improve signal-headroom flexibility. Input and output decoupling should follow the manufacturer datasheet's recommended application circuit, and unused amplifier inputs must be biased so they remain in a defined operating state. This product page consolidates the verified LM324DG specifications, distributor references, drop-in replacement candidates, package details, and practical design guidance. It also distinguishes direct same-package substitutes from functional alternatives so engineers can narrow a replacement search without assuming that every quad op amp is electrically or mechanically interchangeable.

RFQ Kontak
LM324DG4 - Quad 1.2MHz Op Amp | Texas Instruments
LM324DG4

LM324DG4 - Quad 1.2MHz Op Amp | Texas Instruments

The Texas Instruments LM324DG4 is a general-purpose, four-circuit operational amplifier with a 1.2 MHz unity-gain bandwidth, differential inputs, and a 14-pin SOIC package. It is designed for economical signal conditioning in industrial, instrumentation, control, and sensor-interface systems that operate from a single supply or split supply. Its four amplifiers share common supply pins but have independent input, output, and internal-offset connections. An operational amplifier is an active semiconductor device that amplifies the voltage difference between its differential inputs while using negative feedback to define closed-loop gain and bandwidth. The LM324 belongs to the operational-amplifier hierarchy, where it is also classified as a quad general-purpose amplifier, analog amplifier IC, and signal-conditioning semiconductor. This category makes the LM324 suitable for buffer, amplifier, comparator, differential, and current-to-voltage conversion circuits. The LM324DG4 combines four amplifiers in one 14-SOIC package, reducing component count and board area compared with four single-amplifier packages. Its 1.2 MHz gain-bandwidth product supports general-purpose signal amplification rather than high-speed precision work. The common-mode input range includes ground, which allows single-supply sensing of signals near the lower supply rail. A typical low supply-current drain of 0.8 mA per amplifier also supports power-conscious designs. The LM324 architecture is suited to low- and moderate-frequency closed-loop applications where economy, ease of use, and supply flexibility matter. Because the device includes internal bias compensation, external nulling components are not required for normal operation. The common-mode range includes ground but does not extend to the positive supply rail, so input and output headroom must be checked when signals approach either rail. Typical applications include sensor-signal conditioning, transducer amplification, current-to-voltage conversion, audio preamplification, low-frequency active filters, and general industrial control interfaces. In each case, the amplifier operates inside a negative-feedback network, and the closed-loop bandwidth and output swing must satisfy the signal amplitude and accuracy requirements. A key design consideration is rail-to-rail compatibility. The LM324 can operate from one supply or two supplies, but its output cannot swing fully to the positive rail and input signals must remain inside its common-mode range. Decoupling near the supply pins, stable feedback-component selection, and output-loading checks remain necessary even though the circuit is commonly used with basic resistor networks. This page combines the verified LM324DG4 device identity, package information, functional characteristics, source links, and engineering guidance with application-oriented selection criteria. It also distinguishes electrically meaningful alternatives from simple reel or tape packaging codes and highlights where compatibility checks are required before substitution.

RFQ Kontak
LM324DR - Quad 36V Op Amp | Texas Instruments | SOIC-14
LM324DR

LM324DR - Quad 36V Op Amp | Texas Instruments | SOIC-14

The Texas Instruments LM324DR is a low-power, quadruple operational amplifier containing four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin SOIC package. The verified product data identifies it as a general-purpose amplifier designed for operation from a single supply or split supply over a wide voltage range, with the B-family supply range specified as 3 V to 36 V. This quad topology lets one compact IC provide four separate analog signal-conditioning channels without requiring four discrete packages. An operational amplifier is an analog amplifier used in the wider semiconductor hierarchy of integrated circuits and analog signal-processing devices. The LM324 family is commonly used for voltage buffering, sensor-interface conditioning, current-to-voltage conversion, audio paths, filters, and control loops. Its single-supply capability is useful when the signal and system share a common ground reference, while split-supply operation supports bipolar signals in applications where positive and negative rails are available. Verified feature data identifies the LM324 family as a next-generation LM324B and LM2902B offering, with B versions intended as drop-in replacements for LM224, LM324, and LM2902 versions. The listed operating supply range is 3 V to 36 V. The family also includes versions with input offset voltage specified as low as plus or minus 2 mV, 2 kV HBM ESD protection for B, BA, and K versions, and internal RF and EMI filtering for B and BA versions. These features support general-purpose analog designs where supply tolerance and input conditioning matter. The LM324DR is packaged in the SOIC-14 footprint, making it suitable for conventional PCB assembly and educational, industrial-control, instrumentation, and embedded-control designs. The device is not a precision, rail-to-rail-input amplifier, so input common-mode range, output swing, input bias current, noise, slew rate, and stability behavior must be checked against the actual signal path. The four amplifiers share a package power supply but operate independently at their input, output, and feedback pins. Typical uses include four-channel sensor buffering, low-frequency active filtering, audio preamplification, DC gain stages, comparator-style threshold conditioning with suitable feedback arrangements, and general embedded analog interfaces. When designing around the LM324DR, verify the supply rails, keep input and feedback connections short, provide stable bypass capacitance near the supply pins, and account for the amplifier’s output-current and thermal limits. The manufacturer product page and datasheet are the authoritative sources for exact electrical limits and ordering information. This page combines verified manufacturer and distributor links with application guidance and explicitly marks electrical details that were not supplied in the verified excerpts. The LM324DR remains a practical choice when four general-purpose amplifiers, single-supply operation, and a standard SOIC-14 footprint are more important than precision or rail-to-rail performance.

RFQ Kontak
LM324DR2 - 4-Op-Amp 32V 1MHz SOIC-14 | onsemi
LM324DR2

LM324DR2 - 4-Op-Amp 32V 1MHz SOIC-14 | onsemi

onsemi LM324DR2 is a four-amplifier general-purpose operational amplifier integrated circuit with true differential inputs, designed for single-supply operation over a 3 V to 32 V supply range. Each of the four amplifiers supports rail-to-rail output swing, operates at approximately 1 MHz gain-bandwidth product, and offers a typical slew rate of 0.6 V/µs. The device is packaged in a 14-pin SOIC configuration identified as LM324DR2. An operational amplifier is an analog signal-conditioning semiconductor that compares two input voltages and amplifies the difference between them. The LM324 belongs to the quad operational-amplifier family within the broader voltage-amplifier and analog IC hierarchy. Its four amplifiers can perform amplification, buffering, voltage comparison, summation, subtraction, filtering, and transducer-interface functions while sharing one supply package. The LM324 series provides distinct advantages for single-supply systems. True differential inputs allow the amplifiers to operate around ground without requiring a dual supply in many common circuit arrangements. The input common-mode range includes ground, while the output stage can swing close to the negative supply under suitable load conditions. These characteristics make the device useful for battery-powered instrumentation, control loops, sensor interfaces, audio paths, and general industrial signal conditioning. Each amplifier is implemented with true differential input behavior rather than a simple differential-input architecture. The operating bandwidth is approximately 1 MHz, with a typical slew rate of 0.6 V/µs. The offset voltage specification reaches up to 9 mV, while the input bias current is typically 45 nA. The integrated design eliminates the need for four separate single-amplifier packages when a circuit requires several matched functional blocks. Typical uses include low-side current sensing, transducer buffering, active filtering, level shifting, comparator-style threshold circuits, and general instrumentation. The LM324DR2 is particularly suitable for cost-sensitive designs that need four amplifiers but do not require rail-to-rail input operation or the lower offset and bias current of precision amplifier families. Designers should verify input and output common-mode limits at the selected supply voltage and load. Because the output cannot normally reach the positive supply rail, headroom must be preserved when using the device as a buffer. Stable operation also depends on correct feedback compensation, suitable bypass capacitance, source impedance, and load drive. This product record combines the verified LM324DR2 identity and 14-SOIC configuration with practical guidance covering single-supply design, common-mode behavior, application selection, PCB implementation, and honest trade-offs among same-footprint quad-amplifier alternatives.

RFQ Kontak
LM324DR2G - Quad Op Amp, 3-32V, 1MHz SOIC-14 | onsemi
LM324DR2G

LM324DR2G - Quad Op Amp, 3-32V, 1MHz SOIC-14 | onsemi

The onsemi LM324DR2G is a low-cost quad operational amplifier with four internally compensated, true-differential-input amplifiers in a 14-pin SOIC package, operating from a single 3V to 32V supply (or dual supplies up to +/-16V) with a 1 MHz gain-bandwidth product and 0.6 V/us slew rate. An operational amplifier (op-amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, the foundational building block of the analog signal-chain hierarchy: op-amp -> amplifier IC -> analog front end -> mixed-signal system. The LM324 family is the industry-standard general-purpose quad op-amp, designed specifically for single-supply operation where its input common-mode range includes ground and its output swings to within tens of millivolts of the negative rail. Key features include a wide single-supply range of 3V to 32V, a common-mode input range that extends to the negative rail (ground-sensing capability), a typical input offset voltage of 5 mV (7 mV max per datasheet specifications), a minimum common-mode rejection ratio of 65 dB, and low supply current per amplifier that suits battery-powered designs. Four amplifiers in one SOIC-14 package reduce board area and BOM cost versus four single op-amps. The bipolar architecture is internally frequency-compensated, so no external compensation capacitors are required for unity-gain stability. Because all four amplifiers share one bias network, supply current is lower than four discrete units; however, channels can exhibit minor crosstalk in high-gain audio paths. Typical applications include transducer amplifiers, active filters, comparators (with caution regarding slow recovery), DC gain blocks, level shifters, and signal conditioning in industrial controls, consumer appliances, and automotive-adjacent systems. Designers should note the output stage is not rail-to-rail and can crossover-distort when sourcing current near the negative rail; biasing the output with a pull-down resistor mitigates this. Gain-bandwidth is 1 MHz, so keep closed-loop gains modest for bandwidth-critical circuits. This page adds value beyond the datasheet with distributor pricing tiers, verified drop-in alternatives, a parameter-by-parameter comparison table, and practical design notes not found on the manufacturer product page.

RFQ Kontak
LM324DRE4 - Quad 1.2MHz Op Amp | Texas Instruments | SOIC-14
LM324DRE4

LM324DRE4 - Quad 1.2MHz Op Amp | Texas Instruments | SOIC-14

Texas Instruments LM324DRE4 is a low-power, quadruple general-purpose operational amplifier packaged in a 14-pin SOIC. Each of its four independent amplifier sections supports single-supply or split-supply operation, features internal frequency compensation, and includes an input common-mode range that reaches ground. The device operates with low supply-current drain that is largely independent of supply voltage, making it suitable for portable instrumentation and low-power signal-processing systems. An operational amplifier is an analog signal-processing IC that uses high open-loop gain and negative feedback to amplify voltage differences. The LM324 belongs to the general-purpose op-amp family, a versatile subset of amplifier ICs used for buffering, amplification, comparisons, summing, filtering, and control applications. Its four independent sections allow one package to implement several analog functions without requiring four separate single-amplifier packages. The headline operating characteristics include a 1.2 MHz gain-bandwidth product, 0.5 V/us slew rate, and 0.8 mA typical supply-current drain. The 14-pin SOIC package measures 3.90 mm in body width and supports conventional surface-mount assembly. Each amplifier is internally frequency compensated, allowing operation as a closed-loop amplifier without external compensation components in standard configurations. LM324-family devices are designed for broad supply-voltage operation and can also work with positive and negative supplies. Their low quiescent current and ground-referenced common-mode input capability are useful in sensor interfaces powered from a single rail. The amplifier sections operate independently, although sharing the same package provides common supply and ground pins. Typical uses include low-frequency sensor signal conditioning, buffered analog inputs, DC voltage amplification, comparator-style threshold circuits, audio preamplification, and low-frequency active filters. Because the LM324 is intended for general-purpose, low-bandwidth signal conditioning rather than high-speed precision work, system design should account for its 1.2 MHz gain-bandwidth product and 0.5 V/us slew rate. A practical design consideration is common-mode and output range: an input or output operating point must remain inside the amplifier's usable voltage range. Place supply-bypass capacitors close to the supply and ground pins, and route sensitive input traces away from switching nodes and high-current return paths. This page combines package and application guidance with a focused replacement analysis, helping engineers distinguish electrical-compatible alternatives from merely similar quad op-amp families before committing a design to the SOIC-14 footprint.

RFQ Kontak
LM324DRG3 - 4-Channel 1.2MHz Op Amp | Texas Instruments
LM324DRG3

LM324DRG3 - 4-Channel 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM324DRG3 is a four-channel, general-purpose operational amplifier packaged in a 14-pin SOIC. Each channel provides a 1.2 MHz gain-bandwidth product and a 0.5 V/µs slew rate, making the device suitable for general signal amplification, buffering, and basic analog-control applications. The LM324DRG3 operates from a single supply or split supply and contains four independent, high-gain, frequency-compensated amplifiers. An operational amplifier is a voltage-feedback analog IC that uses differential input voltage to control an amplified output. The LM324 family combines four amplifiers in one package, reducing component count and simplifying layout for low-frequency instrumentation, sensor interfaces, audio paths, and industrial control circuits. Its frequency compensation provides stable operation without an external compensation network in typical closed-loop configurations. The LM324DRG3 provides four general-purpose amplifier circuits, a 1.2 MHz gain-bandwidth product, and a 0.5 V/µs slew rate. Its supply current is listed at 0.8 mA typical, with low supply-current drain described as independent of supply voltage. These characteristics make it practical for battery-operated and low-power analog systems where bandwidth beyond audio and general instrumentation frequencies is not required. Each amplifier is independent, allowing one package to serve four separate signal channels. The device is designed for single-supply operation, split-supply operation, and standard feedback-control topologies. Because its bandwidth and slew rate are modest, applications requiring wideband precision, high output current, rail-to-rail input or output, or fast settling should use a more specialized amplifier family instead. Typical uses include low-frequency sensor conditioning, current-to-voltage conversion, audio preamplification, low-level signal buffering, and general industrial control loops. A common circuit places a resistive feedback network around each amplifier, uses the fourth channel for biasing or active filtering, and decouples the supply pins close to the package with a local bypass capacitor. Design around the 14-pin SOIC footprint and verify the exact pinout in the manufacturer pin-description table before assigning tracks. Keep input and feedback resistors close to their associated pins to minimize parasitic capacitance and oscillation risk. Check output swing, input common-mode range, output loading, and supply limits against the circuit operating points before production release. This page organizes the verified LM324DRG3 specifications, package information, comparisons, and design guidance into one engineering-focused reference. It also distinguishes exact drop-in options from broader functional alternatives and identifies where additional datasheet review is required before substitution.

RFQ Kontak
LM324DRG4 - Quad 1.2 MHz Op Amp | Texas Instruments
LM324DRG4

LM324DRG4 - Quad 1.2 MHz Op Amp | Texas Instruments

Texas Instruments LM324DRG4 is a low-power, general-purpose quadruple operational amplifier packaged in a 14-pin SOIC. It integrates four independent, high-gain, frequency-compensated amplifiers, and the product listing identifies a gain-bandwidth product of 1.2 MHz. Each amplifier can operate from a single supply or split supply, making the device suitable for general signal-conditioning and control functions that require multiple amplifier channels in one package. An operational amplifier is an analog integrated circuit that uses high open-loop gain and negative feedback to amplify small voltage differences. Quad operational amplifiers combine four individual amplifiers into one package, reducing component count and simplifying PCB routing compared with four separate single or dual amplifier packages. The LM324 family belongs to the broader operational-amplifier, analog-amplifier, and semiconductor hierarchy and is widely positioned for cost-sensitive, general-purpose applications. The LM324DRG4 provides four amplifier channels in one 14-SOIC package and supports operation across single- and split-supply arrangements. Its 1.2 MHz gain-bandwidth product is suitable for moderate-bandwidth signal amplification, while the internal frequency compensation simplifies closed-loop use. Because the device is intended for general-purpose work, designers should verify input common-mode range, output swing, input offset, supply current, and output-current requirements against the manufacturer datasheet for the intended application. Four independent channels permit simultaneous signal processing without crosstalk between amplifier sections. A typical quad device can implement two differential amplifiers, four voltage followers, cascaded gain stages, sensor-conditioning channels, or a mixture of these functions. The internal compensation architecture is intended to provide stable operation in common feedback configurations, but loop gain, source impedance, capacitive loading, and output drive still require application-level validation. Typical uses include low-frequency sensor interfaces, current-to-voltage conversion, general-purpose signal conditioning, industrial control blocks, audio preamplifier stages, and educational or prototype circuits. The single 14-SOIC package is especially useful when board area is constrained and several independent analog channels are required. It can also reduce assembly time and simplify power distribution because all four amplifier sections use the same supply pins. Designers should confirm the exact electrical limits before finalizing a circuit. In particular, single-supply operation can constrain the usable input and output ranges, and the common-mode and output-swing boundaries must not be confused with the supply-voltage limits. Input and output stability should also be checked when driving capacitive loads or operating with unusually high source impedances. This product record combines the manufacturer-defined device identity, package information, operating characteristics, compatible family options, application guidance, and PCB-focused design considerations. It also distinguishes documented facts from parameters that require direct confirmation in the manufacturer datasheet, helping engineers plan the LM324DRG4 for general-purpose analog designs before schematic release.

RFQ Kontak
LM324DST - Quad Op-Amp, 14-SOIC, Low Power | STMicroelectronics
LM324DST

LM324DST - Quad Op-Amp, 14-SOIC, Low Power | STMicroelectronics

The STMicroelectronics LM324DST is a quad general-purpose operational amplifier integrating four independent, internally frequency-compensated high-gain op-amp circuits in a 14-pin SOIC (SO-14) surface-mount package. It operates from a single supply and delivers an output current capability of approximately 70 mA per the LCSC product listing, with low power consumption and low input bias current. A quad op-amp is an integrated circuit that houses four separate operational amplifiers on one die. An operational amplifier is a high-gain DC-coupled voltage amplifier with differential inputs and, in this family, a single-ended output; it is the foundational building block of the analog signal-chain hierarchy (op-amp -> amplifier IC -> linear IC -> analog/mixed-signal semiconductor). Quad op-amps like the LM324x family are chosen when multiple amplification stages share a common supply and ground, halving board area versus four single op-amps. Key features of the LM324DST include four internally compensated amplifiers requiring no external frequency-compensation components, wide single-supply operation, and an output that swings close to the negative rail, which is valuable in single-supply designs. The common-mode input range extends to include the negative supply rail, enabling sensing near ground. The internal compensation is implemented on-chip, giving unity-gain stability without external capacitors. This makes the part forgiving in general-purpose amplification, active filtering, comparators (non-precision), oscillators, and transducer interface circuits. Typical applications include industrial signal conditioning, consumer audio preamplification, battery-powered instrumentation, and logic-level level-shifting or buffering where four matched gain blocks are needed on one rail. Design consideration: the LM324 class-B output stage can exhibit crossover distortion at light loads and near-zero output currents; for precision AC applications consider a rail-to-rail upgrade such as the TL074 (JFET input) after verifying bias-current requirements. This page synthesizes distributor pricing, verified drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet alone.

RFQ Kontak
LM324DT - Quad Operational Amplifier | STMicroelectronics
LM324DT

LM324DT - Quad Operational Amplifier | STMicroelectronics

The LM324DT is a quad operational amplifier from STMicroelectronics, featuring four independent, high-gain, internally frequency-compensated op-amps designed to operate from a single power supply over a wide range of voltages. It operates from 3V to 32V (or ±1.5V to ±16V dual supply) and delivers a typical output current of 40mA per channel. The device is housed in a 14-pin SOIC package, making it suitable for space-constrained PCB designs. Data verified as of 2026-08-05. An operational amplifier (op-amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used in analog signal conditioning, filtering, and mathematical operations. The LM324 is a classic general-purpose op-amp family, known for its low cost, wide supply range, and ability to operate with a single supply, making it a staple in analog electronics. It sits within the hierarchy: operational amplifier -> linear amplifier -> analog IC -> semiconductor. Key features include a wide supply voltage range (3V to 32V), low supply current (typically 700µA per amplifier), common-mode input voltage range including ground, and short-circuit protected outputs. The LM324DT also features true differential input stage, which allows the input to go below ground when operating from a single supply, and it has a typical gain-bandwidth product of 1.3MHz. These features make it versatile for many analog applications. The LM324 uses a bipolar transistor architecture with a class-AB output stage, providing low output saturation voltage and high output current capability. It has an input offset voltage of typically 2mV and input bias current of typically 20nA, which are adequate for many precision applications. The device is internally frequency compensated for unity-gain stability, eliminating the need for external compensation components. Typical applications include transducer amplifiers, DC gain blocks, active filters, and general-purpose signal conditioning in industrial, automotive, and consumer electronics. Its single-supply operation makes it ideal for battery-powered devices and automotive sensor interfaces where a negative rail is not available. When designing with the LM324DT, ensure proper decoupling of the power supply pins with a 0.1µF ceramic capacitor close to the device. The output can swing close to the positive rail but not to the negative rail (ground) when using a single supply, so consider the output voltage range in your design. Also, avoid exceeding the absolute maximum supply voltage of 32V to prevent damage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet, providing a comprehensive resource for engineers selecting the LM324DT.

USD $0.08 Kontak
LM324DTB - 4-Channel 3-32V Op Amp | onsemi
LM324DTB

LM324DTB - 4-Channel 3-32V Op Amp | onsemi

onsemi LM324DTB is a four-circuit, general-purpose operational amplifier designed for single-supply operation in a 14-pin TSSOP package. Its 3 V to 32 V operating range, 5 mV input offset voltage, true differential inputs, and four amplifiers in one package make it useful for general-purpose signal conditioning, voltage buffering, feedback control, and low-to-moderate-precision analog circuits. An operational amplifier is an active analog signal-processing component that amplifies the voltage difference between its inverting and non-inverting inputs. A quad operational amplifier contains four amplifier sections in one package, reducing component count and simplifying multi-channel designs. Within the broader hierarchy, the LM324 belongs to the operational-amplifier family within analog and mixed-signal semiconductors, commonly used for amplification, filtering, comparison, and feedback control. The LM324 family is optimized for economical single-supply operation. Its broad 3 V to 32 V supply range permits use in low-voltage 3 V systems as well as higher-voltage industrial rails. True differential inputs support conventional non-inverting and inverting amplifier configurations, while four independent amplifier sections allow consistent signal paths across multiple channels. The specified 5 mV input offset voltage is appropriate for general-purpose rather than precision instrumentation applications. This onsemi implementation is identified as a standard general-purpose amplifier in a 14-TSSOP package. The surface-mount package reduces board area compared with a through-hole 14-pin package, while four circuits in one package can simplify routing when the design includes several similar analog channels. The TSSOP lead pitch requires careful PCB layout, particularly for input routing, bypassing, and exposed thermal management around the device. Typical uses include sensor-signal conditioning, low-side current monitoring, audio and communications interfaces, general feedback loops, active filtering, and industrial control modules. In each case, the amplifier's input bias current, common-mode range, output swing, stability behavior, and operating voltage should be checked against the actual signal and load requirements before the circuit is finalized. A key design consideration is input common-mode range. The LM324 does not behave like a rail-to-rail input amplifier, so input and output signals must remain within the usable linear region of the selected supply voltage. Input and output bypassing capacitors should be placed close to the appropriate device pins, and sensitive signal traces should be kept away from switching nodes and high-current return paths. This product page organizes the LM324DTB supply range, package information, pin assignment, equivalent-device considerations, and practical analog-layout guidance into a design-oriented reference. It also supports faster sourcing by linking engineers to the Request a Quote form for current commercial availability, volume information, and production requirements.

RFQ Kontak