ATSAMA5D35-EK vs ATSAMA5D2B-XULT Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAMA5D35-EK sa pamamagitan ng Microchip Technology at ATSAMA5D2B-XULT sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ NakahandaMicrochip Technology
ATSAMA5D2B-XULT - SAMA5D2 Xplained Ultra Kit | Microchip
ATSAMA5D2B-XULT ObsoletePagsanggunian na paghahambing
| Parametro | ATSAMA5D35-EK | ATSAMA5D2B-XULT |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Development Boards | Development Boards |
| Katayuan ng Lifecycle | Aktibo | Obsolete |
| Product Type | MPU Evaluation Board / Development Kit | Embedded MPU Evaluation Board / Xplained Ultra Kit |
| MPU Series | SAMA5D3 (ARM Cortex-A5) | — |
| Core Processor | ARM Cortex-A5 32-bit | — |
| Maximum CPU Clock | 536 MHz | — |
| Performance | 850 DMIPS | — |
| Internal SRAM | 128 KB | — |
| L1 Instruction Cache | 32 KB | — |
| L1 Data Cache | 32 KB | — |
| Floating Point Unit | Yes (VFPv4 + NEON) | — |
| On-board DRAM | 512 MB DDR2 | — |
| Flash Memory | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM | — |
| Ethernet | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 | 10/100 Mbps with on-board PHY |
| USB | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device | — |
| CAN | 2x CAN-FD controllers | — |
| LCD Controller | Integrated, supports up to 1920x1080 (HDMI bridge on board) | — |
| Cryptography | AES, SHA, TRNG hardware accelerators | — |
| Low-Power Mode Consumption | < 0.5 mW | — |
| Operating Temperature (industrial variants) | -40 C to +105 C | — |
| MPU Package (silicon) | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch | — |
| Board Form Factor | SAMA5D3-EK baseboard + SAMA5D35 module | — |
| Software Support | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal | — |
| Kit Contents | Board, cables, power supply | — |
| Tindminan RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Featured MPU | — | ATSAMA5D27B (SAMA5D2 family, ARM Cortex-A5) |
| MPU Core | — | ARM Cortex-A5, 32-bit, single-core |
| MPU Clock Speed | — | Up to 500 MHz |
| MPU Package (SiP) | — | 289-ball BGA |
| On-Package Memory | — | 128 MB DDR2 |
| External Flash | — | QSPI NOR flash (on-board) |
| USB Interfaces | — | USB 2.0 host + USB 2.0 device |
| SD/MMC | — | microSD socket + 4-bit SD/MMC interface |
| CAN Interfaces | — | 2 x CAN-FD |
| Expansion | — | Arduino R3, Xplained Pro, mikroBUS |
| Display | — | 24-bit TFT LCD connector |
| Pre-flashed OS | — | Linux demonstration image |