ATMEGA329PA-AUR vs ATMEGA329P-20AU Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATMEGA329PA-AUR sa pamamagitan ng Microchip Technology at ATMEGA329P-20AU sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATMEGA329PA-AUR - 8-bit AVR MCU, 32KB Flash, 20MHz, 64-TQFP | Microchip
ATMEGA329PA-AUR ✓ NakahandaMicrochip Technology
ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64
ATMEGA329P-20AU ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATMEGA329PA-AUR | ATMEGA329P-20AU |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core Architecture | 8-bit AVR RISC (Harvard) | AVR (8-bit RISC, Harvard) |
| Family | ATmega (picoPower) | — |
| Program Memory (Flash) | 32 KB | 32 KB (16K x 16), In-System Programmable with RWW |
| EEPROM | 1 KB | 1 KB |
| SRAM | 2 KB | 2 KB (2K x 8) |
| Maximum CPU Speed | 20 MHz | — |
| Volte ng Pagbibigay | 2.7 V to 5.5 V (4.5 V to 5.5 V at 20 MHz) | — |
| General-Purpose I/O | 54 | — |
| Timers/Counters | Two 8-bit + One 16-bit | — |
| ADC | 8-channel, 10-bit | 10-bit, up to 8 single-ended channels |
| Serial Interfaces | USART, SPI, TWI (I2C) | — |
| LCD Controller | Up to 4x25 segments (integrated) | — |
| Temperature na Operasyon | -40C to +85C (Industrial) | -40C to +85C (industrial, -A suffix) |
| Packhaging | 64-pin TQFP (14x14 mm, 0.8 mm pitch) | 64-pin TQFP (14x14 mm, 0.8 mm pitch) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Programming Interface | JTAG / debugWIRE / ISP | — |
| Tindminan RoHS | Compliant | Compliant (Pb-free / Green) |
| Level ng MSL | 3 (168 hours) | — |
| Instruction Set | — | 131 instructions, mostly single-cycle |
| Maximum Clock Speed | — | 20 MHz |
| Throughput | — | Up to 20 MIPS at 20 MHz |
| Supply Voltage (Vcc) | — | 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V) |
| General-Purpose I/O Pins | — | 54 |
| General-Purpose Working Registers | — | 32 |
| PWM Channels | — | 6 |
| Communication Peripherals | — | 2x USART, 1x TWI (I2C), 1x SPI (also ISP) |
| Debug Interface | — | JTAG (IEEE 1149.1 compliant) |
| Power-Save Modes | — | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower) |
| QTouch Support | — | Yes (peripheral touch controller via library) |